* Sea-Bird SBE 9 Data File:
* FileName = O:\CTD_DATA\Raw_Data\OT-24-02\073.hdr
* Software Version Seasave V 7.26.7.121
* Temperature SN = 5468
* Conductivity SN = 3937
* Number of Bytes Per Scan = 37
* Number of Voltage Words = 4
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Jun 23 2024 04:01:24
* NMEA Latitude = 29 16.27 N
* NMEA Longitude = 094 02.92 W
* NMEA UTC (Time) = Jun 23 2024 09:01:30
* Store Lat/Lon Data = Append to Every Scan
** Ship: OREGON II
** Cruise: 0352
** Station: 073
** Cast: 01
** Latitude: 29 16.27 N
** Longitude: 094 02.90 W
** SEAMAP Station Number: T1805
** Operator Initials: ANH
** Depth (meters): 15.6
* System UTC = Jun 23 2024 09:01:24
# nquan = 11
# nvalues = 13                          
# units = specified
# name 0 = t090C: Temperature [ITS-90, deg C]
# name 1 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
# name 2 = CStarTr0: Beam Transmission, WET Labs C-Star [%]
# name 3 = svCM: Sound Velocity [Chen-Millero, m/s]
# name 4 = sbeox0Mg/L: Oxygen, SBE 43 [mg/l]
# name 5 = sbeox0PS: Oxygen, SBE 43 [% saturation]
# name 6 = depSM: Depth [salt water, m]
# name 7 = sal00: Salinity, Practical [PSU]
# name 8 = density00: Density [density, kg/m^3]
# name 9 = nbin: Scans Per Bin
# name 10 = flag:
# span 0 =    29.0579,    29.1197       
# span 1 =     1.5182,     2.2379       
# span 2 =    25.3802,    37.5342       
# span 3 =    1543.87,    1544.27       
# span 4 =     5.8764,     6.2162       
# span 5 =     93.023,     98.318       
# span 6 =      2.000,     14.000       
# span 7 =    35.0963,    35.3879       
# span 8 =  1022.1097,  1022.3963       
# span 9 =         24,        131       
# span 10 = 0.0000e+00, 0.0000e+00      
# interval = meters: 1                  
# start_time = Jun 23 2024 04:01:24 [System UpLoad Time]
# bad_flag = -9.990e-29
# <Sensors count="13" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>5468</SerialNumber>
#       <CalibrationDate>29-Nov-23</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.29789944e-003</G>
#       <H>6.22006894e-004</H>
#       <I>1.85307954e-005</I>
#       <J>1.32540569e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>3937</SerialNumber>
#       <CalibrationDate>16-Nov-23</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.99056999e+000</G>
#         <H>1.56540807e+000</H>
#         <I>-5.33098999e-005</I>
#         <J>1.12389018e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>119691</SerialNumber>
#       <CalibrationDate>08-Nov-23</CalibrationDate>
#       <C1>-4.301149e+004</C1>
#       <C2>4.643826e-001</C2>
#       <C3>1.281660e-002</C3>
#       <D1>3.010800e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.007769e+001</T1>
#       <T2>-1.136330e-004</T2>
#       <T3>3.295840e-006</T3>
#       <T4>6.872380e-009</T4>
#       <Slope>0.99996072</Slope>
#       <Offset>-1.71198</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.281600e-002</AD590M>
#       <AD590B>-9.359120e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>5367</SerialNumber>
#       <CalibrationDate>03-Nov-10</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.35656460e-003</G>
#       <H>6.28350987e-004</H>
#       <I>1.98454967e-005</I>
#       <J>1.52902033e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>3765</SerialNumber>
#       <CalibrationDate>06-Nov-10</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.01562520e+001</G>
#         <H>1.54753052e+000</H>
#         <I>-1.97548103e-003</I>
#         <J>2.38155713e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>2146</SerialNumber>
#       <CalibrationDate>02-Dec-23</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>5.0370e-001</Soc>
#         <offset>-0.5057</offset>
#         <A>-5.8620e-003</A>
#         <B> 2.0743e-004</B>
#         <C>-2.8158e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.0700</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Free -->
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Oxygen, SBE 43, 2 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>2148</SerialNumber>
#       <CalibrationDate>26-Jan-24</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>5.0237e-001</Soc>
#         <offset>-0.5145</offset>
#         <A>-3.0161e-003</A>
#         <B> 1.0285e-004</B>
#         <C>-1.9832e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.1700</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>60758</SerialNumber>
#       <CalibrationDate>11-AUG-22</CalibrationDate>
#       <ScaleFactor>14.940</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Free -->
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Fluorometer, WET Labs ECO-AFL/FL -->
#     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
#       <SerialNumber>FLNTURTD-8626</SerialNumber>
#       <CalibrationDate>12/11/2023</CalibrationDate>
#       <ScaleFactor>1.50000000e+001</ScaleFactor>
#       <!-- Dark output -->
#       <Vblank>0.0640</Vblank>
#     </FluoroWetlabECO_AFL_FL_Sensor>
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Transmissometer, WET Labs C-Star -->
#     <WET_LabsCStar SensorID="71" >
#       <SerialNumber>CST-1445PR</SerialNumber>
#       <CalibrationDate>12/29/23</CalibrationDate>
#       <M>21.4970</M>
#       <B>-0.1500</B>
#       <PathLength>0.250</PathLength>
#     </WET_LabsCStar>
#   </sensor>
# </Sensors>
# datcnv_date = Jun 23 2024 08:59:07, 7.26.7.129 [datcnv_vars = 13]
# datcnv_in = O:\CTD_DATA\Working_Folder\OT2402\073.hex O:\CTD_DATA\Working_Folder\OT2402\073.XMLCON
# datcnv_skipover = 5078
# datcnv_ox_hysteresis_correction = yes
# alignctd_date = Jun 23 2024 08:59:25, 7.26.7.129
# alignctd_in = O:\CTD_DATA\Working_Folder\OT2402\073.cnv
# alignctd_adv = c0mS/cm 0.100, sbeox0V 3.000, c1mS/cm 0.100, sbeox1V 3.000, flECO-AFL 1.000, CStarTr0 1.000                                                                                                                         
# filter_date = Jun 23 2024 08:59:38, 7.26.7.129
# filter_in = O:\CTD_DATA\Working_Folder\OT2402\073A.cnv
# filter_low_pass_tc_A = 0.030
# filter_low_pass_tc_B = 0.150
# filter_low_pass_A_vars =
# filter_low_pass_B_vars = prDM
# loopedit_date = Jun 23 2024 08:59:51, 7.26.7.129
# loopedit_in = O:\CTD_DATA\Working_Folder\OT2402\073AF.cnv
# loopedit_minVelocity = 0.050                                                                                            
# loopedit_surfaceSoak: do not remove                                                                                     
# loopedit_excl_bad_scans = yes
# Derive_date = Jun 23 2024 09:00:14, 7.26.7.129 [derive_vars = 9]
# Derive_in = O:\CTD_DATA\Working_Folder\OT2402\073AFL.cnv O:\CTD_DATA\Working_Folder\OT2402\073.XMLCON
# derive_time_window_docdt = seconds: 2
# derive_ox_tau_correction = yes
# binavg_date = Jun 23 2024 09:00:25, 7.26.7.129
# binavg_in = O:\CTD_DATA\Working_Folder\OT2402\073AFLD.cnv
# binavg_bintype = meters
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_omit = 0
# binavg_min_scans_bin = 1
# binavg_max_scans_bin = 2147483647
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# strip_date = Jun 23 2024 09:00:50, 7.26.7.129
# strip_in = O:\CTD_DATA\Working_Folder\OT2402\073AFLDB.cnv
# file_type = ascii
*END*
    29.1064     2.2265    37.4021    1543.87     6.2054     98.148      2.000    35.0967  1022.1097        105 0.0000e+00
    29.1061     2.2142    36.8980    1543.88     6.2130     98.268      3.000    35.0963  1022.1138         53 0.0000e+00
    29.1064     2.2285    37.5342    1543.90     6.2162     98.318      4.000    35.0970  1022.1185         79 0.0000e+00
    29.1096     2.2033    37.3488    1543.92     6.1931     97.960      5.000    35.0988  1022.1231         36 0.0000e+00
    29.1085     2.2379    36.9804    1543.94     6.1651     97.516      6.000    35.1006  1022.1291         48 0.0000e+00
    29.1197     2.1852    37.0020    1544.01     6.1829     97.832      7.000    35.1310  1022.1525         45 0.0000e+00
    29.1197     2.0674    36.4048    1544.06     6.0949     96.455      8.000    35.1598  1022.1785         57 0.0000e+00
    29.1193     1.9561    34.9387    1544.11     6.0827     96.278      9.000    35.1915  1022.2067         37 0.0000e+00
    29.1169     1.9093    33.6079    1544.16     6.0503     95.784     10.000    35.2327  1022.2427         31 0.0000e+00
    29.1131     1.8525    32.8929    1544.20     6.0584     95.917     11.000    35.2545  1022.2647        108 0.0000e+00
    29.1077     1.8135    32.6659    1544.22     6.0171     95.265     12.000    35.2740  1022.2854         59 0.0000e+00
    29.0887     1.6870    30.2368    1544.24     5.9412     94.057     13.000    35.3169  1022.3283        131 0.0000e+00
    29.0579     1.5182    25.3802    1544.27     5.8764     93.023     14.000    35.3879  1022.3963         24 0.0000e+00