* Sea-Bird SBE 9 Data File:
* FileName = O:\CTD_DATA\Raw_Data\OT-24-02\071.hdr
* Software Version Seasave V 7.26.7.121
* Temperature SN = 5468
* Conductivity SN = 3937
* Number of Bytes Per Scan = 37
* Number of Voltage Words = 4
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Jun 22 2024 21:37:11
* NMEA Latitude = 29 24.85 N
* NMEA Longitude = 094 33.28 W
* NMEA UTC (Time) = Jun 23 2024 02:37:19
* Store Lat/Lon Data = Append to Every Scan
** Ship: OREGON II
** Cruise: 0352
** Station: 071
** Cast: 01
** Latitude: 29 24.89 N
** Longitude: 094 33.27 W
** SEAMAP Station Number: T1802
** Operator Initials: OLL
** Depth (meters): 10.66
* System UTC = Jun 23 2024 02:37:11
# nquan = 11
# nvalues = 8                           
# units = specified
# name 0 = t090C: Temperature [ITS-90, deg C]
# name 1 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
# name 2 = CStarTr0: Beam Transmission, WET Labs C-Star [%]
# name 3 = svCM: Sound Velocity [Chen-Millero, m/s]
# name 4 = sbeox0Mg/L: Oxygen, SBE 43 [mg/l]
# name 5 = sbeox0PS: Oxygen, SBE 43 [% saturation]
# name 6 = depSM: Depth [salt water, m]
# name 7 = sal00: Salinity, Practical [PSU]
# name 8 = density00: Density [density, kg/m^3]
# name 9 = nbin: Scans Per Bin
# name 10 = flag:
# span 0 =    29.2279,    29.6944       
# span 1 =     0.4697,     3.0979       
# span 2 =    -0.5502,    13.9572       
# span 3 =    1534.91,    1540.30       
# span 4 =     5.0072,     6.6569       
# span 5 =     77.743,    100.702       
# span 6 =      2.000,      9.000       
# span 7 =    25.3028,    31.3251       
# span 8 =  1014.5868,  1019.2693       
# span 9 =         16,        108       
# span 10 = 0.0000e+00, 0.0000e+00      
# interval = meters: 1                  
# start_time = Jun 22 2024 21:37:11 [System UpLoad Time]
# bad_flag = -9.990e-29
# <Sensors count="13" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>5468</SerialNumber>
#       <CalibrationDate>29-Nov-23</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.29789944e-003</G>
#       <H>6.22006894e-004</H>
#       <I>1.85307954e-005</I>
#       <J>1.32540569e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>3937</SerialNumber>
#       <CalibrationDate>16-Nov-23</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.99056999e+000</G>
#         <H>1.56540807e+000</H>
#         <I>-5.33098999e-005</I>
#         <J>1.12389018e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>119691</SerialNumber>
#       <CalibrationDate>08-Nov-23</CalibrationDate>
#       <C1>-4.301149e+004</C1>
#       <C2>4.643826e-001</C2>
#       <C3>1.281660e-002</C3>
#       <D1>3.010800e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.007769e+001</T1>
#       <T2>-1.136330e-004</T2>
#       <T3>3.295840e-006</T3>
#       <T4>6.872380e-009</T4>
#       <Slope>0.99996072</Slope>
#       <Offset>-1.71198</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.281600e-002</AD590M>
#       <AD590B>-9.359120e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>5367</SerialNumber>
#       <CalibrationDate>03-Nov-10</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.35656460e-003</G>
#       <H>6.28350987e-004</H>
#       <I>1.98454967e-005</I>
#       <J>1.52902033e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>3765</SerialNumber>
#       <CalibrationDate>06-Nov-10</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.01562520e+001</G>
#         <H>1.54753052e+000</H>
#         <I>-1.97548103e-003</I>
#         <J>2.38155713e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>2146</SerialNumber>
#       <CalibrationDate>02-Dec-23</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>5.0370e-001</Soc>
#         <offset>-0.5057</offset>
#         <A>-5.8620e-003</A>
#         <B> 2.0743e-004</B>
#         <C>-2.8158e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.0700</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Free -->
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Oxygen, SBE 43, 2 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>2148</SerialNumber>
#       <CalibrationDate>26-Jan-24</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>5.0237e-001</Soc>
#         <offset>-0.5145</offset>
#         <A>-3.0161e-003</A>
#         <B> 1.0285e-004</B>
#         <C>-1.9832e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.1700</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>60758</SerialNumber>
#       <CalibrationDate>11-AUG-22</CalibrationDate>
#       <ScaleFactor>14.940</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Free -->
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Fluorometer, WET Labs ECO-AFL/FL -->
#     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
#       <SerialNumber>FLNTURTD-8626</SerialNumber>
#       <CalibrationDate>12/11/2023</CalibrationDate>
#       <ScaleFactor>1.50000000e+001</ScaleFactor>
#       <!-- Dark output -->
#       <Vblank>0.0640</Vblank>
#     </FluoroWetlabECO_AFL_FL_Sensor>
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Transmissometer, WET Labs C-Star -->
#     <WET_LabsCStar SensorID="71" >
#       <SerialNumber>CST-1445PR</SerialNumber>
#       <CalibrationDate>12/29/23</CalibrationDate>
#       <M>21.4970</M>
#       <B>-0.1500</B>
#       <PathLength>0.250</PathLength>
#     </WET_LabsCStar>
#   </sensor>
# </Sensors>
# datcnv_date = Jun 23 2024 08:22:47, 7.26.7.129 [datcnv_vars = 13]
# datcnv_in = O:\CTD_DATA\Working_Folder\OT2402\071.hex O:\CTD_DATA\Working_Folder\OT2402\071.XMLCON
# datcnv_skipover = 4944
# datcnv_ox_hysteresis_correction = yes
# alignctd_date = Jun 23 2024 08:23:16, 7.26.7.129
# alignctd_in = O:\CTD_DATA\Working_Folder\OT2402\071.cnv
# alignctd_adv = c0mS/cm 0.100, sbeox0V 3.000, c1mS/cm 0.100, sbeox1V 3.000, flECO-AFL 1.000, CStarTr0 1.000                                                                                                                         
# filter_date = Jun 23 2024 08:23:36, 7.26.7.129
# filter_in = O:\CTD_DATA\Working_Folder\OT2402\071A.cnv
# filter_low_pass_tc_A = 0.030
# filter_low_pass_tc_B = 0.150
# filter_low_pass_A_vars =
# filter_low_pass_B_vars = prDM
# loopedit_date = Jun 23 2024 08:23:55, 7.26.7.129
# loopedit_in = O:\CTD_DATA\Working_Folder\OT2402\071AF.cnv
# loopedit_minVelocity = 0.050                                                                                            
# loopedit_surfaceSoak: do not remove                                                                                     
# loopedit_excl_bad_scans = yes
# Derive_date = Jun 23 2024 08:24:31, 7.26.7.129 [derive_vars = 9]
# Derive_in = O:\CTD_DATA\Working_Folder\OT2402\071AFL.cnv O:\CTD_DATA\Working_Folder\OT2402\071.XMLCON
# derive_time_window_docdt = seconds: 2
# derive_ox_tau_correction = yes
# binavg_date = Jun 23 2024 08:24:50, 7.26.7.129
# binavg_in = O:\CTD_DATA\Working_Folder\OT2402\071AFLD.cnv
# binavg_bintype = meters
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_omit = 0
# binavg_min_scans_bin = 1
# binavg_max_scans_bin = 2147483647
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# strip_date = Jun 23 2024 08:25:13, 7.26.7.129
# strip_in = O:\CTD_DATA\Working_Folder\OT2402\071AFLDB.cnv
# file_type = ascii
*END*
    29.6888     3.0979    13.9572    1534.91     6.6539    100.640      2.000    25.3028  1014.5868         56 0.0000e+00
    29.6881     3.0335    12.7998    1534.95     6.6569    100.702      3.000    25.3361  1014.6162         46 0.0000e+00
    29.6912     2.9692    11.7785    1535.03     6.6184    100.152      4.000    25.3839  1014.6552         65 0.0000e+00
    29.6944     2.9825    10.3607    1535.09     6.5724     99.479      5.000    25.4154  1014.6820         54 0.0000e+00
    29.6943     2.9162     9.5440    1535.13     6.4760     98.033      6.000    25.4420  1014.7062         61 0.0000e+00
    29.6537     2.6217     7.6650    1535.20     5.7705     87.367      7.000    25.5896  1014.8340         42 0.0000e+00
    29.4637     2.1575     3.9323    1536.59     5.3158     81.014      8.000    27.3624  1016.2250        108 0.0000e+00
    29.2279     0.4697    -0.5502    1540.30     5.0072     77.743      9.000    31.3251  1019.2693         16 0.0000e+00