* Sea-Bird SBE 9 Data File:
* FileName = C:\DATA\CTD\056_L1.hex
* Software Version Seasave V 7.26.0.7
* Temperature SN = 2305
* Conductivity SN = 1911
* Number of Bytes Per Scan = 45
* Number of Voltage Words = 4
* Number of Scans Averaged by the Deck Unit = 1
* Append System Time to Every Scan
* System UpLoad Time = May 09 2018 04:07:07
* NMEA Latitude = 38 38.98 N
* NMEA Longitude = 075 02.65 W
* NMEA UTC (Time) = May 09 2018  04:06:59
* Store Lat/Lon Data = Append to Every Scan
* SBE 11plus V 5.2
* number of scans to average = 1
* pressure baud rate = 9600
* NMEA baud rate = 4800
* GPIB address = 1
* advance primary conductivity  0.073 seconds
* advance secondary conductivity  0.073 seconds
* autorun on power up is disabled
* S>
** Ship:R/V Hugh R. Sharp
** Cruise Number:  HRS1802BP
** Station: 056_L1
** Latitude: 38 38.97 N
** Longitude: 075 02.64 W
* System UTC = May 09 2018 04:07:07
# nquan = 17
# nvalues = 9                           
# units = specified
# name 0 = latitude: Latitude [deg]
# name 1 = longitude: Longitude [deg]
# name 2 = t090C: Temperature [ITS-90, deg C]
# name 3 = c0S/m: Conductivity [S/m]
# name 4 = sal00: Salinity, Practical [PSU]
# name 5 = prDM: Pressure, Digiquartz [db]
# name 6 = depSM: Depth [salt water, m]
# name 7 = t190C: Temperature, 2 [ITS-90, deg C]
# name 8 = c1S/m: Conductivity, 2 [S/m]
# name 9 = sal11: Salinity, Practical, 2 [PSU]
# name 10 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
# name 11 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 12 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/kg]
# name 13 = altM: Altimeter [m]
# name 14 = pumps: Pump Status
# name 15 = nbin: number of scans per bin
# name 16 = flag: flag
# span 0 =   38.64964,   38.64966       
# span 1 =  -75.04414,  -75.04410       
# span 2 =    13.1788,    13.2852       
# span 3 =   2.629335,   3.453680       
# span 4 =    21.4626,    28.8082       
# span 5 =      0.996,      4.749       
# span 6 =      0.988,      4.713       
# span 7 =    13.1803,    13.2887       
# span 8 =   3.252104,   3.453731       
# span 9 =    26.8991,    28.8073       
# span 10 =     0.7601,     2.1210      
# span 11 =     5.9434,     6.3205      
# span 12 =    259.888,    276.958      
# span 13 =       3.42,       9.76      
# span 14 =          1,          1      
# span 15 =         22,        426      
# span 16 = 0.0000e+00, 0.0000e+00      
# interval = decibars: 1                
# start_time = May 09 2018 04:07:06 [NMEA time, first data scan]
# bad_flag = -9.990e-29
# <Sensors count="13" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>2305</SerialNumber>
#       <CalibrationDate>23-Dec-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.36616816e-003</G>
#       <H>6.45008867e-004</H>
#       <I>2.38672018e-005</I>
#       <J>2.29986986e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>1911</SerialNumber>
#       <CalibrationDate>28-Dec-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-3.93123243e+000</G>
#         <H>5.04055856e-001</H>
#         <I>-7.04990613e-004</I>
#         <J>6.17097446e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0445</SerialNumber>
#       <CalibrationDate>28-Dec-15</CalibrationDate>
#       <C1>-5.154178e+004</C1>
#       <C2>2.983901e-001</C2>
#       <C3>1.503120e-002</C3>
#       <D1>3.800900e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.012005e+001</T1>
#       <T2>-2.163007e-004</T2>
#       <T3>3.868910e-006</T3>
#       <T4>3.956470e-009</T4>
#       <Slope>0.99991303</Slope>
#       <Offset>1.83063</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.281230e-002</AD590M>
#       <AD590B>-9.403680e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>2572</SerialNumber>
#       <CalibrationDate>23-Dec-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.37484718e-003</G>
#       <H>6.44756180e-004</H>
#       <I>2.34111636e-005</I>
#       <J>2.19552821e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>2170</SerialNumber>
#       <CalibrationDate>29-Dec-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.03710268e+001</G>
#         <H>1.45110338e+000</H>
#         <I>-2.65316001e-003</I>
#         <J>2.58811936e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Fluorometer, WET Labs ECO-AFL/FL -->
#     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
#       <SerialNumber>FLNTURT-090</SerialNumber>
#       <CalibrationDate>16-Jan-16</CalibrationDate>
#       <ScaleFactor>9.00000000e+000</ScaleFactor>
#       <!-- Dark output -->
#       <Vblank>0.0750</Vblank>
#     </FluoroWetlabECO_AFL_FL_Sensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Free -->
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>0539</SerialNumber>
#       <CalibrationDate>23-Jun-17</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>4.6526e-001</Soc>
#         <offset>-0.4829</offset>
#         <A>-5.6593e-003</A>
#         <B> 2.7129e-004</B>
#         <C>-3.9145e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 0.7600</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Free -->
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Free -->
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>70022</SerialNumber>
#       <CalibrationDate>July 2016</CalibrationDate>
#       <ScaleFactor>15.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Free -->
#   </sensor>
# </Sensors>
# datcnv_date = Jun 13 2019 16:15:41, 7.23.2 [datcnv_vars = 15]
# datcnv_in = Z:\data\r2r\cruise\HRS1801\fileset\132217\data\056_l1.hex Z:\data\r2r\cruise\HRS1801\fileset\132217\data\056_l1.XMLCON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# datcnv_ox_tau_correction = yes
# binavg_date = Jun 13 2019 16:15:42, 7.23.2
# binavg_in = Z:\data\local\cruise\HRS1801\products\r2rctd\056_l1.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
   38.64966  -75.04412    13.2852   2.629335    21.4626      0.996      0.988    13.2887   3.252104    26.8991     0.7601     6.2974    276.958       9.76          1         22 0.0000e+00
   38.64966  -75.04412    13.2513   3.429428    28.5306      1.803      1.789    13.2583   3.427813    28.5104     1.8954     5.9434    259.888       7.36          1         98 0.0000e+00
   38.64966  -75.04410    13.2161   3.447355    28.7220      2.826      2.805    13.2168   3.447708    28.7247     2.0197     6.2553    273.484       6.37          1        426 0.0000e+00
   38.64966  -75.04410    13.2009   3.450604    28.7631      3.849      3.820    13.2198   3.447713    28.7221     2.0299     6.2867    274.848       6.37          1         81 0.0000e+00
   38.64964  -75.04413    13.1797   3.453492    28.8055      4.749      4.713    13.1803   3.453731    28.8073     2.1210     6.2853    274.777       4.89          1        280 0.0000e+00
   38.64964  -75.04414    13.1788   3.453680    28.8082      4.018      3.988    13.1830   3.453508    28.8034     2.0112     6.2982    275.340       4.91          1         29 0.0000e+00
   38.64964  -75.04412    13.1936   3.451330    28.7755      3.176      3.152    13.1953   3.451433    28.7753     1.9752     6.2954    275.226       5.00          1        224 0.0000e+00
   38.64964  -75.04410    13.2358   3.443897    28.6755      2.074      2.058    13.2287   3.445518    28.6958     1.9576     6.3162    276.156       4.82          1        256 0.0000e+00
   38.64964  -75.04410    13.2623   3.439846    28.6184      1.381      1.370    13.2665   3.439561    28.6126     1.8389     6.3205    276.358       3.42          1         76 0.0000e+00