* Sea-Bird SBE 9 Data File:
* FileName = C:\DATA\CTD\012_L1.hex
* Software Version Seasave V 7.26.0.7
* Temperature SN = 2305
* Conductivity SN = 1911
* Number of Bytes Per Scan = 45
* Number of Voltage Words = 4
* Number of Scans Averaged by the Deck Unit = 1
* Append System Time to Every Scan
* System UpLoad Time = Apr 29 2018 08:56:23
* NMEA Latitude = 38 39.02 N
* NMEA Longitude = 075 02.25 W
* NMEA UTC (Time) = Apr 29 2018  08:55:51
* Store Lat/Lon Data = Append to Every Scan
* SBE 11plus V 5.2
* number of scans to average = 1
* pressure baud rate = 9600
* NMEA baud rate = 4800
* GPIB address = 1
* advance primary conductivity  0.073 seconds
* advance secondary conductivity  0.073 seconds
* autorun on power up is disabled
* S>
** Ship:R/V Hugh R. Sharp
** Cruise Number:  HRS1802BP
** Station: 012_L1_SM1
** Latitude: 38 39.06 N
** Longitude: 075 02.39  W
* System UTC = Apr 29 2018 08:56:23
# nquan = 17
# nvalues = 11                          
# units = specified
# name 0 = latitude: Latitude [deg]
# name 1 = longitude: Longitude [deg]
# name 2 = t090C: Temperature [ITS-90, deg C]
# name 3 = c0S/m: Conductivity [S/m]
# name 4 = sal00: Salinity, Practical [PSU]
# name 5 = prDM: Pressure, Digiquartz [db]
# name 6 = depSM: Depth [salt water, m]
# name 7 = t190C: Temperature, 2 [ITS-90, deg C]
# name 8 = c1S/m: Conductivity, 2 [S/m]
# name 9 = sal11: Salinity, Practical, 2 [PSU]
# name 10 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
# name 11 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 12 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/kg]
# name 13 = altM: Altimeter [m]
# name 14 = pumps: Pump Status
# name 15 = nbin: number of scans per bin
# name 16 = flag: flag
# span 0 =   38.65014,   38.65022       
# span 1 =  -75.03728,  -75.03713       
# span 2 =    11.7625,    11.7884       
# span 3 =   3.413204,   3.421031       
# span 4 =    29.5056,    29.5925       
# span 5 =      1.032,      5.800       
# span 6 =      1.024,      5.756       
# span 7 =    11.7650,    11.7900       
# span 8 =   3.417221,   3.421118       
# span 9 =    29.5427,    29.5913       
# span 10 =     1.1921,     1.3233      
# span 11 =     5.9069,     6.1345      
# span 12 =    258.018,    267.976      
# span 13 =       4.55,       8.86      
# span 14 =          1,          1      
# span 15 =         20,        444      
# span 16 = 0.0000e+00, 0.0000e+00      
# interval = decibars: 1                
# start_time = Apr 29 2018 08:56:23 [NMEA time, first data scan]
# bad_flag = -9.990e-29
# <Sensors count="13" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>2305</SerialNumber>
#       <CalibrationDate>23-Dec-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.36616816e-003</G>
#       <H>6.45008867e-004</H>
#       <I>2.38672018e-005</I>
#       <J>2.29986986e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>1911</SerialNumber>
#       <CalibrationDate>28-Dec-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-3.93123243e+000</G>
#         <H>5.04055856e-001</H>
#         <I>-7.04990613e-004</I>
#         <J>6.17097446e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0445</SerialNumber>
#       <CalibrationDate>28-Dec-15</CalibrationDate>
#       <C1>-5.154178e+004</C1>
#       <C2>2.983901e-001</C2>
#       <C3>1.503120e-002</C3>
#       <D1>3.800900e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.012005e+001</T1>
#       <T2>-2.163007e-004</T2>
#       <T3>3.868910e-006</T3>
#       <T4>3.956470e-009</T4>
#       <Slope>0.99991303</Slope>
#       <Offset>1.83063</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.281230e-002</AD590M>
#       <AD590B>-9.403680e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>2572</SerialNumber>
#       <CalibrationDate>23-Dec-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.37484718e-003</G>
#       <H>6.44756180e-004</H>
#       <I>2.34111636e-005</I>
#       <J>2.19552821e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>2170</SerialNumber>
#       <CalibrationDate>29-Dec-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.03710268e+001</G>
#         <H>1.45110338e+000</H>
#         <I>-2.65316001e-003</I>
#         <J>2.58811936e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Fluorometer, WET Labs ECO-AFL/FL -->
#     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
#       <SerialNumber>FLNTURT-090</SerialNumber>
#       <CalibrationDate>16-Jan-16</CalibrationDate>
#       <ScaleFactor>9.00000000e+000</ScaleFactor>
#       <!-- Dark output -->
#       <Vblank>0.0750</Vblank>
#     </FluoroWetlabECO_AFL_FL_Sensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Free -->
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>0539</SerialNumber>
#       <CalibrationDate>23-Jun-17</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>4.6526e-001</Soc>
#         <offset>-0.4829</offset>
#         <A>-5.6593e-003</A>
#         <B> 2.7129e-004</B>
#         <C>-3.9145e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 0.7600</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Free -->
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Free -->
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>70022</SerialNumber>
#       <CalibrationDate>July 2016</CalibrationDate>
#       <ScaleFactor>15.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Free -->
#   </sensor>
# </Sensors>
# datcnv_date = Jun 13 2019 16:17:40, 7.23.2 [datcnv_vars = 15]
# datcnv_in = Z:\data\r2r\cruise\HRS1801\fileset\132217\data\012_l1.hex Z:\data\r2r\cruise\HRS1801\fileset\132217\data\012_l1.XMLCON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# datcnv_ox_tau_correction = yes
# binavg_date = Jun 13 2019 16:17:42, 7.23.2
# binavg_in = Z:\data\local\cruise\HRS1801\products\r2rctd\012_l1.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
   38.65022  -75.03728    11.7884   3.413204    29.5056      1.330      1.320    11.7900   3.417221    29.5427     1.1937     6.1345    267.976       8.86          1         20 0.0000e+00
   38.65019  -75.03724    11.7808   3.419837    29.5750      1.778      1.765    11.7831   3.421072    29.5850     1.2438     5.9069    258.018       8.25          1        444 0.0000e+00
   38.65016  -75.03719    11.7653   3.420033    29.5888      2.753      2.732    11.7670   3.420119    29.5883     1.3233     5.9656    260.580       7.35          1        136 0.0000e+00
   38.65016  -75.03718    11.7625   3.419867    29.5891      3.814      3.785    11.7657   3.420071    29.5885     1.3050     5.9858    261.459       6.41          1        167 0.0000e+00
   38.65015  -75.03716    11.7684   3.420539    29.5905      4.759      4.723    11.7681   3.420425    29.5896     1.3061     5.9901    261.648       5.55          1        132 0.0000e+00
   38.65015  -75.03716    11.7654   3.420365    29.5907      5.800      5.756    11.7685   3.420455    29.5892     1.3004     6.0213    263.011       4.55          1        160 0.0000e+00
   38.65014  -75.03714    11.7653   3.420334    29.5908      5.097      5.058    11.7684   3.420518    29.5901     1.2801     6.0406    263.854       4.64          1        172 0.0000e+00
   38.65014  -75.03714    11.7691   3.420659    29.5913      4.178      4.147    11.7711   3.420723    29.5903     1.3070     6.0610    264.745       5.68          1        194 0.0000e+00
   38.65014  -75.03713    11.7726   3.421031    29.5924      3.173      3.150    11.7750   3.421118    29.5913     1.2651     6.0693    265.108       6.78          1        127 0.0000e+00
   38.65016  -75.03714    11.7652   3.420325    29.5920      2.043      2.028    11.7650   3.420207    29.5910     1.2174     6.0756    265.382       6.80          1        392 0.0000e+00
   38.65018  -75.03714    11.7693   3.420680    29.5925      1.032      1.024    11.7706   3.420639    29.5911     1.1921     6.0825    265.686       5.20          1         95 0.0000e+00