* Sea-Bird SBE 9 Data File:
* FileName = C:\DATA\CTD\008_J3.hex
* Software Version Seasave V 7.26.0.7
* Temperature SN = 2305
* Conductivity SN = 1911
* Number of Bytes Per Scan = 45
* Number of Voltage Words = 4
* Number of Scans Averaged by the Deck Unit = 1
* Append System Time to Every Scan
* System UpLoad Time = Apr 29 2018 05:26:50
* NMEA Latitude = 38 40.78 N
* NMEA Longitude = 074 46.63 W
* NMEA UTC (Time) = Apr 29 2018  05:26:39
* Store Lat/Lon Data = Append to Every Scan
* SBE 11plus V 5.2
* number of scans to average = 1
* pressure baud rate = 9600
* NMEA baud rate = 4800
* GPIB address = 1
* advance primary conductivity  0.073 seconds
* advance secondary conductivity  0.073 seconds
* autorun on power up is disabled
* S>
** Ship:R/V Hugh R. Sharp
** Cruise Number:  HRS1802BP
** Station: 008_J3
** Latitude: 38 40.79 N
** Longitude: 074 46.63 W
* System UTC = Apr 29 2018 05:26:50
# nquan = 17
# nvalues = 11                          
# units = specified
# name 0 = latitude: Latitude [deg]
# name 1 = longitude: Longitude [deg]
# name 2 = t090C: Temperature [ITS-90, deg C]
# name 3 = c0S/m: Conductivity [S/m]
# name 4 = sal00: Salinity, Practical [PSU]
# name 5 = prDM: Pressure, Digiquartz [db]
# name 6 = depSM: Depth [salt water, m]
# name 7 = t190C: Temperature, 2 [ITS-90, deg C]
# name 8 = c1S/m: Conductivity, 2 [S/m]
# name 9 = sal11: Salinity, Practical, 2 [PSU]
# name 10 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
# name 11 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 12 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/kg]
# name 13 = altM: Altimeter [m]
# name 14 = pumps: Pump Status
# name 15 = nbin: number of scans per bin
# name 16 = flag: flag
# span 0 =   38.67930,   38.67961       
# span 1 =  -74.77706,  -74.77664       
# span 2 =     9.6507,     9.8821       
# span 3 =   3.445754,   3.447455       
# span 4 =    31.4113,    31.6278       
# span 5 =      1.822,      6.896       
# span 6 =      1.808,      6.844       
# span 7 =     9.6575,     9.8864       
# span 8 =   3.445865,   3.447470       
# span 9 =    31.4087,    31.6214       
# span 10 =     1.1146,     1.2532      
# span 11 =     5.4756,     6.0237      
# span 12 =    238.747,    262.667      
# span 13 =       2.20,       8.41      
# span 14 =          1,          1      
# span 15 =         38,        299      
# span 16 = 0.0000e+00, 0.0000e+00      
# interval = decibars: 1                
# start_time = Apr 29 2018 05:26:50 [NMEA time, first data scan]
# bad_flag = -9.990e-29
# <Sensors count="13" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>2305</SerialNumber>
#       <CalibrationDate>23-Dec-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.36616816e-003</G>
#       <H>6.45008867e-004</H>
#       <I>2.38672018e-005</I>
#       <J>2.29986986e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>1911</SerialNumber>
#       <CalibrationDate>28-Dec-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-3.93123243e+000</G>
#         <H>5.04055856e-001</H>
#         <I>-7.04990613e-004</I>
#         <J>6.17097446e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0445</SerialNumber>
#       <CalibrationDate>28-Dec-15</CalibrationDate>
#       <C1>-5.154178e+004</C1>
#       <C2>2.983901e-001</C2>
#       <C3>1.503120e-002</C3>
#       <D1>3.800900e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.012005e+001</T1>
#       <T2>-2.163007e-004</T2>
#       <T3>3.868910e-006</T3>
#       <T4>3.956470e-009</T4>
#       <Slope>0.99991303</Slope>
#       <Offset>1.83063</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.281230e-002</AD590M>
#       <AD590B>-9.403680e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>2572</SerialNumber>
#       <CalibrationDate>23-Dec-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.37484718e-003</G>
#       <H>6.44756180e-004</H>
#       <I>2.34111636e-005</I>
#       <J>2.19552821e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>2170</SerialNumber>
#       <CalibrationDate>29-Dec-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.03710268e+001</G>
#         <H>1.45110338e+000</H>
#         <I>-2.65316001e-003</I>
#         <J>2.58811936e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Fluorometer, WET Labs ECO-AFL/FL -->
#     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
#       <SerialNumber>FLNTURT-090</SerialNumber>
#       <CalibrationDate>16-Jan-16</CalibrationDate>
#       <ScaleFactor>9.00000000e+000</ScaleFactor>
#       <!-- Dark output -->
#       <Vblank>0.0750</Vblank>
#     </FluoroWetlabECO_AFL_FL_Sensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Free -->
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>0539</SerialNumber>
#       <CalibrationDate>23-Jun-17</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>4.6526e-001</Soc>
#         <offset>-0.4829</offset>
#         <A>-5.6593e-003</A>
#         <B> 2.7129e-004</B>
#         <C>-3.9145e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 0.7600</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Free -->
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Free -->
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>70022</SerialNumber>
#       <CalibrationDate>July 2016</CalibrationDate>
#       <ScaleFactor>15.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Free -->
#   </sensor>
# </Sensors>
# datcnv_date = Jun 13 2019 16:11:52, 7.23.2 [datcnv_vars = 15]
# datcnv_in = Z:\data\r2r\cruise\HRS1801\fileset\132217\data\008_j3.hex Z:\data\r2r\cruise\HRS1801\fileset\132217\data\008_j3.XMLCON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# datcnv_ox_tau_correction = yes
# binavg_date = Jun 13 2019 16:11:52, 7.23.2
# binavg_in = Z:\data\local\cruise\HRS1801\products\r2rctd\008_j3.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
   38.67961  -74.77706     9.8821   3.445874    31.4113      1.822      1.808     9.8864   3.445987    31.4087     1.1146     5.7868    252.339       2.20          1         60 0.0000e+00
   38.67951  -74.77698     9.8779   3.445754    31.4133      2.826      2.804     9.8789   3.445865    31.4136     1.1657     5.9994    261.612       3.45          1        285 0.0000e+00
   38.67944  -74.77692     9.8624   3.445846    31.4273      3.932      3.903     9.8580   3.445990    31.4326     1.1449     6.0237    262.667       4.73          1        157 0.0000e+00
   38.67942  -74.77689     9.8271   3.446277    31.4621      4.956      4.919     9.8271   3.446358    31.4628     1.1462     5.9945    261.382       7.01          1        141 0.0000e+00
   38.67940  -74.77687     9.7228   3.447092    31.5612      5.914      5.869     9.7142   3.447245    31.5703     1.1697     5.9493    259.389       6.05          1        162 0.0000e+00
   38.67939  -74.77684     9.6507   3.447455    31.6278      6.896      6.844     9.6695   3.447457    31.6112     1.2304     5.9844    260.902       5.08          1         87 0.0000e+00
   38.67937  -74.77681     9.6647   3.447195    31.6132      6.094      6.048     9.6575   3.447386    31.6214     1.2037     5.8733    256.062       5.34          1         75 0.0000e+00
   38.67934  -74.77678     9.7130   3.447008    31.5693      5.052      5.014     9.7248   3.447018    31.5590     1.2532     5.6291    245.428       6.52          1         97 0.0000e+00
   38.67933  -74.77675     9.7718   3.446577    31.5138      4.070      4.039     9.7648   3.446748    31.5216     1.2250     5.4756    238.747       7.54          1        162 0.0000e+00
   38.67932  -74.77673     9.7934   3.446477    31.4944      2.913      2.891     9.7989   3.446520    31.4900     1.1483     5.4988    239.761       8.41          1         38 0.0000e+00
   38.67930  -74.77664     9.7798   3.447389    31.5158      2.282      2.264     9.7848   3.447470    31.5122     1.1860     5.5908    243.767       4.89          1        299 0.0000e+00