* Sea-Bird SBE 9 Data File:
* FileName = C:\CTD\Cruise_Data\WS18120_Kebble\WS18120STN51.hex
* Software Version Seasave V 7.23.2
* Temperature SN = 2659 MTGID176
* Conductivity SN = 1876-MTGID90
* Number of Bytes Per Scan = 40
* Number of Voltage Words = 5
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = May 02 2018 19:16:07
* NMEA Latitude = 25 27.18 N
* NMEA Longitude = 081 18.48 W
* NMEA UTC (Time) = May 02 2018  19:16:06
* Store Lat/Lon Data = Append to Every Scan
* SBE 11plus V 5.1g
* number of scans to average = 1
* pressure baud rate = 9600
* NMEA baud rate = 4800
* surface PAR voltage added to scan
* A/D offset = 4
* Latitude/Longitude added to scan
* GPIB address = 1
* advance primary conductivity  0.073 seconds
* advance secondary conductivity  0.073 seconds
* autorun on power up is disabled
* S>
** Ship: R/V FG Walton Smith
** Florida Straits Cable Calibration
** FC1804 - April 2018
* System UTC = May 02 2018 19:16:07
# nquan = 20
# nvalues = 6                           
# units = specified
# name 0 = latitude: Latitude [deg]
# name 1 = longitude: Longitude [deg]
# name 2 = t090C: Temperature [ITS-90, deg C]
# name 3 = c0S/m: Conductivity [S/m]
# name 4 = sal00: Salinity, Practical [PSU]
# name 5 = prDM: Pressure, Digiquartz [db]
# name 6 = depSM: Depth [salt water, m]
# name 7 = t190C: Temperature, 2 [ITS-90, deg C]
# name 8 = c1S/m: Conductivity, 2 [S/m]
# name 9 = sal11: Salinity, Practical, 2 [PSU]
# name 10 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 11 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/kg]
# name 12 = altM: Altimeter [m]
# name 13 = par: PAR/Irradiance, Biospherical/Licor
# name 14 = flSP: Fluorescence, Seapoint
# name 15 = xmiss: Beam Transmission, Chelsea/Seatech [%]
# name 16 = spar: SPAR/Surface Irradiance
# name 17 = pumps: Pump Status
# name 18 = nbin: number of scans per bin
# name 19 = flag: flag
# span 0 =   25.45296,   25.45300       
# span 1 =  -81.30849,  -81.30818       
# span 2 =    26.3844,    26.4060       
# span 3 =   5.693704,   5.710638       
# span 4 =    36.7504,    36.8575       
# span 5 =      2.270,      4.534       
# span 6 =      2.256,      4.504       
# span 7 =    26.3752,    26.4950       
# span 8 =   5.692893,   5.727305       
# span 9 =    36.7520,    36.9080       
# span 10 =     4.0300,     4.7856      
# span 11 =    175.714,    208.670      
# span 12 =       1.43,       3.25      
# span 13 = 1.0140e+03, 2.2282e+03      
# span 14 = 1.2111e+00, 1.6761e+00      
# span 15 =    69.6214,    73.7209      
# span 16 = 0.0000e+00, 0.0000e+00      
# span 17 =          1,          1      
# span 18 =          1,       2284      
# span 19 = 0.0000e+00, 0.0000e+00      
# interval = decibars: 1                
# start_time = May 02 2018 19:16:06 [NMEA time, header]
# bad_flag = -9.990e-29
# <Sensors count="15" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>2659 MTGID176</SerialNumber>
#       <CalibrationDate>22-Aug-17</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.38700170e-003</G>
#       <H>6.40603481e-004</H>
#       <I>2.08755585e-005</I>
#       <J>1.65837053e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>1876-MTGID90</SerialNumber>
#       <CalibrationDate>15-Aug-17</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.04362013e+001</G>
#         <H>1.63708875e+000</H>
#         <I>-1.38432013e-003</I>
#         <J>2.01564037e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0692 MTGID193</SerialNumber>
#       <CalibrationDate>31-Aug-17</CalibrationDate>
#       <C1>-5.115871e+004</C1>
#       <C2>-7.101298e-001</C2>
#       <C3>1.630870e-002</C3>
#       <D1>4.025000e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.009009e+001</T1>
#       <T2>-4.846586e-004</T2>
#       <T3>4.249670e-006</T3>
#       <T4>3.078010e-009</T4>
#       <Slope>0.99986212</Slope>
#       <Offset>-0.10787</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.293700e-002</AD590M>
#       <AD590B>-9.237969e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4097 MTGID177</SerialNumber>
#       <CalibrationDate>17-Aug-17</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.41177581e-003</G>
#       <H>6.45853569e-004</H>
#       <I>2.32367768e-005</I>
#       <J>2.11769422e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>2870 MTGID64</SerialNumber>
#       <CalibrationDate>08-Aug-17</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.96305343e+000</G>
#         <H>1.34656730e+000</H>
#         <I>1.61974269e-004</I>
#         <J>5.52511740e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>0053</SerialNumber>
#       <CalibrationDate>26-Aug-17</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>4.5049e-001</Soc>
#         <offset>-0.4871</offset>
#         <A>-3.7635e-003</A>
#         <B> 1.5499e-004</B>
#         <C>-2.2857e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.0200</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Free -->
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>MTG #2206 PSA-916</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>15.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, PAR/Irradiance, Biospherical/Licor -->
#     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
#       <SerialNumber>4720 MTGID: 590</SerialNumber>
#       <CalibrationDate>31 January 2018</CalibrationDate>
#       <M>1.00000000</M>
#       <B>0.00000000</B>
#       <CalibrationConstant>1010000000.00000000</CalibrationConstant>
#       <Multiplier>1.00000000</Multiplier>
#       <Offset>-1.49003000</Offset>
#     </PAR_BiosphericalLicorChelseaSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Free -->
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Fluorometer, Seapoint -->
#     <FluoroSeapointSensor SensorID="11" >
#       <SerialNumber>2403 MTGID107</SerialNumber>
#       <CalibrationDate>6 February 2018</CalibrationDate>
#       <!-- The following is an array index, not the actual gain setting. -->
#       <GainSetting>2</GainSetting>
#       <Offset>0.000</Offset>
#     </FluoroSeapointSensor>
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Transmissometer, Chelsea/Seatech -->
#     <TransChelseaSeatechWetlabCStarSensor SensorID="59" >
#       <SerialNumber>CST-721DR MTGID213</SerialNumber>
#       <CalibrationDate>27 April 2018</CalibrationDate>
#       <M>21.8050</M>
#       <B>-1.2510</B>
#       <PathLength>0.250</PathLength>
#     </TransChelseaSeatechWetlabCStarSensor>
#   </sensor>
#   <sensor Channel="14" >
#     <!-- SPAR voltage, Unavailable -->
#   </sensor>
#   <sensor Channel="15" >
#     <!-- SPAR voltage, SPAR/Surface Irradiance -->
#     <SPAR_Sensor SensorID="51" >
#       <SerialNumber>20146 MTGID: 32</SerialNumber>
#       <CalibrationDate>26 January 2017</CalibrationDate>
#       <ConversionFactor>1547.71969000</ConversionFactor>
#       <RatioMultiplier>0.00000000</RatioMultiplier>
#     </SPAR_Sensor>
#   </sensor>
# </Sensors>
# datcnv_date = Jul 03 2019 18:25:23, 7.23.2 [datcnv_vars = 18]
# datcnv_in = Z:\data\r2r\cruise\WS18120\fileset\132445\data\ws18120stn51.hex Z:\data\r2r\cruise\WS18120\fileset\132445\data\ws18120stn51.XMLCON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# datcnv_ox_tau_correction = yes
# binavg_date = Jul 03 2019 18:25:26, 7.23.2
# binavg_in = Z:\data\local\cruise\WS18120\products\r2rctd\ws18120stn51.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
   25.45300  -81.30818    26.4060   5.710638    36.8575      2.873      2.854    26.4950   5.727305    36.9080     4.0300    175.714       1.92 2.0496e+03 1.3207e+00    73.0425 0.0000e+00          1       2284 0.0000e+00
   25.45296  -81.30837    26.3875   5.694056    36.7513      3.903      3.878    26.3793   5.693358    36.7527     4.7786    208.365       1.79 1.3563e+03 1.6341e+00    71.9055 0.0000e+00          1        739 0.0000e+00
   25.45296  -81.30842    26.3898   5.694366    36.7514      4.534      4.504    26.3785   5.693198    36.7520     4.7854    208.659       1.44 1.0140e+03 1.5629e+00    70.7135 0.0000e+00          1          1 0.0000e+00
   25.45296  -81.30842    26.3844   5.693704    36.7510      4.273      4.246    26.3752   5.692893    36.7524     4.7856    208.670       1.43 1.1004e+03 1.6761e+00    69.6214 0.0000e+00          1        219 0.0000e+00
   25.45296  -81.30844    26.3919   5.694439    36.7508      2.978      2.959    26.3850   5.693902    36.7524     4.7836    208.583       2.18 1.7390e+03 1.6366e+00    73.4116 0.0000e+00          1         73 0.0000e+00
   25.45296  -81.30849    26.3966   5.694879    36.7504      2.270      2.256    26.3865   5.694034    36.7524     4.7791    208.387       3.25 2.2282e+03 1.2111e+00    73.7209 0.0000e+00          1       1144 0.0000e+00