* Sea-Bird SBE 9 Data File:
* FileName = C:\CTD\Cruise_Data\WS18120_Kebble\WS18120STN16.hex
* Software Version Seasave V 7.23.2
* Temperature SN = 2659 MTGID176
* Conductivity SN = 1876-MTGID90
* Number of Bytes Per Scan = 40
* Number of Voltage Words = 5
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = May 01 2018 09:56:18
* NMEA Latitude = 24 40.29 N
* NMEA Longitude = 081 12.31 W
* NMEA UTC (Time) = May 01 2018  09:56:17
* Store Lat/Lon Data = Append to Every Scan
* SBE 11plus V 5.1g
* number of scans to average = 1
* pressure baud rate = 9600
* NMEA baud rate = 4800
* surface PAR voltage added to scan
* A/D offset = 4
* Latitude/Longitude added to scan
* GPIB address = 1
* advance primary conductivity  0.073 seconds
* advance secondary conductivity  0.073 seconds
* autorun on power up is disabled
* S>
** Ship: R/V FG Walton Smith
** Florida Straits Cable Calibration
** FC1804 - April 2018
* System UTC = May 01 2018 09:56:18
# nquan = 20
# nvalues = 6                           
# units = specified
# name 0 = latitude: Latitude [deg]
# name 1 = longitude: Longitude [deg]
# name 2 = t090C: Temperature [ITS-90, deg C]
# name 3 = c0S/m: Conductivity [S/m]
# name 4 = sal00: Salinity, Practical [PSU]
# name 5 = prDM: Pressure, Digiquartz [db]
# name 6 = depSM: Depth [salt water, m]
# name 7 = t190C: Temperature, 2 [ITS-90, deg C]
# name 8 = c1S/m: Conductivity, 2 [S/m]
# name 9 = sal11: Salinity, Practical, 2 [PSU]
# name 10 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 11 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/kg]
# name 12 = altM: Altimeter [m]
# name 13 = par: PAR/Irradiance, Biospherical/Licor
# name 14 = flSP: Fluorescence, Seapoint
# name 15 = xmiss: Beam Transmission, Chelsea/Seatech [%]
# name 16 = spar: SPAR/Surface Irradiance
# name 17 = pumps: Pump Status
# name 18 = nbin: number of scans per bin
# name 19 = flag: flag
# span 0 =   24.67138,   24.67151       
# span 1 =  -81.20540,  -81.20527       
# span 2 =    26.6185,    26.6329       
# span 3 =   5.722560,   5.725273       
# span 4 =    36.7750,    36.7838       
# span 5 =      0.814,      3.985       
# span 6 =      0.809,      3.959       
# span 7 =    26.6161,    26.6288       
# span 8 =   5.721861,   5.724324       
# span 9 =    36.7715,    36.7799       
# span 10 =     4.1117,     4.1310      
# span 11 =    179.295,    180.136      
# span 12 =       2.49,       5.15      
# span 13 = 2.5527e-01, 1.4982e+00      
# span 14 = 8.0376e-01, 1.3109e+00      
# span 15 =    87.1052,    90.0483      
# span 16 = 0.0000e+00, 0.0000e+00      
# span 17 =          1,          1      
# span 18 =         64,        715      
# span 19 = 0.0000e+00, 0.0000e+00      
# interval = decibars: 1                
# start_time = May 01 2018 09:56:17 [NMEA time, header]
# bad_flag = -9.990e-29
# <Sensors count="15" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>2659 MTGID176</SerialNumber>
#       <CalibrationDate>22-Aug-17</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.38700170e-003</G>
#       <H>6.40603481e-004</H>
#       <I>2.08755585e-005</I>
#       <J>1.65837053e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>1876-MTGID90</SerialNumber>
#       <CalibrationDate>15-Aug-17</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.04362013e+001</G>
#         <H>1.63708875e+000</H>
#         <I>-1.38432013e-003</I>
#         <J>2.01564037e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0692 MTGID193</SerialNumber>
#       <CalibrationDate>31-Aug-17</CalibrationDate>
#       <C1>-5.115871e+004</C1>
#       <C2>-7.101298e-001</C2>
#       <C3>1.630870e-002</C3>
#       <D1>4.025000e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.009009e+001</T1>
#       <T2>-4.846586e-004</T2>
#       <T3>4.249670e-006</T3>
#       <T4>3.078010e-009</T4>
#       <Slope>0.99986212</Slope>
#       <Offset>-0.10787</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.293700e-002</AD590M>
#       <AD590B>-9.237969e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4097 MTGID177</SerialNumber>
#       <CalibrationDate>17-Aug-17</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.41177581e-003</G>
#       <H>6.45853569e-004</H>
#       <I>2.32367768e-005</I>
#       <J>2.11769422e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>2870 MTGID64</SerialNumber>
#       <CalibrationDate>08-Aug-17</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.96305343e+000</G>
#         <H>1.34656730e+000</H>
#         <I>1.61974269e-004</I>
#         <J>5.52511740e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>0053</SerialNumber>
#       <CalibrationDate>26-Aug-17</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>4.5049e-001</Soc>
#         <offset>-0.4871</offset>
#         <A>-3.7635e-003</A>
#         <B> 1.5499e-004</B>
#         <C>-2.2857e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.0200</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Free -->
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>MTG #2206 PSA-916</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>15.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, PAR/Irradiance, Biospherical/Licor -->
#     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
#       <SerialNumber>4720 MTGID: 590</SerialNumber>
#       <CalibrationDate>31 January 2018</CalibrationDate>
#       <M>1.00000000</M>
#       <B>0.00000000</B>
#       <CalibrationConstant>1010000000.00000000</CalibrationConstant>
#       <Multiplier>1.00000000</Multiplier>
#       <Offset>-1.49003000</Offset>
#     </PAR_BiosphericalLicorChelseaSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Free -->
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Fluorometer, Seapoint -->
#     <FluoroSeapointSensor SensorID="11" >
#       <SerialNumber>2403 MTGID107</SerialNumber>
#       <CalibrationDate>6 February 2018</CalibrationDate>
#       <!-- The following is an array index, not the actual gain setting. -->
#       <GainSetting>2</GainSetting>
#       <Offset>0.000</Offset>
#     </FluoroSeapointSensor>
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Transmissometer, Chelsea/Seatech -->
#     <TransChelseaSeatechWetlabCStarSensor SensorID="59" >
#       <SerialNumber>CST-721DR MTGID213</SerialNumber>
#       <CalibrationDate>27 April 2018</CalibrationDate>
#       <M>21.8050</M>
#       <B>-1.2510</B>
#       <PathLength>0.250</PathLength>
#     </TransChelseaSeatechWetlabCStarSensor>
#   </sensor>
#   <sensor Channel="14" >
#     <!-- SPAR voltage, Unavailable -->
#   </sensor>
#   <sensor Channel="15" >
#     <!-- SPAR voltage, SPAR/Surface Irradiance -->
#     <SPAR_Sensor SensorID="51" >
#       <SerialNumber>20146 MTGID: 32</SerialNumber>
#       <CalibrationDate>26 January 2017</CalibrationDate>
#       <ConversionFactor>1547.71969000</ConversionFactor>
#       <RatioMultiplier>0.00000000</RatioMultiplier>
#     </SPAR_Sensor>
#   </sensor>
# </Sensors>
# datcnv_date = Jul 03 2019 18:26:33, 7.23.2 [datcnv_vars = 18]
# datcnv_in = Z:\data\r2r\cruise\WS18120\fileset\132445\data\ws18120stn16.hex Z:\data\r2r\cruise\WS18120\fileset\132445\data\ws18120stn16.XMLCON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# datcnv_ox_tau_correction = yes
# binavg_date = Jul 03 2019 18:26:36, 7.23.2
# binavg_in = Z:\data\local\cruise\WS18120\products\r2rctd\ws18120stn16.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
   24.67151  -81.20527    26.6329   5.725241    36.7826      1.945      1.932    26.6288   5.724324    36.7792     4.1148    179.428       4.33 5.8854e-01 1.3109e+00    90.0483 0.0000e+00          1        715 0.0000e+00
   24.67146  -81.20534    26.6313   5.725273    36.7838      3.077      3.057    26.6272   5.724283    36.7799     4.1117    179.295       3.47 3.6038e-01 8.2340e-01    89.8389 0.0000e+00          1         87 0.0000e+00
   24.67142  -81.20536    26.6251   5.723598    36.7763      3.985      3.959    26.6210   5.722657    36.7727     4.1283    180.018       2.49 2.5527e-01 8.1940e-01    89.9705 0.0000e+00          1        386 0.0000e+00
   24.67139  -81.20539    26.6232   5.723250    36.7756      3.018      2.998    26.6189   5.722220    36.7715     4.1219    179.738       3.24 3.7468e-01 8.1206e-01    90.0119 0.0000e+00          1         67 0.0000e+00
   24.67138  -81.20540    26.6219   5.722981    36.7750      2.116      2.102    26.6184   5.722128    36.7716     4.1310    180.136       4.04 5.4737e-01 8.0376e-01    89.9655 0.0000e+00          1         64 0.0000e+00
   24.67138  -81.20540    26.6185   5.722560    36.7750      0.814      0.809    26.6161   5.721861    36.7719     4.1238    179.822       5.15 1.4982e+00 8.1136e-01    87.1052 0.0000e+00          1         71 0.0000e+00