* Sea-Bird SBE 9 Data File:
* FileName = C:\CTD\Cruise_Data\WS18008_Kebble\WS18008_Stn_51.hex
* Software Version Seasave V 7.23.2
* Temperature SN = 4363
* Conductivity SN = 1466
* Number of Bytes Per Scan = 40
* Number of Voltage Words = 5
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Jan 11 2018 00:35:26
* NMEA Latitude = 25 27.24 N
* NMEA Longitude = 081 18.47 W
* NMEA UTC (Time) = Jan 11 2018  00:35:25
* Store Lat/Lon Data = Append to Every Scan
* SBE 11plus V 5.1g
* number of scans to average = 1
* pressure baud rate = 9600
* NMEA baud rate = 4800
* surface PAR voltage added to scan
* A/D offset = 4
* Latitude/Longitude added to scan
* GPIB address = 1
* advance primary conductivity  0.073 seconds
* advance secondary conductivity  0.073 seconds
* autorun on power up is disabled
* S>
** Ship: R/V FG Walton Smith
** Florida Straits Cable Calibration
** FC1607 - July 2016
* System UTC = Jan 11 2018 00:35:26
# nquan = 20
# nvalues = 7                           
# units = specified
# name 0 = latitude: Latitude [deg]
# name 1 = longitude: Longitude [deg]
# name 2 = t090C: Temperature [ITS-90, deg C]
# name 3 = c0S/m: Conductivity [S/m]
# name 4 = sal00: Salinity, Practical [PSU]
# name 5 = prDM: Pressure, Digiquartz [db]
# name 6 = depSM: Depth [salt water, m]
# name 7 = t190C: Temperature, 2 [ITS-90, deg C]
# name 8 = c1S/m: Conductivity, 2 [S/m]
# name 9 = sal11: Salinity, Practical, 2 [PSU]
# name 10 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 11 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/kg]
# name 12 = altM: Altimeter [m]
# name 13 = par: PAR/Irradiance, Biospherical/Licor
# name 14 = flSP: Fluorescence, Seapoint
# name 15 = xmiss: Beam Transmission, Chelsea/Seatech [%]
# name 16 = spar: SPAR/Surface Irradiance
# name 17 = pumps: Pump Status
# name 18 = nbin: number of scans per bin
# name 19 = flag: flag
# span 0 =   25.45408,   25.45424       
# span 1 =  -81.30777,  -81.30764       
# span 2 =    16.8760,    17.2094       
# span 3 =   4.412423,   4.416685       
# span 4 =    34.1846,    34.4489       
# span 5 =      1.682,      4.584       
# span 6 =      1.671,      4.554       
# span 7 =    16.8763,    17.1709       
# span 8 =   4.402163,   4.416976       
# span 9 =    34.0914,    34.4605       
# span 10 =     3.7614,     5.2930      
# span 11 =    163.904,    230.602      
# span 12 =       0.65,       3.42      
# span 13 = 4.5999e-02, 5.9202e-02      
# span 14 = 3.3904e+00, 3.5115e+00      
# span 15 =    73.4045,    74.1637      
# span 16 = 1.0494e+01, 1.1339e+01      
# span 17 =          0,          1      
# span 18 =         85,       1302      
# span 19 = 0.0000e+00, 0.0000e+00      
# interval = decibars: 1                
# start_time = Jan 11 2018 00:35:25 [NMEA time, header]
# bad_flag = -9.990e-29
# <Sensors count="15" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4363</SerialNumber>
#       <CalibrationDate>11-Jan-17</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.34864376e-003</G>
#       <H>6.47055301e-004</H>
#       <I>2.26650716e-005</I>
#       <J>1.82181637e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>1466</SerialNumber>
#       <CalibrationDate>17-Jan-17</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-3.97528353e+000</G>
#         <H>5.03087164e-001</H>
#         <I>-3.83194868e-004</I>
#         <J>4.46834861e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0441 MTG 190</SerialNumber>
#       <CalibrationDate>15-Apr-16</CalibrationDate>
#       <C1>-4.015605e+004</C1>
#       <C2>1.378820e-001</C2>
#       <C3>1.236610e-002</C3>
#       <D1>3.800600e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>2.999818e+001</T1>
#       <T2>-2.088650e-004</T2>
#       <T3>4.371440e-006</T3>
#       <T4>2.956770e-010</T4>
#       <Slope>0.99990000</Slope>
#       <Offset>4.56410</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.282050e-002</AD590M>
#       <AD590B>-9.996150e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4346</SerialNumber>
#       <CalibrationDate>14-Jan-17</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.38929421e-003</G>
#       <H>6.58449251e-004</H>
#       <I>2.41904195e-005</I>
#       <J>1.88318148e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>2855</SerialNumber>
#       <CalibrationDate>10-Jan-17</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.00431646e+001</G>
#         <H>1.39566530e+000</H>
#         <I>-5.07096898e-005</I>
#         <J>6.81348460e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Free -->
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>0641 MTG083</SerialNumber>
#       <CalibrationDate>14-Jan-17</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>3.2495e-001</Soc>
#         <offset>-0.7208</offset>
#         <A>-3.7135e-003</A>
#         <B> 1.3694e-004</B>
#         <C>-2.2390e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.1800</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>MTG #2206 PSA-916</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>15.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, PAR/Irradiance, Biospherical/Licor -->
#     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
#       <SerialNumber>70420 MTGID: 3119</SerialNumber>
#       <CalibrationDate>11 January 2017</CalibrationDate>
#       <M>1.00000000</M>
#       <B>0.00000000</B>
#       <CalibrationConstant>11700000000.00000000</CalibrationConstant>
#       <Multiplier>1.00000000</Multiplier>
#       <Offset>-0.08571000</Offset>
#     </PAR_BiosphericalLicorChelseaSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Free -->
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Fluorometer, Seapoint -->
#     <FluoroSeapointSensor SensorID="11" >
#       <SerialNumber>2812</SerialNumber>
#       <CalibrationDate>8 February 2017</CalibrationDate>
#       <!-- The following is an array index, not the actual gain setting. -->
#       <GainSetting>2</GainSetting>
#       <Offset>0.000</Offset>
#     </FluoroSeapointSensor>
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Transmissometer, Chelsea/Seatech -->
#     <TransChelseaSeatechWetlabCStarSensor SensorID="59" >
#       <SerialNumber>CST-1481PR</SerialNumber>
#       <CalibrationDate>6 January 2017</CalibrationDate>
#       <M>21.2460</M>
#       <B>-0.1060</B>
#       <PathLength>0.250</PathLength>
#     </TransChelseaSeatechWetlabCStarSensor>
#   </sensor>
#   <sensor Channel="14" >
#     <!-- SPAR voltage, Unavailable -->
#   </sensor>
#   <sensor Channel="15" >
#     <!-- SPAR voltage, SPAR/Surface Irradiance -->
#     <SPAR_Sensor SensorID="51" >
#       <SerialNumber>20146 MTGID: 32</SerialNumber>
#       <CalibrationDate>26 January 2017</CalibrationDate>
#       <ConversionFactor>1547.71969000</ConversionFactor>
#       <RatioMultiplier>0.00000000</RatioMultiplier>
#     </SPAR_Sensor>
#   </sensor>
# </Sensors>
# datcnv_date = Jul 03 2019 18:19:25, 7.23.2 [datcnv_vars = 18]
# datcnv_in = Z:\data\r2r\cruise\WS18008\fileset\132610\data\ws18008_stn_51.hex Z:\data\r2r\cruise\WS18008\fileset\132610\data\ws18008_stn_51.XMLCON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# datcnv_ox_tau_correction = yes
# binavg_date = Jul 03 2019 18:19:28, 7.23.2
# binavg_in = Z:\data\local\cruise\WS18008\products\r2rctd\ws18008_stn_51.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
   25.45408  -81.30777    17.2094   4.416685    34.1846      1.745      1.734    17.1709   4.402163    34.0914     3.7614    163.904       3.36 4.5999e-02 3.5115e+00    73.4045 1.1065e+01          0       1302 0.0000e+00
   25.45414  -81.30772    16.8806   4.415034    34.4489      2.995      2.975    16.8806   4.416356    34.4605     5.2568    229.016       2.25 5.7264e-02 3.4228e+00    73.9424 1.0553e+01          1         89 0.0000e+00
   25.45414  -81.30770    16.8760   4.414529    34.4481      4.034      4.008    16.8763   4.415892    34.4597     5.2347    228.052       1.30 5.6871e-02 3.4082e+00    73.4266 1.1339e+01          1         97 0.0000e+00
   25.45414  -81.30770    16.8803   4.414892    34.4474      4.584      4.554    16.8801   4.416238    34.4593     5.2498    228.711       0.65 5.8443e-02 3.3964e+00    73.6496 1.0983e+01          1        207 0.0000e+00
   25.45416  -81.30768    16.8958   4.414194    34.4282      4.025      3.999    16.8845   4.416354    34.4567     5.2589    229.111       1.01 5.8437e-02 3.3904e+00    73.5151 1.1339e+01          1         91 0.0000e+00
   25.45418  -81.30768    16.9290   4.412423    34.3846      3.042      3.022    16.9171   4.414256    34.4109     5.2684    229.536       1.96 5.9202e-02 3.4510e+00    73.8355 1.0494e+01          1         85 0.0000e+00
   25.45424  -81.30764    16.9347   4.415386    34.4061      1.682      1.671    16.9258   4.416976    34.4276     5.2930    230.602       3.42 5.6670e-02 3.4455e+00    74.1637 1.1019e+01          1        903 0.0000e+00