* Sea-Bird SBE 9 Data File:
* FileName = C:\CTD\Cruise_Data\WS18008_Kebble\WS18008_Stn_10.hex
* Software Version Seasave V 7.23.2
* Temperature SN = 4363
* Conductivity SN = 1466
* Number of Bytes Per Scan = 40
* Number of Voltage Words = 5
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Jan 09 2018 08:55:30
* NMEA Latitude = 24 47.32 N
* NMEA Longitude = 080 51.64 W
* NMEA UTC (Time) = Jan 09 2018  08:55:30
* Store Lat/Lon Data = Append to Every Scan
* SBE 11plus V 5.1g
* number of scans to average = 1
* pressure baud rate = 9600
* NMEA baud rate = 4800
* surface PAR voltage added to scan
* A/D offset = 4
* Latitude/Longitude added to scan
* GPIB address = 1
* advance primary conductivity  0.073 seconds
* advance secondary conductivity  0.073 seconds
* autorun on power up is disabled
* S>
** Ship: R/V FG Walton Smith
** Florida Straits Cable Calibration
** FC1607 - July 2016
* System UTC = Jan 09 2018 08:55:31
# nquan = 20
# nvalues = 6                           
# units = specified
# name 0 = latitude: Latitude [deg]
# name 1 = longitude: Longitude [deg]
# name 2 = t090C: Temperature [ITS-90, deg C]
# name 3 = c0S/m: Conductivity [S/m]
# name 4 = sal00: Salinity, Practical [PSU]
# name 5 = prDM: Pressure, Digiquartz [db]
# name 6 = depSM: Depth [salt water, m]
# name 7 = t190C: Temperature, 2 [ITS-90, deg C]
# name 8 = c1S/m: Conductivity, 2 [S/m]
# name 9 = sal11: Salinity, Practical, 2 [PSU]
# name 10 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 11 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/kg]
# name 12 = altM: Altimeter [m]
# name 13 = par: PAR/Irradiance, Biospherical/Licor
# name 14 = flSP: Fluorescence, Seapoint
# name 15 = xmiss: Beam Transmission, Chelsea/Seatech [%]
# name 16 = spar: SPAR/Surface Irradiance
# name 17 = pumps: Pump Status
# name 18 = nbin: number of scans per bin
# name 19 = flag: flag
# span 0 =   24.78888,   24.78898       
# span 1 =  -80.86104,  -80.86080       
# span 2 =    19.9052,    19.9506       
# span 3 =   4.887605,   4.899809       
# span 4 =    35.8663,    35.9287       
# span 5 =      1.461,      3.605       
# span 6 =      1.451,      3.582       
# span 7 =    19.9037,    19.9430       
# span 8 =   4.741848,   4.891573       
# span 9 =    34.6663,    35.8868       
# span 10 =     4.3896,     4.7902      
# span 11 =    191.170,    208.620      
# span 12 =       1.11,       3.25      
# span 13 = 2.0005e-02, 3.0080e-02      
# span 14 = 2.3218e+00, 2.3723e+00      
# span 15 =    55.0557,    56.1836      
# span 16 = 1.1339e+01, 1.1339e+01      
# span 17 =          1,          1      
# span 18 =         53,       2586      
# span 19 = 0.0000e+00, 0.0000e+00      
# interval = decibars: 1                
# start_time = Jan 09 2018 08:55:30 [NMEA time, header]
# bad_flag = -9.990e-29
# <Sensors count="15" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4363</SerialNumber>
#       <CalibrationDate>11-Jan-17</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.34864376e-003</G>
#       <H>6.47055301e-004</H>
#       <I>2.26650716e-005</I>
#       <J>1.82181637e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>1466</SerialNumber>
#       <CalibrationDate>17-Jan-17</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-3.97528353e+000</G>
#         <H>5.03087164e-001</H>
#         <I>-3.83194868e-004</I>
#         <J>4.46834861e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0441 MTG 190</SerialNumber>
#       <CalibrationDate>15-Apr-16</CalibrationDate>
#       <C1>-4.015605e+004</C1>
#       <C2>1.378820e-001</C2>
#       <C3>1.236610e-002</C3>
#       <D1>3.800600e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>2.999818e+001</T1>
#       <T2>-2.088650e-004</T2>
#       <T3>4.371440e-006</T3>
#       <T4>2.956770e-010</T4>
#       <Slope>0.99990000</Slope>
#       <Offset>4.56410</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.282050e-002</AD590M>
#       <AD590B>-9.996150e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4346</SerialNumber>
#       <CalibrationDate>14-Jan-17</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.38929421e-003</G>
#       <H>6.58449251e-004</H>
#       <I>2.41904195e-005</I>
#       <J>1.88318148e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>2855</SerialNumber>
#       <CalibrationDate>10-Jan-17</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.00431646e+001</G>
#         <H>1.39566530e+000</H>
#         <I>-5.07096898e-005</I>
#         <J>6.81348460e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Free -->
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>0641 MTG083</SerialNumber>
#       <CalibrationDate>14-Jan-17</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>3.2495e-001</Soc>
#         <offset>-0.7208</offset>
#         <A>-3.7135e-003</A>
#         <B> 1.3694e-004</B>
#         <C>-2.2390e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.1800</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>MTG #2206 PSA-916</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>15.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, PAR/Irradiance, Biospherical/Licor -->
#     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
#       <SerialNumber>70420 MTGID: 3119</SerialNumber>
#       <CalibrationDate>11 January 2017</CalibrationDate>
#       <M>1.00000000</M>
#       <B>0.00000000</B>
#       <CalibrationConstant>11700000000.00000000</CalibrationConstant>
#       <Multiplier>1.00000000</Multiplier>
#       <Offset>-0.08571000</Offset>
#     </PAR_BiosphericalLicorChelseaSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Free -->
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Fluorometer, Seapoint -->
#     <FluoroSeapointSensor SensorID="11" >
#       <SerialNumber>2812</SerialNumber>
#       <CalibrationDate>8 February 2017</CalibrationDate>
#       <!-- The following is an array index, not the actual gain setting. -->
#       <GainSetting>2</GainSetting>
#       <Offset>0.000</Offset>
#     </FluoroSeapointSensor>
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Transmissometer, Chelsea/Seatech -->
#     <TransChelseaSeatechWetlabCStarSensor SensorID="59" >
#       <SerialNumber>CST-1481PR</SerialNumber>
#       <CalibrationDate>6 January 2017</CalibrationDate>
#       <M>21.2460</M>
#       <B>-0.1060</B>
#       <PathLength>0.250</PathLength>
#     </TransChelseaSeatechWetlabCStarSensor>
#   </sensor>
#   <sensor Channel="14" >
#     <!-- SPAR voltage, Unavailable -->
#   </sensor>
#   <sensor Channel="15" >
#     <!-- SPAR voltage, SPAR/Surface Irradiance -->
#     <SPAR_Sensor SensorID="51" >
#       <SerialNumber>20146 MTGID: 32</SerialNumber>
#       <CalibrationDate>26 January 2017</CalibrationDate>
#       <ConversionFactor>1547.71969000</ConversionFactor>
#       <RatioMultiplier>0.00000000</RatioMultiplier>
#     </SPAR_Sensor>
#   </sensor>
# </Sensors>
# datcnv_date = Jul 03 2019 18:11:33, 7.23.2 [datcnv_vars = 18]
# datcnv_in = Z:\data\r2r\cruise\WS18008\fileset\132610\data\ws18008_stn_10.hex Z:\data\r2r\cruise\WS18008\fileset\132610\data\ws18008_stn_10.XMLCON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# datcnv_ox_tau_correction = yes
# binavg_date = Jul 03 2019 18:11:37, 7.23.2
# binavg_in = Z:\data\local\cruise\WS18008\products\r2rctd\ws18008_stn_10.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
   24.78888  -80.86080    19.9506   4.899809    35.9287      1.710      1.699    19.9430   4.741848    34.6663     4.3896    191.170       1.54 2.0005e-02 2.3218e+00    56.1836 1.1339e+01          1       2586 0.0000e+00
   24.78896  -80.86094    19.9055   4.887605    35.8663      2.954      2.935    19.9037   4.888810    35.8777     4.7874    208.499       1.82 2.6201e-02 2.3675e+00    55.5740 1.1339e+01          1         77 0.0000e+00
   24.78896  -80.86094    19.9052   4.887665    35.8668      3.605      3.582    19.9077   4.889453    35.8793     4.7787    208.121       1.11 2.6123e-02 2.3706e+00    55.0557 1.1339e+01          1         53 0.0000e+00
   24.78897  -80.86098    19.9144   4.889145    35.8712      3.202      3.181    19.9157   4.890784    35.8836     4.7902    208.620       1.37 2.6728e-02 2.3723e+00    55.2463 1.1339e+01          1        156 0.0000e+00
   24.78898  -80.86100    19.9193   4.889688    35.8719      2.086      2.072    19.9231   4.891573    35.8842     4.7844    208.367       2.39 2.7018e-02 2.3601e+00    55.5074 1.1339e+01          1        105 0.0000e+00
   24.78898  -80.86104    19.9191   4.890005    35.8749      1.461      1.451    19.9187   4.891391    35.8868     4.7887    208.554       3.25 3.0080e-02 2.3594e+00    55.6152 1.1339e+01          1        385 0.0000e+00