* Sea-Bird SBE 9 Data File:
* FileName = D:\CTD\SKQ201813S\SKQ201813S_ctd004.hex
* Software Version Seasave V 7.26.6.26
* Temperature SN = 4551
* Conductivity SN = 2251
* Number of Bytes Per Scan = 37
* Number of Voltage Words = 4
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Jun 07 2018 16:29:47
* NMEA Latitude = 63 17.72 N
* NMEA Longitude = 168 27.05 W
* NMEA UTC (Time) = Jun 07 2018  16:27:43
* Store Lat/Lon Data = Append to Every Scan
* SBE 11plus V 5.1b
* number of scans to average = 1
* pressure baud rate = 9600
* NMEA baud rate = 4800
* GPIB address = 1
* advance primary conductivity  0.073 seconds
* advance secondary conductivity  0.073 seconds
* S>
** Ship: R/V Sikuliaq
** Station Number: 004
** Station Name: CBE1
** Depth: 41
** Operator: SLD
** zoop cast 3
* System UTC = Jun 07 2018 16:29:47
# nquan = 19
# nvalues = 14                          
# units = specified
# name 0 = latitude: Latitude [deg]
# name 1 = longitude: Longitude [deg]
# name 2 = t090C: Temperature [ITS-90, deg C]
# name 3 = c0S/m: Conductivity [S/m]
# name 4 = sal00: Salinity, Practical [PSU]
# name 5 = prDM: Pressure, Digiquartz [db]
# name 6 = depSM: Depth [salt water, m]
# name 7 = t190C: Temperature, 2 [ITS-90, deg C]
# name 8 = c1S/m: Conductivity, 2 [S/m]
# name 9 = sal11: Salinity, Practical, 2 [PSU]
# name 10 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
# name 11 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 12 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/kg]
# name 13 = sbeox1ML/L: Oxygen, SBE 43, 2 [ml/l]
# name 14 = par: PAR/Irradiance, Biospherical/Licor
# name 15 = altM: Altimeter [m]
# name 16 = pumps: Pump Status
# name 17 = nbin: number of scans per bin
# name 18 = flag: flag
# span 0 =   63.29526,   63.29534       
# span 1 = -168.45124, -168.45099       
# span 2 =     1.7416,     1.7520       
# span 3 =   2.798436,   2.799886       
# span 4 =    31.7655,    31.7743       
# span 5 =      3.392,      9.733       
# span 6 =      3.359,      9.638       
# span 7 =     1.7403,     1.7503       
# span 8 =   2.798299,   2.800054       
# span 9 =    31.7648,    31.7781       
# span 10 =     7.2741,     9.2446      
# span 11 =     7.8405,     8.6887      
# span 12 =    341.483,    378.425      
# span 13 =     8.1857,     8.9868      
# span 14 = 2.7085e+00, 1.1919e+02      
# span 15 =      31.92,      37.65      
# span 16 =          1,          1      
# span 17 =         23,       2334      
# span 18 = 0.0000e+00, 0.0000e+00      
# interval = decibars: 1                
# start_time = Jun 07 2018 16:27:43 [NMEA time, header]
# bad_flag = -9.990e-29
# <Sensors count="13" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4551</SerialNumber>
#       <CalibrationDate>14-Dec-17</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.33662756e-003</G>
#       <H>6.33447815e-004</H>
#       <I>1.98171614e-005</I>
#       <J>1.57536659e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>2251</SerialNumber>
#       <CalibrationDate>07-Dec-17</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.03571618e+001</G>
#         <H>1.36284070e+000</H>
#         <I>-1.66190988e-003</I>
#         <J>1.95903380e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>1213</SerialNumber>
#       <CalibrationDate>13-Nov-14</CalibrationDate>
#       <C1>-4.132681e+004</C1>
#       <C2>-4.458463e-001</C2>
#       <C3>1.331500e-002</C3>
#       <D1>3.488900e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.032126e+001</T1>
#       <T2>-4.098790e-004</T2>
#       <T3>3.967810e-006</T3>
#       <T4>3.643750e-009</T4>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.280410e-002</AD590M>
#       <AD590B>-9.260115e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>6042</SerialNumber>
#       <CalibrationDate>13-Dec-17</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.34195083e-003</G>
#       <H>6.29488432e-004</H>
#       <I>1.96647926e-005</I>
#       <J>1.41161662e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>2272</SerialNumber>
#       <CalibrationDate>08-Dec-17</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.02572105e+001</G>
#         <H>1.37961328e+000</H>
#         <I>-2.22323866e-003</I>
#         <J>2.26563349e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Fluorometer, WET Labs ECO-AFL/FL -->
#     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
#       <SerialNumber>FLRTD-3090</SerialNumber>
#       <CalibrationDate>13-Jan-18</CalibrationDate>
#       <ScaleFactor>2.40000000e+001</ScaleFactor>
#       <!-- Dark output -->
#       <Vblank>0.0140</Vblank>
#     </FluoroWetlabECO_AFL_FL_Sensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, User Polynomial -->
#     <UserPolynomialSensor SensorID="61" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <SensorName>LISST-Deep</SensorName>
#       <A0>0.00000000</A0>
#       <A1>0.00000000</A1>
#       <A2>0.00000000</A2>
#       <A3>0.00000000</A3>
#     </UserPolynomialSensor>
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>2945</SerialNumber>
#       <CalibrationDate>23-Dec-17</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>4.7551e-001</Soc>
#         <offset>-0.4840</offset>
#         <A>-3.9778e-003</A>
#         <B> 1.5990e-004</B>
#         <C>-2.3619e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.0600</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Oxygen, SBE 43, 2 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>2153</SerialNumber>
#       <CalibrationDate>21-Feb-18</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>4.9027e-001</Soc>
#         <offset>-0.5025</offset>
#         <A>-3.3880e-003</A>
#         <B> 1.2470e-004</B>
#         <C>-1.7902e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.3000</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Transmissometer, WET Labs C-Star -->
#     <WET_LabsCStar SensorID="71" >
#       <SerialNumber>1681DR</SerialNumber>
#       <CalibrationDate>27-Jan-18</CalibrationDate>
#       <M>21.2807</M>
#       <B>-0.0260</B>
#       <PathLength>0.250</PathLength>
#     </WET_LabsCStar>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, PAR/Irradiance, Biospherical/Licor -->
#     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
#       <SerialNumber>4516</SerialNumber>
#       <CalibrationDate>6-Feb-18</CalibrationDate>
#       <M>1.00000000</M>
#       <B>0.00000000</B>
#       <CalibrationConstant>3921568627.45100021</CalibrationConstant>
#       <Multiplier>1.00000000</Multiplier>
#       <Offset>-0.35854212</Offset>
#     </PAR_BiosphericalLicorChelseaSensor>
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>7232.302492</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>15.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, User Polynomial, 2 -->
#     <UserPolynomialSensor SensorID="61" >
#       <SerialNumber>1049</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <SensorName>SUNA</SensorName>
#       <A0>-0.09500000</A0>
#       <A1>10.00000000</A1>
#       <A2>0.00000000</A2>
#       <A3>0.00000000</A3>
#     </UserPolynomialSensor>
#   </sensor>
# </Sensors>
# datcnv_date = Jul 03 2019 17:38:33, 7.23.2 [datcnv_vars = 17]
# datcnv_in = Z:\data\r2r\cruise\SKQ201813S\fileset\132159\data\skq201813s_ctd004.hex Z:\data\r2r\cruise\SKQ201813S\fileset\132159\data\skq201813s_ctd004.XMLCON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# datcnv_ox_tau_correction = yes
# binavg_date = Jul 03 2019 17:38:37, 7.23.2
# binavg_in = Z:\data\local\cruise\SKQ201813S\products\r2rctd\skq201813s_ctd004.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
   63.29534 -168.45099     1.7520   2.799886    31.7743      4.064      4.025     1.7503   2.800054    31.7781     8.0728     7.8405    341.483     8.1857 6.9177e+01      37.51          1        140 0.0000e+00
   63.29534 -168.45100     1.7430   2.798551    31.7663      4.836      4.789     1.7417   2.798392    31.7656     8.3802     8.6887    378.425     8.9868 4.1471e+01      37.15          1        102 0.0000e+00
   63.29534 -168.45100     1.7430   2.798561    31.7657      6.099      6.039     1.7415   2.798389    31.7651     8.3262     8.6487    376.684     8.8594 2.0231e+01      35.54          1        208 0.0000e+00
   63.29534 -168.45102     1.7430   2.798587    31.7655      6.978      6.911     1.7415   2.798418    31.7650     8.4795     8.6602    377.184     8.8408 1.4907e+01      34.61          1         35 0.0000e+00
   63.29534 -168.45102     1.7430   2.798625    31.7655      7.958      7.881     1.7415   2.798454    31.7649     8.3948     8.6630    377.305     8.8469 6.7833e+00      33.75          1        194 0.0000e+00
   63.29534 -168.45102     1.7425   2.798626    31.7655      8.925      8.839     1.7411   2.798458    31.7648     9.2446     8.6592    377.139     8.8565 3.8037e+00      32.92          1         81 0.0000e+00
   63.29532 -168.45105     1.7434   2.798735    31.7656      9.733      9.638     1.7419   2.798574    31.7651     8.9025     8.6591    377.135     8.8684 2.7085e+00      31.92          1       2334 0.0000e+00
   63.29528 -168.45118     1.7432   2.798735    31.7660      9.354      9.263     1.7417   2.798575    31.7655     8.8994     8.6725    377.721     8.8792 3.6070e+00      32.22          1        322 0.0000e+00
   63.29528 -168.45124     1.7430   2.798698    31.7663      8.117      8.038     1.7416   2.798541    31.7658     8.4806     8.6672    377.488     8.8601 7.1045e+00      33.42          1        157 0.0000e+00
   63.29528 -168.45124     1.7421   2.798608    31.7667      7.107      7.038     1.7406   2.798445    31.7662     9.0026     8.6770    377.918     8.8757 1.1733e+01      34.52          1        171 0.0000e+00
   63.29527 -168.45124     1.7423   2.798561    31.7665      5.929      5.872     1.7408   2.798408    31.7661     8.6031     8.6812    378.099     8.8852 2.3905e+01      35.59          1        132 0.0000e+00
   63.29527 -168.45124     1.7418   2.798496    31.7666      5.082      5.033     1.7403   2.798345    31.7663     8.5586     8.6819    378.131     8.8713 3.5382e+01      36.66          1         34 0.0000e+00
   63.29527 -168.45124     1.7416   2.798436    31.7667      4.114      4.074     1.7403   2.798299    31.7663     8.2366     8.6614    377.237     8.8785 7.4253e+01      36.97          1         98 0.0000e+00
   63.29526 -168.45124     1.7423   2.798485    31.7670      3.392      3.359     1.7408   2.798333    31.7666     7.2741     8.6672    377.489     8.8696 1.1919e+02      37.65          1         23 0.0000e+00