2018-01-30 21:58:44,875 DEBUG root about to write control file parameters to --yearbase 2018 --cruisename km1803 --configtype python --sonar wh300 --dbname a_km --datatype uhdas --cfgpath /home/data/km1803/proc/wh300/config --ens_len 120 #--update_gbin ## python gbins: run by "run_lastensq.py" at sea #offset between transducer and gps, applied in at-sea processing # NOTE : read special instructions to change offsets # diagnostics in cal/watertrk/guess_xducerxy.out # parameters used: --xducer_dx -2 --xducer_dy 1 ## see config/km1803_proc.py for other settings --skip_avg ## see above --max_search_depth 500 --ping_headcorr --proc_engine python --refuv_smoothwin 3 --incremental --find_pflags --top_plotbin 1 --auto 2018-01-30 21:58:44,877 DEBUG quick_adcp sys.argv = /usr/local/currents/bin/run_quick.py -d wh300 2018-01-30 21:58:44,880 DEBUG quick_setup found cruise_info.hcorr (posmv, pmv, 0) 2018-01-30 21:58:44,880 DEBUG quick_setup no heading correction will be used within the ensembles but values are staged in cal/rotate/hcorr.asc 2018-01-30 21:58:44,880 INFO quick_setup fix file is a_km.gps 2018-01-30 21:58:44,880 INFO quick_setup reflayer: ref_method = refsm 2018-01-30 21:58:44,881 INFO quick_setup reflayer: refuv_source = nav 2018-01-30 21:58:44,881 INFO quick_setup reflayer: refuv_smoothwin = 3 2018-01-30 21:58:44,883 INFO quick_adcp importing numpy version 1.11.0 2018-01-30 21:58:44,892 INFO quick_adcp importing matplotlib version 1.5.1 2018-01-30 21:58:45,086 DEBUG quick_mpl in Q_mpl 2018-01-30 21:58:45,086 INFO quick_adcp ===================================================== 2018-01-30 21:58:45,086 INFO quick_adcp ===================================================== 2018-01-30 21:58:45,086 INFO quick_adcp command line was: /usr/local/currents/bin/run_quick.py -d wh300 2018-01-30 21:58:45,086 INFO quick_adcp cwd is /home/data/km1803/proc/wh300 about to run these steps: - write_clearflags - scandata - avg_and_load - codaseditsetup - setflags - getnav - lst_hdg - plot_headcorr - navsteps - find_pflags - apply_edit - navsteps - lst_temp - plot_temp - lst_npings - calib - matfiles - adcpsect - refabs - smoothnav - putnav - refplots - find_pflags - codaseditsetup 2018-01-30 21:58:45,086 DEBUG quick_asect extracting matlab files for wh300 2018-01-30 21:58:45,091 DEBUG quick_setup data directory: /home/data/km1803/raw/wh300 2018-01-30 21:58:45,092 INFO quick_setup found 63 files using wildcard expansion relative to scan directory wildcard string was: "/home/data/km1803/raw/wh300/*.raw" 2018-01-30 21:58:45,094 INFO quick_setup presently in scan, writing filelist to /home/data/km1803/proc/wh300/ping/datafile_list.txt 2018-01-30 21:58:45,094 INFO quick_setup found 63 raw data files 2018-01-30 21:58:45,094 DEBUG quick_adcp starting with data files (as seen from scan/ or load/ directory): /home/data/km1803/raw/wh300/km2018_024_60929.raw ... 2018-01-30 21:58:45,095 DEBUG quick_adcp Tue Jan 30 21:58:45 2018 running quick_adcp.py as follows: --cntfile /home/data/km1803/proc/wh300/wh300_qpy.cnt ----- adcpsect variables ------ cbasename contour dbname a_km dbpath ../adcpdb deeper_boundaries [40, 60, 80, 100, 120] firstdepth 11 gridnum 80 increment 2 loaded_time_range all numbins 128 outdir . pgmin 50 prefix allbins_ proc_yearbase 2018 rl_endbin 20 rl_startbin 2 ss_string separate timegrid 60 vbasename vector ----- quick_adcp.py variables and current values ------ adjust_time 1 auto True badbeam None beamangle 20 bl_half_width 3 btrk_step 1.5 cfgpath /home/data/km1803/proc/wh300/config cntfile /home/data/km1803/proc/wh300/wh300_qpy.cnt commands None configtype python cruisename km1803 data_def vmadcp.def data_filelist /home/data/km1803/proc/wh300/ping/datafile_list.txt datadir /home/data/km1803/raw/wh300 datafile_glob *.raw datatype uhdas dbname a_km dday_bailout None debug False ens_len 120 expert None filelist ['/home/data/km1803/raw/wh300/km2018_024_60929.raw', '/home/data/km1803/raw/wh300/km2018_024_64800.raw', '/home/data/km1803/raw/wh300/km2018_024_72000.raw', '/home/data/km1803/raw/wh300/km2018_024_79200.raw', '/home/data/km1803/raw/wh300/km2018_025_00000.raw', '/home/data/km1803/raw/wh300/km2018_025_07200.raw', '/home/data/km1803/raw/wh300/km2018_025_14400.raw', '/home/data/km1803/raw/wh300/km2018_025_21600.raw', '/home/data/km1803/raw/wh300/km2018_025_28800.raw', '/home/data/km1803/raw/wh300/km2018_025_36000.raw', '/home/data/km1803/raw/wh300/km2018_025_43200.raw', '/home/data/km1803/raw/wh300/km2018_025_50400.raw', '/home/data/km1803/raw/wh300/km2018_025_57600.raw', '/home/data/km1803/raw/wh300/km2018_025_64800.raw', '/home/data/km1803/raw/wh300/km2018_025_72000.raw', '/home/data/km1803/raw/wh300/km2018_025_79200.raw', '/home/data/km1803/raw/wh300/km2018_026_00000.raw', '/home/data/km1803/raw/wh300/km2018_026_07200.raw', '/home/data/km1803/raw/wh300/km2018_026_14400.raw', '/home/data/km1803/raw/wh300/km2018_026_21600.raw', '/home/data/km1803/raw/wh300/km2018_026_28800.raw', '/home/data/km1803/raw/wh300/km2018_026_36000.raw', '/home/data/km1803/raw/wh300/km2018_026_43200.raw', '/home/data/km1803/raw/wh300/km2018_026_50400.raw', '/home/data/km1803/raw/wh300/km2018_026_57600.raw', '/home/data/km1803/raw/wh300/km2018_026_64800.raw', '/home/data/km1803/raw/wh300/km2018_026_72000.raw', '/home/data/km1803/raw/wh300/km2018_026_79200.raw', '/home/data/km1803/raw/wh300/km2018_027_00000.raw', '/home/data/km1803/raw/wh300/km2018_027_07200.raw', '/home/data/km1803/raw/wh300/km2018_027_14400.raw', '/home/data/km1803/raw/wh300/km2018_027_21600.raw', '/home/data/km1803/raw/wh300/km2018_027_28800.raw', '/home/data/km1803/raw/wh300/km2018_027_36000.raw', '/home/data/km1803/raw/wh300/km2018_027_43200.raw', '/home/data/km1803/raw/wh300/km2018_027_50400.raw', '/home/data/km1803/raw/wh300/km2018_027_57600.raw', '/home/data/km1803/raw/wh300/km2018_027_64800.raw', '/home/data/km1803/raw/wh300/km2018_027_72000.raw', '/home/data/km1803/raw/wh300/km2018_027_79200.raw', '/home/data/km1803/raw/wh300/km2018_028_00000.raw', '/home/data/km1803/raw/wh300/km2018_028_07200.raw', '/home/data/km1803/raw/wh300/km2018_028_14400.raw', '/home/data/km1803/raw/wh300/km2018_028_21600.raw', '/home/data/km1803/raw/wh300/km2018_028_28800.raw', '/home/data/km1803/raw/wh300/km2018_028_36000.raw', '/home/data/km1803/raw/wh300/km2018_028_43200.raw', '/home/data/km1803/raw/wh300/km2018_028_50400.raw', '/home/data/km1803/raw/wh300/km2018_028_57600.raw', '/home/data/km1803/raw/wh300/km2018_028_64800.raw', '/home/data/km1803/raw/wh300/km2018_028_72000.raw', '/home/data/km1803/raw/wh300/km2018_028_79200.raw', '/home/data/km1803/raw/wh300/km2018_029_00000.raw', '/home/data/km1803/raw/wh300/km2018_029_07200.raw', '/home/data/km1803/raw/wh300/km2018_029_14400.raw', '/home/data/km1803/raw/wh300/km2018_029_21600.raw', '/home/data/km1803/raw/wh300/km2018_029_28800.raw', '/home/data/km1803/raw/wh300/km2018_029_36000.raw', '/home/data/km1803/raw/wh300/km2018_029_43200.raw', '/home/data/km1803/raw/wh300/km2018_029_50400.raw', '/home/data/km1803/raw/wh300/km2018_029_57600.raw', '/home/data/km1803/raw/wh300/km2018_029_64800.raw', '/home/data/km1803/raw/wh300/km2018_029_72000.raw'] filter_hwidth 0.0208 find_pflags True firstdepth 11 fixfile a_km.gps fixfilexy a_km.agt frequency 300 hcorr_inst posmv help False incremental True instname wh300 jitter 15 max_BLKprofiles 300 max_search_depth 500 maxrunsecs None min_filter_fraction 0.5 mixed_pings False model wh nosave_editcfg 0 numbins 128 pgmin 50 ping_headcorr True pingpref None pingtype bb printformats png proc_engine python proc_yearbase 2018 procdir /home/data/km1803/proc/wh300 py_gbindirbase /home/data/km1803/gbin ref_method refsm refuv_inputfile a_km.agt refuv_smoothwin 3 refuv_source nav rl_endbin 20 rl_startbin 2 rotate_amplitude 1 rotate_angle 0 save_lastens 0 skip_avg True sonar wh300 steps2rerun sum_xducer_dx -2 sum_xducer_dy 1 time_angle_base ens_hcorr time_angle_file ens_hcorr.ang timeout_secs 86400 top_plotbin 1 tuv_file refsm_tuv.asc txy_file a_km.agt ub_type 1920 uhdas_config yearbase = 2018 uhdas_dir = /home/data/km1803 sonar = wh300 gbin = /home/data/km1803/gbin gbinsonar = /home/data/km1803/gbin/wh300 raw = /home/data/km1803/raw rawsonar = /home/data/km1803/raw/wh300 rbin = /home/data/km1803/rbin proc = /home/data/km1803/proc procsonar = /home/data/km1803/proc/wh300 other attributes: gbin_params = hdg_inst : gyro hdg_inst_msgs : [('gyro', 'hdg'), ('posmv', 'pmv')] hdg_msg : hdg pitch_inst : posmv pitch_msg : pmv pos_inst : posmv pos_msg : gps roll_inst : posmv roll_msg : pmv hcorr = ['posmv', 'pmv', 0.0] acc_heading_cutoff = 0.02 update_gbin False uvwref_end None uvwref_start None vardoc False varvals False wtrk_step 7 xducer_dx -2 xducer_dy 1 yearbase 2018 configured to run the following steps: write_clearflags scandata avg_and_load codaseditsetup setflags getnav lst_hdg plot_headcorr navsteps find_pflags apply_edit navsteps lst_temp plot_temp lst_npings calib matfiles adcpsect refabs smoothnav putnav refplots find_pflags codaseditsetup 2018-01-30 21:58:45,095 INFO quick_adcp --------------------------------------------- 2018-01-30 21:58:45,095 INFO quick_adcp step 1: set up files in "edit" directory 2018-01-30 21:58:45,095 INFO quick_run file exists (edit/clearflags.tmp). not writing 2018-01-30 21:58:45,095 INFO quick_adcp --------------------------------------------- 2018-01-30 21:58:45,095 INFO quick_adcp step 2: scan files for time range 2018-01-30 21:58:45,095 DEBUG quick_npy Starting: scanping 2018-01-30 21:58:45,136 DEBUG quick_npy Ending: scanping 2018-01-30 21:58:45,137 DEBUG quick_subs start_end_time 2018/01/25 16:55:30 to 2018/01/25 16:57:40 2018-01-30 21:58:45,137 DEBUG quick_subs dd0: 24.705208 dd1: 24.706713 2018-01-30 21:58:45,138 INFO quick_adcp looking for database with adcpdb/a_km*.blk 2018-01-30 21:58:45,139 INFO quick_adcp database found: listing blocks 2018-01-30 21:58:45,140 DEBUG quick_subs removing a_kmdir.blk 2018-01-30 21:58:45,141 DEBUG quick_subs about to run mkblkdir 2018-01-30 21:58:45,141 DEBUG quick_subs database still exists; rerunning mkdirblk 2018-01-30 21:58:45,143 DEBUG quick_subs running mkblkdir mkblkdir.tmp 2018-01-30 21:58:45,151 DEBUG quick_subs database passes. 2018-01-30 21:58:45,152 DEBUG quick_subs start_end_time 2018/01/25 16:57:30 to 2018/01/30 21:55:30 2018-01-30 21:58:45,152 DEBUG quick_subs dd0: 24.706597 dd1: 29.913542 2018-01-30 21:58:45,153 DEBUG quick_adcp in quick_adcp.py before load, just looked for database times 2018-01-30 21:58:45,153 DEBUG quick_adcp origdb_time_range is 2018/01/25 16:57:30 to 2018/01/30 21:55:30 2018-01-30 21:58:45,153 DEBUG quick_adcp (24.706597 to 29.913542) 2018-01-30 21:58:45,153 INFO quick_adcp --------------------------------------------- 2018-01-30 21:58:45,153 INFO quick_adcp step 3: generate averaged data... 2018-01-30 21:58:45,153 INFO quick_run file load/ping_editparams.txt exists. not replacing 2018-01-30 21:58:45,153 DEBUG quick_setup starting in /home/data/km1803/proc/wh300 2018-01-30 21:58:45,153 DEBUG quick_setup executing commands from /home/data/km1803/proc/wh300/load 2018-01-30 21:58:45,153 DEBUG quick_setup running python command "run_pingavg_npy" 2018-01-30 21:58:45,153 DEBUG quick_npy Starting: pingavg 2018-01-30 21:58:45,155 DEBUG quick_npy xducerxy is [-2, 1] 2018-01-30 21:58:45,155 DEBUG quick_npy uvwref is None 2018-01-30 21:58:45,156 DEBUG quick_npy singleping editing parameters: 2018-01-30 21:58:45,156 DEBUG quick_npy bigtarget_mab_window : 11 2018-01-30 21:58:45,156 DEBUG quick_npy rl_endbin : 20 2018-01-30 21:58:45,156 DEBUG quick_npy max_search_depth : 500 2018-01-30 21:58:45,156 DEBUG quick_npy cor_cutoff : 70 2018-01-30 21:58:45,156 DEBUG quick_npy ampfilt : 40 2018-01-30 21:58:45,156 DEBUG quick_npy bigtarget_lgb_margin : 0.500000 2018-01-30 21:58:45,156 DEBUG quick_npy rl_startbin : 2 2018-01-30 21:58:45,156 DEBUG quick_npy ecutoff : 0.500000 2018-01-30 21:58:45,156 DEBUG quick_npy refavg_valcutoff : 1 2018-01-30 21:58:45,156 DEBUG quick_npy weakprof_percent : 50 2018-01-30 21:58:45,156 DEBUG quick_npy bigtarget_ampthresh : 55 2018-01-30 21:58:45,168 INFO pingavg ---------------- 2018-01-30 21:58:45,168 INFO pingavg sonar is wh300 2018-01-30 21:58:45,168 INFO pingavg Pingavg.run for time range 29.833335 to 29.915130 2018-01-30 21:58:45,168 INFO pingavg transducer offset: xducer_dx = -2.000, xducer_dy = 1.000 2018-01-30 21:58:45,168 INFO pingavg shifted positions applied to *.gpst2 and *.uvship' 2018-01-30 21:58:45,168 INFO pingavg ---------------- 2018-01-30 21:58:45,177 DEBUG pingavg Chunk 1 of 1, 29.833335 to 29.915130 2018-01-30 21:58:45,177 DEBUG pingavg Nothing written 2018-01-30 21:58:45,177 DEBUG quick_npy wrote 0 averages 2018-01-30 21:58:45,178 DEBUG quick_npy Ending: pingavg 2018-01-30 21:58:45,178 INFO quick_adcp --------------------------------------------- 2018-01-30 21:58:45,178 INFO quick_adcp step 4: load averaged data (to database) 2018-01-30 21:58:45,178 DEBUG quick_subs in del_overlapping 2018-01-30 21:58:45,178 DEBUG quick_subs lastblock: 2018-01-30 21:58:45,178 DEBUG quick_subs 13 2018-01-30 21:58:45,179 DEBUG quick_subs lastcmd: 2018-01-30 21:58:45,179 DEBUG quick_subs 13 2018-01-30 21:58:45,179 DEBUG quick_subs delblks: 2018-01-30 21:58:45,179 DEBUG quick_subs [13] 2018-01-30 21:58:45,179 DEBUG quick_subs loadblks: 2018-01-30 21:58:45,179 DEBUG quick_subs [13] 2018-01-30 21:58:45,180 DEBUG quick_subs about to run mkblkdir 2018-01-30 21:58:45,180 DEBUG quick_subs database still exists; rerunning mkdirblk 2018-01-30 21:58:45,180 DEBUG quick_subs running mkblkdir mkblkdir.tmp 2018-01-30 21:58:45,187 DEBUG quick_subs database passes. 2018-01-30 21:58:45,187 DEBUG quick_subs start_end_time 2018/01/25 16:57:30 to 2018/01/30 16:55:29 2018-01-30 21:58:45,187 DEBUG quick_subs dd0: 24.706597 dd1: 29.705197 2018-01-30 21:58:45,187 DEBUG quick_run [13] 2018-01-30 21:58:45,187 DEBUG quick_run cmdlist 2018-01-30 21:58:45,187 DEBUG quick_run ['./ens_blk013.cmd'] 2018-01-30 21:58:45,188 INFO quick_run loaded time range: 2018/01/30 16:57:29 to 2018/01/30 21:57:30 2018-01-30 21:58:45,188 DEBUG quick_setup load/ldcodas.tmp exists 2018-01-30 21:58:45,188 DEBUG quick_setup starting in /home/data/km1803/proc/wh300 2018-01-30 21:58:45,188 DEBUG quick_setup executing commands from /home/data/km1803/proc/wh300/load 2018-01-30 21:58:45,189 DEBUG quick_setup running python command "ldcodas" 2018-01-30 21:58:45,189 DEBUG quick_subs filling "thisload" timerange 2018-01-30 21:58:45,189 DEBUG quick_subs in ldcodas 2018-01-30 21:58:45,189 DEBUG quick_subs cmdlist: 2018-01-30 21:58:45,189 DEBUG quick_subs ['./ens_blk013.cmd'] 2018-01-30 21:58:45,189 DEBUG quick_subs DATABASE_NAME: ../adcpdb/a_km DEFINITION_FILE: vmadcp.def LOG_FILE: load.log YEAR_BASE: 2018 cmd_file_list /* use only if specifying cmd paths, not "@" */ END ./ens_blk013.cmd 2018-01-30 21:58:45,190 DEBUG quick_setup about to run ldcodas ldcodas.tmp 2018-01-30 21:58:45,238 INFO quick_run 14 block files present 2018-01-30 21:58:45,238 DEBUG quick_subs removing a_kmdir.blk 2018-01-30 21:58:45,239 DEBUG quick_subs about to run mkblkdir 2018-01-30 21:58:45,239 DEBUG quick_subs database still exists; rerunning mkdirblk 2018-01-30 21:58:45,239 DEBUG quick_subs running mkblkdir mkblkdir.tmp 2018-01-30 21:58:45,245 DEBUG quick_subs database passes. 2018-01-30 21:58:45,245 DEBUG quick_subs start_end_time 2018/01/25 16:57:30 to 2018/01/30 21:57:30 2018-01-30 21:58:45,245 DEBUG quick_subs dd0: 24.706597 dd1: 29.914931 2018-01-30 21:58:45,245 INFO quick_adcp database time range: 2018-01-30 21:58:45,245 INFO quick_adcp 2018/01/25 16:57:30 to 2018/01/30 21:57:30 2018-01-30 21:58:45,245 INFO quick_adcp (24.706597 to 29.914931) 2018-01-30 21:58:45,246 DEBUG quick_setup starting in /home/data/km1803/proc/wh300 2018-01-30 21:58:45,246 DEBUG quick_setup executing commands from /home/data/km1803/proc/wh300/adcpdb 2018-01-30 21:58:45,246 DEBUG quick_setup running python command "lst_conf" 2018-01-30 21:58:45,246 DEBUG quick_subs dbname: a_km output: a_km.cnh time_ranges: all 2018-01-30 21:58:45,291 DEBUG quick_setup about to run lst_conf lst_conf.tmp 2018-01-30 21:58:45,302 INFO quick_adcp --------------------------------------------- 2018-01-30 21:58:45,302 INFO quick_adcp step 5: set up files for codas editing (gautoedit.py) 2018-01-30 21:58:45,302 DEBUG quick_run file edit/codas_editparams.txt exists. not replacing 2018-01-30 21:58:45,303 INFO quick_adcp --------------------------------------------- 2018-01-30 21:58:45,303 INFO quick_adcp step 6: run setflags? 2018-01-30 21:58:45,303 DEBUG quick_setup starting in /home/data/km1803/proc/wh300 2018-01-30 21:58:45,303 DEBUG quick_setup executing commands from /home/data/km1803/proc/wh300/edit 2018-01-30 21:58:45,303 DEBUG quick_setup running python command "write_setflags" 2018-01-30 21:58:45,303 DEBUG quick_subs dbname: ../adcpdb/a_km pg_min: 50 set_range_bit time_ranges: all 2018-01-30 21:58:45,305 DEBUG quick_setup about to run setflags setflags.tmp 2018-01-30 21:58:45,345 INFO quick_adcp --------------------------------------------- 2018-01-30 21:58:45,346 INFO quick_adcp step 7: get navigation 2018-01-30 21:58:45,346 DEBUG quick_setup starting in /home/data/km1803/proc/wh300 2018-01-30 21:58:45,346 DEBUG quick_setup executing commands from /home/data/km1803/proc/wh300/nav 2018-01-30 21:58:45,346 DEBUG quick_setup running python command "catnav" 2018-01-30 21:58:45,348 INFO quick_subs navigation file nav/a_km.gps created from load/*.gps2 2018-01-30 21:58:45,351 INFO quick_subs navigation file nav/a_km.agt created from load/*.gpst2 2018-01-30 21:58:45,354 DEBUG quick_mpl Starting plot: uvship 2018-01-30 21:58:45,639 DEBUG quick_mpl Ending plot: uvship 2018-01-30 21:58:45,639 INFO quick_run plotted uvship 2018-01-30 21:58:45,639 INFO quick_adcp --------------------------------------------- 2018-01-30 21:58:45,639 INFO quick_adcp step 8: list heading 2018-01-30 21:58:45,639 DEBUG quick_setup cal/rotate/lst_hdg.tmp exists 2018-01-30 21:58:45,639 DEBUG quick_setup starting in /home/data/km1803/proc/wh300 2018-01-30 21:58:45,639 DEBUG quick_setup executing commands from /home/data/km1803/proc/wh300/cal/rotate 2018-01-30 21:58:45,639 DEBUG quick_setup running python command "lst_hdg" 2018-01-30 21:58:45,639 DEBUG quick_subs dbname: ../../adcpdb/a_km output: scn.hdg step_size= 1 year_base= 2018 time_ranges: all 2018-01-30 21:58:45,641 DEBUG quick_setup about to run lst_hdg lst_hdg.tmp 2018-01-30 21:58:45,656 INFO quick_run ... headings extracted 2018-01-30 21:58:45,656 INFO quick_adcp --------------------------------------------- 2018-01-30 21:58:45,656 INFO quick_adcp step 9: plot heading correction 2018-01-30 21:58:45,656 DEBUG quick_run hcorr_inst is posmv 2018-01-30 21:58:45,656 DEBUG quick_mpl Starting plot: hcorr 2018-01-30 21:58:45,683 DEBUG quick_mpl found 5.208334 days of data 2018-01-30 21:58:45,683 DEBUG quick_mpl figures with 4 panels per page, 1.000000 days per panel 2018-01-30 21:58:45,683 DEBUG quick_mpl printing 2 pages 2018-01-30 21:58:46,196 DEBUG quick_mpl Ending plot: hcorr 2018-01-30 21:58:46,196 INFO quick_run plots are in cal/rotate/*png 2018-01-30 21:58:46,196 INFO quick_adcp ------------------------- 2018-01-30 21:58:46,196 INFO quick_adcp ---- running navsteps --- 2018-01-30 21:58:46,196 INFO quick_adcp ------------------------- 2018-01-30 21:58:46,196 INFO quick_adcp step 10: nav steps: run adcpsect 2018-01-30 21:58:46,196 INFO quick_adcp navstep 1 2018-01-30 21:58:46,196 DEBUG quick_setup nav/as_nav.tmp exists 2018-01-30 21:58:46,197 DEBUG quick_setup starting in /home/data/km1803/proc/wh300 2018-01-30 21:58:46,197 DEBUG quick_setup executing commands from /home/data/km1803/proc/wh300/nav 2018-01-30 21:58:46,197 DEBUG quick_setup running python command "as_nav" 2018-01-30 21:58:46,197 DEBUG quick_subs dbname: ../adcpdb/a_km output: a_km step_size: 1 ndepth: 20 time_ranges: separate year_base= 2018 option_list: pg_min= 50 navigation: reference_bins 2 to 20 end statistics: mean units= 0.01 /* cm/s instead of default m/s */ end flag_mask: ALL_BITS end end 2018/01/25 16:57:30 to 2018/01/30 21:57:30 /* the whole time range */ 2018-01-30 21:58:46,199 DEBUG quick_setup about to run adcpsect as_nav.tmp 2018-01-30 21:58:46,227 INFO quick_run ... ran adcpsect for navsteps 2018-01-30 21:58:46,227 INFO quick_adcp ------------------------- 2018-01-30 21:58:46,227 INFO quick_adcp step 11: nav steps: run refabs 2018-01-30 21:58:46,227 INFO quick_adcp navstep 2 2018-01-30 21:58:46,228 DEBUG quick_setup starting in /home/data/km1803/proc/wh300 2018-01-30 21:58:46,228 DEBUG quick_setup executing commands from /home/data/km1803/proc/wh300/nav 2018-01-30 21:58:46,228 DEBUG quick_setup running python command "refabs" 2018-01-30 21:58:46,228 DEBUG quick_subs fix_file_type: simple reference_file: a_km.nav fix_file: a_km.gps output: a_km.ref year_base= 2018 ensemble_length= 120 gap_tolerance= 10 2018-01-30 21:58:46,229 DEBUG quick_setup about to run refabs refabs.tmp 2018-01-30 21:58:46,250 INFO quick_run ... ran refabs for navsteps 2018-01-30 21:58:46,250 INFO quick_adcp ------------------------- 2018-01-30 21:58:46,250 INFO quick_adcp step 12: nav steps: run smoothr for plots 2018-01-30 21:58:46,250 INFO quick_adcp navstep 3 2018-01-30 21:58:46,250 DEBUG quick_setup nav/smoothr.tmp exists 2018-01-30 21:58:46,250 DEBUG quick_setup starting in /home/data/km1803/proc/wh300 2018-01-30 21:58:46,250 DEBUG quick_setup executing commands from /home/data/km1803/proc/wh300/nav 2018-01-30 21:58:46,250 DEBUG quick_setup running python command "smoothr" 2018-01-30 21:58:46,250 DEBUG quick_subs reference_file: a_km.nav refabs_output: a_km.ref output: a_km.sm filter_hwidth= 0.0208 min_filter_fraction= 0.5 max_gap_ratio= 0.05 max_gap_distance= 50 max_gap_time= 30 /* 0.5 minutes */ ensemble_time= 120 max_speed= 5.0 min_speed= 1.0 iterations= 5 fix_to_dr_limit= 0.00050 2018-01-30 21:58:46,252 DEBUG quick_setup about to run smoothr smoothr.tmp 2018-01-30 21:58:46,357 INFO quick_run ... ran smoothr 2018-01-30 21:58:46,357 INFO quick_adcp ------------------------- 2018-01-30 21:58:46,357 INFO quick_adcp step 13: nav steps: smooth navigation for velocities 2018-01-30 21:58:46,357 INFO quick_adcp navstep 4 2018-01-30 21:58:46,357 INFO quick_run smoothing method for ship speed: refsm 2018-01-30 21:58:46,358 INFO quick_run smoothing window: 3 2018-01-30 21:58:46,358 INFO quick_run ship speed source: nav 2018-01-30 21:58:46,358 DEBUG quick_npy Starting: refsm 2018-01-30 21:58:46,479 DEBUG quick_npy Ending: refsm 2018-01-30 21:58:46,479 INFO quick_run ... shipspeed smoothing step done 2018-01-30 21:58:46,479 INFO quick_adcp ------------------------- 2018-01-30 21:58:46,480 INFO quick_adcp step 14: nav steps: put positions and uvship from refsm into codasdb 2018-01-30 21:58:46,480 INFO quick_adcp navstep 5 2018-01-30 21:58:46,480 DEBUG quick_setup nav/put_txy.tmp exists 2018-01-30 21:58:46,480 DEBUG quick_setup starting in /home/data/km1803/proc/wh300 2018-01-30 21:58:46,480 DEBUG quick_setup executing commands from /home/data/km1803/proc/wh300/nav 2018-01-30 21:58:46,480 DEBUG quick_setup running python command "put_txy" 2018-01-30 21:58:46,480 DEBUG quick_subs dbname: ../adcpdb/a_km position_file: a_km.agt year_base= 2018 tolerance= 5 2018-01-30 21:58:46,481 DEBUG quick_setup about to run put_txy put_txy.tmp 2018-01-30 21:58:46,497 INFO quick_run ... ran put_txy 2018-01-30 21:58:46,497 DEBUG quick_setup nav/put_tuv.tmp exists 2018-01-30 21:58:46,497 DEBUG quick_setup starting in /home/data/km1803/proc/wh300 2018-01-30 21:58:46,497 DEBUG quick_setup executing commands from /home/data/km1803/proc/wh300/nav 2018-01-30 21:58:46,497 DEBUG quick_setup running python command "put_tuv" 2018-01-30 21:58:46,497 DEBUG quick_subs dbname: ../adcpdb/a_km shipspeed_file: refsm_tuv.asc year_base= 2018 tolerance= 5 2018-01-30 21:58:46,499 DEBUG quick_setup about to run put_tuv put_tuv.tmp 2018-01-30 21:58:46,514 INFO quick_run ... ran put_tuv 2018-01-30 21:58:46,514 DEBUG quick_mpl Starting plot: nav 2018-01-30 21:58:46,747 DEBUG quick_mpl Ending plot: nav 2018-01-30 21:58:46,747 INFO quick_run ... made navigation plot 2018-01-30 21:58:46,747 INFO quick_adcp ------------------------- 2018-01-30 21:58:46,747 INFO quick_adcp step 15: nav steps: make reflayer plots 2018-01-30 21:58:46,747 INFO quick_adcp navstep 6 2018-01-30 21:58:46,747 DEBUG quick_mpl Starting plot: refl 2018-01-30 21:58:46,814 DEBUG quick_mpl found 5.205556 days of data 2018-01-30 21:58:46,814 DEBUG quick_mpl start day is 24.000000 2018-01-30 21:58:46,814 DEBUG quick_mpl figures with 2.000000 days per page 2018-01-30 21:58:46,815 DEBUG quick_mpl printing 3 pages 2018-01-30 21:58:46,815 DEBUG quick_mpl yrange will be [1.000000, 1.000000] 2018-01-30 21:58:47,267 DEBUG quick_mpl Ending plot: refl 2018-01-30 21:58:47,267 INFO quick_run ... made reflayer plots 2018-01-30 21:58:47,267 INFO quick_adcp --------------------------------------------- 2018-01-30 21:58:47,267 INFO quick_adcp step 10: find profile flags 2018-01-30 21:58:47,268 DEBUG quick_setup starting in /home/data/km1803/proc/wh300 2018-01-30 21:58:47,268 DEBUG quick_setup executing commands from /home/data/km1803/proc/wh300/edit 2018-01-30 21:58:47,268 DEBUG quick_setup running python command "run_autoedit_npy" 2018-01-30 21:58:47,268 DEBUG quick_npy Starting: autoedit 2018-01-30 21:58:47,359 DEBUG pingedit wrote 2 bad bins to abadbin_tmp.asc 2018-01-30 21:58:47,365 DEBUG pingedit wrote 1 bad profiles to abadprf_tmp.asc 2018-01-30 21:58:47,365 DEBUG quick_npy Ending: autoedit 2018-01-30 21:58:47,365 INFO quick_run ... extracted files using automatic editing 2018-01-30 21:58:47,365 INFO quick_adcp --------------------------------------------- 2018-01-30 21:58:47,365 INFO quick_adcp step 11: apply editing 2018-01-30 21:58:47,365 DEBUG quick_run starting in: /home/data/km1803/proc/wh300 2018-01-30 21:58:47,365 DEBUG quick_run executing commands from: edit 2018-01-30 21:58:47,366 DEBUG quick_run about to run dbupdate ../adcpdb/a_km abadprf_tmp.asc 2018-01-30 21:58:47,372 DEBUG quick_run about to run badbin ../adcpdb/a_km abadbin_tmp.asc 2018-01-30 21:58:47,380 DEBUG quick_subs dbname: ../adcpdb/a_km pg_min: 50 set_range_bit time_ranges: all 2018-01-30 21:58:47,380 DEBUG quick_run about to run setflags setflags.tmp 2018-01-30 21:58:47,422 DEBUG quick_run changing directories back to /home/data/km1803/proc/wh300 2018-01-30 21:58:47,423 INFO quick_adcp --------------------------------------------- 2018-01-30 21:58:47,423 INFO quick_adcp step 12: run calibration steps 2018-01-30 21:58:47,423 DEBUG quick_setup cal/botmtrk/lst_btrk.tmp exists 2018-01-30 21:58:47,423 DEBUG quick_setup starting in /home/data/km1803/proc/wh300 2018-01-30 21:58:47,423 DEBUG quick_setup executing commands from /home/data/km1803/proc/wh300/cal/botmtrk 2018-01-30 21:58:47,423 DEBUG quick_setup running python command "lst_btrk" 2018-01-30 21:58:47,423 DEBUG quick_subs dbname: ../../adcpdb/a_km output: a_km.btm step_size= 1 year_base= 2018 time_ranges: 2018/01/25 16:57:30 to 2018/01/30 21:57:30 /* whole time range */ 2018-01-30 21:58:47,487 DEBUG quick_setup about to run lst_btrk lst_btrk.tmp 2018-01-30 21:58:47,498 DEBUG quick_setup cal/botmtrk/refabsbt.tmp exists 2018-01-30 21:58:47,499 DEBUG quick_setup starting in /home/data/km1803/proc/wh300 2018-01-30 21:58:47,499 DEBUG quick_setup executing commands from /home/data/km1803/proc/wh300/cal/botmtrk 2018-01-30 21:58:47,499 DEBUG quick_setup running python command "refabsbt" 2018-01-30 21:58:47,499 DEBUG quick_subs fix_file_type: simple reference_file: a_km.btm fix_file: ../../nav/a_km.gps output: a_km.ref year_base= 2018 ensemble_length= 120 gap_tolerance= 60 2018-01-30 21:58:47,500 DEBUG quick_setup about to run refabsbt refabsbt.tmp 2018-01-30 21:58:47,507 INFO quick_run ...bottom track info in check cal/botmtrk 2018-01-30 21:58:47,508 DEBUG quick_mpl Starting plot: btcal 2018-01-30 21:58:47,510 DEBUG quick_mpl No data in a_km.btm 2018-01-30 21:58:47,510 DEBUG quick_mpl Returning from Btplot with no output 2018-01-30 21:58:47,510 DEBUG quick_mpl Ending plot: btcal 2018-01-30 21:58:47,510 DEBUG quick_setup nav/as_nav.tmp exists 2018-01-30 21:58:47,510 DEBUG quick_setup starting in /home/data/km1803/proc/wh300 2018-01-30 21:58:47,510 DEBUG quick_setup executing commands from /home/data/km1803/proc/wh300/nav 2018-01-30 21:58:47,510 DEBUG quick_setup running python command "as_nav" 2018-01-30 21:58:47,510 DEBUG quick_subs dbname: ../adcpdb/a_km output: a_km step_size: 1 ndepth: 20 time_ranges: separate year_base= 2018 option_list: pg_min= 50 navigation: reference_bins 2 to 20 end statistics: mean units= 0.01 /* cm/s instead of default m/s */ end flag_mask: ALL_BITS end end 2018/01/25 16:57:30 to 2018/01/30 21:57:30 /* the whole time range */ 2018-01-30 21:58:47,511 DEBUG quick_setup about to run adcpsect as_nav.tmp 2018-01-30 21:58:47,534 DEBUG quick_setup cal/watertrk/timslip.tmp exists 2018-01-30 21:58:47,535 DEBUG quick_setup starting in /home/data/km1803/proc/wh300 2018-01-30 21:58:47,535 DEBUG quick_setup executing commands from /home/data/km1803/proc/wh300/cal/watertrk 2018-01-30 21:58:47,535 DEBUG quick_setup running python command "timslip" 2018-01-30 21:58:47,535 DEBUG quick_subs fix_file_type: simple fix_file: ../../nav/a_km.gps reference_file: ../../nav/a_km.nav output_file: a_km_7.cal year_base= 2018 min_n_fixes= 7 /* 5 7 9 */ n_refs= 7 /* 5 7 9 */ i_ref_l0= 1 i_ref_l1= 2 /* 1 2 3 */ i_ref_r0= 5 /* 4 5 6 */ i_ref_r1= 6 /* 4 6 8 */ up_thresh= 3.0 /* m/s */ down_thresh= 3.0 /* m/s */ turn_speed= 2.0 /* m/s */ turn_thresh= 60 /* degrees */ dtmax= 360 /* seconds, for 300-second ensembles */ tolerance= 5.e-5 /* days, about 5 seconds */ grid: ensemble use_shifted_times? no 2018-01-30 21:58:47,537 DEBUG quick_setup about to run timslip timslip.tmp 2018-01-30 21:58:47,551 INFO quick_run ... watertrack info in cal/watertrk 2018-01-30 21:58:47,551 DEBUG quick_mpl Starting plot: wtcal 2018-01-30 21:58:47,554 DEBUG quick_mpl Found 10 calibration points 2018-01-30 21:58:48,178 DEBUG quick_mpl Ending plot: wtcal 2018-01-30 21:58:48,178 DEBUG quick_setup starting in /home/data/km1803/proc/wh300 2018-01-30 21:58:48,178 DEBUG quick_setup executing commands from /home/data/km1803/proc/wh300/cal/watertrk 2018-01-30 21:58:48,178 DEBUG quick_setup running python command "run_guess_xducerxy_npy" 2018-01-30 21:58:48,178 DEBUG quick_npy Starting: guess_xducerxy 2018-01-30 21:58:48,259 DEBUG quick_npy Ending: guess_xducerxy 2018-01-30 21:58:48,259 INFO quick_run ... check cal/watertrk for estimate 2018-01-30 21:58:48,259 INFO quick_adcp --------------------------------------------- 2018-01-30 21:58:48,259 INFO quick_adcp step 13: extract and plot temperature 2018-01-30 21:58:48,259 DEBUG quick_setup starting in /home/data/km1803/proc/wh300 2018-01-30 21:58:48,259 DEBUG quick_setup executing commands from /home/data/km1803/proc/wh300/edit 2018-01-30 21:58:48,259 DEBUG quick_setup running python command "lst_temp" 2018-01-30 21:58:48,259 DEBUG quick_subs dbname: ../adcpdb/a_km output: a_km.tem step_size= 1 year_base= 2018 time_ranges: all 2018-01-30 21:58:48,261 DEBUG quick_setup about to run lst_temp lst_temp.tmp 2018-01-30 21:58:48,280 DEBUG quick_mpl Starting plot: temp 2018-01-30 21:58:48,305 DEBUG quick_mpl plotting 3751 points 2018-01-30 21:58:48,462 DEBUG quick_mpl Ending plot: temp 2018-01-30 21:58:48,462 INFO quick_run plotted temperature 2018-01-30 21:58:48,462 INFO quick_adcp --------------------------------------------- 2018-01-30 21:58:48,462 INFO quick_adcp step 14: extract and plot number of pings per ensemble 2018-01-30 21:58:48,462 DEBUG quick_setup edit/lst_npings.tmp exists 2018-01-30 21:58:48,462 DEBUG quick_setup starting in /home/data/km1803/proc/wh300 2018-01-30 21:58:48,462 DEBUG quick_setup executing commands from /home/data/km1803/proc/wh300/edit 2018-01-30 21:58:48,462 DEBUG quick_setup running python command "lst_npings" 2018-01-30 21:58:48,462 DEBUG quick_subs dbname: ../adcpdb/a_km output: a_km_npings.txt step_size= 1 year_base= 2018 time_ranges: all 2018-01-30 21:58:48,464 DEBUG quick_setup about to run lst_npings lst_npings.tmp 2018-01-30 21:58:48,480 DEBUG quick_mpl Starting plot: npings 2018-01-30 21:58:48,509 DEBUG quick_mpl plotting 3751 points 2018-01-30 21:58:48,609 DEBUG quick_mpl Ending plot: npings 2018-01-30 21:58:48,609 INFO quick_run ... plotted number of pings per ensemble 2018-01-30 21:58:48,609 INFO quick_adcp --------------------------------------------- 2018-01-30 21:58:48,609 INFO quick_adcp step 15: extract matlab "allbins" 2018-01-30 21:58:48,609 DEBUG quick_asect step 18: make matlab files for plotting 2018-01-30 21:58:48,609 DEBUG quick_setup starting in /home/data/km1803/proc/wh300 2018-01-30 21:58:48,610 DEBUG quick_setup executing commands from /home/data/km1803/proc/wh300/vector 2018-01-30 21:58:48,610 DEBUG quick_setup running python command "timegrid" 2018-01-30 21:58:48,621 DEBUG quick_setup about to run timegrid a_km.tmp 2018-01-30 21:58:48,628 DEBUG quick_setup starting in /home/data/km1803/proc/wh300 2018-01-30 21:58:48,628 DEBUG quick_setup executing commands from /home/data/km1803/proc/wh300/vector 2018-01-30 21:58:48,628 DEBUG quick_setup running python command "as_vect" 2018-01-30 21:58:48,630 DEBUG quick_setup about to run adcpsect as_vect.tmp 2018-01-30 21:58:48,665 DEBUG quick_asect done making vector matfiles 2018-01-30 21:58:48,666 DEBUG quick_setup starting in /home/data/km1803/proc/wh300 2018-01-30 21:58:48,666 DEBUG quick_setup executing commands from /home/data/km1803/proc/wh300/contour 2018-01-30 21:58:48,666 DEBUG quick_setup running python command "timegrid" 2018-01-30 21:58:48,668 DEBUG quick_setup about to run timegrid a_km.tmp 2018-01-30 21:58:48,676 DEBUG quick_setup starting in /home/data/km1803/proc/wh300 2018-01-30 21:58:48,676 DEBUG quick_setup executing commands from /home/data/km1803/proc/wh300/contour 2018-01-30 21:58:48,676 DEBUG quick_setup running python command "as_cont" 2018-01-30 21:58:48,677 DEBUG quick_setup about to run adcpsect as_cont.tmp 2018-01-30 21:58:48,736 DEBUG quick_setup starting in /home/data/km1803/proc/wh300 2018-01-30 21:58:48,736 DEBUG quick_setup executing commands from /home/data/km1803/proc/wh300/contour 2018-01-30 21:58:48,736 DEBUG quick_setup about to run getmat -qrs -f allbins_ ../adcpdb/a_km 2018-01-30 21:58:48,870 DEBUG quick_asect done running getmat with "allbins" 2018-01-30 21:58:48,870 INFO quick_adcp --------------------------------------------- 2018-01-30 21:58:48,870 INFO quick_adcp writing "cruise_info.txt" 2018-01-30 21:58:48,873 INFO root copying NOFIG to /home/adcp/www/figures/wh300_hcorr_plot.png 2018-01-30 21:58:48,873 INFO root copying NOFIG to /home/adcp/www/figures/thumbnails/wh300_hcorr_plot_thumb.png 2018-01-30 21:58:48,873 DEBUG root matfile is contour/contour_uv.mat 2018-01-30 21:58:48,874 INFO root copying contour/contour_uv.mat to /home/adcp/www/data/wh300_cont_uv.mat 2018-01-30 21:58:48,874 DEBUG root matfile is vector/vector_uv.mat 2018-01-30 21:58:48,874 INFO root copying vector/vector_uv.mat to /home/adcp/www/data/wh300_vect_uv.mat 2018-01-30 21:58:48,874 DEBUG root matfile is contour/contour_xy.mat 2018-01-30 21:58:48,874 INFO root copying contour/contour_xy.mat to /home/adcp/www/data/wh300_cont_xy.mat 2018-01-30 21:58:48,874 DEBUG root matfile is vector/vector_xy.mat 2018-01-30 21:58:48,875 INFO root copying vector/vector_xy.mat to /home/adcp/www/data/wh300_vect_xy.mat 2018-01-30 21:58:48,875 DEBUG root about to copy file edit/a_km.tem to /home/adcp/www/data/wh300_temp.asc 2018-01-30 21:58:48,875 INFO root copying edit/a_km.tem to /home/adcp/www/data/wh300_temp.asc 2018-01-30 21:58:49,152 DEBUG root about to copy netcdf file /home/data/km1803/proc/wh300/contour/wh300.nc to /home/adcp/www/data/wh300.nc 2018-01-30 21:58:49,156 INFO root copying /home/data/km1803/proc/wh300/contour/wh300.nc to /home/adcp/www/data/wh300.nc 2018-01-30 21:58:49,157 INFO root nc_compressed: ddstep is 1 2018-01-30 21:58:49,229 INFO root success: made compressed nc file /home/adcp/uhdas_tmp/wh300_compr.nc 2018-01-30 21:58:49,250 INFO root generating pingstats for wh300 2018-01-30 21:58:49,250 INFO root Ending quick_adcp.py