2018/01/11 20:47:11 - currents01km 4.8.0-36-generic #36~16.04.1-Ubuntu SMP Sun Feb 5 09:39:57 UTC 2017 x86_64
2018/01/11 20:47:11 - /dev/ttyUSB7
2018/01/11 20:47:11 - /dev/ttyUSB3
2018/01/11 20:47:11 - In CruiseSetup.init
2018/01/11 20:47:11 - Resuming Cruise
2018/01/11 20:47:12 - Entering buildLoggers
2018/01/11 20:47:12 - device:
2018/01/11 20:47:12 - ttyUSB5
2018/01/11 20:47:12 - -f km -F -m 1 -H 2  -e raw -lE -c -O -I -Z tcp://127.0.0.1:38010
2018/01/11 20:47:12 - device:
2018/01/11 20:47:12 - ttyUSB5
2018/01/11 20:47:12 - -f km -F -m 1 -H 2  -e raw -lE -c -O -I
2018/01/11 20:47:12 - device:
2018/01/11 20:47:12 - ttyUSB5
2018/01/11 20:47:12 - -f km -F -m 1 -H 2  -e gps -Y2 -c
2018/01/11 20:47:12 - device:
2018/01/11 20:47:12 - ttyUSB5
2018/01/11 20:47:12 - -f km -F -m 1 -H 2  -e pmv -Y2 -c
2018/01/11 20:47:12 - device:
2018/01/11 20:47:12 - ttyUSB5
2018/01/11 20:47:12 - -f km -F -m 1 -H 2  -e hdg -Y2 -c -s5
2018/01/11 20:47:12 - >>>> C_ss enabled <<<<<
2018/01/11 20:47:12 - Leaving buildLoggers
2018/01/11 20:47:12 - About to run mainloop
2018/01/11 20:47:15 - enter StartLogging, resume =
2018/01/11 20:47:15 - 0
2018/01/11 20:47:18 - TS?
2018/01/11 20:47:18 - TS18/01/11, 20:47:18
2018/01/11 20:47:18 - CR1
2018/01/11 20:47:18 - CL0
2018/01/11 20:47:18 - WD 111 000 000
2018/01/11 20:47:18 - TE00:00:00.00
2018/01/11 20:47:18 - CF11110
2018/01/11 20:47:18 - EX00000
2018/01/11 20:47:19 - EZ1011101
2018/01/11 20:47:19 - CL0
2018/01/11 20:47:19 - WP1
2018/01/11 20:47:19 - WN70
2018/01/11 20:47:19 - WS200
2018/01/11 20:47:19 - WF200
2018/01/11 20:47:19 - BP0
2018/01/11 20:47:19 - BX2000
2018/01/11 20:47:19 - WB0
2018/01/11 20:47:19 - WV550
2018/01/11 20:47:19 - TP00:00.80
2018/01/11 20:47:19 - B?
2018/01/11 20:47:19 - W?
2018/01/11 20:47:20 - E?
2018/01/11 20:47:21 - C?
2018/01/11 20:47:22 - T?
2018/01/11 20:47:24 - PS0
2018/01/11 20:47:25 - In whbb_check_D_params
2018/01/11 20:47:25 - CF11110
2018/01/11 20:47:29 - TS?
2018/01/11 20:47:29 - TS180111204729
2018/01/11 20:47:29 - CR1
2018/01/11 20:47:29 - WD 111 00 0000
2018/01/11 20:47:29 - ND 111 00 0000
2018/01/11 20:47:30 - EA04500
2018/01/11 20:47:30 - NP1
2018/01/11 20:47:30 - NN75
2018/01/11 20:47:30 - NS2400
2018/01/11 20:47:30 - NF1600
2018/01/11 20:47:30 - WP1
2018/01/11 20:47:30 - WN115
2018/01/11 20:47:30 - WS1200
2018/01/11 20:47:30 - WF1600
2018/01/11 20:47:30 - BP0
2018/01/11 20:47:30 - BX10000
2018/01/11 20:47:30 - TP00:03.00
2018/01/11 20:47:30 - CX0,0
2018/01/11 20:47:30 - B?
2018/01/11 20:47:31 - N?
2018/01/11 20:47:32 - W?
2018/01/11 20:47:33 - E?
2018/01/11 20:47:36 - C?
2018/01/11 20:47:37 - T?
2018/01/11 20:47:38 - PS0
2018/01/11 20:47:39 - In os_check_D_params
2018/01/11 20:47:39 - in os_check_D_params: 111000000
2018/01/11 20:47:39 - in os_check_D_params: 111000000
2018/01/11 20:47:39 - CF11110
2018/01/11 20:47:40 - Entering Loggers.start_logging
2018/01/11 20:47:40 - /usr/local/bin/ser_bin -y 2018 -P ttyUSB7 -b 38400 -d /home/data/km1801_post/raw/wh300 -i /tmp/SerialLogger/inpipe.ttyUSB7 -o /tmp/SerialLogger/outpipe.ttyUSB7  -T 1515703660  -f km -F -m 1 -H 2  -e raw -lE -c -O -I -Z tcp://127.0.0.1:38010 2> /tmp/stderr.ttyUSB7 &
2018/01/11 20:47:40 - /usr/local/bin/ser_bin -y 2018 -P ttyUSB3 -b 38400 -d /home/data/km1801_post/raw/os38 -i /tmp/SerialLogger/inpipe.ttyUSB3 -o /tmp/SerialLogger/outpipe.ttyUSB3  -T 1515703660  -f km -F -m 1 -H 2  -e raw -lE -c -O -I 2> /tmp/stderr.ttyUSB3 &
2018/01/11 20:47:40 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB2 -b 9600 -d /home/data/km1801_post/raw/simrad -i /tmp/SerialLogger/inpipe.ttyUSB2 -o /tmp/SerialLogger/outpipe.ttyUSB2  -T 1515703660   -f km -F -m 1 -H 2  -e gps -Y2 -c '$GPGGA' 2> /tmp/stderr.ttyUSB2 &
2018/01/11 20:47:41 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB0 -b 9600 -d /home/data/km1801_post/raw/posmv -i /tmp/SerialLogger/inpipe.ttyUSB0 -o /tmp/SerialLogger/outpipe.ttyUSB0  -T 1515703660    -f km -F -m 1 -H 2  -e pmv -Y2 -c '$INGGA' '$PASHR' 2> /tmp/stderr.ttyUSB0 &
2018/01/11 20:47:41 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB5 -b 4800 -d /home/data/km1801_post/raw/gyro -i /tmp/SerialLogger/inpipe.ttyUSB5 -o /tmp/SerialLogger/outpipe.ttyUSB5  -T 1515703660   -f km -F -m 1 -H 2  -e hdg -Y2 -c -s5 '$HEHDT' 2> /tmp/stderr.ttyUSB5 &
2018/01/11 20:47:41 - Leaving Loggers.start_logging
2018/01/11 20:47:41 - Updated SVs_present from SVs and wrote cmds
2018/01/11 20:47:41 - 0
2018/01/11 20:47:41 - Updated SVs_present from SVs and wrote cmds
2018/01/11 20:47:41 - 1
2018/01/11 20:47:41 - Running /usr/local/currents/bin/DAS_while_logging.py
2018/01/11 20:47:41 - Exiting StartLogging
2018/01/11 20:47:43 - Entering StopLogging
2018/01/11 20:47:45 - Loggers.check_stop_logging: all log processes ended
2018/01/11 20:47:49 - TS?
2018/01/11 20:47:52 - TS?
2018/01/11 20:47:52 - Removed /home/adcp/flags/DAS.logging
2018/01/11 20:47:52 - Exiting StopLogging
2018/01/11 20:50:16 - enter StartLogging, resume =
2018/01/11 20:50:16 - 0
2018/01/11 20:50:19 - TS?
2018/01/11 20:50:19 - TS18/01/11, 20:50:19
2018/01/11 20:50:19 - CR1
2018/01/11 20:50:19 - CL0
2018/01/11 20:50:19 - WD 111 000 000
2018/01/11 20:50:19 - TE00:00:00.00
2018/01/11 20:50:19 - CF11110
2018/01/11 20:50:19 - EX00000
2018/01/11 20:50:20 - EZ1011101
2018/01/11 20:50:20 - CL0
2018/01/11 20:50:20 - WP1
2018/01/11 20:50:20 - WN70
2018/01/11 20:50:20 - WS200
2018/01/11 20:50:20 - WF200
2018/01/11 20:50:20 - BP0
2018/01/11 20:50:20 - BX2000
2018/01/11 20:50:20 - WB0
2018/01/11 20:50:20 - WV550
2018/01/11 20:50:20 - TP00:00.80
2018/01/11 20:50:20 - B?
2018/01/11 20:50:20 - W?
2018/01/11 20:50:21 - E?
2018/01/11 20:50:22 - C?
2018/01/11 20:50:23 - T?
2018/01/11 20:50:24 - PS0
2018/01/11 20:50:26 - In whbb_check_D_params
2018/01/11 20:50:26 - CF11110
2018/01/11 20:50:30 - TS?
2018/01/11 20:50:30 - TS180111205030
2018/01/11 20:50:30 - CR1
2018/01/11 20:50:30 - WD 111 00 0000
2018/01/11 20:50:30 - ND 111 00 0000
2018/01/11 20:50:30 - EA04500
2018/01/11 20:50:30 - NP1
2018/01/11 20:50:31 - NN75
2018/01/11 20:50:31 - NS2400
2018/01/11 20:50:31 - NF1600
2018/01/11 20:50:31 - WP1
2018/01/11 20:50:31 - WN115
2018/01/11 20:50:31 - WS1200
2018/01/11 20:50:31 - WF1600
2018/01/11 20:50:31 - BP0
2018/01/11 20:50:31 - BX10000
2018/01/11 20:50:31 - TP00:03.00
2018/01/11 20:50:31 - CX0,0
2018/01/11 20:50:31 - B?
2018/01/11 20:50:32 - N?
2018/01/11 20:50:33 - W?
2018/01/11 20:50:34 - E?
2018/01/11 20:50:37 - C?
2018/01/11 20:50:38 - T?
2018/01/11 20:50:39 - PS0
2018/01/11 20:50:40 - In os_check_D_params
2018/01/11 20:50:40 - in os_check_D_params: 111000000
2018/01/11 20:50:40 - in os_check_D_params: 111000000
2018/01/11 20:50:40 - CF11110
2018/01/11 20:50:41 - Entering Loggers.start_logging
2018/01/11 20:50:41 - /usr/local/bin/ser_bin -y 2018 -P ttyUSB7 -b 38400 -d /home/data/km1801_post/raw/wh300 -i /tmp/SerialLogger/inpipe.ttyUSB7 -o /tmp/SerialLogger/outpipe.ttyUSB7  -T 1515703841  -f km -F -m 1 -H 2  -e raw -lE -c -O -I -Z tcp://127.0.0.1:38010 2> /tmp/stderr.ttyUSB7 &
2018/01/11 20:50:41 - /usr/local/bin/ser_bin -y 2018 -P ttyUSB3 -b 38400 -d /home/data/km1801_post/raw/os38 -i /tmp/SerialLogger/inpipe.ttyUSB3 -o /tmp/SerialLogger/outpipe.ttyUSB3  -T 1515703841  -f km -F -m 1 -H 2  -e raw -lE -c -O -I 2> /tmp/stderr.ttyUSB3 &
2018/01/11 20:50:41 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB2 -b 9600 -d /home/data/km1801_post/raw/simrad -i /tmp/SerialLogger/inpipe.ttyUSB2 -o /tmp/SerialLogger/outpipe.ttyUSB2  -T 1515703841   -f km -F -m 1 -H 2  -e gps -Y2 -c '$GPGGA' 2> /tmp/stderr.ttyUSB2 &
2018/01/11 20:50:42 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB0 -b 9600 -d /home/data/km1801_post/raw/posmv -i /tmp/SerialLogger/inpipe.ttyUSB0 -o /tmp/SerialLogger/outpipe.ttyUSB0  -T 1515703841    -f km -F -m 1 -H 2  -e pmv -Y2 -c '$INGGA' '$PASHR' 2> /tmp/stderr.ttyUSB0 &
2018/01/11 20:50:42 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB5 -b 4800 -d /home/data/km1801_post/raw/gyro -i /tmp/SerialLogger/inpipe.ttyUSB5 -o /tmp/SerialLogger/outpipe.ttyUSB5  -T 1515703841   -f km -F -m 1 -H 2  -e hdg -Y2 -c -s5 '$HEHDT' 2> /tmp/stderr.ttyUSB5 &
2018/01/11 20:50:42 - Leaving Loggers.start_logging
2018/01/11 20:50:42 - Updated SVs_present from SVs and wrote cmds
2018/01/11 20:50:42 - 0
2018/01/11 20:50:42 - Updated SVs_present from SVs and wrote cmds
2018/01/11 20:50:42 - 1
2018/01/11 20:50:42 - Running /usr/local/currents/bin/DAS_while_logging.py
2018/01/11 20:50:42 - Exiting StartLogging
2018/01/16 18:03:08 - Entering StopLogging
2018/01/16 18:03:10 - Loggers.check_stop_logging: all log processes ended
2018/01/16 18:03:14 - TS?
2018/01/16 18:03:19 - TS?
2018/01/16 18:03:19 - Removed /home/adcp/flags/DAS.logging
2018/01/16 18:03:19 - Exiting StopLogging
2018/01/16 18:03:29 - Ready to destroy_loggers.
2018/01/16 18:03:29 - After destroy_loggers.
2018/01/16 18:03:29 - cp -au /home/adcp/log/* /home/data/km1801_post/raw/log/
2018/01/16 18:03:30 - End Cruise
2018/01/16 18:03:39 - adcptree.py /home/data/km1802/proc/wh300 -d uhdas --configpath /home/data/km1802/raw/config --cruisename km1802
2018/01/16 18:03:39 - found adcp templates at  /usr/local/lib/python2.7/dist-packages/pycurrents/adcp/templates
otherdemo is /usr/local/lib/python2.7/dist-packages/pycurrents/adcp/templates/uhdas_template


** data type is uhdas
making directory /home/data/km1802/proc/wh300/adcpdb
making directory /home/data/km1802/proc/wh300/cal
making directory /home/data/km1802/proc/wh300/cal/watertrk
making directory /home/data/km1802/proc/wh300/cal/botmtrk
making directory /home/data/km1802/proc/wh300/cal/heading
making directory /home/data/km1802/proc/wh300/cal/rotate
making directory /home/data/km1802/proc/wh300/contour
making directory /home/data/km1802/proc/wh300/edit
making directory /home/data/km1802/proc/wh300/grid
making directory /home/data/km1802/proc/wh300/load
making directory /home/data/km1802/proc/wh300/nav
making directory /home/data/km1802/proc/wh300/quality
making directory /home/data/km1802/proc/wh300/ping
making directory /home/data/km1802/proc/wh300/scan
making directory /home/data/km1802/proc/wh300/stick
making directory /home/data/km1802/proc/wh300/vector
- copying additional files for data type uhdas

- config files for raw processing are in /home/data/km1802/proc/wh300/config
copying config files using this wildcard expansion: /home/data/km1802/raw/config/km1802*
2018/01/16 18:03:39 - adcptree.py /home/data/km1802/proc/os38bb -d uhdas --configpath /home/data/km1802/raw/config --cruisename km1802
2018/01/16 18:03:39 - found adcp templates at  /usr/local/lib/python2.7/dist-packages/pycurrents/adcp/templates
otherdemo is /usr/local/lib/python2.7/dist-packages/pycurrents/adcp/templates/uhdas_template


** data type is uhdas
making directory /home/data/km1802/proc/os38bb/adcpdb
making directory /home/data/km1802/proc/os38bb/cal
making directory /home/data/km1802/proc/os38bb/cal/watertrk
making directory /home/data/km1802/proc/os38bb/cal/botmtrk
making directory /home/data/km1802/proc/os38bb/cal/heading
making directory /home/data/km1802/proc/os38bb/cal/rotate
making directory /home/data/km1802/proc/os38bb/contour
making directory /home/data/km1802/proc/os38bb/edit
making directory /home/data/km1802/proc/os38bb/grid
making directory /home/data/km1802/proc/os38bb/load
making directory /home/data/km1802/proc/os38bb/nav
making directory /home/data/km1802/proc/os38bb/quality
making directory /home/data/km1802/proc/os38bb/ping
making directory /home/data/km1802/proc/os38bb/scan
making directory /home/data/km1802/proc/os38bb/stick
making directory /home/data/km1802/proc/os38bb/vector
- copying additional files for data type uhdas

- config files for raw processing are in /home/data/km1802/proc/os38bb/config
copying config files using this wildcard expansion: /home/data/km1802/raw/config/km1802*
2018/01/16 18:03:39 - adcptree.py /home/data/km1802/proc/os38nb -d uhdas --configpath /home/data/km1802/raw/config --cruisename km1802
2018/01/16 18:03:39 - found adcp templates at  /usr/local/lib/python2.7/dist-packages/pycurrents/adcp/templates
otherdemo is /usr/local/lib/python2.7/dist-packages/pycurrents/adcp/templates/uhdas_template


** data type is uhdas
making directory /home/data/km1802/proc/os38nb/adcpdb
making directory /home/data/km1802/proc/os38nb/cal
making directory /home/data/km1802/proc/os38nb/cal/watertrk
making directory /home/data/km1802/proc/os38nb/cal/botmtrk
making directory /home/data/km1802/proc/os38nb/cal/heading
making directory /home/data/km1802/proc/os38nb/cal/rotate
making directory /home/data/km1802/proc/os38nb/contour
making directory /home/data/km1802/proc/os38nb/edit
making directory /home/data/km1802/proc/os38nb/grid
making directory /home/data/km1802/proc/os38nb/load
making directory /home/data/km1802/proc/os38nb/nav
making directory /home/data/km1802/proc/os38nb/quality
making directory /home/data/km1802/proc/os38nb/ping
making directory /home/data/km1802/proc/os38nb/scan
making directory /home/data/km1802/proc/os38nb/stick
making directory /home/data/km1802/proc/os38nb/vector
- copying additional files for data type uhdas

- config files for raw processing are in /home/data/km1802/proc/os38nb/config
copying config files using this wildcard expansion: /home/data/km1802/raw/config/km1802*
2018/01/16 18:03:40 - Entering buildLoggers
2018/01/16 18:03:40 - device:
2018/01/16 18:03:40 - ttyUSB5
2018/01/16 18:03:40 - -f km -F -m 1 -H 2  -e raw -lE -c -O -I -Z tcp://127.0.0.1:38010
2018/01/16 18:03:40 - Created output directory </home/data/km1802/raw/wh300> with mode 775
2018/01/16 18:03:40 - device:
2018/01/16 18:03:40 - ttyUSB5
2018/01/16 18:03:40 - -f km -F -m 1 -H 2  -e raw -lE -c -O -I
2018/01/16 18:03:40 - Created output directory </home/data/km1802/raw/os38> with mode 775
2018/01/16 18:03:40 - device:
2018/01/16 18:03:40 - ttyUSB5
2018/01/16 18:03:40 - -f km -F -m 1 -H 2  -e gps -Y2 -c
2018/01/16 18:03:40 - Created output directory </home/data/km1802/raw/simrad> with mode 775
2018/01/16 18:03:40 - device:
2018/01/16 18:03:40 - ttyUSB5
2018/01/16 18:03:40 - -f km -F -m 1 -H 2  -e pmv -Y2 -c
2018/01/16 18:03:40 - Created output directory </home/data/km1802/raw/posmv> with mode 775
2018/01/16 18:03:40 - device:
2018/01/16 18:03:40 - ttyUSB5
2018/01/16 18:03:40 - -f km -F -m 1 -H 2  -e hdg -Y2 -c -s5
2018/01/16 18:03:40 - Created output directory </home/data/km1802/raw/gyro> with mode 775
2018/01/16 18:03:40 - >>>> C_ss enabled <<<<<
2018/01/16 18:03:40 - Leaving buildLoggers
2018/01/16 18:03:40 - Start Cruise
2018/01/16 18:03:43 - enter StartLogging, resume =
2018/01/16 18:03:43 - 0
2018/01/16 18:03:46 - TS?
2018/01/16 18:03:46 - TS18/01/16, 18:03:46
2018/01/16 18:03:46 - CR1
2018/01/16 18:03:46 - CL0
2018/01/16 18:03:46 - WD 111 000 000
2018/01/16 18:03:46 - TE00:00:00.00
2018/01/16 18:03:46 - CF11110
2018/01/16 18:03:46 - EX00000
2018/01/16 18:03:46 - EZ1011101
2018/01/16 18:03:46 - CL0
2018/01/16 18:03:46 - WP1
2018/01/16 18:03:46 - WN70
2018/01/16 18:03:46 - WS200
2018/01/16 18:03:47 - WF200
2018/01/16 18:03:47 - BP0
2018/01/16 18:03:47 - BX2000
2018/01/16 18:03:47 - WB0
2018/01/16 18:03:47 - WV550
2018/01/16 18:03:47 - TP00:00.80
2018/01/16 18:03:47 - B?
2018/01/16 18:03:47 - W?
2018/01/16 18:03:48 - E?
2018/01/16 18:03:49 - C?
2018/01/16 18:03:50 - T?
2018/01/16 18:03:51 - PS0
2018/01/16 18:03:53 - In whbb_check_D_params
2018/01/16 18:03:53 - CF11110
2018/01/16 18:03:57 - TS?
2018/01/16 18:03:57 - TS180116180357
2018/01/16 18:03:57 - CR1
2018/01/16 18:03:57 - WD 111 00 0000
2018/01/16 18:03:57 - ND 111 00 0000
2018/01/16 18:03:57 - EA04500
2018/01/16 18:03:57 - NP1
2018/01/16 18:03:57 - NN75
2018/01/16 18:03:57 - NS2400
2018/01/16 18:03:57 - NF1600
2018/01/16 18:03:57 - WP1
2018/01/16 18:03:57 - WN115
2018/01/16 18:03:57 - WS1200
2018/01/16 18:03:58 - WF1600
2018/01/16 18:03:58 - BP0
2018/01/16 18:03:58 - BX10000
2018/01/16 18:03:58 - TP00:03.00
2018/01/16 18:03:58 - CX0,0
2018/01/16 18:03:58 - B?
2018/01/16 18:03:59 - N?
2018/01/16 18:04:00 - W?
2018/01/16 18:04:01 - E?
2018/01/16 18:04:03 - C?
2018/01/16 18:04:05 - T?
2018/01/16 18:04:06 - PS0
2018/01/16 18:04:06 - In os_check_D_params
2018/01/16 18:04:06 - in os_check_D_params: 111000000
2018/01/16 18:04:06 - in os_check_D_params: 111000000
2018/01/16 18:04:06 - CF11110
2018/01/16 18:04:07 - Entering Loggers.start_logging
2018/01/16 18:04:07 - /usr/local/bin/ser_bin -y 2018 -P ttyUSB7 -b 38400 -d /home/data/km1802/raw/wh300 -i /tmp/SerialLogger/inpipe.ttyUSB7 -o /tmp/SerialLogger/outpipe.ttyUSB7  -T 1516125847  -f km -F -m 1 -H 2  -e raw -lE -c -O -I -Z tcp://127.0.0.1:38010 2> /tmp/stderr.ttyUSB7 &
2018/01/16 18:04:08 - /usr/local/bin/ser_bin -y 2018 -P ttyUSB3 -b 38400 -d /home/data/km1802/raw/os38 -i /tmp/SerialLogger/inpipe.ttyUSB3 -o /tmp/SerialLogger/outpipe.ttyUSB3  -T 1516125847  -f km -F -m 1 -H 2  -e raw -lE -c -O -I 2> /tmp/stderr.ttyUSB3 &
2018/01/16 18:04:08 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB2 -b 9600 -d /home/data/km1802/raw/simrad -i /tmp/SerialLogger/inpipe.ttyUSB2 -o /tmp/SerialLogger/outpipe.ttyUSB2  -T 1516125847   -f km -F -m 1 -H 2  -e gps -Y2 -c '$GPGGA' 2> /tmp/stderr.ttyUSB2 &
2018/01/16 18:04:08 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB0 -b 9600 -d /home/data/km1802/raw/posmv -i /tmp/SerialLogger/inpipe.ttyUSB0 -o /tmp/SerialLogger/outpipe.ttyUSB0  -T 1516125847    -f km -F -m 1 -H 2  -e pmv -Y2 -c '$INGGA' '$PASHR' 2> /tmp/stderr.ttyUSB0 &
2018/01/16 18:04:08 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB5 -b 4800 -d /home/data/km1802/raw/gyro -i /tmp/SerialLogger/inpipe.ttyUSB5 -o /tmp/SerialLogger/outpipe.ttyUSB5  -T 1516125847   -f km -F -m 1 -H 2  -e hdg -Y2 -c -s5 '$HEHDT' 2> /tmp/stderr.ttyUSB5 &
2018/01/16 18:04:09 - Leaving Loggers.start_logging
2018/01/16 18:04:09 - Updated SVs_present from SVs and wrote cmds
2018/01/16 18:04:09 - 0
2018/01/16 18:04:09 - Updated SVs_present from SVs and wrote cmds
2018/01/16 18:04:09 - 1
2018/01/16 18:04:09 - Running /usr/local/currents/bin/DAS_while_logging.py
2018/01/16 18:04:09 - Exiting StartLogging
2018/01/16 18:24:49 - Entering StopLogging
2018/01/16 18:24:52 - Loggers.check_stop_logging: all log processes ended
2018/01/16 18:24:55 - TS?
2018/01/16 18:24:58 - TS?
2018/01/16 18:24:59 - Removed /home/adcp/flags/DAS.logging
2018/01/16 18:24:59 - Exiting StopLogging
2018/01/16 18:25:06 - Stopping DAS_while_cruise.py
2018/01/16 18:25:06 - mainloop ended