2017/12/27 02:13:18 - currents01km 4.8.0-36-generic #36~16.04.1-Ubuntu SMP Sun Feb 5 09:39:57 UTC 2017 x86_64
2017/12/27 02:13:19 - /dev/ttyUSB7
2017/12/27 02:13:19 - /dev/ttyUSB3
2017/12/27 02:13:19 - In CruiseSetup.init
2017/12/27 02:13:19 - Resuming Cruise
2017/12/27 02:13:20 - Entering buildLoggers
2017/12/27 02:13:20 - device:
2017/12/27 02:13:20 - ttyUSB5
2017/12/27 02:13:20 - -f km -F -m 1 -H 2  -e raw -lE -c -O -I -Z tcp://127.0.0.1:38010
2017/12/27 02:13:20 - device:
2017/12/27 02:13:20 - ttyUSB5
2017/12/27 02:13:20 - -f km -F -m 1 -H 2  -e raw -lE -c -O -I
2017/12/27 02:13:20 - device:
2017/12/27 02:13:20 - ttyUSB5
2017/12/27 02:13:20 - -f km -F -m 1 -H 2  -e gps -Y2 -c
2017/12/27 02:13:20 - device:
2017/12/27 02:13:20 - ttyUSB5
2017/12/27 02:13:20 - -f km -F -m 1 -H 2  -e pmv -Y2 -c
2017/12/27 02:13:20 - device:
2017/12/27 02:13:20 - ttyUSB5
2017/12/27 02:13:20 - -f km -F -m 1 -H 2  -e hdg -Y2 -c -s5
2017/12/27 02:13:20 - >>>> C_ss enabled <<<<<
2017/12/27 02:13:20 - Leaving buildLoggers
2017/12/27 02:13:20 - About to run mainloop
2017/12/27 02:13:26 - enter StartLogging, resume =
2017/12/27 02:13:26 - 0
2017/12/27 02:13:29 - TS?
2017/12/27 02:13:30 - TS17/12/27, 02:13:30
2017/12/27 02:13:30 - CR1
2017/12/27 02:13:30 - CL0
2017/12/27 02:13:30 - WD 111 000 000
2017/12/27 02:13:30 - TE00:00:00.00
2017/12/27 02:13:30 - CF11110
2017/12/27 02:13:30 - EX00000
2017/12/27 02:13:30 - EZ1011101
2017/12/27 02:13:30 - CL0
2017/12/27 02:13:30 - WP1
2017/12/27 02:13:30 - WN70
2017/12/27 02:13:30 - WS200
2017/12/27 02:13:30 - WF200
2017/12/27 02:13:30 - BP0
2017/12/27 02:13:30 - BX2000
2017/12/27 02:13:30 - WB0
2017/12/27 02:13:31 - WV550
2017/12/27 02:13:31 - TP00:00.80
2017/12/27 02:13:31 - B?
2017/12/27 02:13:31 - W?
2017/12/27 02:13:32 - E?
2017/12/27 02:13:33 - C?
2017/12/27 02:13:34 - T?
2017/12/27 02:13:35 - PS0
2017/12/27 02:13:36 - In whbb_check_D_params
2017/12/27 02:13:36 - CF11110
2017/12/27 02:13:41 - TS?
2017/12/27 02:13:41 - TS171227021341
2017/12/27 02:13:41 - CR1
2017/12/27 02:13:41 - WD 111 00 0000
2017/12/27 02:13:42 - ND 111 00 0000
2017/12/27 02:13:42 - EA04500
2017/12/27 02:13:42 - NP1
2017/12/27 02:13:42 - NN75
2017/12/27 02:13:42 - NS2400
2017/12/27 02:13:42 - NF1600
2017/12/27 02:13:42 - WP1
2017/12/27 02:13:42 - WN115
2017/12/27 02:13:42 - WS1200
2017/12/27 02:13:42 - WF1600
2017/12/27 02:13:42 - BP0
2017/12/27 02:13:42 - BX10000
2017/12/27 02:13:42 - TP00:03.00
2017/12/27 02:13:42 - CX0,0
2017/12/27 02:13:42 - B?
2017/12/27 02:13:43 - N?
2017/12/27 02:13:44 - W?
2017/12/27 02:13:46 - E?
2017/12/27 02:13:48 - C?
2017/12/27 02:13:50 - T?
2017/12/27 02:13:50 - PS0
2017/12/27 02:13:51 - In os_check_D_params
2017/12/27 02:13:51 - in os_check_D_params: 111000000
2017/12/27 02:13:51 - in os_check_D_params: 111000000
2017/12/27 02:13:51 - CF11110
2017/12/27 02:13:52 - Entering Loggers.start_logging
2017/12/27 02:13:52 - /usr/local/bin/ser_bin -y 2017 -P ttyUSB7 -b 38400 -d /home/data/km1718post/raw/wh300 -i /tmp/SerialLogger/inpipe.ttyUSB7 -o /tmp/SerialLogger/outpipe.ttyUSB7  -T 1514340832  -f km -F -m 1 -H 2  -e raw -lE -c -O -I -Z tcp://127.0.0.1:38010 2> /tmp/stderr.ttyUSB7 &
2017/12/27 02:13:52 - /usr/local/bin/ser_bin -y 2017 -P ttyUSB3 -b 38400 -d /home/data/km1718post/raw/os38 -i /tmp/SerialLogger/inpipe.ttyUSB3 -o /tmp/SerialLogger/outpipe.ttyUSB3  -T 1514340832  -f km -F -m 1 -H 2  -e raw -lE -c -O -I 2> /tmp/stderr.ttyUSB3 &
2017/12/27 02:13:53 - /usr/local/bin/ser_asc -y 2017 -P ttyUSB2 -b 9600 -d /home/data/km1718post/raw/simrad -i /tmp/SerialLogger/inpipe.ttyUSB2 -o /tmp/SerialLogger/outpipe.ttyUSB2  -T 1514340832   -f km -F -m 1 -H 2  -e gps -Y2 -c '$GPGGA' 2> /tmp/stderr.ttyUSB2 &
2017/12/27 02:13:53 - /usr/local/bin/ser_asc -y 2017 -P ttyUSB0 -b 9600 -d /home/data/km1718post/raw/posmv -i /tmp/SerialLogger/inpipe.ttyUSB0 -o /tmp/SerialLogger/outpipe.ttyUSB0  -T 1514340832    -f km -F -m 1 -H 2  -e pmv -Y2 -c '$INGGA' '$PASHR' 2> /tmp/stderr.ttyUSB0 &
2017/12/27 02:13:53 - /usr/local/bin/ser_asc -y 2017 -P ttyUSB5 -b 4800 -d /home/data/km1718post/raw/gyro -i /tmp/SerialLogger/inpipe.ttyUSB5 -o /tmp/SerialLogger/outpipe.ttyUSB5  -T 1514340832   -f km -F -m 1 -H 2  -e hdg -Y2 -c -s5 '$HEHDT' 2> /tmp/stderr.ttyUSB5 &
2017/12/27 02:13:53 - Leaving Loggers.start_logging
2017/12/27 02:13:53 - Updated SVs_present from SVs and wrote cmds
2017/12/27 02:13:53 - 0
2017/12/27 02:13:53 - Updated SVs_present from SVs and wrote cmds
2017/12/27 02:13:53 - 1
2017/12/27 02:13:53 - Running /usr/local/currents/bin/DAS_while_logging.py
2017/12/27 02:13:53 - Exiting StartLogging
2018/01/09 18:37:47 - Entering StopLogging
2018/01/09 18:37:49 - Loggers.check_stop_logging: all log processes ended
2018/01/09 18:37:53 - TS?
2018/01/09 18:37:56 - TS?
2018/01/09 18:37:56 - Removed /home/adcp/flags/DAS.logging
2018/01/09 18:37:56 - Exiting StopLogging
2018/01/09 18:38:00 - Ready to destroy_loggers.
2018/01/09 18:38:00 - After destroy_loggers.
2018/01/09 18:38:00 - cp -au /home/adcp/log/* /home/data/km1718post/raw/log/
2018/01/09 18:38:01 - End Cruise
2018/01/09 18:38:10 - adcptree.py /home/data/km1801/proc/wh300 -d uhdas --configpath /home/data/km1801/raw/config --cruisename km1801
2018/01/09 18:38:10 - found adcp templates at  /usr/local/lib/python2.7/dist-packages/pycurrents/adcp/templates
otherdemo is /usr/local/lib/python2.7/dist-packages/pycurrents/adcp/templates/uhdas_template


** data type is uhdas
making directory /home/data/km1801/proc/wh300/adcpdb
making directory /home/data/km1801/proc/wh300/cal
making directory /home/data/km1801/proc/wh300/cal/watertrk
making directory /home/data/km1801/proc/wh300/cal/botmtrk
making directory /home/data/km1801/proc/wh300/cal/heading
making directory /home/data/km1801/proc/wh300/cal/rotate
making directory /home/data/km1801/proc/wh300/contour
making directory /home/data/km1801/proc/wh300/edit
making directory /home/data/km1801/proc/wh300/grid
making directory /home/data/km1801/proc/wh300/load
making directory /home/data/km1801/proc/wh300/nav
making directory /home/data/km1801/proc/wh300/quality
making directory /home/data/km1801/proc/wh300/ping
making directory /home/data/km1801/proc/wh300/scan
making directory /home/data/km1801/proc/wh300/stick
making directory /home/data/km1801/proc/wh300/vector
- copying additional files for data type uhdas

- config files for raw processing are in /home/data/km1801/proc/wh300/config
copying config files using this wildcard expansion: /home/data/km1801/raw/config/km1801*
2018/01/09 18:38:10 - adcptree.py /home/data/km1801/proc/os38bb -d uhdas --configpath /home/data/km1801/raw/config --cruisename km1801
2018/01/09 18:38:10 - found adcp templates at  /usr/local/lib/python2.7/dist-packages/pycurrents/adcp/templates
otherdemo is /usr/local/lib/python2.7/dist-packages/pycurrents/adcp/templates/uhdas_template


** data type is uhdas
making directory /home/data/km1801/proc/os38bb/adcpdb
making directory /home/data/km1801/proc/os38bb/cal
making directory /home/data/km1801/proc/os38bb/cal/watertrk
making directory /home/data/km1801/proc/os38bb/cal/botmtrk
making directory /home/data/km1801/proc/os38bb/cal/heading
making directory /home/data/km1801/proc/os38bb/cal/rotate
making directory /home/data/km1801/proc/os38bb/contour
making directory /home/data/km1801/proc/os38bb/edit
making directory /home/data/km1801/proc/os38bb/grid
making directory /home/data/km1801/proc/os38bb/load
making directory /home/data/km1801/proc/os38bb/nav
making directory /home/data/km1801/proc/os38bb/quality
making directory /home/data/km1801/proc/os38bb/ping
making directory /home/data/km1801/proc/os38bb/scan
making directory /home/data/km1801/proc/os38bb/stick
making directory /home/data/km1801/proc/os38bb/vector
- copying additional files for data type uhdas

- config files for raw processing are in /home/data/km1801/proc/os38bb/config
copying config files using this wildcard expansion: /home/data/km1801/raw/config/km1801*
2018/01/09 18:38:10 - adcptree.py /home/data/km1801/proc/os38nb -d uhdas --configpath /home/data/km1801/raw/config --cruisename km1801
2018/01/09 18:38:11 - found adcp templates at  /usr/local/lib/python2.7/dist-packages/pycurrents/adcp/templates
otherdemo is /usr/local/lib/python2.7/dist-packages/pycurrents/adcp/templates/uhdas_template


** data type is uhdas
making directory /home/data/km1801/proc/os38nb/adcpdb
making directory /home/data/km1801/proc/os38nb/cal
making directory /home/data/km1801/proc/os38nb/cal/watertrk
making directory /home/data/km1801/proc/os38nb/cal/botmtrk
making directory /home/data/km1801/proc/os38nb/cal/heading
making directory /home/data/km1801/proc/os38nb/cal/rotate
making directory /home/data/km1801/proc/os38nb/contour
making directory /home/data/km1801/proc/os38nb/edit
making directory /home/data/km1801/proc/os38nb/grid
making directory /home/data/km1801/proc/os38nb/load
making directory /home/data/km1801/proc/os38nb/nav
making directory /home/data/km1801/proc/os38nb/quality
making directory /home/data/km1801/proc/os38nb/ping
making directory /home/data/km1801/proc/os38nb/scan
making directory /home/data/km1801/proc/os38nb/stick
making directory /home/data/km1801/proc/os38nb/vector
- copying additional files for data type uhdas

- config files for raw processing are in /home/data/km1801/proc/os38nb/config
copying config files using this wildcard expansion: /home/data/km1801/raw/config/km1801*
2018/01/09 18:38:12 - Entering buildLoggers
2018/01/09 18:38:12 - device:
2018/01/09 18:38:12 - ttyUSB5
2018/01/09 18:38:12 - -f km -F -m 1 -H 2  -e raw -lE -c -O -I -Z tcp://127.0.0.1:38010
2018/01/09 18:38:12 - Created output directory </home/data/km1801/raw/wh300> with mode 775
2018/01/09 18:38:12 - device:
2018/01/09 18:38:12 - ttyUSB5
2018/01/09 18:38:12 - -f km -F -m 1 -H 2  -e raw -lE -c -O -I
2018/01/09 18:38:12 - Created output directory </home/data/km1801/raw/os38> with mode 775
2018/01/09 18:38:12 - device:
2018/01/09 18:38:12 - ttyUSB5
2018/01/09 18:38:12 - -f km -F -m 1 -H 2  -e gps -Y2 -c
2018/01/09 18:38:12 - Created output directory </home/data/km1801/raw/simrad> with mode 775
2018/01/09 18:38:12 - device:
2018/01/09 18:38:12 - ttyUSB5
2018/01/09 18:38:12 - -f km -F -m 1 -H 2  -e pmv -Y2 -c
2018/01/09 18:38:12 - Created output directory </home/data/km1801/raw/posmv> with mode 775
2018/01/09 18:38:12 - device:
2018/01/09 18:38:12 - ttyUSB5
2018/01/09 18:38:12 - -f km -F -m 1 -H 2  -e hdg -Y2 -c -s5
2018/01/09 18:38:12 - Created output directory </home/data/km1801/raw/gyro> with mode 775
2018/01/09 18:38:12 - >>>> C_ss enabled <<<<<
2018/01/09 18:38:12 - Leaving buildLoggers
2018/01/09 18:38:12 - Start Cruise
2018/01/09 18:38:25 - enter StartLogging, resume =
2018/01/09 18:38:25 - 0
2018/01/09 18:38:28 - TS?
2018/01/09 18:38:28 - TS18/01/09, 18:38:28
2018/01/09 18:38:28 - CR1
2018/01/09 18:38:28 - CL0
2018/01/09 18:38:28 - WD 111 000 000
2018/01/09 18:38:28 - TE00:00:00.00
2018/01/09 18:38:28 - CF11110
2018/01/09 18:38:28 - EX00000
2018/01/09 18:38:28 - EZ1011101
2018/01/09 18:38:28 - CL0
2018/01/09 18:38:28 - WP1
2018/01/09 18:38:28 - WN70
2018/01/09 18:38:28 - WS200
2018/01/09 18:38:28 - WF200
2018/01/09 18:38:29 - BP0
2018/01/09 18:38:29 - BX2000
2018/01/09 18:38:29 - WB0
2018/01/09 18:38:29 - WV550
2018/01/09 18:38:29 - TP00:00.80
2018/01/09 18:38:29 - B?
2018/01/09 18:38:29 - W?
2018/01/09 18:38:30 - E?
2018/01/09 18:38:31 - C?
2018/01/09 18:38:32 - T?
2018/01/09 18:38:33 - PS0
2018/01/09 18:38:35 - In whbb_check_D_params
2018/01/09 18:38:35 - CF11110
2018/01/09 18:38:40 - TS?
2018/01/09 18:38:40 - TS180109183840
2018/01/09 18:38:40 - CR1
2018/01/09 18:38:40 - WD 111 00 0000
2018/01/09 18:38:40 - ND 111 00 0000
2018/01/09 18:38:40 - EA04500
2018/01/09 18:38:41 - NP1
2018/01/09 18:38:41 - NN75
2018/01/09 18:38:41 - NS2400
2018/01/09 18:38:41 - NF1600
2018/01/09 18:38:41 - WP1
2018/01/09 18:38:41 - WN115
2018/01/09 18:38:41 - WS1200
2018/01/09 18:38:41 - WF1600
2018/01/09 18:38:41 - BP0
2018/01/09 18:38:41 - BX10000
2018/01/09 18:38:41 - TP00:03.00
2018/01/09 18:38:41 - CX0,0
2018/01/09 18:38:41 - B?
2018/01/09 18:38:42 - N?
2018/01/09 18:38:43 - W?
2018/01/09 18:38:44 - E?
2018/01/09 18:38:47 - C?
2018/01/09 18:38:48 - T?
2018/01/09 18:38:49 - PS0
2018/01/09 18:38:50 - In os_check_D_params
2018/01/09 18:38:50 - in os_check_D_params: 111000000
2018/01/09 18:38:50 - in os_check_D_params: 111000000
2018/01/09 18:38:50 - CF11110
2018/01/09 18:38:51 - Entering Loggers.start_logging
2018/01/09 18:38:51 - /usr/local/bin/ser_bin -y 2018 -P ttyUSB7 -b 38400 -d /home/data/km1801/raw/wh300 -i /tmp/SerialLogger/inpipe.ttyUSB7 -o /tmp/SerialLogger/outpipe.ttyUSB7  -T 1515523131  -f km -F -m 1 -H 2  -e raw -lE -c -O -I -Z tcp://127.0.0.1:38010 2> /tmp/stderr.ttyUSB7 &
2018/01/09 18:38:51 - /usr/local/bin/ser_bin -y 2018 -P ttyUSB3 -b 38400 -d /home/data/km1801/raw/os38 -i /tmp/SerialLogger/inpipe.ttyUSB3 -o /tmp/SerialLogger/outpipe.ttyUSB3  -T 1515523131  -f km -F -m 1 -H 2  -e raw -lE -c -O -I 2> /tmp/stderr.ttyUSB3 &
2018/01/09 18:38:51 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB2 -b 9600 -d /home/data/km1801/raw/simrad -i /tmp/SerialLogger/inpipe.ttyUSB2 -o /tmp/SerialLogger/outpipe.ttyUSB2  -T 1515523131   -f km -F -m 1 -H 2  -e gps -Y2 -c '$GPGGA' 2> /tmp/stderr.ttyUSB2 &
2018/01/09 18:38:52 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB0 -b 9600 -d /home/data/km1801/raw/posmv -i /tmp/SerialLogger/inpipe.ttyUSB0 -o /tmp/SerialLogger/outpipe.ttyUSB0  -T 1515523131    -f km -F -m 1 -H 2  -e pmv -Y2 -c '$INGGA' '$PASHR' 2> /tmp/stderr.ttyUSB0 &
2018/01/09 18:38:52 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB5 -b 4800 -d /home/data/km1801/raw/gyro -i /tmp/SerialLogger/inpipe.ttyUSB5 -o /tmp/SerialLogger/outpipe.ttyUSB5  -T 1515523131   -f km -F -m 1 -H 2  -e hdg -Y2 -c -s5 '$HEHDT' 2> /tmp/stderr.ttyUSB5 &
2018/01/09 18:38:52 - Leaving Loggers.start_logging
2018/01/09 18:38:52 - Updated SVs_present from SVs and wrote cmds
2018/01/09 18:38:52 - 0
2018/01/09 18:38:52 - Updated SVs_present from SVs and wrote cmds
2018/01/09 18:38:52 - 1
2018/01/09 18:38:52 - Running /usr/local/currents/bin/DAS_while_logging.py
2018/01/09 18:38:52 - Exiting StartLogging
2018/01/10 02:55:57 - Entering StopLogging
2018/01/10 02:55:59 - Loggers.check_stop_logging: all log processes ended
2018/01/10 02:56:02 - TS?
2018/01/10 02:56:05 - TS?
2018/01/10 02:56:06 - Removed /home/adcp/flags/DAS.logging
2018/01/10 02:56:06 - Exiting StopLogging
2018/01/10 02:56:16 - Ready to destroy_loggers.
2018/01/10 02:56:16 - After destroy_loggers.
2018/01/10 02:56:16 - cp -au /home/adcp/log/* /home/data/km1801/raw/log/
2018/01/10 02:56:16 - End Cruise
2018/01/11 20:45:32 - adcptree.py /home/data/km1801_post/proc/wh300 -d uhdas --configpath /home/data/km1801_post/raw/config --cruisename km1801_post
2018/01/11 20:45:32 - found adcp templates at  /usr/local/lib/python2.7/dist-packages/pycurrents/adcp/templates
otherdemo is /usr/local/lib/python2.7/dist-packages/pycurrents/adcp/templates/uhdas_template


** data type is uhdas
making directory /home/data/km1801_post/proc/wh300/adcpdb
making directory /home/data/km1801_post/proc/wh300/cal
making directory /home/data/km1801_post/proc/wh300/cal/watertrk
making directory /home/data/km1801_post/proc/wh300/cal/botmtrk
making directory /home/data/km1801_post/proc/wh300/cal/heading
making directory /home/data/km1801_post/proc/wh300/cal/rotate
making directory /home/data/km1801_post/proc/wh300/contour
making directory /home/data/km1801_post/proc/wh300/edit
making directory /home/data/km1801_post/proc/wh300/grid
making directory /home/data/km1801_post/proc/wh300/load
making directory /home/data/km1801_post/proc/wh300/nav
making directory /home/data/km1801_post/proc/wh300/quality
making directory /home/data/km1801_post/proc/wh300/ping
making directory /home/data/km1801_post/proc/wh300/scan
making directory /home/data/km1801_post/proc/wh300/stick
making directory /home/data/km1801_post/proc/wh300/vector
- copying additional files for data type uhdas

- config files for raw processing are in /home/data/km1801_post/proc/wh300/config
copying config files using this wildcard expansion: /home/data/km1801_post/raw/config/km1801_post*
2018/01/11 20:45:32 - adcptree.py /home/data/km1801_post/proc/os38bb -d uhdas --configpath /home/data/km1801_post/raw/config --cruisename km1801_post
2018/01/11 20:45:32 - found adcp templates at  /usr/local/lib/python2.7/dist-packages/pycurrents/adcp/templates
otherdemo is /usr/local/lib/python2.7/dist-packages/pycurrents/adcp/templates/uhdas_template


** data type is uhdas
making directory /home/data/km1801_post/proc/os38bb/adcpdb
making directory /home/data/km1801_post/proc/os38bb/cal
making directory /home/data/km1801_post/proc/os38bb/cal/watertrk
making directory /home/data/km1801_post/proc/os38bb/cal/botmtrk
making directory /home/data/km1801_post/proc/os38bb/cal/heading
making directory /home/data/km1801_post/proc/os38bb/cal/rotate
making directory /home/data/km1801_post/proc/os38bb/contour
making directory /home/data/km1801_post/proc/os38bb/edit
making directory /home/data/km1801_post/proc/os38bb/grid
making directory /home/data/km1801_post/proc/os38bb/load
making directory /home/data/km1801_post/proc/os38bb/nav
making directory /home/data/km1801_post/proc/os38bb/quality
making directory /home/data/km1801_post/proc/os38bb/ping
making directory /home/data/km1801_post/proc/os38bb/scan
making directory /home/data/km1801_post/proc/os38bb/stick
making directory /home/data/km1801_post/proc/os38bb/vector
- copying additional files for data type uhdas

- config files for raw processing are in /home/data/km1801_post/proc/os38bb/config
copying config files using this wildcard expansion: /home/data/km1801_post/raw/config/km1801_post*
2018/01/11 20:45:32 - adcptree.py /home/data/km1801_post/proc/os38nb -d uhdas --configpath /home/data/km1801_post/raw/config --cruisename km1801_post
2018/01/11 20:45:32 - found adcp templates at  /usr/local/lib/python2.7/dist-packages/pycurrents/adcp/templates
otherdemo is /usr/local/lib/python2.7/dist-packages/pycurrents/adcp/templates/uhdas_template


** data type is uhdas
making directory /home/data/km1801_post/proc/os38nb/adcpdb
making directory /home/data/km1801_post/proc/os38nb/cal
making directory /home/data/km1801_post/proc/os38nb/cal/watertrk
making directory /home/data/km1801_post/proc/os38nb/cal/botmtrk
making directory /home/data/km1801_post/proc/os38nb/cal/heading
making directory /home/data/km1801_post/proc/os38nb/cal/rotate
making directory /home/data/km1801_post/proc/os38nb/contour
making directory /home/data/km1801_post/proc/os38nb/edit
making directory /home/data/km1801_post/proc/os38nb/grid
making directory /home/data/km1801_post/proc/os38nb/load
making directory /home/data/km1801_post/proc/os38nb/nav
making directory /home/data/km1801_post/proc/os38nb/quality
making directory /home/data/km1801_post/proc/os38nb/ping
making directory /home/data/km1801_post/proc/os38nb/scan
making directory /home/data/km1801_post/proc/os38nb/stick
making directory /home/data/km1801_post/proc/os38nb/vector
- copying additional files for data type uhdas

- config files for raw processing are in /home/data/km1801_post/proc/os38nb/config
copying config files using this wildcard expansion: /home/data/km1801_post/raw/config/km1801_post*
2018/01/11 20:45:33 - Entering buildLoggers
2018/01/11 20:45:33 - device:
2018/01/11 20:45:33 - ttyUSB5
2018/01/11 20:45:33 - -f km -F -m 1 -H 2  -e raw -lE -c -O -I -Z tcp://127.0.0.1:38010
2018/01/11 20:45:33 - Created output directory </home/data/km1801_post/raw/wh300> with mode 775
2018/01/11 20:45:33 - device:
2018/01/11 20:45:33 - ttyUSB5
2018/01/11 20:45:33 - -f km -F -m 1 -H 2  -e raw -lE -c -O -I
2018/01/11 20:45:33 - Created output directory </home/data/km1801_post/raw/os38> with mode 775
2018/01/11 20:45:33 - device:
2018/01/11 20:45:33 - ttyUSB5
2018/01/11 20:45:33 - -f km -F -m 1 -H 2  -e gps -Y2 -c
2018/01/11 20:45:33 - Created output directory </home/data/km1801_post/raw/simrad> with mode 775
2018/01/11 20:45:33 - device:
2018/01/11 20:45:33 - ttyUSB5
2018/01/11 20:45:33 - -f km -F -m 1 -H 2  -e pmv -Y2 -c
2018/01/11 20:45:33 - Created output directory </home/data/km1801_post/raw/posmv> with mode 775
2018/01/11 20:45:33 - device:
2018/01/11 20:45:33 - ttyUSB5
2018/01/11 20:45:33 - -f km -F -m 1 -H 2  -e hdg -Y2 -c -s5
2018/01/11 20:45:33 - Created output directory </home/data/km1801_post/raw/gyro> with mode 775
2018/01/11 20:45:33 - >>>> C_ss enabled <<<<<
2018/01/11 20:45:33 - Leaving buildLoggers
2018/01/11 20:45:33 - Start Cruise
2018/01/11 20:46:15 - enter StartLogging, resume =
2018/01/11 20:46:15 - 0
2018/01/11 20:46:18 - TS?
2018/01/11 20:46:19 - TS18/01/11, 20:46:19
2018/01/11 20:46:19 - CR1
2018/01/11 20:46:19 - CL0
2018/01/11 20:46:19 - WD 111 000 000
2018/01/11 20:46:19 - TE00:00:00.00
2018/01/11 20:46:19 - CF11110
2018/01/11 20:46:19 - EX00000
2018/01/11 20:46:19 - EZ1011101
2018/01/11 20:46:19 - CL0
2018/01/11 20:46:19 - WP1
2018/01/11 20:46:19 - WN70
2018/01/11 20:46:19 - WS200
2018/01/11 20:46:19 - WF200
2018/01/11 20:46:19 - BP0
2018/01/11 20:46:20 - BX2000
2018/01/11 20:46:20 - WB0
2018/01/11 20:46:20 - WV550
2018/01/11 20:46:20 - TP00:00.80
2018/01/11 20:46:20 - B?
2018/01/11 20:46:20 - W?
2018/01/11 20:46:21 - E?
2018/01/11 20:46:22 - C?
2018/01/11 20:46:23 - T?
2018/01/11 20:46:24 - PS0
2018/01/11 20:46:26 - In whbb_check_D_params
2018/01/11 20:46:26 - CF11110
2018/01/11 20:46:31 - TS?
2018/01/11 20:46:31 - TS180111204631
2018/01/11 20:46:31 - CR1
2018/01/11 20:46:31 - WD 111 00 0000
2018/01/11 20:46:31 - ND 111 00 0000
2018/01/11 20:46:31 - EA04500
2018/01/11 20:46:32 - NP1
2018/01/11 20:46:32 - NN75
2018/01/11 20:46:32 - NS2400
2018/01/11 20:46:32 - NF1600
2018/01/11 20:46:32 - WP1
2018/01/11 20:46:32 - WN115
2018/01/11 20:46:32 - WS1200
2018/01/11 20:46:32 - WF1600
2018/01/11 20:46:32 - BP0
2018/01/11 20:46:32 - BX10000
2018/01/11 20:46:32 - TP00:03.00
2018/01/11 20:46:32 - CX0,0
2018/01/11 20:46:32 - B?
2018/01/11 20:46:33 - N?
2018/01/11 20:46:34 - W?
2018/01/11 20:46:35 - E?
2018/01/11 20:46:38 - C?
2018/01/11 20:46:39 - T?
2018/01/11 20:46:40 - PS0
2018/01/11 20:46:41 - In os_check_D_params
2018/01/11 20:46:41 - in os_check_D_params: 111000000
2018/01/11 20:46:41 - in os_check_D_params: 111000000
2018/01/11 20:46:41 - CF11110
2018/01/11 20:46:42 - Entering Loggers.start_logging
2018/01/11 20:46:42 - /usr/local/bin/ser_bin -y 2018 -P ttyUSB7 -b 38400 -d /home/data/km1801_post/raw/wh300 -i /tmp/SerialLogger/inpipe.ttyUSB7 -o /tmp/SerialLogger/outpipe.ttyUSB7  -T 1515703602  -f km -F -m 1 -H 2  -e raw -lE -c -O -I -Z tcp://127.0.0.1:38010 2> /tmp/stderr.ttyUSB7 &
2018/01/11 20:46:42 - /usr/local/bin/ser_bin -y 2018 -P ttyUSB3 -b 38400 -d /home/data/km1801_post/raw/os38 -i /tmp/SerialLogger/inpipe.ttyUSB3 -o /tmp/SerialLogger/outpipe.ttyUSB3  -T 1515703602  -f km -F -m 1 -H 2  -e raw -lE -c -O -I 2> /tmp/stderr.ttyUSB3 &
2018/01/11 20:46:42 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB2 -b 9600 -d /home/data/km1801_post/raw/simrad -i /tmp/SerialLogger/inpipe.ttyUSB2 -o /tmp/SerialLogger/outpipe.ttyUSB2  -T 1515703602   -f km -F -m 1 -H 2  -e gps -Y2 -c '$GPGGA' 2> /tmp/stderr.ttyUSB2 &
2018/01/11 20:46:43 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB0 -b 9600 -d /home/data/km1801_post/raw/posmv -i /tmp/SerialLogger/inpipe.ttyUSB0 -o /tmp/SerialLogger/outpipe.ttyUSB0  -T 1515703602    -f km -F -m 1 -H 2  -e pmv -Y2 -c '$INGGA' '$PASHR' 2> /tmp/stderr.ttyUSB0 &
2018/01/11 20:46:43 - /usr/local/bin/ser_asc -y 2018 -P ttyUSB5 -b 4800 -d /home/data/km1801_post/raw/gyro -i /tmp/SerialLogger/inpipe.ttyUSB5 -o /tmp/SerialLogger/outpipe.ttyUSB5  -T 1515703602   -f km -F -m 1 -H 2  -e hdg -Y2 -c -s5 '$HEHDT' 2> /tmp/stderr.ttyUSB5 &
2018/01/11 20:46:43 - Leaving Loggers.start_logging
2018/01/11 20:46:43 - Updated SVs_present from SVs and wrote cmds
2018/01/11 20:46:43 - 0
2018/01/11 20:46:43 - Updated SVs_present from SVs and wrote cmds
2018/01/11 20:46:43 - 1
2018/01/11 20:46:43 - Running /usr/local/currents/bin/DAS_while_logging.py
2018/01/11 20:46:43 - Exiting StartLogging
2018/01/11 20:46:47 - Entering StopLogging
2018/01/11 20:46:50 - Loggers.check_stop_logging: all log processes ended
2018/01/11 20:46:53 - TS?
2018/01/11 20:46:58 - TS?
2018/01/11 20:46:58 - Removed /home/adcp/flags/DAS.logging
2018/01/11 20:46:58 - Exiting StopLogging
2018/01/11 20:47:06 - Stopping DAS_while_cruise.py
2018/01/11 20:47:06 - mainloop ended