* Sea-Bird SBE 9 Data File:
* FileName = C:\data\ctd\at3905025.hex
* Software Version Seasave V 7.23.2
* Temperature SN = 2265
* Conductivity SN = 2670
* Number of Bytes Per Scan = 40
* Number of Voltage Words = 5
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Mar 07 2018 19:21:23
* NMEA Latitude = 10 59.76 N
* NMEA Longitude = 055 26.85 W
* NMEA UTC (Time) = Mar 07 2018  19:20:06
* Store Lat/Lon Data = Append to Every Scan
* System UTC = Mar 07 2018 19:21:23
# nquan = 19
# nvalues = 7                           
# units = specified
# name 0 = latitude: Latitude [deg]
# name 1 = longitude: Longitude [deg]
# name 2 = t090C: Temperature [ITS-90, deg C]
# name 3 = c0S/m: Conductivity [S/m]
# name 4 = sal00: Salinity, Practical [PSU]
# name 5 = depSM: Depth [salt water, m]
# name 6 = prDM: Pressure, Digiquartz [db]
# name 7 = t190C: Temperature, 2 [ITS-90, deg C]
# name 8 = c1S/m: Conductivity, 2 [S/m]
# name 9 = sal11: Salinity, Practical, 2 [PSU]
# name 10 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/kg]
# name 11 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 12 = par: PAR/Irradiance, Biospherical/Licor
# name 13 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
# name 14 = altM: Altimeter [m]
# name 15 = spar: SPAR/Surface Irradiance
# name 16 = pumps: Pump Status
# name 17 = nbin: number of scans per bin
# name 18 = flag: flag
# span 0 =   10.99599,   10.99601       
# span 1 =  -55.44748,  -55.44747       
# span 2 =    27.0869,    27.0928       
# span 3 =   5.567279,   5.569804       
# span 4 =    35.2900,    35.3078       
# span 5 =      3.925,      6.660       
# span 6 =      3.947,      6.698       
# span 7 =    27.0870,    27.0936       
# span 8 =   5.567987,   5.570304       
# span 9 =    35.2951,    35.3087       
# span 10 =    190.053,    190.578      
# span 11 =     4.3531,     4.3651      
# span 12 = 2.3267e+02, 3.5004e+02      
# span 13 =     0.0317,     0.0680      
# span 14 =      91.46,      98.78      
# span 15 = 1.5815e+03, 1.6054e+03      
# span 16 =          1,          1      
# span 17 =         18,       1537      
# span 18 = 0.0000e+00, 0.0000e+00      
# interval = decibars: 1                
# start_time = Mar 07 2018 19:20:06 [NMEA time, header]
# bad_flag = -9.990e-29
# <Sensors count="15" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>2265</SerialNumber>
#       <CalibrationDate>11-Mar-17</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.33180814e-003</G>
#       <H>6.43843418e-004</H>
#       <I>2.35638501e-005</I>
#       <J>2.22412609e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>2670</SerialNumber>
#       <CalibrationDate>14-Mar-17</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.76668185e+000</G>
#         <H>1.30706976e+000</H>
#         <I>-3.47412812e-004</I>
#         <J>1.01242880e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0749</SerialNumber>
#       <CalibrationDate>08-Apr-14</CalibrationDate>
#       <C1>-4.970438e+004</C1>
#       <C2>-4.005750e-001</C2>
#       <C3>1.365700e-002</C3>
#       <D1>3.669600e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.027760e+001</T1>
#       <T2>-4.522040e-004</T2>
#       <T3>4.002070e-006</T3>
#       <T4>1.971140e-009</T4>
#       <Slope>0.99992397</Slope>
#       <Offset>-1.86008</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.283700e-002</AD590M>
#       <AD590B>-8.706643e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4148</SerialNumber>
#       <CalibrationDate>11-Mar-17</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.37331760e-003</G>
#       <H>6.61226926e-004</H>
#       <I>2.43591904e-005</I>
#       <J>2.05481777e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>2770</SerialNumber>
#       <CalibrationDate>14-Mar-17</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.00880142e+001</G>
#         <H>1.48322515e+000</H>
#         <I>-3.93661281e-003</I>
#         <J>3.52192948e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Free -->
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>0444</SerialNumber>
#       <CalibrationDate>30-Mar-17</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>5.3257e-001</Soc>
#         <offset>-0.4990</offset>
#         <A>-4.6883e-003</A>
#         <B> 2.2572e-004</B>
#         <C>-3.4371e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.0900</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Transmissometer, WET Labs C-Star -->
#     <WET_LabsCStar SensorID="71" >
#       <SerialNumber>CST-854DR</SerialNumber>
#       <CalibrationDate>8Dec16</CalibrationDate>
#       <M>21.7440</M>
#       <B>-1.2610</B>
#       <PathLength>0.250</PathLength>
#     </WET_LabsCStar>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, PAR/Irradiance, Biospherical/Licor -->
#     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
#       <SerialNumber>QSP200L4S-4553</SerialNumber>
#       <CalibrationDate>21Nov2016</CalibrationDate>
#       <M>1.00000000</M>
#       <B>0.00000000</B>
#       <CalibrationConstant>3448000000.00000000</CalibrationConstant>
#       <Multiplier>1.00000000</Multiplier>
#       <Offset>-0.38230000</Offset>
#     </PAR_BiosphericalLicorChelseaSensor>
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Fluorometer, WET Labs ECO-AFL/FL -->
#     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
#       <SerialNumber>FLTURT-964</SerialNumber>
#       <CalibrationDate>2016-Nov-22</CalibrationDate>
#       <ScaleFactor>1.10000000e+001</ScaleFactor>
#       <!-- Dark output -->
#       <Vblank>0.0610</Vblank>
#     </FluoroWetlabECO_AFL_FL_Sensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Turbidity Meter, WET Labs, ECO-NTU -->
#     <TurbidityMeter SensorID="67" >
#       <SerialNumber>FLTURT-964</SerialNumber>
#       <CalibrationDate>2016-Nov-22</CalibrationDate>
#       <ScaleFactor>5.000000</ScaleFactor>
#       <!-- Dark output -->
#       <DarkVoltage>0.058000</DarkVoltage>
#     </TurbidityMeter>
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>PSA916-40852</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>15.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Free -->
#   </sensor>
#   <sensor Channel="14" >
#     <!-- SPAR voltage, Unavailable -->
#   </sensor>
#   <sensor Channel="15" >
#     <!-- SPAR voltage, SPAR/Surface Irradiance -->
#     <SPAR_Sensor SensorID="51" >
#       <SerialNumber>QSR2240-16500</SerialNumber>
#       <CalibrationDate>1 Aug 2017</CalibrationDate>
#       <ConversionFactor>1447.86680000</ConversionFactor>
#       <RatioMultiplier>1.00000000</RatioMultiplier>
#     </SPAR_Sensor>
#   </sensor>
# </Sensors>
# datcnv_date = Nov 14 2018 13:25:33, 7.23.2 [datcnv_vars = 17]
# datcnv_in = Z:\data\r2r\cruise\AT39-05\fileset\129405\data\at3905025.hex Z:\data\r2r\cruise\AT39-05\fileset\129405\data\at3905025.XMLCON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# datcnv_ox_tau_correction = yes
# celltm_date = Nov 14 2018 13:25:37, 7.23.2
# celltm_in = Z:\data\local\cruise\AT39-05\products\r2rctd\at3905025.cnv
# celltm_alpha = 0.0300, 0.0300
# celltm_tau = 7.0000, 7.0000
# celltm_temp_sensor_use_for_cond = primary, secondary
# binavg_date = Nov 14 2018 13:25:39, 7.23.2
# binavg_in = Z:\data\local\cruise\AT39-05\products\r2rctd\at3905025.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
   10.99599  -55.44747    27.0869   5.567279    35.2918      3.925      3.947    27.0870   5.567987    35.2969    190.226     4.3570 3.5004e+02     0.0518      97.67 1.6054e+03          1        615 0.0000e+00
   10.99599  -55.44747    27.0908   5.567476    35.2900      4.878      4.906    27.0905   5.568159    35.2951    190.262     4.3578 2.3267e+02     0.0521      98.78 1.5997e+03          1        441 0.0000e+00
   10.99600  -55.44747    27.0916   5.568885    35.2992      5.816      5.849    27.0919   5.569656    35.3045    190.312     4.3590 2.5730e+02     0.0505      97.72 1.5920e+03          1       1537 0.0000e+00
   10.99600  -55.44747    27.0887   5.569804    35.3078      6.660      6.698    27.0936   5.570235    35.3070    190.053     4.3531 3.1861e+02     0.0519      98.78 1.5815e+03          1         39 0.0000e+00
   10.99600  -55.44747    27.0928   5.569491    35.3026      6.015      6.050    27.0927   5.570304    35.3084    190.294     4.3586 2.7075e+02     0.0317      97.47 1.5831e+03          1         22 0.0000e+00
   10.99600  -55.44748    27.0919   5.569456    35.3033      4.930      4.958    27.0923   5.570246    35.3087    190.578     4.3651 2.4322e+02     0.0453      91.46 1.5905e+03          1         18 0.0000e+00
   10.99601  -55.44748    27.0920   5.569354    35.3027      4.252      4.276    27.0924   5.570158    35.3082    190.114     4.3545 3.2531e+02     0.0680      98.78 1.6007e+03          1         43 0.0000e+00