* Sea-Bird SBE 9 Data File:
* FileName = O:\CTD_Data\SBE-9\Raw_Data\OT-18-03\060.hdr
* Software Version Seasave V 7.23.2
* Temperature SN = 4111
* Conductivity SN = 0693
* Number of Bytes Per Scan = 37
* Number of Voltage Words = 4
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Jul 02 2018 22:57:04
* NMEA Latitude = 29 21.85 N
* NMEA Longitude = 093 53.07 W
* NMEA UTC (Time) = Jul 03 2018 03:57:02
* Store Lat/Lon Data = Append to Every Scan
** Ship: OREGON II
** Cruise: 0328
** Station: 060
** Cast: 01
** Latitude: 29 21.85 N
** Longitude: 093 53.06 W
** SEAMAP Station Number: W1706
** Operator Initials: AFM
** Depth (meters): 12.9
* System UTC = Jul 03 2018 03:57:04
# nquan = 11
# nvalues = 10                          
# units = specified
# name 0 = t090C: Temperature [ITS-90, deg C]
# name 1 = wetStar: Fluorescence, WET Labs WETstar [mg/m^3]
# name 2 = CStarTr0: Beam Transmission, WET Labs C-Star [%]
# name 3 = svCM: Sound Velocity [Chen-Millero, m/s]
# name 4 = sbeox0Mg/L: Oxygen, SBE 43 [mg/l]
# name 5 = sbeox0PS: Oxygen, SBE 43 [% saturation]
# name 6 = depSM: Depth [salt water, m]
# name 7 = sal00: Salinity, Practical [PSU]
# name 8 = density00: Density [density, kg/m^3]
# name 9 = nbin: Scans Per Bin
# name 10 = flag:
# span 0 =    29.6754,    30.2339       
# span 1 =     0.8417,     1.1677       
# span 2 =    79.2038,    84.6937       
# span 3 =    1540.32,    1541.43       
# span 4 =     6.0953,     6.4073       
# span 5 =     94.798,    100.534       
# span 6 =      3.000,     12.000       
# span 7 =    30.3714,    30.3958       
# span 8 =  1018.1974,  1018.4353       
# span 9 =         50,        129       
# span 10 = 0.0000e+00, 0.0000e+00      
# interval = meters: 1                  
# start_time = Jul 02 2018 22:57:04 [System UpLoad Time]
# bad_flag = -9.990e-29
# <Sensors count="13" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4111</SerialNumber>
#       <CalibrationDate>30-Jan-18</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.39651434e-003</G>
#       <H>6.48768317e-004</H>
#       <I>2.30855068e-005</I>
#       <J>2.00231982e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>0693</SerialNumber>
#       <CalibrationDate>23-Feb-18</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-3.91567465e+000</G>
#         <H>4.13002208e-001</H>
#         <I>1.11785136e-004</I>
#         <J>1.24994316e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0649</SerialNumber>
#       <CalibrationDate>22-Feb-18</CalibrationDate>
#       <C1>-4.075991e+004</C1>
#       <C2>-3.312330e-001</C2>
#       <C3>1.037370e-002</C3>
#       <D1>3.094500e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.022189e+001</T1>
#       <T2>-3.862995e-004</T2>
#       <T3>2.732010e-006</T3>
#       <T4>6.615850e-009</T4>
#       <Slope>0.99985563</Slope>
#       <Offset>-0.80495</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.285300e-002</AD590M>
#       <AD590B>-9.443060e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4120</SerialNumber>
#       <CalibrationDate>27-Jan-18</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.42585660e-003</G>
#       <H>6.45900919e-004</H>
#       <I>2.28765097e-005</I>
#       <J>1.99862834e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>3786</SerialNumber>
#       <CalibrationDate>30-Jan-18</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.84706740e+000</G>
#         <H>1.48080614e+000</H>
#         <I>-1.53557927e-003</I>
#         <J>2.15879693e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>0089</SerialNumber>
#       <CalibrationDate>17-Feb-18</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>4.2741e-001</Soc>
#         <offset>-0.4941</offset>
#         <A>-4.0386e-003</A>
#         <B> 1.8489e-004</B>
#         <C>-2.4617e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.0800</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Free -->
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Oxygen, SBE 43, 2 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>0118</SerialNumber>
#       <CalibrationDate>17-Feb-18</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>4.8093e-001</Soc>
#         <offset>-0.5094</offset>
#         <A>-3.4801e-003</A>
#         <B> 1.5349e-004</B>
#         <C>-2.0605e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.0800</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>PSA-916 SN06578</SerialNumber>
#       <CalibrationDate>07JUN2018</CalibrationDate>
#       <ScaleFactor>14.805</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Free -->
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Fluorometer, WET Labs WETstar -->
#     <FluoroWetlabWetstarSensor SensorID="21" >
#       <SerialNumber>WS3S-737P</SerialNumber>
#       <CalibrationDate>3 JAN 2018</CalibrationDate>
#       <ScaleFactor>15.200</ScaleFactor>
#       <!-- Blank output -->
#       <Vblank>0.064</Vblank>
#     </FluoroWetlabWetstarSensor>
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Transmissometer, WET Labs C-Star -->
#     <WET_LabsCStar SensorID="71" >
#       <SerialNumber>CST-427PR</SerialNumber>
#       <CalibrationDate>15 FEB 2018</CalibrationDate>
#       <M>21.7525</M>
#       <B>-1.2749</B>
#       <PathLength>25.000</PathLength>
#     </WET_LabsCStar>
#   </sensor>
# </Sensors>
# datcnv_date = Jul 03 2018 07:15:39, 7.23.2 [datcnv_vars = 13]
# datcnv_in = Z:\OT1803\060.hex Z:\OT1803\060.XMLCON
# datcnv_skipover = 5377
# datcnv_ox_hysteresis_correction = yes
# alignctd_date = Jul 03 2018 07:16:50, 7.23.2
# alignctd_in = Z:\OT1803\060.cnv
# alignctd_adv = c0mS/cm 0.100, c1mS/cm 0.100, sbeox0V 3.000, sbeox1V 3.000, wetStar 3.000, CStarTr0 1.000                                                                                                                           
# filter_date = Jul 03 2018 07:17:06, 7.23.2
# filter_in = Z:\OT1803\060A.cnv
# filter_low_pass_tc_A = 0.030
# filter_low_pass_tc_B = 0.150
# filter_low_pass_A_vars =
# filter_low_pass_B_vars = prDM
# loopedit_date = Jul 03 2018 07:17:46, 7.23.2
# loopedit_in = Z:\OT1803\060AF.cnv
# loopedit_minVelocity = 0.050                                                                                            
# loopedit_surfaceSoak: do not remove                                                                                     
# loopedit_excl_bad_scans = yes
# Derive_date = Jul 03 2018 07:19:00, 7.23.2 [derive_vars = 5]
# Derive_in = Z:\OT1803\060AFL.cnv Z:\OT1803\060.XMLCON
# derive_time_window_docdt = seconds: 2
# derive_ox_tau_correction = yes
# binavg_date = Jul 03 2018 07:19:38, 7.23.2
# binavg_in = Z:\OT1803\060AFLD.cnv
# binavg_bintype = meters
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# strip_date = Jul 03 2018 07:19:52, 7.23.2
# strip_in = Z:\OT1803\060AFLDB.cnv
# file_type = ascii
*END*
    30.2295     0.8892    83.4201    1541.33     6.4009    100.434      3.000    30.3729  1018.1974         69 0.0000e+00
    30.2339     0.8770    83.1317    1541.36     6.3870    100.222      4.000    30.3721  1018.1996         89 0.0000e+00
    30.2312     0.8765    83.0736    1541.37     6.3989    100.405      5.000    30.3718  1018.2046         56 0.0000e+00
    30.2290     0.8667    83.5133    1541.38     6.4019    100.449      6.000    30.3716  1018.2095         72 0.0000e+00
    30.2244     0.8679    83.4302    1541.39     6.4036    100.468      7.000    30.3714  1018.2153         70 0.0000e+00
    30.2272     0.8724    83.6860    1541.41     6.4008    100.428      8.000    30.3715  1018.2187         79 0.0000e+00
    30.2294     0.8738    83.4295    1541.43     6.4073    100.534      9.000    30.3714  1018.2222         62 0.0000e+00
    29.9986     0.8417    84.6937    1540.99     6.2291     97.384     10.000    30.3824  1018.3124         65 0.0000e+00
    29.6754     1.0483    82.0634    1540.32     6.1222     95.217     11.000    30.3958  1018.4353        129 0.0000e+00
    29.6772     1.1677    79.2038    1540.34     6.0953     94.798     12.000    30.3900  1018.4346         50 0.0000e+00