2017-02-25 23:34:33,446 DEBUG root about to write control file parameters to --yearbase 2017 --cruisename SR1704 --configtype python --sonar wh300 --dbname a_sr --datatype uhdas --cfgpath /home/data/SR1704/proc/wh300/config --ens_len 120 #--update_gbin ## python gbins: run by "run_lastensq.py" at sea #offset between transducer and gps, applied in at-sea processing # NOTE : read special instructions to change offsets # diagnostics in cal/watertrk/guess_xducerxy.out # parameters used: --xducer_dx 0 --xducer_dy 0 ## see config/SR1704_proc.py for other settings --skip_avg ## see above --max_search_depth 500 --ping_headcorr --proc_engine python --refuv_smoothwin 3 --incremental --find_pflags --top_plotbin 1 --auto 2017-02-25 23:34:33,447 DEBUG quick_adcp sys.argv = /usr/local/currents/bin/run_quick.py -d wh300 2017-02-25 23:34:33,448 DEBUG quick_setup found cruise_info.hcorr (seapath, sea, 0) 2017-02-25 23:34:33,449 DEBUG quick_setup no heading correction will be used within the ensembles but values are staged in cal/rotate/hcorr.asc 2017-02-25 23:34:33,449 INFO quick_setup fix file is a_sr.gps 2017-02-25 23:34:33,449 INFO quick_setup reflayer: ref_method = refsm 2017-02-25 23:34:33,449 INFO quick_setup reflayer: refuv_source = nav 2017-02-25 23:34:33,449 INFO quick_setup reflayer: refuv_smoothwin = 3 2017-02-25 23:34:33,449 INFO quick_adcp importing numpy version 1.8.2 2017-02-25 23:34:33,461 INFO quick_adcp importing matplotlib version 1.4.3 2017-02-25 23:34:33,623 DEBUG quick_mpl in Q_mpl 2017-02-25 23:34:33,623 INFO quick_adcp ===================================================== 2017-02-25 23:34:33,624 INFO quick_adcp ===================================================== 2017-02-25 23:34:33,624 INFO quick_adcp command line was: /usr/local/currents/bin/run_quick.py -d wh300 2017-02-25 23:34:33,624 INFO quick_adcp cwd is /home/data/SR1704/proc/wh300 about to run these steps: - write_clearflags - scandata - avg_and_load - codaseditsetup - setflags - getnav - lst_hdg - plot_headcorr - navsteps - find_pflags - apply_edit - navsteps - lst_temp - plot_temp - lst_npings - calib - matfiles - adcpsect - refabs - smoothnav - putnav - refplots - find_pflags - codaseditsetup 2017-02-25 23:34:33,624 DEBUG quick_asect extracting matlab files for wh300 2017-02-25 23:34:33,639 DEBUG quick_setup data directory: /home/data/SR1704/raw/wh300 2017-02-25 23:34:33,639 INFO quick_setup found 68 files using wildcard expansion relative to scan directory wildcard string was: "/home/data/SR1704/raw/wh300/*.raw" 2017-02-25 23:34:33,639 DEBUG quick_setup found 68 files from original filelist 2017-02-25 23:34:33,640 DEBUG quick_adcp starting with data files (as seen from scan/ or load/ directory): /home/data/SR1704/raw/wh300/sr2017_050_32671.raw ... 2017-02-25 23:34:33,640 DEBUG quick_adcp Sat Feb 25 23:34:33 2017 running quick_adcp.py as follows: --cntfile /home/data/SR1704/proc/wh300/wh300_qpy.cnt ----- adcpsect variables ------ cbasename contour dbname a_sr dbpath ../adcpdb deeper_boundaries [40, 60, 80, 100, 120] firstdepth 10 gridnum 80 increment 2 loaded_time_range all numbins 128 outdir . pgmin 50 prefix allbins_ proc_yearbase 2017 rl_endbin 20 rl_startbin 2 ss_string separate timegrid 60 vbasename vector ----- quick_adcp.py variables and current values ------ adjust_time 1 auto True badbeam None beamangle 20 bl_half_width 3 btrk_step 1.5 cfgpath /home/data/SR1704/proc/wh300/config cntfile /home/data/SR1704/proc/wh300/wh300_qpy.cnt commands None configtype python cruisename SR1704 data_def vmadcp.def datadir /home/data/SR1704/raw/wh300 datafile_glob *.raw datatype uhdas dbname a_sr dday_bailout None debug False ens_len 120 expert None filelist ['/home/data/SR1704/raw/wh300/sr2017_050_32671.raw', '/home/data/SR1704/raw/wh300/sr2017_050_36000.raw', '/home/data/SR1704/raw/wh300/sr2017_050_43200.raw', '/home/data/SR1704/raw/wh300/sr2017_050_50400.raw', '/home/data/SR1704/raw/wh300/sr2017_050_57600.raw', '/home/data/SR1704/raw/wh300/sr2017_050_64800.raw', '/home/data/SR1704/raw/wh300/sr2017_050_72000.raw', '/home/data/SR1704/raw/wh300/sr2017_050_79200.raw', '/home/data/SR1704/raw/wh300/sr2017_051_00000.raw', '/home/data/SR1704/raw/wh300/sr2017_051_07200.raw', '/home/data/SR1704/raw/wh300/sr2017_051_14400.raw', '/home/data/SR1704/raw/wh300/sr2017_051_21600.raw', '/home/data/SR1704/raw/wh300/sr2017_051_28800.raw', '/home/data/SR1704/raw/wh300/sr2017_051_36000.raw', '/home/data/SR1704/raw/wh300/sr2017_051_43200.raw', '/home/data/SR1704/raw/wh300/sr2017_051_50400.raw', '/home/data/SR1704/raw/wh300/sr2017_051_57600.raw', '/home/data/SR1704/raw/wh300/sr2017_051_64800.raw', '/home/data/SR1704/raw/wh300/sr2017_051_72000.raw', '/home/data/SR1704/raw/wh300/sr2017_051_79200.raw', '/home/data/SR1704/raw/wh300/sr2017_052_00000.raw', '/home/data/SR1704/raw/wh300/sr2017_052_07200.raw', '/home/data/SR1704/raw/wh300/sr2017_052_14400.raw', '/home/data/SR1704/raw/wh300/sr2017_052_21600.raw', '/home/data/SR1704/raw/wh300/sr2017_052_28800.raw', '/home/data/SR1704/raw/wh300/sr2017_052_36000.raw', '/home/data/SR1704/raw/wh300/sr2017_052_43200.raw', '/home/data/SR1704/raw/wh300/sr2017_052_50400.raw', '/home/data/SR1704/raw/wh300/sr2017_052_57600.raw', '/home/data/SR1704/raw/wh300/sr2017_052_64800.raw', '/home/data/SR1704/raw/wh300/sr2017_052_72000.raw', '/home/data/SR1704/raw/wh300/sr2017_052_79200.raw', '/home/data/SR1704/raw/wh300/sr2017_053_00000.raw', '/home/data/SR1704/raw/wh300/sr2017_053_07200.raw', '/home/data/SR1704/raw/wh300/sr2017_053_14400.raw', '/home/data/SR1704/raw/wh300/sr2017_053_21600.raw', '/home/data/SR1704/raw/wh300/sr2017_053_28800.raw', '/home/data/SR1704/raw/wh300/sr2017_053_36000.raw', '/home/data/SR1704/raw/wh300/sr2017_053_43200.raw', '/home/data/SR1704/raw/wh300/sr2017_053_50400.raw', '/home/data/SR1704/raw/wh300/sr2017_053_57600.raw', '/home/data/SR1704/raw/wh300/sr2017_053_64800.raw', '/home/data/SR1704/raw/wh300/sr2017_053_72000.raw', '/home/data/SR1704/raw/wh300/sr2017_053_79200.raw', '/home/data/SR1704/raw/wh300/sr2017_054_00000.raw', '/home/data/SR1704/raw/wh300/sr2017_054_07200.raw', '/home/data/SR1704/raw/wh300/sr2017_054_14400.raw', '/home/data/SR1704/raw/wh300/sr2017_054_21600.raw', '/home/data/SR1704/raw/wh300/sr2017_054_28800.raw', '/home/data/SR1704/raw/wh300/sr2017_054_36000.raw', '/home/data/SR1704/raw/wh300/sr2017_054_43200.raw', '/home/data/SR1704/raw/wh300/sr2017_054_50400.raw', '/home/data/SR1704/raw/wh300/sr2017_054_57600.raw', '/home/data/SR1704/raw/wh300/sr2017_054_64800.raw', '/home/data/SR1704/raw/wh300/sr2017_054_72000.raw', '/home/data/SR1704/raw/wh300/sr2017_054_79200.raw', '/home/data/SR1704/raw/wh300/sr2017_055_00000.raw', '/home/data/SR1704/raw/wh300/sr2017_055_07200.raw', '/home/data/SR1704/raw/wh300/sr2017_055_14400.raw', '/home/data/SR1704/raw/wh300/sr2017_055_21600.raw', '/home/data/SR1704/raw/wh300/sr2017_055_28800.raw', '/home/data/SR1704/raw/wh300/sr2017_055_36000.raw', '/home/data/SR1704/raw/wh300/sr2017_055_43200.raw', '/home/data/SR1704/raw/wh300/sr2017_055_50400.raw', '/home/data/SR1704/raw/wh300/sr2017_055_57600.raw', '/home/data/SR1704/raw/wh300/sr2017_055_64800.raw', '/home/data/SR1704/raw/wh300/sr2017_055_72000.raw', '/home/data/SR1704/raw/wh300/sr2017_055_79200.raw'] filter_hwidth 0.0208 find_pflags True firstdepth 10 fixfile a_sr.gps fixfilexy a_sr.agt frequency 300 hcorr_inst seapath help False incremental True instname wh300 jitter 15 max_BLKprofiles 300 max_search_depth 500 maxrunsecs None min_filter_fraction 0.5 mixed_pings False model wh nosave_editcfg 0 numbins 128 pgmin 50 ping_headcorr True pingpref None pingtype bb printformats png proc_engine python proc_yearbase 2017 py_gbindirbase /home/data/SR1704/gbin ref_method refsm refuv_inputfile a_sr.gps refuv_smoothwin 3 refuv_source nav rl_endbin 20 rl_startbin 2 rotate_amplitude 1 rotate_angle 0 save_lastens 0 skip_avg True sonar wh300 steps2rerun sum_xducer_dx 0 sum_xducer_dy 0 time_angle_base ens_hcorr time_angle_file ens_hcorr.ang timeout_secs 86400 top_plotbin 1 tuv_file refsm_tuv.asc txy_file a_sr.gps ub_type 1920 uhdas_config yearbase = 2017 uhdas_dir = /home/data/SR1704 sonar = wh300 gbin = /home/data/SR1704/gbin gbinsonar = /home/data/SR1704/gbin/wh300 raw = /home/data/SR1704/raw rawsonar = /home/data/SR1704/raw/wh300 rbin = /home/data/SR1704/rbin proc = /home/data/SR1704/proc procsonar = /home/data/SR1704/proc/wh300 other attributes: gbin_params = hdg_inst : gyro hdg_inst_msgs : [('gyro', 'hdg'), ('seapath', 'sea'), ('hydrins', 'hdg')] hdg_msg : hdg pitch_inst : seapath pitch_msg : sea pos_inst : seapath pos_msg : gps roll_inst : seapath roll_msg : sea hcorr = ['seapath', 'sea', 0.0] acc_heading_cutoff = 0.02 update_gbin False vardoc False varvals False wtrk_step 7 xducer_dx 0 xducer_dy 0 yearbase 2017 configured to run the following steps: write_clearflags scandata avg_and_load codaseditsetup setflags getnav lst_hdg plot_headcorr navsteps find_pflags apply_edit navsteps lst_temp plot_temp lst_npings calib matfiles adcpsect refabs smoothnav putnav refplots find_pflags codaseditsetup 2017-02-25 23:34:33,640 INFO quick_adcp --------------------------------------------- 2017-02-25 23:34:33,640 INFO quick_adcp step 1: set up files in "edit" directory 2017-02-25 23:34:33,640 INFO quick_run file exists (edit/clearflags.tmp). not writing 2017-02-25 23:34:33,640 INFO quick_adcp --------------------------------------------- 2017-02-25 23:34:33,640 INFO quick_adcp step 2: scan files for time range 2017-02-25 23:34:33,640 DEBUG quick_npy Starting: scanping 2017-02-25 23:34:33,687 DEBUG quick_npy Ending: scanping 2017-02-25 23:34:33,688 DEBUG quick_subs start_end_time 2017/02/20 09:04:31 to 2017/02/20 09:18:42 2017-02-25 23:34:33,688 DEBUG quick_subs dd0: 50.378137 dd1: 50.387986 2017-02-25 23:34:33,688 INFO quick_adcp looking for database with adcpdb/a_sr*.blk 2017-02-25 23:34:33,689 INFO quick_adcp database found: listing blocks 2017-02-25 23:34:33,689 DEBUG quick_subs removing a_srdir.blk 2017-02-25 23:34:33,689 DEBUG quick_subs about to run mkblkdir 2017-02-25 23:34:33,689 DEBUG quick_subs database still exists; rerunning mkdirblk 2017-02-25 23:34:33,689 DEBUG quick_subs running mkblkdir mkblkdir.tmp 2017-02-25 23:34:33,698 DEBUG quick_subs database passes. 2017-02-25 23:34:33,698 DEBUG quick_subs start_end_time 2017/02/20 09:06:31 to 2017/02/25 23:18:32 2017-02-25 23:34:33,698 DEBUG quick_subs dd0: 50.379525 dd1: 55.971204 2017-02-25 23:34:33,698 DEBUG quick_adcp in quick_adcp.py before load, just looked for database times 2017-02-25 23:34:33,698 DEBUG quick_adcp origdb_time_range is 2017/02/20 09:06:31 to 2017/02/25 23:18:32 2017-02-25 23:34:33,698 DEBUG quick_adcp (50.379525 to 55.971204) 2017-02-25 23:34:33,698 INFO quick_adcp --------------------------------------------- 2017-02-25 23:34:33,699 INFO quick_adcp step 3: generate averaged data... 2017-02-25 23:34:33,699 INFO quick_run file load/ping_editparams.txt exists. not replacing 2017-02-25 23:34:33,699 DEBUG quick_setup starting in /home/data/SR1704/proc/wh300 2017-02-25 23:34:33,699 DEBUG quick_setup executing commands from /home/data/SR1704/proc/wh300/load 2017-02-25 23:34:33,699 DEBUG quick_setup running python command "run_pingavg_npy" 2017-02-25 23:34:33,699 DEBUG quick_npy Starting: pingavg 2017-02-25 23:34:33,700 DEBUG quick_npy xducerxy is [0, 0] 2017-02-25 23:34:33,701 DEBUG quick_npy singleping editing parameters: 2017-02-25 23:34:33,701 DEBUG quick_npy bigtarget_mab_window : 11 2017-02-25 23:34:33,701 DEBUG quick_npy rl_endbin : 20 2017-02-25 23:34:33,701 DEBUG quick_npy max_search_depth : 500 2017-02-25 23:34:33,701 DEBUG quick_npy cor_cutoff : 70 2017-02-25 23:34:33,701 DEBUG quick_npy ampfilt : 40 2017-02-25 23:34:33,701 DEBUG quick_npy bigtarget_lgb_margin : 0.500000 2017-02-25 23:34:33,701 DEBUG quick_npy rl_startbin : 2 2017-02-25 23:34:33,701 DEBUG quick_npy ecutoff : 0.500000 2017-02-25 23:34:33,701 DEBUG quick_npy refavg_valcutoff : 1 2017-02-25 23:34:33,701 DEBUG quick_npy weakprof_percent : 50 2017-02-25 23:34:33,701 DEBUG quick_npy bigtarget_ampthresh : 55 2017-02-25 23:34:33,706 INFO pingavg ---------------- 2017-02-25 23:34:33,706 INFO pingavg sonar is wh300 2017-02-25 23:34:33,706 INFO pingavg Pingavg.run for time range 55.916664 to 55.981062 2017-02-25 23:34:33,706 INFO pingavg transducer offset: xducer_dx = 0.000, xducer_dy = 0.000 2017-02-25 23:34:33,706 INFO pingavg shifted positions applied to *.gpst2 and *.uvship' 2017-02-25 23:34:33,706 INFO pingavg ---------------- 2017-02-25 23:34:33,723 DEBUG pingavg Chunk 1 of 1, 55.916664 to 55.981062 2017-02-25 23:34:33,723 DEBUG pingavg Nothing written 2017-02-25 23:34:33,723 DEBUG quick_npy wrote 0 averages 2017-02-25 23:34:33,724 DEBUG quick_npy Ending: pingavg 2017-02-25 23:34:33,724 INFO quick_adcp --------------------------------------------- 2017-02-25 23:34:33,724 INFO quick_adcp step 4: load averaged data (to database) 2017-02-25 23:34:33,725 DEBUG quick_subs in del_overlapping 2017-02-25 23:34:33,725 DEBUG quick_subs lastblock: 2017-02-25 23:34:33,725 DEBUG quick_subs 14 2017-02-25 23:34:33,725 DEBUG quick_subs lastcmd: 2017-02-25 23:34:33,725 DEBUG quick_subs 14 2017-02-25 23:34:33,725 DEBUG quick_subs delblks: 2017-02-25 23:34:33,725 DEBUG quick_subs [14] 2017-02-25 23:34:33,725 DEBUG quick_subs loadblks: 2017-02-25 23:34:33,725 DEBUG quick_subs [14] 2017-02-25 23:34:33,726 DEBUG quick_subs about to run mkblkdir 2017-02-25 23:34:33,726 DEBUG quick_subs database still exists; rerunning mkdirblk 2017-02-25 23:34:33,726 DEBUG quick_subs running mkblkdir mkblkdir.tmp 2017-02-25 23:34:33,734 DEBUG quick_subs database passes. 2017-02-25 23:34:33,735 DEBUG quick_subs start_end_time 2017/02/20 09:06:31 to 2017/02/25 19:04:32 2017-02-25 23:34:33,735 DEBUG quick_subs dd0: 50.379525 dd1: 55.794815 2017-02-25 23:34:33,735 DEBUG quick_run [14] 2017-02-25 23:34:33,735 DEBUG quick_run cmdlist 2017-02-25 23:34:33,735 DEBUG quick_run ['./ens_blk014.cmd'] 2017-02-25 23:34:33,736 INFO quick_run loaded time range: 2017/02/25 19:06:32 to 2017/02/25 23:32:32 2017-02-25 23:34:33,736 DEBUG quick_setup load/ldcodas.tmp exists 2017-02-25 23:34:33,736 DEBUG quick_setup starting in /home/data/SR1704/proc/wh300 2017-02-25 23:34:33,737 DEBUG quick_setup executing commands from /home/data/SR1704/proc/wh300/load 2017-02-25 23:34:33,737 DEBUG quick_setup running python command "ldcodas" 2017-02-25 23:34:33,737 DEBUG quick_subs filling "thisload" timerange 2017-02-25 23:34:33,737 DEBUG quick_subs in ldcodas 2017-02-25 23:34:33,737 DEBUG quick_subs cmdlist: 2017-02-25 23:34:33,737 DEBUG quick_subs ['./ens_blk014.cmd'] 2017-02-25 23:34:33,737 DEBUG quick_subs DATABASE_NAME: ../adcpdb/a_sr DEFINITION_FILE: vmadcp.def LOG_FILE: load.log YEAR_BASE: 2017 cmd_file_list /* use only if specifying cmd paths, not "@" */ END ./ens_blk014.cmd 2017-02-25 23:34:33,738 DEBUG quick_setup about to run ldcodas ldcodas.tmp 2017-02-25 23:34:33,758 INFO quick_run 15 block files present 2017-02-25 23:34:33,759 DEBUG quick_subs removing a_srdir.blk 2017-02-25 23:34:33,759 DEBUG quick_subs about to run mkblkdir 2017-02-25 23:34:33,759 DEBUG quick_subs database still exists; rerunning mkdirblk 2017-02-25 23:34:33,760 DEBUG quick_subs running mkblkdir mkblkdir.tmp 2017-02-25 23:34:33,770 DEBUG quick_subs database passes. 2017-02-25 23:34:33,770 DEBUG quick_subs start_end_time 2017/02/20 09:06:31 to 2017/02/25 23:32:32 2017-02-25 23:34:33,770 DEBUG quick_subs dd0: 50.379525 dd1: 55.980926 2017-02-25 23:34:33,771 INFO quick_adcp database time range: 2017-02-25 23:34:33,771 INFO quick_adcp 2017/02/20 09:06:31 to 2017/02/25 23:32:32 2017-02-25 23:34:33,771 INFO quick_adcp (50.379525 to 55.980926) 2017-02-25 23:34:33,771 DEBUG quick_setup starting in /home/data/SR1704/proc/wh300 2017-02-25 23:34:33,771 DEBUG quick_setup executing commands from /home/data/SR1704/proc/wh300/adcpdb 2017-02-25 23:34:33,771 DEBUG quick_setup running python command "lst_conf" 2017-02-25 23:34:33,771 DEBUG quick_subs dbname: a_sr output: a_sr.cnh time_ranges: all 2017-02-25 23:34:33,771 DEBUG quick_setup about to run lst_conf lst_conf.tmp 2017-02-25 23:34:33,796 INFO quick_adcp --------------------------------------------- 2017-02-25 23:34:33,796 INFO quick_adcp step 5: set up files for codas editing (gautoedit.py) 2017-02-25 23:34:33,797 DEBUG quick_run file edit/codas_editparams.txt exists. not replacing 2017-02-25 23:34:33,797 INFO quick_adcp --------------------------------------------- 2017-02-25 23:34:33,797 INFO quick_adcp step 6: run setflags? 2017-02-25 23:34:33,797 DEBUG quick_setup starting in /home/data/SR1704/proc/wh300 2017-02-25 23:34:33,797 DEBUG quick_setup executing commands from /home/data/SR1704/proc/wh300/edit 2017-02-25 23:34:33,797 DEBUG quick_setup running python command "write_setflags" 2017-02-25 23:34:33,797 DEBUG quick_subs dbname: ../adcpdb/a_sr pg_min: 50 set_range_bit time_ranges: all 2017-02-25 23:34:33,797 DEBUG quick_setup about to run setflags setflags.tmp 2017-02-25 23:34:33,838 INFO quick_adcp --------------------------------------------- 2017-02-25 23:34:33,838 INFO quick_adcp step 7: get navigation 2017-02-25 23:34:33,838 DEBUG quick_setup starting in /home/data/SR1704/proc/wh300 2017-02-25 23:34:33,838 DEBUG quick_setup executing commands from /home/data/SR1704/proc/wh300/nav 2017-02-25 23:34:33,838 DEBUG quick_setup running python command "catnav" 2017-02-25 23:34:33,840 INFO quick_subs navigation file nav/a_sr.gps created from load/*.gps2 2017-02-25 23:34:33,841 INFO quick_subs navigation file nav/a_sr.agt created from load/*.gpst2 2017-02-25 23:34:33,843 DEBUG quick_mpl Starting plot: uvship 2017-02-25 23:34:34,267 DEBUG quick_mpl Ending plot: uvship 2017-02-25 23:34:34,267 INFO quick_run plotted uvship 2017-02-25 23:34:34,267 INFO quick_adcp --------------------------------------------- 2017-02-25 23:34:34,267 INFO quick_adcp step 8: list heading 2017-02-25 23:34:34,268 DEBUG quick_setup cal/rotate/lst_hdg.tmp exists 2017-02-25 23:34:34,268 DEBUG quick_setup starting in /home/data/SR1704/proc/wh300 2017-02-25 23:34:34,268 DEBUG quick_setup executing commands from /home/data/SR1704/proc/wh300/cal/rotate 2017-02-25 23:34:34,268 DEBUG quick_setup running python command "lst_hdg" 2017-02-25 23:34:34,268 DEBUG quick_subs dbname: ../../adcpdb/a_sr output: scn.hdg step_size= 1 year_base= 2017 time_ranges: all 2017-02-25 23:34:34,268 DEBUG quick_setup about to run lst_hdg lst_hdg.tmp 2017-02-25 23:34:34,294 INFO quick_run ... headings extracted 2017-02-25 23:34:34,294 INFO quick_adcp --------------------------------------------- 2017-02-25 23:34:34,294 INFO quick_adcp step 9: plot heading correction 2017-02-25 23:34:34,294 DEBUG quick_run hcorr_inst is seapath 2017-02-25 23:34:34,294 DEBUG quick_mpl Starting plot: hcorr 2017-02-25 23:34:34,323 DEBUG quick_mpl found 5.601392 days of data 2017-02-25 23:34:34,323 DEBUG quick_mpl figures with 4 panels per page, 1.000000 days per panel 2017-02-25 23:34:34,323 DEBUG quick_mpl printing 2 pages 2017-02-25 23:34:35,081 DEBUG quick_mpl Ending plot: hcorr 2017-02-25 23:34:35,081 INFO quick_run plots are in cal/rotate/*png 2017-02-25 23:34:35,081 INFO quick_adcp ------------------------- 2017-02-25 23:34:35,081 INFO quick_adcp ---- running navsteps --- 2017-02-25 23:34:35,081 INFO quick_adcp ------------------------- 2017-02-25 23:34:35,081 INFO quick_adcp step 10: nav steps: run adcpsect 2017-02-25 23:34:35,081 INFO quick_adcp navstep 1 2017-02-25 23:34:35,081 DEBUG quick_setup nav/as_nav.tmp exists 2017-02-25 23:34:35,081 DEBUG quick_setup starting in /home/data/SR1704/proc/wh300 2017-02-25 23:34:35,081 DEBUG quick_setup executing commands from /home/data/SR1704/proc/wh300/nav 2017-02-25 23:34:35,081 DEBUG quick_setup running python command "as_nav" 2017-02-25 23:34:35,082 DEBUG quick_subs dbname: ../adcpdb/a_sr output: a_sr step_size: 1 ndepth: 20 time_ranges: separate year_base= 2017 option_list: pg_min= 50 navigation: reference_bins 2 to 20 end statistics: mean units= 0.01 /* cm/s instead of default m/s */ end flag_mask: ALL_BITS end end 2017/02/20 09:06:31 to 2017/02/25 23:32:32 /* the whole time range */ 2017-02-25 23:34:35,082 DEBUG quick_setup about to run adcpsect as_nav.tmp 2017-02-25 23:34:35,137 INFO quick_run ... ran adcpsect for navsteps 2017-02-25 23:34:35,137 INFO quick_adcp ------------------------- 2017-02-25 23:34:35,137 INFO quick_adcp step 11: nav steps: run refabs 2017-02-25 23:34:35,137 INFO quick_adcp navstep 2 2017-02-25 23:34:35,137 DEBUG quick_setup starting in /home/data/SR1704/proc/wh300 2017-02-25 23:34:35,137 DEBUG quick_setup executing commands from /home/data/SR1704/proc/wh300/nav 2017-02-25 23:34:35,137 DEBUG quick_setup running python command "refabs" 2017-02-25 23:34:35,137 DEBUG quick_subs fix_file_type: simple reference_file: a_sr.nav fix_file: a_sr.gps output: a_sr.ref year_base= 2017 ensemble_length= 120 gap_tolerance= 10 2017-02-25 23:34:35,137 DEBUG quick_setup about to run refabs refabs.tmp 2017-02-25 23:34:35,166 INFO quick_run ... ran refabs for navsteps 2017-02-25 23:34:35,166 INFO quick_adcp ------------------------- 2017-02-25 23:34:35,166 INFO quick_adcp step 12: nav steps: run smoothr for plots 2017-02-25 23:34:35,166 INFO quick_adcp navstep 3 2017-02-25 23:34:35,167 DEBUG quick_setup nav/smoothr.tmp exists 2017-02-25 23:34:35,167 DEBUG quick_setup starting in /home/data/SR1704/proc/wh300 2017-02-25 23:34:35,167 DEBUG quick_setup executing commands from /home/data/SR1704/proc/wh300/nav 2017-02-25 23:34:35,167 DEBUG quick_setup running python command "smoothr" 2017-02-25 23:34:35,167 DEBUG quick_subs reference_file: a_sr.nav refabs_output: a_sr.ref output: a_sr.sm filter_hwidth= 0.0208 min_filter_fraction= 0.5 max_gap_ratio= 0.05 max_gap_distance= 50 max_gap_time= 30 /* 0.5 minutes */ ensemble_time= 120 max_speed= 5.0 min_speed= 1.0 iterations= 5 fix_to_dr_limit= 0.00050 2017-02-25 23:34:35,167 DEBUG quick_setup about to run smoothr smoothr.tmp 2017-02-25 23:34:35,318 INFO quick_run ... ran smoothr 2017-02-25 23:34:35,318 INFO quick_adcp ------------------------- 2017-02-25 23:34:35,318 INFO quick_adcp step 13: nav steps: smooth navigation for velocities 2017-02-25 23:34:35,318 INFO quick_adcp navstep 4 2017-02-25 23:34:35,318 INFO quick_run smoothing method for ship speed: refsm 2017-02-25 23:34:35,318 INFO quick_run smoothing window: 3 2017-02-25 23:34:35,318 INFO quick_run ship speed source: nav 2017-02-25 23:34:35,318 DEBUG quick_npy Starting: refsm 2017-02-25 23:34:35,513 DEBUG quick_npy Ending: refsm 2017-02-25 23:34:35,514 INFO quick_run ... shipspeed smoothing step done 2017-02-25 23:34:35,514 INFO quick_adcp ------------------------- 2017-02-25 23:34:35,514 INFO quick_adcp step 14: nav steps: put positions and uvship from refsm into codasdb 2017-02-25 23:34:35,514 INFO quick_adcp navstep 5 2017-02-25 23:34:35,514 DEBUG quick_setup nav/put_txy.tmp exists 2017-02-25 23:34:35,514 DEBUG quick_setup starting in /home/data/SR1704/proc/wh300 2017-02-25 23:34:35,514 DEBUG quick_setup executing commands from /home/data/SR1704/proc/wh300/nav 2017-02-25 23:34:35,514 DEBUG quick_setup running python command "put_txy" 2017-02-25 23:34:35,514 DEBUG quick_subs dbname: ../adcpdb/a_sr position_file: a_sr.gps year_base= 2017 tolerance= 5 2017-02-25 23:34:35,515 DEBUG quick_setup about to run put_txy put_txy.tmp 2017-02-25 23:34:35,548 INFO quick_run ... ran put_txy 2017-02-25 23:34:35,549 DEBUG quick_setup nav/put_tuv.tmp exists 2017-02-25 23:34:35,549 DEBUG quick_setup starting in /home/data/SR1704/proc/wh300 2017-02-25 23:34:35,549 DEBUG quick_setup executing commands from /home/data/SR1704/proc/wh300/nav 2017-02-25 23:34:35,549 DEBUG quick_setup running python command "put_tuv" 2017-02-25 23:34:35,549 DEBUG quick_subs dbname: ../adcpdb/a_sr shipspeed_file: refsm_tuv.asc year_base= 2017 tolerance= 5 2017-02-25 23:34:35,549 DEBUG quick_setup about to run put_tuv put_tuv.tmp 2017-02-25 23:34:35,581 INFO quick_run ... ran put_tuv 2017-02-25 23:34:35,581 DEBUG quick_mpl Starting plot: nav 2017-02-25 23:34:35,930 DEBUG quick_mpl Ending plot: nav 2017-02-25 23:34:35,930 INFO quick_run ... made navigation plot 2017-02-25 23:34:35,930 INFO quick_adcp ------------------------- 2017-02-25 23:34:35,930 INFO quick_adcp step 15: nav steps: make reflayer plots 2017-02-25 23:34:35,930 INFO quick_adcp navstep 6 2017-02-25 23:34:35,930 DEBUG quick_mpl Starting plot: refl 2017-02-25 23:34:36,009 DEBUG quick_mpl found 5.598614 days of data 2017-02-25 23:34:36,009 DEBUG quick_mpl start day is 50.000000 2017-02-25 23:34:36,009 DEBUG quick_mpl figures with 2.000000 days per page 2017-02-25 23:34:36,009 DEBUG quick_mpl printing 3 pages 2017-02-25 23:34:36,009 DEBUG quick_mpl yrange will be [1.000000, 1.000000] 2017-02-25 23:34:36,592 DEBUG quick_mpl Ending plot: refl 2017-02-25 23:34:36,592 INFO quick_run ... made reflayer plots 2017-02-25 23:34:36,592 INFO quick_adcp --------------------------------------------- 2017-02-25 23:34:36,592 INFO quick_adcp step 10: find profile flags 2017-02-25 23:34:36,593 DEBUG quick_setup starting in /home/data/SR1704/proc/wh300 2017-02-25 23:34:36,593 DEBUG quick_setup executing commands from /home/data/SR1704/proc/wh300/edit 2017-02-25 23:34:36,593 DEBUG quick_setup running python command "run_autoedit_npy" 2017-02-25 23:34:36,593 DEBUG quick_npy Starting: autoedit 2017-02-25 23:34:36,759 DEBUG pingedit wrote 97 bad bins to abadbin_tmp.asc 2017-02-25 23:34:36,762 DEBUG pingedit wrote 1 bad profiles to abadprf_tmp.asc 2017-02-25 23:34:36,762 DEBUG quick_npy Ending: autoedit 2017-02-25 23:34:36,763 INFO quick_run ... extracted files using automatic editing 2017-02-25 23:34:36,763 INFO quick_adcp --------------------------------------------- 2017-02-25 23:34:36,763 INFO quick_adcp step 11: apply editing 2017-02-25 23:34:36,763 DEBUG quick_run starting in: /home/data/SR1704/proc/wh300 2017-02-25 23:34:36,763 DEBUG quick_run executing commands from: edit 2017-02-25 23:34:36,764 DEBUG quick_run about to run dbupdate ../adcpdb/a_sr abadprf_tmp.asc 2017-02-25 23:34:36,770 DEBUG quick_run about to run badbin ../adcpdb/a_sr abadbin_tmp.asc 2017-02-25 23:34:36,780 DEBUG quick_subs dbname: ../adcpdb/a_sr pg_min: 50 set_range_bit time_ranges: all 2017-02-25 23:34:36,780 DEBUG quick_run about to run setflags setflags.tmp 2017-02-25 23:34:36,818 DEBUG quick_run changing directories back to /home/data/SR1704/proc/wh300 2017-02-25 23:34:36,819 INFO quick_adcp --------------------------------------------- 2017-02-25 23:34:36,819 INFO quick_adcp step 12: run calibration steps 2017-02-25 23:34:36,819 DEBUG quick_setup cal/botmtrk/lst_btrk.tmp exists 2017-02-25 23:34:36,819 DEBUG quick_setup starting in /home/data/SR1704/proc/wh300 2017-02-25 23:34:36,819 DEBUG quick_setup executing commands from /home/data/SR1704/proc/wh300/cal/botmtrk 2017-02-25 23:34:36,819 DEBUG quick_setup running python command "lst_btrk" 2017-02-25 23:34:36,819 DEBUG quick_subs dbname: ../../adcpdb/a_sr output: a_sr.btm step_size= 1 year_base= 2017 time_ranges: 2017/02/20 09:06:31 to 2017/02/25 23:32:32 /* whole time range */ 2017-02-25 23:34:36,819 DEBUG quick_setup about to run lst_btrk lst_btrk.tmp 2017-02-25 23:34:36,834 DEBUG quick_setup cal/botmtrk/refabsbt.tmp exists 2017-02-25 23:34:36,834 DEBUG quick_setup starting in /home/data/SR1704/proc/wh300 2017-02-25 23:34:36,835 DEBUG quick_setup executing commands from /home/data/SR1704/proc/wh300/cal/botmtrk 2017-02-25 23:34:36,835 DEBUG quick_setup running python command "refabsbt" 2017-02-25 23:34:36,835 DEBUG quick_subs fix_file_type: simple reference_file: a_sr.btm fix_file: ../../nav/a_sr.gps output: a_sr.ref year_base= 2017 ensemble_length= 120 gap_tolerance= 60 2017-02-25 23:34:36,835 DEBUG quick_setup about to run refabsbt refabsbt.tmp 2017-02-25 23:34:36,841 INFO quick_run ...bottom track info in check cal/botmtrk 2017-02-25 23:34:36,841 DEBUG quick_mpl Starting plot: btcal 2017-02-25 23:34:36,842 DEBUG quick_mpl No data in a_sr.btm 2017-02-25 23:34:36,842 DEBUG quick_mpl Returning from Btplot with no output 2017-02-25 23:34:36,842 DEBUG quick_mpl Ending plot: btcal 2017-02-25 23:34:36,842 DEBUG quick_setup nav/as_nav.tmp exists 2017-02-25 23:34:36,842 DEBUG quick_setup starting in /home/data/SR1704/proc/wh300 2017-02-25 23:34:36,842 DEBUG quick_setup executing commands from /home/data/SR1704/proc/wh300/nav 2017-02-25 23:34:36,842 DEBUG quick_setup running python command "as_nav" 2017-02-25 23:34:36,842 DEBUG quick_subs dbname: ../adcpdb/a_sr output: a_sr step_size: 1 ndepth: 20 time_ranges: separate year_base= 2017 option_list: pg_min= 50 navigation: reference_bins 2 to 20 end statistics: mean units= 0.01 /* cm/s instead of default m/s */ end flag_mask: ALL_BITS end end 2017/02/20 09:06:31 to 2017/02/25 23:32:32 /* the whole time range */ 2017-02-25 23:34:36,842 DEBUG quick_setup about to run adcpsect as_nav.tmp 2017-02-25 23:34:36,899 DEBUG quick_setup cal/watertrk/timslip.tmp exists 2017-02-25 23:34:36,899 DEBUG quick_setup starting in /home/data/SR1704/proc/wh300 2017-02-25 23:34:36,899 DEBUG quick_setup executing commands from /home/data/SR1704/proc/wh300/cal/watertrk 2017-02-25 23:34:36,899 DEBUG quick_setup running python command "timslip" 2017-02-25 23:34:36,899 DEBUG quick_subs fix_file_type: simple fix_file: ../../nav/a_sr.gps reference_file: ../../nav/a_sr.nav output_file: a_sr_7.cal year_base= 2017 min_n_fixes= 7 /* 5 7 9 */ n_refs= 7 /* 5 7 9 */ i_ref_l0= 1 i_ref_l1= 2 /* 1 2 3 */ i_ref_r0= 5 /* 4 5 6 */ i_ref_r1= 6 /* 4 6 8 */ up_thresh= 3.0 /* m/s */ down_thresh= 3.0 /* m/s */ turn_speed= 2.0 /* m/s */ turn_thresh= 60 /* degrees */ dtmax= 360 /* seconds, for 300-second ensembles */ tolerance= 5.e-5 /* days, about 5 seconds */ grid: ensemble use_shifted_times? no 2017-02-25 23:34:36,899 DEBUG quick_setup about to run timslip timslip.tmp 2017-02-25 23:34:36,915 INFO quick_run ... watertrack info in cal/watertrk 2017-02-25 23:34:36,915 DEBUG quick_mpl Starting plot: wtcal 2017-02-25 23:34:36,916 DEBUG quick_mpl Found 34 calibration points 2017-02-25 23:34:37,671 DEBUG quick_mpl Ending plot: wtcal 2017-02-25 23:34:37,671 DEBUG quick_setup starting in /home/data/SR1704/proc/wh300 2017-02-25 23:34:37,671 DEBUG quick_setup executing commands from /home/data/SR1704/proc/wh300/cal/watertrk 2017-02-25 23:34:37,671 DEBUG quick_setup running python command "run_guess_xducerxy_npy" 2017-02-25 23:34:37,671 DEBUG quick_npy Starting: guess_xducerxy 2017-02-25 23:34:37,803 DEBUG quick_npy Ending: guess_xducerxy 2017-02-25 23:34:37,803 INFO quick_run ... check cal/watertrk for estimate 2017-02-25 23:34:37,803 INFO quick_adcp --------------------------------------------- 2017-02-25 23:34:37,803 INFO quick_adcp step 13: extract and plot temperature 2017-02-25 23:34:37,803 DEBUG quick_setup starting in /home/data/SR1704/proc/wh300 2017-02-25 23:34:37,803 DEBUG quick_setup executing commands from /home/data/SR1704/proc/wh300/edit 2017-02-25 23:34:37,803 DEBUG quick_setup running python command "lst_temp" 2017-02-25 23:34:37,803 DEBUG quick_subs dbname: ../adcpdb/a_sr output: a_sr.tem step_size= 1 year_base= 2017 time_ranges: all 2017-02-25 23:34:37,803 DEBUG quick_setup about to run lst_temp lst_temp.tmp 2017-02-25 23:34:37,831 DEBUG quick_mpl Starting plot: temp 2017-02-25 23:34:37,857 DEBUG quick_mpl plotting 4034 points 2017-02-25 23:34:38,050 DEBUG quick_mpl Ending plot: temp 2017-02-25 23:34:38,050 INFO quick_run plotted temperature 2017-02-25 23:34:38,050 INFO quick_adcp --------------------------------------------- 2017-02-25 23:34:38,050 INFO quick_adcp step 14: extract and plot number of pings per ensemble 2017-02-25 23:34:38,050 DEBUG quick_setup edit/lst_npings.tmp exists 2017-02-25 23:34:38,050 DEBUG quick_setup starting in /home/data/SR1704/proc/wh300 2017-02-25 23:34:38,050 DEBUG quick_setup executing commands from /home/data/SR1704/proc/wh300/edit 2017-02-25 23:34:38,050 DEBUG quick_setup running python command "lst_npings" 2017-02-25 23:34:38,050 DEBUG quick_subs dbname: ../adcpdb/a_sr output: a_sr_npings.txt step_size= 1 year_base= 2017 time_ranges: all 2017-02-25 23:34:38,050 DEBUG quick_setup about to run lst_npings lst_npings.tmp 2017-02-25 23:34:38,077 DEBUG quick_mpl Starting plot: npings 2017-02-25 23:34:38,101 DEBUG quick_mpl plotting 4034 points 2017-02-25 23:34:38,243 DEBUG quick_mpl Ending plot: npings 2017-02-25 23:34:38,244 INFO quick_run ... plotted number of pings per ensemble 2017-02-25 23:34:38,244 INFO quick_adcp --------------------------------------------- 2017-02-25 23:34:38,244 INFO quick_adcp step 15: extract matlab "allbins" 2017-02-25 23:34:38,244 DEBUG quick_asect step 18: make matlab files for plotting 2017-02-25 23:34:38,244 DEBUG quick_setup starting in /home/data/SR1704/proc/wh300 2017-02-25 23:34:38,244 DEBUG quick_setup executing commands from /home/data/SR1704/proc/wh300/vector 2017-02-25 23:34:38,244 DEBUG quick_setup running python command "timegrid" 2017-02-25 23:34:38,244 DEBUG quick_setup about to run timegrid a_sr.tmp 2017-02-25 23:34:38,250 DEBUG quick_setup starting in /home/data/SR1704/proc/wh300 2017-02-25 23:34:38,251 DEBUG quick_setup executing commands from /home/data/SR1704/proc/wh300/vector 2017-02-25 23:34:38,251 DEBUG quick_setup running python command "as_vect" 2017-02-25 23:34:38,251 DEBUG quick_setup about to run adcpsect as_vect.tmp 2017-02-25 23:34:38,307 DEBUG quick_asect done making vector matfiles 2017-02-25 23:34:38,307 DEBUG quick_setup starting in /home/data/SR1704/proc/wh300 2017-02-25 23:34:38,307 DEBUG quick_setup executing commands from /home/data/SR1704/proc/wh300/contour 2017-02-25 23:34:38,307 DEBUG quick_setup running python command "timegrid" 2017-02-25 23:34:38,307 DEBUG quick_setup about to run timegrid a_sr.tmp 2017-02-25 23:34:38,314 DEBUG quick_setup starting in /home/data/SR1704/proc/wh300 2017-02-25 23:34:38,314 DEBUG quick_setup executing commands from /home/data/SR1704/proc/wh300/contour 2017-02-25 23:34:38,314 DEBUG quick_setup running python command "as_cont" 2017-02-25 23:34:38,314 DEBUG quick_setup about to run adcpsect as_cont.tmp 2017-02-25 23:34:38,392 DEBUG quick_setup starting in /home/data/SR1704/proc/wh300 2017-02-25 23:34:38,392 DEBUG quick_setup executing commands from /home/data/SR1704/proc/wh300/contour 2017-02-25 23:34:38,392 DEBUG quick_setup about to run getmat -qrs -f allbins_ ../adcpdb/a_sr 2017-02-25 23:34:38,589 DEBUG quick_asect done running getmat with "allbins" 2017-02-25 23:34:38,589 INFO quick_adcp --------------------------------------------- 2017-02-25 23:34:38,589 INFO quick_adcp writing "cruise_info.txt" 2017-02-25 23:34:38,591 INFO root copying NOFIG to /home/adcp/www/figures/wh300_hcorr_plot.png 2017-02-25 23:34:38,591 INFO root copying NOFIG to /home/adcp/www/figures/thumbnails/wh300_hcorr_plot_thumb.png 2017-02-25 23:34:38,591 DEBUG root matfile is contour/contour_uv.mat 2017-02-25 23:34:38,592 INFO root copying contour/contour_uv.mat to /home/adcp/www/data/wh300_cont_uv.mat 2017-02-25 23:34:38,592 DEBUG root matfile is vector/vector_uv.mat 2017-02-25 23:34:38,593 INFO root copying vector/vector_uv.mat to /home/adcp/www/data/wh300_vect_uv.mat 2017-02-25 23:34:38,593 DEBUG root matfile is contour/contour_xy.mat 2017-02-25 23:34:38,593 INFO root copying contour/contour_xy.mat to /home/adcp/www/data/wh300_cont_xy.mat 2017-02-25 23:34:38,593 DEBUG root matfile is vector/vector_xy.mat 2017-02-25 23:34:38,593 INFO root copying vector/vector_xy.mat to /home/adcp/www/data/wh300_vect_xy.mat 2017-02-25 23:34:38,593 DEBUG root about to copy file edit/a_sr.tem to /home/adcp/www/data/wh300_temp.asc 2017-02-25 23:34:38,594 INFO root copying edit/a_sr.tem to /home/adcp/www/data/wh300_temp.asc 2017-02-25 23:34:38,981 DEBUG root about to copy netcdf file /home/data/SR1704/proc/wh300/contour/wh300.nc to /home/adcp/www/data/wh300.nc 2017-02-25 23:34:38,985 INFO root copying edit/a_sr.tem to /home/adcp/www/data/wh300.nc 2017-02-25 23:34:39,101 INFO root made compressed nc file /home/adcp/uhdas_tmp/wh300_compr.nc in /home/adcp/uhdas_tmp 2017-02-25 23:34:39,149 INFO root generating pingstats for wh300 2017-02-25 23:34:39,149 INFO root Ending quick_adcp.py