* Sea-Bird SBE 9 Data File:
* FileName = D:\CTD\SKQ201709S\SKQ201709S_ctd034.hex
* Software Version Seasave V 7.26.6.26
* Temperature SN = 2708
* Conductivity SN = 4367
* Number of Bytes Per Scan = 37
* Number of Voltage Words = 4
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Jun 15 2017 18:36:16
* NMEA Latitude = 67 40.23 N
* NMEA Longitude = 168 43.76 W
* NMEA UTC (Time) = Jun 15 2017  18:34:51
* Store Lat/Lon Data = Append to Every Scan
* SBE 11plus V 5.1b
* number of scans to average = 1
* pressure baud rate = 9600
* NMEA baud rate = 4800
* GPIB address = 1
* advance primary conductivity  0.073 seconds
* advance secondary conductivity  0.073 seconds
* S>
** Ship: R/V Sikuliaq
** Station Number: 034
** Station Name: DBO3.8a
** Depth: 50
** Operator: sd
** zoops
* System UTC = Jun 15 2017 18:36:16
# nquan = 18
# nvalues = 8                           
# units = specified
# name 0 = latitude: Latitude [deg]
# name 1 = longitude: Longitude [deg]
# name 2 = t090C: Temperature [ITS-90, deg C]
# name 3 = c0S/m: Conductivity [S/m]
# name 4 = sal00: Salinity, Practical [PSU]
# name 5 = depSM: Depth [salt water, m]
# name 6 = prDM: Pressure, Digiquartz [db]
# name 7 = t190C: Temperature, 2 [ITS-90, deg C]
# name 8 = c1S/m: Conductivity, 2 [S/m]
# name 9 = sal11: Salinity, Practical, 2 [PSU]
# name 10 = par: PAR/Irradiance, Biospherical/Licor
# name 11 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/kg]
# name 12 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 13 = altM: Altimeter [m]
# name 14 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
# name 15 = pumps: Pump Status
# name 16 = nbin: number of scans per bin
# name 17 = flag: flag
# span 0 =   67.67048,   67.67048       
# span 1 = -168.72936, -168.72936       
# span 2 =     2.4495,     2.7897       
# span 3 =   2.943210,   2.971798       
# span 4 =    32.8389,    32.8442       
# span 5 =      3.266,      9.719       
# span 6 =      3.299,      9.817       
# span 7 =     2.4344,     2.7477       
# span 8 =   2.942158,   2.968092       
# span 9 =    32.8377,    32.8439       
# span 10 = 1.4344e+02, 1.5180e+03      
# span 11 =    344.898,    347.975      
# span 12 =     7.9251,     7.9956      
# span 13 =      40.91,      47.31      
# span 14 =     2.3692,     3.0187      
# span 15 =          1,          1      
# span 16 =         60,       4303      
# span 17 = 0.0000e+00, 0.0000e+00      
# interval = decibars: 1                
# start_time = Jun 15 2017 18:34:51 [NMEA time, header]
# bad_flag = -9.990e-29
# <Sensors count="13" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>2708</SerialNumber>
#       <CalibrationDate>28-Sep-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.38105484e-003</G>
#       <H>6.51277066e-004</H>
#       <I>2.44666708e-005</I>
#       <J>2.31835680e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>4367</SerialNumber>
#       <CalibrationDate>06-Jan-17</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.80972120e+000</G>
#         <H>1.39223256e+000</H>
#         <I>-1.00319165e-003</I>
#         <J>1.36546078e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>1213</SerialNumber>
#       <CalibrationDate>13-Nov-14</CalibrationDate>
#       <C1>-4.132681e+004</C1>
#       <C2>-4.458463e-001</C2>
#       <C3>1.331500e-002</C3>
#       <D1>3.488900e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.032126e+001</T1>
#       <T2>-4.098790e-004</T2>
#       <T3>3.967810e-006</T3>
#       <T4>3.643750e-009</T4>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.280410e-002</AD590M>
#       <AD590B>-9.260115e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4551</SerialNumber>
#       <CalibrationDate>28-Sep-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.33685425e-003</G>
#       <H>6.33898751e-004</H>
#       <I>2.01179000e-005</I>
#       <J>1.64256625e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>0638</SerialNumber>
#       <CalibrationDate>28-Sep-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-4.16608158e+000</G>
#         <H>4.43140265e-001</H>
#         <I>-3.75364619e-004</I>
#         <J>4.80276727e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, User Polynomial -->
#     <UserPolynomialSensor SensorID="61" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <SensorName>UVP</SensorName>
#       <A0>0.00000000</A0>
#       <A1>0.00000000</A1>
#       <A2>0.00000000</A2>
#       <A3>0.00000000</A3>
#     </UserPolynomialSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Transmissometer, WET Labs C-Star -->
#     <WET_LabsCStar SensorID="71" >
#       <SerialNumber>1609</SerialNumber>
#       <CalibrationDate>01-Jan-16</CalibrationDate>
#       <M>21.4020</M>
#       <B>-0.0210</B>
#       <PathLength>0.250</PathLength>
#     </WET_LabsCStar>
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, User Polynomial, 2 -->
#     <UserPolynomialSensor SensorID="61" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <SensorName>LISST-Deep</SensorName>
#       <A0>0.00000000</A0>
#       <A1>0.00000000</A1>
#       <A2>0.00000000</A2>
#       <A3>0.00000000</A3>
#     </UserPolynomialSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, User Polynomial, 3 -->
#     <UserPolynomialSensor SensorID="61" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <SensorName>LISST-Deep</SensorName>
#       <A0>0.00000000</A0>
#       <A1>0.00000000</A1>
#       <A2>0.00000000</A2>
#       <A3>0.00000000</A3>
#     </UserPolynomialSensor>
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, PAR/Irradiance, Biospherical/Licor -->
#     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
#       <SerialNumber>4516</SerialNumber>
#       <CalibrationDate>01/17/14</CalibrationDate>
#       <M>1.00000000</M>
#       <B>0.00000000</B>
#       <CalibrationConstant>2832861000.00000000</CalibrationConstant>
#       <Multiplier>1.00000000</Multiplier>
#       <Offset>-0.49178400</Offset>
#     </PAR_BiosphericalLicorChelseaSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>2945 UAF</SerialNumber>
#       <CalibrationDate>09-Nov-16</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>4.5571e-001</Soc>
#         <offset>-0.5000</offset>
#         <A>-2.3178e-003</A>
#         <B> 1.2728e-004</B>
#         <C>-1.6623e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.1600</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>7232.302492</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>15.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Fluorometer, WET Labs ECO-AFL/FL -->
#     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
#       <SerialNumber>3090</SerialNumber>
#       <CalibrationDate>18 Dec 2015</CalibrationDate>
#       <ScaleFactor>2.40000000e+001</ScaleFactor>
#       <!-- Dark output -->
#       <Vblank>0.0130</Vblank>
#     </FluoroWetlabECO_AFL_FL_Sensor>
#   </sensor>
# </Sensors>
# datcnv_date = Oct 05 2018 13:52:24, 7.23.2 [datcnv_vars = 16]
# datcnv_in = Z:\data\r2r\cruise\SKQ201709S\fileset\127093\data\skq201709s_ctd034.hex Z:\data\r2r\cruise\SKQ201709S\fileset\127093\data\skq201709s_ctd034.XMLCON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# datcnv_ox_tau_correction = yes
# celltm_date = Oct 05 2018 13:52:29, 7.23.2
# celltm_in = Z:\data\local\cruise\SKQ201709S\products\r2rctd\skq201709s_ctd034.cnv
# celltm_alpha = 0.0300, 0.0300
# celltm_tau = 7.0000, 7.0000
# celltm_temp_sensor_use_for_cond = primary, secondary
# binavg_date = Oct 05 2018 13:52:32, 7.23.2
# binavg_in = Z:\data\local\cruise\SKQ201709S\products\r2rctd\skq201709s_ctd034.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
   67.67048 -168.72936     2.4887   2.946668    32.8419      9.719      9.817     2.4939   2.947267    32.8439 1.4344e+02    345.798     7.9458      40.91     2.9661          1       4303 0.0000e+00
   67.67048 -168.72936     2.4495   2.943210    32.8389      9.032      9.123     2.4344   2.942158    32.8424 1.8465e+02    344.898     7.9251      41.45     3.0187          1        217 0.0000e+00
   67.67048 -168.72936     2.4935   2.947277    32.8442      7.931      8.012     2.5210   2.949539    32.8424 2.6856e+02    346.452     7.9609      42.56     3.0036          1         63 0.0000e+00
   67.67048 -168.72936     2.5801   2.954248    32.8395      6.959      7.029     2.6166   2.957381    32.8393 3.8531e+02    346.282     7.9568      43.50     2.9954          1         60 0.0000e+00
   67.67048 -168.72936     2.6003   2.955905    32.8400      5.969      6.029     2.6153   2.956977    32.8377 5.5522e+02    346.348     7.9584      44.64     2.6146          1         69 0.0000e+00
   67.67048 -168.72936     2.6229   2.957969    32.8430      4.918      4.968     2.6533   2.960325    32.8401 8.1500e+02    346.557     7.9632      45.68     2.8692          1         61 0.0000e+00
   67.67048 -168.72936     2.6861   2.963032    32.8400      3.854      3.893     2.7041   2.964511    32.8397 1.2141e+03    347.540     7.9857      46.71     2.5984          1         98 0.0000e+00
   67.67048 -168.72936     2.7897   2.971798    32.8414      3.266      3.299     2.7477   2.968092    32.8408 1.5180e+03    347.975     7.9956      47.31     2.3692          1        103 0.0000e+00