* Sea-Bird SBE 9 Data File:
* FileName = D:\CTD\SKQ201709S\SKQ201709S_ctd007.hex
* Software Version Seasave V 7.26.6.26
* Temperature SN = 2708
* Conductivity SN = 4367
* Number of Bytes Per Scan = 37
* Number of Voltage Words = 4
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Jun 10 2017 15:31:09
* NMEA Latitude = 63 17.77 N
* NMEA Longitude = 168 26.96 W
* NMEA UTC (Time) = Jun 10 2017  15:30:11
* Store Lat/Lon Data = Append to Every Scan
* SBE 11plus V 5.1b
* number of scans to average = 1
* pressure baud rate = 9600
* NMEA baud rate = 4800
* GPIB address = 1
* advance primary conductivity  0.073 seconds
* advance secondary conductivity  0.073 seconds
* S>
** Ship: R/V Sikuliaq
** Station Number: 007
** Station Name: CBE1
** Depth: 39.5
** Operator: SD
* System UTC = Jun 10 2017 15:31:09
# nquan = 18
# nvalues = 8                           
# units = specified
# name 0 = latitude: Latitude [deg]
# name 1 = longitude: Longitude [deg]
# name 2 = t090C: Temperature [ITS-90, deg C]
# name 3 = c0S/m: Conductivity [S/m]
# name 4 = sal00: Salinity, Practical [PSU]
# name 5 = depSM: Depth [salt water, m]
# name 6 = prDM: Pressure, Digiquartz [db]
# name 7 = t190C: Temperature, 2 [ITS-90, deg C]
# name 8 = c1S/m: Conductivity, 2 [S/m]
# name 9 = sal11: Salinity, Practical, 2 [PSU]
# name 10 = par: PAR/Irradiance, Biospherical/Licor
# name 11 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/kg]
# name 12 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 13 = altM: Altimeter [m]
# name 14 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
# name 15 = pumps: Pump Status
# name 16 = nbin: number of scans per bin
# name 17 = flag: flag
# span 0 =   63.29624,   63.29625       
# span 1 = -168.44940, -168.44938       
# span 2 =     3.7497,     3.7631       
# span 3 =   2.987968,   2.989724       
# span 4 =    32.0754,    32.0795       
# span 5 =      3.091,      9.775       
# span 6 =      3.121,      9.871       
# span 7 =     3.7496,     3.7630       
# span 8 =   2.988099,   2.989834       
# span 9 =    32.0770,    32.0809       
# span 10 = 8.6056e+00, 6.2780e+01      
# span 11 =    351.399,    352.125      
# span 12 =     8.0688,     8.0855      
# span 13 =      30.40,      37.04      
# span 14 =     3.2648,     3.7978      
# span 15 =          1,          1      
# span 16 =        101,       5509      
# span 17 = 0.0000e+00, 0.0000e+00      
# interval = decibars: 1                
# start_time = Jun 10 2017 15:30:11 [NMEA time, header]
# bad_flag = -9.990e-29
# <Sensors count="13" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>2708</SerialNumber>
#       <CalibrationDate>28-Sep-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.38105484e-003</G>
#       <H>6.51277066e-004</H>
#       <I>2.44666708e-005</I>
#       <J>2.31835680e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>4367</SerialNumber>
#       <CalibrationDate>06-Jan-17</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.80972120e+000</G>
#         <H>1.39223256e+000</H>
#         <I>-1.00319165e-003</I>
#         <J>1.36546078e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>1213</SerialNumber>
#       <CalibrationDate>13-Nov-14</CalibrationDate>
#       <C1>-4.132681e+004</C1>
#       <C2>-4.458463e-001</C2>
#       <C3>1.331500e-002</C3>
#       <D1>3.488900e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.032126e+001</T1>
#       <T2>-4.098790e-004</T2>
#       <T3>3.967810e-006</T3>
#       <T4>3.643750e-009</T4>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.280410e-002</AD590M>
#       <AD590B>-9.260115e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4551</SerialNumber>
#       <CalibrationDate>28-Sep-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.33685425e-003</G>
#       <H>6.33898751e-004</H>
#       <I>2.01179000e-005</I>
#       <J>1.64256625e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>0638</SerialNumber>
#       <CalibrationDate>28-Sep-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-4.16608158e+000</G>
#         <H>4.43140265e-001</H>
#         <I>-3.75364619e-004</I>
#         <J>4.80276727e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, User Polynomial -->
#     <UserPolynomialSensor SensorID="61" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <SensorName>UVP</SensorName>
#       <A0>0.00000000</A0>
#       <A1>0.00000000</A1>
#       <A2>0.00000000</A2>
#       <A3>0.00000000</A3>
#     </UserPolynomialSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Transmissometer, WET Labs C-Star -->
#     <WET_LabsCStar SensorID="71" >
#       <SerialNumber>1609</SerialNumber>
#       <CalibrationDate>01-Jan-16</CalibrationDate>
#       <M>21.4020</M>
#       <B>-0.0210</B>
#       <PathLength>0.250</PathLength>
#     </WET_LabsCStar>
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, User Polynomial, 2 -->
#     <UserPolynomialSensor SensorID="61" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <SensorName>LISST-Deep</SensorName>
#       <A0>0.00000000</A0>
#       <A1>0.00000000</A1>
#       <A2>0.00000000</A2>
#       <A3>0.00000000</A3>
#     </UserPolynomialSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, User Polynomial, 3 -->
#     <UserPolynomialSensor SensorID="61" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <SensorName>LISST-Deep</SensorName>
#       <A0>0.00000000</A0>
#       <A1>0.00000000</A1>
#       <A2>0.00000000</A2>
#       <A3>0.00000000</A3>
#     </UserPolynomialSensor>
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, PAR/Irradiance, Biospherical/Licor -->
#     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
#       <SerialNumber>4516</SerialNumber>
#       <CalibrationDate>01/17/14</CalibrationDate>
#       <M>1.00000000</M>
#       <B>0.00000000</B>
#       <CalibrationConstant>2832861000.00000000</CalibrationConstant>
#       <Multiplier>1.00000000</Multiplier>
#       <Offset>-0.49178400</Offset>
#     </PAR_BiosphericalLicorChelseaSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>2945 UAF</SerialNumber>
#       <CalibrationDate>09-Nov-16</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>4.5571e-001</Soc>
#         <offset>-0.5000</offset>
#         <A>-2.3178e-003</A>
#         <B> 1.2728e-004</B>
#         <C>-1.6623e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.1600</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>7232.302492</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>15.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Fluorometer, WET Labs ECO-AFL/FL -->
#     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
#       <SerialNumber>3090</SerialNumber>
#       <CalibrationDate>18 Dec 2015</CalibrationDate>
#       <ScaleFactor>2.40000000e+001</ScaleFactor>
#       <!-- Dark output -->
#       <Vblank>0.0130</Vblank>
#     </FluoroWetlabECO_AFL_FL_Sensor>
#   </sensor>
# </Sensors>
# datcnv_date = Oct 05 2018 13:46:34, 7.23.2 [datcnv_vars = 16]
# datcnv_in = Z:\data\r2r\cruise\SKQ201709S\fileset\127093\data\skq201709s_ctd007.hex Z:\data\r2r\cruise\SKQ201709S\fileset\127093\data\skq201709s_ctd007.XMLCON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# datcnv_ox_tau_correction = yes
# celltm_date = Oct 05 2018 13:46:40, 7.23.2
# celltm_in = Z:\data\local\cruise\SKQ201709S\products\r2rctd\skq201709s_ctd007.cnv
# celltm_alpha = 0.0300, 0.0300
# celltm_tau = 7.0000, 7.0000
# celltm_temp_sensor_use_for_cond = primary, secondary
# binavg_date = Oct 05 2018 13:46:44, 7.23.2
# binavg_in = Z:\data\local\cruise\SKQ201709S\products\r2rctd\skq201709s_ctd007.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
   63.29625 -168.44938     3.7631   2.989724    32.0795      9.775      9.871     3.7630   2.989834    32.0809 8.6056e+00    351.399     8.0688      30.40     3.7978          1       5509 0.0000e+00
   63.29625 -168.44939     3.7555   2.988913    32.0779      8.926      9.013     3.7555   2.989035    32.0793 1.2504e+01    351.834     8.0788      31.21     3.6352          1        165 0.0000e+00
   63.29625 -168.44940     3.7554   2.988823    32.0774      7.959      8.037     3.7556   2.988986    32.0791 1.6203e+01    351.661     8.0749      32.08     3.7071          1        138 0.0000e+00
   63.29624 -168.44940     3.7536   2.988578    32.0768      7.011      7.080     3.7536   2.988709    32.0783 2.0568e+01    351.874     8.0797      33.29     3.7923          1        101 0.0000e+00
   63.29624 -168.44940     3.7516   2.988325    32.0763      5.936      5.995     3.7511   2.988402    32.0778 2.8077e+01    351.822     8.0786      34.12     3.6696          1        108 0.0000e+00
   63.29624 -168.44940     3.7511   2.988229    32.0761      5.046      5.095     3.7506   2.988306    32.0775 3.5407e+01    351.560     8.0725      35.27     3.5178          1        104 0.0000e+00
   63.29625 -168.44939     3.7500   2.988059    32.0758      3.825      3.863     3.7500   2.988186    32.0773 4.9803e+01    352.125     8.0855      36.42     3.3541          1        141 0.0000e+00
   63.29624 -168.44938     3.7497   2.987968    32.0754      3.091      3.121     3.7496   2.988099    32.0770 6.2780e+01    352.092     8.0848      37.04     3.2648          1        228 0.0000e+00