* Sea-Bird SBE 9 Data File:
* FileName = D:\CTD\SKQ201709S\SKQ201709S_ctd006.hex
* Software Version Seasave V 7.26.6.26
* Temperature SN = 2708
* Conductivity SN = 4367
* Number of Bytes Per Scan = 37
* Number of Voltage Words = 4
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Jun 10 2017 15:10:29
* NMEA Latitude = 63 17.78 N
* NMEA Longitude = 168 26.96 W
* NMEA UTC (Time) = Jun 10 2017  15:09:11
* Store Lat/Lon Data = Append to Every Scan
* SBE 11plus V 5.1b
* number of scans to average = 1
* pressure baud rate = 9600
* NMEA baud rate = 4800
* GPIB address = 1
* advance primary conductivity  0.073 seconds
* advance secondary conductivity  0.073 seconds
* S>
** Ship: R/V Sikuliaq
** Station Number: 006
** Station Name: CBE1
** Depth: 39.5
** Operator: SD
* System UTC = Jun 10 2017 15:10:29
# nquan = 18
# nvalues = 10                          
# units = specified
# name 0 = latitude: Latitude [deg]
# name 1 = longitude: Longitude [deg]
# name 2 = t090C: Temperature [ITS-90, deg C]
# name 3 = c0S/m: Conductivity [S/m]
# name 4 = sal00: Salinity, Practical [PSU]
# name 5 = depSM: Depth [salt water, m]
# name 6 = prDM: Pressure, Digiquartz [db]
# name 7 = t190C: Temperature, 2 [ITS-90, deg C]
# name 8 = c1S/m: Conductivity, 2 [S/m]
# name 9 = sal11: Salinity, Practical, 2 [PSU]
# name 10 = par: PAR/Irradiance, Biospherical/Licor
# name 11 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/kg]
# name 12 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 13 = altM: Altimeter [m]
# name 14 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
# name 15 = pumps: Pump Status
# name 16 = nbin: number of scans per bin
# name 17 = flag: flag
# span 0 =   63.29624,   63.29626       
# span 1 = -168.44939, -168.44938       
# span 2 =     3.6223,     3.6466       
# span 3 =   2.974032,   2.976936       
# span 4 =    32.0343,    32.0419       
# span 5 =      3.169,     10.484       
# span 6 =      3.200,     10.587       
# span 7 =     3.6217,     3.6437       
# span 8 =   2.974145,   2.976555       
# span 9 =    32.0360,    32.0405       
# span 10 = 5.0903e+00, 4.3346e+01      
# span 11 =    350.362,    350.902      
# span 12 =     8.0449,     8.0573      
# span 13 =      30.11,      36.82      
# span 14 =     3.5297,     4.2301      
# span 15 =          1,          1      
# span 16 =          1,       4584      
# span 17 = 0.0000e+00, 0.0000e+00      
# interval = decibars: 1                
# start_time = Jun 10 2017 15:09:11 [NMEA time, header]
# bad_flag = -9.990e-29
# <Sensors count="13" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>2708</SerialNumber>
#       <CalibrationDate>28-Sep-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.38105484e-003</G>
#       <H>6.51277066e-004</H>
#       <I>2.44666708e-005</I>
#       <J>2.31835680e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>4367</SerialNumber>
#       <CalibrationDate>06-Jan-17</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.80972120e+000</G>
#         <H>1.39223256e+000</H>
#         <I>-1.00319165e-003</I>
#         <J>1.36546078e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>1213</SerialNumber>
#       <CalibrationDate>13-Nov-14</CalibrationDate>
#       <C1>-4.132681e+004</C1>
#       <C2>-4.458463e-001</C2>
#       <C3>1.331500e-002</C3>
#       <D1>3.488900e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.032126e+001</T1>
#       <T2>-4.098790e-004</T2>
#       <T3>3.967810e-006</T3>
#       <T4>3.643750e-009</T4>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.280410e-002</AD590M>
#       <AD590B>-9.260115e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4551</SerialNumber>
#       <CalibrationDate>28-Sep-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.33685425e-003</G>
#       <H>6.33898751e-004</H>
#       <I>2.01179000e-005</I>
#       <J>1.64256625e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>0638</SerialNumber>
#       <CalibrationDate>28-Sep-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-4.16608158e+000</G>
#         <H>4.43140265e-001</H>
#         <I>-3.75364619e-004</I>
#         <J>4.80276727e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, User Polynomial -->
#     <UserPolynomialSensor SensorID="61" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <SensorName>UVP</SensorName>
#       <A0>0.00000000</A0>
#       <A1>0.00000000</A1>
#       <A2>0.00000000</A2>
#       <A3>0.00000000</A3>
#     </UserPolynomialSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Transmissometer, WET Labs C-Star -->
#     <WET_LabsCStar SensorID="71" >
#       <SerialNumber>1609</SerialNumber>
#       <CalibrationDate>01-Jan-16</CalibrationDate>
#       <M>21.4020</M>
#       <B>-0.0210</B>
#       <PathLength>0.250</PathLength>
#     </WET_LabsCStar>
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, User Polynomial, 2 -->
#     <UserPolynomialSensor SensorID="61" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <SensorName>LISST-Deep</SensorName>
#       <A0>0.00000000</A0>
#       <A1>0.00000000</A1>
#       <A2>0.00000000</A2>
#       <A3>0.00000000</A3>
#     </UserPolynomialSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, User Polynomial, 3 -->
#     <UserPolynomialSensor SensorID="61" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <SensorName>LISST-Deep</SensorName>
#       <A0>0.00000000</A0>
#       <A1>0.00000000</A1>
#       <A2>0.00000000</A2>
#       <A3>0.00000000</A3>
#     </UserPolynomialSensor>
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, PAR/Irradiance, Biospherical/Licor -->
#     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
#       <SerialNumber>4516</SerialNumber>
#       <CalibrationDate>01/17/14</CalibrationDate>
#       <M>1.00000000</M>
#       <B>0.00000000</B>
#       <CalibrationConstant>2832861000.00000000</CalibrationConstant>
#       <Multiplier>1.00000000</Multiplier>
#       <Offset>-0.49178400</Offset>
#     </PAR_BiosphericalLicorChelseaSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>2945 UAF</SerialNumber>
#       <CalibrationDate>09-Nov-16</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>4.5571e-001</Soc>
#         <offset>-0.5000</offset>
#         <A>-2.3178e-003</A>
#         <B> 1.2728e-004</B>
#         <C>-1.6623e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.1600</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>7232.302492</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>15.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Fluorometer, WET Labs ECO-AFL/FL -->
#     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
#       <SerialNumber>3090</SerialNumber>
#       <CalibrationDate>18 Dec 2015</CalibrationDate>
#       <ScaleFactor>2.40000000e+001</ScaleFactor>
#       <!-- Dark output -->
#       <Vblank>0.0130</Vblank>
#     </FluoroWetlabECO_AFL_FL_Sensor>
#   </sensor>
# </Sensors>
# datcnv_date = Oct 05 2018 14:24:43, 7.23.2 [datcnv_vars = 16]
# datcnv_in = Z:\data\r2r\cruise\SKQ201709S\fileset\127093\data\skq201709s_ctd006.hex Z:\data\r2r\cruise\SKQ201709S\fileset\127093\data\skq201709s_ctd006.XMLCON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# datcnv_ox_tau_correction = yes
# celltm_date = Oct 05 2018 14:24:49, 7.23.2
# celltm_in = Z:\data\local\cruise\SKQ201709S\products\r2rctd\skq201709s_ctd006.cnv
# celltm_alpha = 0.0300, 0.0300
# celltm_tau = 7.0000, 7.0000
# celltm_temp_sensor_use_for_cond = primary, secondary
# binavg_date = Oct 05 2018 14:24:51, 7.23.2
# binavg_in = Z:\data\local\cruise\SKQ201709S\products\r2rctd\skq201709s_ctd006.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
   63.29626 -168.44939     3.6436   2.976207    32.0366     10.130     10.229     3.6437   2.976555    32.0405 5.7552e+00    350.474     8.0474      30.19     4.1135          1        440 0.0000e+00
   63.29626 -168.44938     3.6466   2.976936    32.0419     10.484     10.587     3.6433   2.976524    32.0403 5.0903e+00    350.618     8.0508      30.11     4.2301          1          1 0.0000e+00
   63.29626 -168.44938     3.6381   2.975914    32.0384     10.059     10.157     3.6384   2.976053    32.0397 6.2755e+00    350.802     8.0550      30.17     4.1424          1       4584 0.0000e+00
   63.29625 -168.44938     3.6305   2.975022    32.0359      8.949      9.037     3.6298   2.975081    32.0373 8.5607e+00    350.719     8.0531      31.26     3.8583          1         64 0.0000e+00
   63.29625 -168.44939     3.6269   2.974605    32.0351      7.978      8.056     3.6269   2.974745    32.0368 1.1270e+01    350.902     8.0573      32.17     3.9162          1         90 0.0000e+00
   63.29626 -168.44938     3.6233   2.974208    32.0345      6.891      6.958     3.6217   2.974193    32.0360 1.4795e+01    350.362     8.0449      33.56     3.9388          1         85 0.0000e+00
   63.29624 -168.44938     3.6223   2.974071    32.0343      5.941      5.999     3.6228   2.974253    32.0360 1.8629e+01    350.508     8.0482      34.07     3.7956          1         35 0.0000e+00
   63.29626 -168.44939     3.6228   2.974085    32.0345      4.895      4.943     3.6231   2.974260    32.0362 2.5785e+01    350.807     8.0551      35.45     3.7768          1        113 0.0000e+00
   63.29626 -168.44938     3.6233   2.974101    32.0347      3.946      3.984     3.6235   2.974258    32.0363 3.2346e+01    350.557     8.0494      36.40     3.5297          1         30 0.0000e+00
   63.29626 -168.44939     3.6229   2.974032    32.0346      3.169      3.200     3.6227   2.974145    32.0361 4.3346e+01    350.861     8.0563      36.82     3.8013          1        145 0.0000e+00