* Sea-Bird SBE 9 Data File:
* FileName = D:\CTD\SKQ201704S\SKQ201704S_ctd024a.hex
* Software Version Seasave V 7.26.6.26
* Temperature SN = 2708
* Conductivity SN = 4367
* Number of Bytes Per Scan = 37
* Number of Voltage Words = 4
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Apr 19 2017 13:15:24
* NMEA Latitude = 44 36.87 N
* NMEA Longitude = 124 18.04 W
* NMEA UTC (Time) = Apr 19 2017  13:14:52
* Store Lat/Lon Data = Append to Every Scan
* SBE 11plus V 5.1b
* number of scans to average = 1
* pressure baud rate = 9600
* NMEA baud rate = 4800
* GPIB address = 1
* advance primary conductivity  0.073 seconds
* advance secondary conductivity  0.073 seconds
* S>
** Ship: R/V Sikuliaq
** Station Number: 024
** Station Name: CE02
** Depth: 83
** Operator: mg
** failed to archive re-do
* System UTC = Apr 19 2017 13:15:24
# nquan = 18
# nvalues = 10                          
# units = specified
# name 0 = latitude: Latitude [deg]
# name 1 = longitude: Longitude [deg]
# name 2 = t090C: Temperature [ITS-90, deg C]
# name 3 = c0S/m: Conductivity [S/m]
# name 4 = sal00: Salinity, Practical [PSU]
# name 5 = depSM: Depth [salt water, m]
# name 6 = prDM: Pressure, Digiquartz [db]
# name 7 = t190C: Temperature, 2 [ITS-90, deg C]
# name 8 = c1S/m: Conductivity, 2 [S/m]
# name 9 = sal11: Salinity, Practical, 2 [PSU]
# name 10 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
# name 11 = par: PAR/Irradiance, Biospherical/Licor
# name 12 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/kg]
# name 13 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 14 = altM: Altimeter [m]
# name 15 = pumps: Pump Status
# name 16 = nbin: number of scans per bin
# name 17 = flag: flag
# span 0 =   44.61442,   44.61444       
# span 1 = -124.30062, -124.30060       
# span 2 =    10.9170,    10.9225       
# span 3 =   3.603113,   3.603671       
# span 4 =    32.0755,    32.0825       
# span 5 =      4.211,     11.527       
# span 6 =      4.245,     11.622       
# span 7 =    10.9189,    10.9231       
# span 8 =   3.603245,   3.603817       
# span 9 =    32.0764,    32.0817       
# span 10 =     2.0243,     2.4727      
# span 11 = 1.4976e-01, 8.2962e-01      
# span 12 =    274.613,    275.459      
# span 13 =     6.2997,     6.3191      
# span 14 =      66.09,      77.87      
# span 15 =          1,          1      
# span 16 =         26,        347      
# span 17 = 0.0000e+00, 0.0000e+00      
# interval = decibars: 1                
# start_time = Apr 19 2017 13:14:52 [NMEA time, header]
# bad_flag = -9.990e-29
# <Sensors count="13" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>2708</SerialNumber>
#       <CalibrationDate>28-Sep-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.38105484e-003</G>
#       <H>6.51277066e-004</H>
#       <I>2.44666708e-005</I>
#       <J>2.31835680e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>4367</SerialNumber>
#       <CalibrationDate>06-Jan-17</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.80972120e+000</G>
#         <H>1.39223256e+000</H>
#         <I>-1.00319165e-003</I>
#         <J>1.36546078e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>1213</SerialNumber>
#       <CalibrationDate>13-Nov-14</CalibrationDate>
#       <C1>-4.132681e+004</C1>
#       <C2>-4.458463e-001</C2>
#       <C3>1.331500e-002</C3>
#       <D1>3.488900e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.032126e+001</T1>
#       <T2>-4.098790e-004</T2>
#       <T3>3.967810e-006</T3>
#       <T4>3.643750e-009</T4>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.280410e-002</AD590M>
#       <AD590B>-9.260115e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4551</SerialNumber>
#       <CalibrationDate>28-Sep-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.33685425e-003</G>
#       <H>6.33898751e-004</H>
#       <I>2.01179000e-005</I>
#       <J>1.64256625e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>0638</SerialNumber>
#       <CalibrationDate>28-Sep-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-4.16608158e+000</G>
#         <H>4.43140265e-001</H>
#         <I>-3.75364619e-004</I>
#         <J>4.80276727e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Fluorometer, Seapoint -->
#     <FluoroSeapointSensor SensorID="11" >
#       <SerialNumber>2461</SerialNumber>
#       <CalibrationDate>Feb 18th 2016</CalibrationDate>
#       <!-- The following is an array index, not the actual gain setting. -->
#       <GainSetting>1</GainSetting>
#       <Offset>0.000</Offset>
#     </FluoroSeapointSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Transmissometer, WET Labs C-Star -->
#     <WET_LabsCStar SensorID="71" >
#       <SerialNumber>1609</SerialNumber>
#       <CalibrationDate>01-Jan-16</CalibrationDate>
#       <M>21.4020</M>
#       <B>-0.0210</B>
#       <PathLength>0.250</PathLength>
#     </WET_LabsCStar>
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Fluorometer, WET Labs ECO-AFL/FL -->
#     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
#       <SerialNumber>3090</SerialNumber>
#       <CalibrationDate>18 Dec 2015</CalibrationDate>
#       <ScaleFactor>2.40000000e+001</ScaleFactor>
#       <!-- Dark output -->
#       <Vblank>0.0130</Vblank>
#     </FluoroWetlabECO_AFL_FL_Sensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, PAR/Irradiance, Biospherical/Licor -->
#     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
#       <SerialNumber>4516</SerialNumber>
#       <CalibrationDate>01/17/14</CalibrationDate>
#       <M>1.00000000</M>
#       <B>0.00000000</B>
#       <CalibrationConstant>2832861000.00000000</CalibrationConstant>
#       <Multiplier>1.00000000</Multiplier>
#       <Offset>-0.49178400</Offset>
#     </PAR_BiosphericalLicorChelseaSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>2945 UAF</SerialNumber>
#       <CalibrationDate>09-Nov-16</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>4.5571e-001</Soc>
#         <offset>-0.5000</offset>
#         <A>-2.3178e-003</A>
#         <B> 1.2728e-004</B>
#         <C>-1.6623e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.1600</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>7232.302492</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>15.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Free -->
#   </sensor>
# </Sensors>
# datcnv_date = Aug 23 2018 15:56:47, 7.23.2 [datcnv_vars = 16]
# datcnv_in = Z:\data\r2r\cruise\SKQ201704S\fileset\127972\data\skq201704s_ctd024a.hex Z:\data\r2r\cruise\SKQ201704S\fileset\127972\data\skq201704s_ctd024a.XMLCON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# datcnv_ox_tau_correction = yes
# celltm_date = Aug 23 2018 15:56:50, 7.23.2
# celltm_in = Z:\data\local\cruise\SKQ201704S\products\r2rctd\skq201704s_ctd024a.cnv
# celltm_alpha = 0.0300, 0.0300
# celltm_tau = 7.0000, 7.0000
# celltm_temp_sensor_use_for_cond = primary, secondary
# binavg_date = Aug 23 2018 15:56:52, 7.23.2
# binavg_in = Z:\data\local\cruise\SKQ201704S\products\r2rctd\skq201704s_ctd024a.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
   44.61444 -124.30061    10.9216   3.603598    32.0779     11.007     11.097    10.9224   3.603744    32.0787     2.3609 1.5812e-01    274.965     6.3078      71.70          1        137 0.0000e+00
   44.61444 -124.30061    10.9170   3.603671    32.0825     11.527     11.622    10.9196   3.603817    32.0817     2.4727 1.5853e-01    274.983     6.3082      70.51          1         36 0.0000e+00
   44.61444 -124.30062    10.9188   3.603600    32.0805     10.948     11.037    10.9201   3.603739    32.0807     2.0243 1.4976e-01    274.914     6.3066      66.09          1         33 0.0000e+00
   44.61444 -124.30062    10.9189   3.603520    32.0800      9.875      9.956    10.9189   3.603644    32.0813     2.1394 1.8160e-01    275.459     6.3191      72.86          1         26 0.0000e+00
   44.61444 -124.30061    10.9196   3.603503    32.0796      8.938      9.011    10.9197   3.603632    32.0808     2.2370 2.5360e-01    274.837     6.3049      73.72          1        147 0.0000e+00
   44.61444 -124.30060    10.9198   3.603463    32.0794      8.084      8.150    10.9208   3.603611    32.0799     2.1896 3.0953e-01    274.613     6.2997      74.58          1         98 0.0000e+00
   44.61444 -124.30060    10.9212   3.603439    32.0783      6.966      7.023    10.9221   3.603578    32.0789     2.1040 3.8502e-01    274.700     6.3017      75.32          1         29 0.0000e+00
   44.61444 -124.30061    10.9225   3.603425    32.0774      6.141      6.192    10.9231   3.603582    32.0784     2.2171 4.8173e-01    274.691     6.3015      76.17          1        101 0.0000e+00
   44.61442 -124.30061    10.9222   3.603337    32.0773      5.068      5.110    10.9229   3.603497    32.0782     2.1768 6.2213e-01    274.706     6.3019      77.87          1        118 0.0000e+00
   44.61442 -124.30062    10.9221   3.603113    32.0755      4.211      4.245    10.9226   3.603245    32.0764     2.1422 8.2962e-01    274.673     6.3011      77.44          1        347 0.0000e+00