* Sea-Bird SBE 9 Data File:
* FileName = C:\cruise\current\Cast_33.hex
* Software Version Seasave V 7.23.2
* Temperature SN = 2327
* Conductivity SN = 1538
* Number of Bytes Per Scan = 41
* Number of Voltage Words = 4
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Oct 02 2015 20:06:00
* NMEA Latitude = 46 13.97 N
* NMEA Longitude = 123 52.97 W
* NMEA UTC (Time) = Oct 02 2015  20:06:05
* Store Lat/Lon Data = Append to Every Scan
** Ship:R/V Oceanus
** Station:
** Operator:
** Latitude:
** Longitude:
** Depth (uncorrected)
** Time:
* System UTC = Oct 02 2015 20:06:00
# nquan = 19
# nvalues = 3                           
# units = specified
# name 0 = latitude: Latitude [deg]
# name 1 = longitude: Longitude [deg]
# name 2 = timeS: Time, Elapsed [seconds]
# name 3 = t090C: Temperature [ITS-90, deg C]
# name 4 = c0S/m: Conductivity [S/m]
# name 5 = sal00: Salinity, Practical [PSU]
# name 6 = depSM: Depth [salt water, m]
# name 7 = prDM: Pressure, Digiquartz [db]
# name 8 = t190C: Temperature, 2 [ITS-90, deg C]
# name 9 = c1S/m: Conductivity, 2 [S/m]
# name 10 = sal11: Salinity, Practical, 2 [PSU]
# name 11 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/kg]
# name 12 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 13 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
# name 14 = altM: Altimeter [m]
# name 15 = par: PAR/Irradiance, Biospherical/Licor
# name 16 = pumps: Pump Status
# name 17 = nbin: number of scans per bin
# name 18 = flag: flag
# span 0 =   46.23284,   46.23292       
# span 1 = -123.88288, -123.88277       
# span 2 =     10.000,    539.437       
# span 3 =    12.3972,    12.6524       
# span 4 =   2.864461,   2.972303       
# span 5 =    23.7544,    24.9086       
# span 6 =     16.181,     16.473       
# span 7 =     16.316,     16.611       
# span 8 =    12.3922,    12.6506       
# span 9 =   2.865269,   2.974316       
# span 10 =    23.7629,    24.9306      
# span 11 =    212.000,    215.696      
# span 12 =     4.8357,     4.9155      
# span 13 =     3.3823,     3.5464      
# span 14 =       0.88,       1.49      
# span 15 = 5.8387e-02, 5.8390e-02      
# span 16 =          1,          1      
# span 17 =        149,      15501      
# span 18 = 0.0000e+00, 0.0000e+00      
# interval = decibars: 1                
# start_time = Oct 02 2015 20:06:05 [NMEA time, first data scan]
# bad_flag = -9.990e-29
# <Sensors count="13" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>2327</SerialNumber>
#       <CalibrationDate>04-Feb-15</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.35202199e-003</G>
#       <H>6.43111386e-004</H>
#       <I>2.34640356e-005</I>
#       <J>2.29556338e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>1538</SerialNumber>
#       <CalibrationDate>06-Feb-15</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-3.88590613e+000</G>
#         <H>4.34923887e-001</H>
#         <I>-1.52707268e-004</I>
#         <J>2.77877314e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0256</SerialNumber>
#       <CalibrationDate>09-Sept-13</CalibrationDate>
#       <C1>-4.705724e+004</C1>
#       <C2>-4.431410e-002</C2>
#       <C3>8.991870e-003</C3>
#       <D1>4.427900e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.014264e+001</T1>
#       <T2>-2.990150e-004</T2>
#       <T3>3.699150e-006</T3>
#       <T4>5.702540e-009</T4>
#       <Slope>0.99985000</Slope>
#       <Offset>-1.90570</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.140000e-002</AD590M>
#       <AD590B>-8.242000e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>2329</SerialNumber>
#       <CalibrationDate>03-Feb-15</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.34006261e-003</G>
#       <H>6.41520060e-004</H>
#       <I>2.32999535e-005</I>
#       <J>2.26188711e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>1568</SerialNumber>
#       <CalibrationDate>10-Feb-15</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-4.00646986e+000</G>
#         <H>5.19319007e-001</H>
#         <I>-1.97516056e-004</I>
#         <J>3.36468991e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>0463</SerialNumber>
#       <CalibrationDate>13-Feb-15</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>5.7226e-001</Soc>
#         <offset>-0.5259</offset>
#         <A>-3.6202e-003</A>
#         <B> 1.3286e-004</B>
#         <C>-1.8566e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.3800</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Free -->
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Fluorometer, WET Labs ECO-AFL/FL -->
#     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
#       <SerialNumber>flnturt</SerialNumber>
#       <CalibrationDate>22-July-2013</CalibrationDate>
#       <ScaleFactor>1.00000000e+001</ScaleFactor>
#       <!-- Dark output -->
#       <Vblank>0.0600</Vblank>
#     </FluoroWetlabECO_AFL_FL_Sensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Turbidity Meter, WET Labs, ECO-NTU -->
#     <TurbidityMeter SensorID="67" >
#       <SerialNumber>FLNTURT-2830</SerialNumber>
#       <CalibrationDate>22-JULY-2013</CalibrationDate>
#       <ScaleFactor>6.000000</ScaleFactor>
#       <!-- Dark output -->
#       <DarkVoltage>0.078000</DarkVoltage>
#     </TurbidityMeter>
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>1022</SerialNumber>
#       <CalibrationDate>X</CalibrationDate>
#       <ScaleFactor>14.850</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, PAR/Irradiance, Biospherical/Licor -->
#     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
#       <SerialNumber>70135</SerialNumber>
#       <CalibrationDate>17Feb2015</CalibrationDate>
#       <M>1.00000000</M>
#       <B>0.00000000</B>
#       <CalibrationConstant>17271157168.00000000</CalibrationConstant>
#       <Multiplier>1.00000000</Multiplier>
#       <Offset>0.00000000</Offset>
#     </PAR_BiosphericalLicorChelseaSensor>
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Fluorometer, WET Labs ECO-AFL/FL, 2 -->
#     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
#       <SerialNumber>FLRTD-425</SerialNumber>
#       <CalibrationDate>03/13/2014</CalibrationDate>
#       <ScaleFactor>2.10000000e+001</ScaleFactor>
#       <!-- Dark output -->
#       <Vblank>0.0500</Vblank>
#     </FluoroWetlabECO_AFL_FL_Sensor>
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Fluorometer, WET Labs ECO CDOM -->
#     <FluoroWetlabCDOM_Sensor SensorID="19" >
#       <SerialNumber>FLCDRT-2228</SerialNumber>
#       <CalibrationDate>01/21/2014</CalibrationDate>
#       <ScaleFactor>89.000</ScaleFactor>
#       <!-- Dark output -->
#       <Vblank>0.029</Vblank>
#     </FluoroWetlabCDOM_Sensor>
#   </sensor>
# </Sensors>
# datcnv_date = Jan 05 2018 23:05:41, 7.23.2 [datcnv_vars = 17]
# datcnv_in = Z:\data\r2r\cruise\OC1509B\fileset\123091\data\cast_33.hex Z:\data\r2r\cruise\OC1509B\fileset\123091\data\cast_33.XMLCON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# datcnv_ox_tau_correction = yes
# celltm_date = Jan 05 2018 23:05:44, 7.23.2
# celltm_in = Z:\data\local\cruise\OC1509B\products\r2rctd\cast_33.cnv
# celltm_alpha = 0.0300, 0.0300
# celltm_tau = 7.0000, 7.0000
# celltm_temp_sensor_use_for_cond = primary, secondary
# binavg_date = Jan 05 2018 23:05:47, 7.23.2
# binavg_in = Z:\data\local\cruise\OC1509B\products\r2rctd\cast_33.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
   46.23290 -123.88288     10.000    12.3972   2.972303    24.9086     16.224     16.359    12.3922   2.974316    24.9306    212.000     4.8357     3.5464       0.88 5.8389e-02          1        481 0.0000e+00
   46.23292 -123.88288    211.382    12.4780   2.936356    24.5303     16.473     16.611    12.4791   2.936614    24.5315    214.653     4.8948     3.3823       1.07 5.8390e-02          1        149 0.0000e+00
   46.23284 -123.88277    539.437    12.6524   2.864461    23.7544     16.181     16.316    12.6506   2.865269    23.7629    215.696     4.9155     3.4574       1.49 5.8387e-02          1      15501 0.0000e+00