* Sea-Bird SBE 9 Data File:
* FileName = C:\data\ctd\at32024x.hex
* Software Version Seasave V 7.22.4
* Temperature SN = 2265
* Conductivity SN = 3021
* Number of Bytes Per Scan = 40
* Number of Voltage Words = 5
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Nov 24 2015 07:51:17
* NMEA Latitude = 40 30.56 N
* NMEA Longitude = 040 28.84 W
* NMEA UTC (Time) = Nov 24 2015  07:51:08
* Store Lat/Lon Data = Append to Every Scan
* System UTC = Nov 24 2015 07:51:17
# nquan = 19
# nvalues = 13                          
# units = specified
# name 0 = latitude: Latitude [deg]
# name 1 = longitude: Longitude [deg]
# name 2 = t090C: Temperature [ITS-90, deg C]
# name 3 = c0S/m: Conductivity [S/m]
# name 4 = sal00: Salinity, Practical [PSU]
# name 5 = depSM: Depth [salt water, m]
# name 6 = prDM: Pressure, Digiquartz [db]
# name 7 = t190C: Temperature, 2 [ITS-90, deg C]
# name 8 = c1S/m: Conductivity, 2 [S/m]
# name 9 = sal11: Salinity, Practical, 2 [PSU]
# name 10 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
# name 11 = par: PAR/Irradiance, Biospherical/Licor
# name 12 = altM: Altimeter [m]
# name 13 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/kg]
# name 14 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 15 = spar: SPAR/Surface Irradiance
# name 16 = pumps: Pump Status
# name 17 = nbin: number of scans per bin
# name 18 = flag: flag
# span 0 =   40.50934,   40.50936       
# span 1 =  -40.48066,  -40.48061       
# span 2 =    18.6836,    18.9041       
# span 3 =   4.603203,   4.812567       
# span 4 =    34.3490,    36.1670       
# span 5 =      6.187,     17.956       
# span 6 =      6.235,     18.096       
# span 7 =    18.6795,    18.9043       
# span 8 =   0.011244,   4.807229       
# span 9 =     0.0630,    36.1647       
# span 10 =     0.8193,     0.9259      
# span 11 = 1.0000e-12, 1.0000e-12      
# span 12 =      54.38,      98.75      
# span 13 =    212.211,    438.614      
# span 14 =     4.8751,    10.0639      
# span 15 = 2.4117e+01, 2.4822e+01      
# span 16 =          0,          1      
# span 17 =         33,        140      
# span 18 = 0.0000e+00, 0.0000e+00      
# interval = decibars: 1                
# start_time = Nov 24 2015 07:51:08 [NMEA time, header]
# bad_flag = -9.990e-29
# <Sensors count="15" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>2265</SerialNumber>
#       <CalibrationDate>02-Dec-14</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.33167491e-003</G>
#       <H>6.43525663e-004</H>
#       <I>2.33396894e-005</I>
#       <J>2.17446794e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>3021</SerialNumber>
#       <CalibrationDate>03-Dec-14</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.93397296e+000</G>
#         <H>1.38842335e+000</H>
#         <I>3.94803722e-004</I>
#         <J>4.51829341e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0749</SerialNumber>
#       <CalibrationDate>08-Apr-14</CalibrationDate>
#       <C1>-4.970438e+004</C1>
#       <C2>-4.005750e-001</C2>
#       <C3>1.365700e-002</C3>
#       <D1>3.669600e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.027760e+001</T1>
#       <T2>-4.522040e-004</T2>
#       <T3>4.002070e-006</T3>
#       <T4>1.971140e-009</T4>
#       <Slope>0.99992397</Slope>
#       <Offset>-1.86008</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.283700e-002</AD590M>
#       <AD590B>-8.706643e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>2446</SerialNumber>
#       <CalibrationDate>02-Dec-14</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.37271405e-003</G>
#       <H>6.48749995e-004</H>
#       <I>2.40642496e-005</I>
#       <J>2.25424001e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>3143</SerialNumber>
#       <CalibrationDate>02-Dec-14</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.03095861e+001</G>
#         <H>1.24234870e+000</H>
#         <I>-3.32524927e-005</I>
#         <J>6.21234120e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Fluorometer, WET Labs ECO-AFL/FL -->
#     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
#       <SerialNumber>FLNTURT-1013</SerialNumber>
#       <CalibrationDate>2014-April-25</CalibrationDate>
#       <ScaleFactor>6.00000000e+000</ScaleFactor>
#       <!-- Dark output -->
#       <Vblank>0.0796</Vblank>
#     </FluoroWetlabECO_AFL_FL_Sensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Turbidity Meter, WET Labs, ECO-NTU -->
#     <TurbidityMeter SensorID="67" >
#       <SerialNumber>FLNTURT-1013</SerialNumber>
#       <CalibrationDate>2014-April-25</CalibrationDate>
#       <ScaleFactor>2.000000</ScaleFactor>
#       <!-- Dark output -->
#       <DarkVoltage>0.077582</DarkVoltage>
#     </TurbidityMeter>
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, PAR/Irradiance, Biospherical/Licor -->
#     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
#       <SerialNumber>4550</SerialNumber>
#       <CalibrationDate>05/14/14</CalibrationDate>
#       <M>1.00000000</M>
#       <B>0.00000000</B>
#       <CalibrationConstant>2500000000.00000000</CalibrationConstant>
#       <Multiplier>1.00000000</Multiplier>
#       <Offset>-0.60264283</Offset>
#     </PAR_BiosphericalLicorChelseaSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Transmissometer, WET Labs C-Star -->
#     <WET_LabsCStar SensorID="71" >
#       <SerialNumber>758</SerialNumber>
#       <CalibrationDate>2015_Nov-14</CalibrationDate>
#       <M>21.8693</M>
#       <B>-1.2291</B>
#       <PathLength>0.250</PathLength>
#     </WET_LabsCStar>
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, User Polynomial -->
#     <UserPolynomialSensor SensorID="61" >
#       <SerialNumber>201</SerialNumber>
#       <CalibrationDate>YYYYMMDD</CalibrationDate>
#       <SensorName>UVP5</SensorName>
#       <A0>2.90000000</A0>
#       <A1>200.00000000</A1>
#       <A2>0.00000000</A2>
#       <A3>0.00000000</A3>
#     </UserPolynomialSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Free -->
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>PSA916-40852</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>15.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>1679</SerialNumber>
#       <CalibrationDate>21-Nov-14</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>4.5157e-001</Soc>
#         <offset>-0.4992</offset>
#         <A>-4.1722e-003</A>
#         <B> 1.8952e-004</B>
#         <C>-2.4749e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.1400</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="14" >
#     <!-- SPAR voltage, Unavailable -->
#   </sensor>
#   <sensor Channel="15" >
#     <!-- SPAR voltage, SPAR/Surface Irradiance -->
#     <SPAR_Sensor SensorID="51" >
#       <SerialNumber>16500</SerialNumber>
#       <CalibrationDate>March 28, 2013</CalibrationDate>
#       <ConversionFactor>1641.85000000</ConversionFactor>
#       <RatioMultiplier>1.00000000</RatioMultiplier>
#     </SPAR_Sensor>
#   </sensor>
# </Sensors>
# datcnv_date = Jan 05 2018 16:22:17, 7.23.2 [datcnv_vars = 17]
# datcnv_in = Z:\data\r2r\cruise\AT32\fileset\118847\data\at32024x.hex Z:\data\r2r\cruise\AT32\fileset\118847\data\at32024x.XMLCON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# datcnv_ox_tau_correction = yes
# celltm_date = Jan 05 2018 16:22:19, 7.23.2
# celltm_in = Z:\data\local\cruise\AT32\products\r2rctd\at32024x.cnv
# celltm_alpha = 0.0300, 0.0300
# celltm_tau = 7.0000, 7.0000
# celltm_temp_sensor_use_for_cond = primary, secondary
# binavg_date = Jan 05 2018 16:22:21, 7.23.2
# binavg_in = Z:\data\local\cruise\AT32\products\r2rctd\at32024x.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
   40.50934  -40.48066    18.9038   4.609453    34.4004      6.187      6.235    18.9043   0.011244     0.0630     0.8219 1.0000e-12      75.39    382.808     8.7824 2.4170e+01          0         88 0.0000e+00
   40.50934  -40.48066    18.9041   4.661457    34.8354      6.968      7.023    18.9040   0.016473     0.0909     0.8598 1.0000e-12      71.33    390.991     8.9729 2.4314e+01          0         70 0.0000e+00
   40.50934  -40.48066    18.9018   4.603203    34.3490      7.931      7.993    18.9031   0.022581     0.1235     0.8749 1.0000e-12      95.72    414.272     9.5039 2.4321e+01          0         53 0.0000e+00
   40.50935  -40.48064    18.8948   4.627565    34.5590      8.785      8.854    18.8942   0.015289     0.0845     0.8193 1.0000e-12      83.66    438.614    10.0639 2.4117e+01          0        131 0.0000e+00
   40.50934  -40.48064    18.8930   4.650426    34.7512      9.942     10.020    18.8945   0.019612     0.1076     0.8358 1.0000e-12      59.30    436.067    10.0069 2.4416e+01          0         39 0.0000e+00
   40.50935  -40.48063    18.8844   4.606168    34.3879     11.005     11.091    18.8804   0.015874     0.0878     0.8482 1.0000e-12      81.41    437.216    10.0305 2.4428e+01          0        140 0.0000e+00
   40.50934  -40.48064    18.8904   4.717703    35.3169     11.880     11.973    18.8840   0.067702     0.3939     0.8587 1.0000e-12      54.38    434.549     9.9762 2.4407e+01          0         40 0.0000e+00
   40.50936  -40.48063    18.8637   4.650847    34.7803     13.103     13.206    18.8444   1.488374    10.9771     0.8536 1.0000e-12      85.24    403.458     9.2582 2.4293e+01          0        127 0.0000e+00
   40.50936  -40.48062    18.8311   4.812567    36.1670     13.835     13.942    18.8187   4.805815    36.1211     0.9105 1.0000e-12      84.72    240.574     5.5266 2.4417e+01          1         50 0.0000e+00
   40.50936  -40.48063    18.7985   4.808551    36.1616     14.929     15.045    18.7902   4.807229    36.1577     0.8835 1.0000e-12      96.70    212.211     4.8751 2.4548e+01          1         53 0.0000e+00
   40.50936  -40.48061    18.7570   4.804427    36.1632     15.744     15.867    18.7303   4.801545    36.1625     0.9195 1.0000e-12      86.41    217.554     4.9979 2.4382e+01          1        117 0.0000e+00
   40.50936  -40.48061    18.6836   4.795896    36.1559     16.860     16.991    18.6795   4.793974    36.1428     0.9259 1.0000e-12      98.75    215.208     4.9440 2.4238e+01          1         33 0.0000e+00
   40.50936  -40.48062    18.7291   4.801454    36.1611     17.956     18.096    18.6854   4.797263    36.1647     0.8800 1.0000e-12      98.75    214.765     4.9338 2.4822e+01          1         55 0.0000e+00