LAST CHANGED : 2015/11/01 11:23:38 CRUISE NAME(S) : AT31_C CRUISE DATES : 2015/10/27 14:51:29 to 2015/10/27 15:05:39 SHIP NAME : unspecified PORTS : unspecified CHIEF SCIENTIST : unspecified DATABASE NAME : a_at DATA FILES : at2015_299_53487.raw to at2015_304_36000.raw STATUS : to do done ------ ----------- averaged [ ] loaded [ ] NOTE: heading correction instrument exists NOTE: time-dependent heading corrections staged (cal/rotate/ens_hcorr.ang) --> check if applied using "rotate" check heading correction [ ] calibration [ ] edited [ ] re-check heading correction [ ] check editing [ ] figures [ ] INSTRUMENT : wh300 ACQUISITION : PROGRAM : uhdas PROCESSING: : python LOGGING : PARAMETERS : BT : bottom track mode (on or off) SI : sampling interval or averaging period for ensemble (sec) NB : number of bins BL : bin length (m) TD : transducer depth (m) BK : blanking length (m) HO : heading offset applied by DAS (deg) HB : heading bias (deg) CRPH : compensation for roll-pitch-heading, 1:on, 0:off) yy/mm/dd hh:mm:ss BT SI NB BL TD BK HO HB CRPH 2015/10/27 14:53:28 on 120 70 2 5 2 50.85 0.00 0001 2015/10/28 00:53:26 on 120 70 2 5 2 50.85 0.00 0001 2015/10/28 20:53:28 off 120 70 2 5 2 50.85 0.00 0001 HEADING : PRIMARY : gyro CORRECTION : phins POSITIONS : gps (specify more detail if available) CALIBRATION : original heading alignment: 50.85 additional rotation 0 final transducer angle is: (original transducer angle) - (rotate_angle) original scale factor 1 additional scale factor (none) COMMENTS : gaps in heading correction? scattering layers? bubbles? underway bias? PROCESSOR : I.M. Persistent --- processing parameters ---------- ## (determined from "sonar"): model = wh ## (determined from "sonar"): frequency = 300 ## (determined from "sonar"): pingtype = bb ## (determined from "sonar"): instname = wh300 ## ping_headcorr is False ## hcorr_inst is phins beamangle 20 cruisename AT31_C datatype uhdas fixfile None frequency 300 instname wh300 model wh pingtype bb proc_engine python sonar wh300 yearbase 2015