* Sea-Bird SBE 9 Data File:
* FileName = C:\CTD\NH1410\NH1410_10F_02.hex
* Software Version Seasave V 7.23.1
* Temperature SN = 2166
* Conductivity SN = 2036
* Number of Bytes Per Scan = 44
* Number of Voltage Words = 5
* Number of Scans Averaged by the Deck Unit = 1
* Append System Time to Every Scan
* System UpLoad Time = May 30 2014 01:07:45
* NMEA Latitude = 20 39.65 N
* NMEA Longitude = 107 51.56 W
* NMEA UTC (Time) = May 30 2014 01:09:19
* Store Lat/Lon Data = Append to Every Scan
* SBE 11plus V 5.2
* number of scans to average = 1
* pressure baud rate = 9600
* NMEA baud rate = 4800
* surface PAR voltage added to scan
* A/D offset = 3
* Latitude/Longitude added to scan
* GPIB address = 1
* advance primary conductivity  0.073 seconds
* advance secondary conductivity  0.073 seconds
* autorun on power up is disabled
* S>
** SHIP: RV New Horizon
** Cruise:  NH1410_Stewart
* System UTC = May 30 2014 01:07:45
# nquan = 19
# nvalues = 15                          
# units = specified
# name 0 = latitude: Latitude [deg]
# name 1 = longitude: Longitude [deg]
# name 2 = t090C: Temperature [ITS-90, deg C]
# name 3 = c0S/m: Conductivity [S/m]
# name 4 = sal00: Salinity, Practical [PSU]
# name 5 = depSM: Depth [salt water, m]
# name 6 = prDM: Pressure, Digiquartz [db]
# name 7 = t190C: Temperature, 2 [ITS-90, deg C]
# name 8 = c1S/m: Conductivity, 2 [S/m]
# name 9 = sal11: Salinity, Practical, 2 [PSU]
# name 10 = bat: Beam Attenuation, Chelsea/Seatech [1/m]
# name 11 = xmiss: Beam Transmission, Chelsea/Seatech [%]
# name 12 = altM: Altimeter [m]
# name 13 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/kg]
# name 14 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 15 = spar: SPAR/Surface Irradiance
# name 16 = pumps: Pump Status
# name 17 = nbin: number of scans per bin
# name 18 = flag: flag
# span 0 =   20.66088,   20.66138       
# span 1 = -107.85944, -107.85930       
# span 2 =    29.3077,    29.4175       
# span 3 =   5.174903,   5.722540       
# span 4 =    30.5791,    34.5640       
# span 5 =      0.925,     12.007       
# span 6 =      0.931,     12.081       
# span 7 =    29.0072,    29.4204       
# span 8 =   4.736299,   5.709449       
# span 9 =    28.1557,    34.5639       
# span 10 =     0.1356,     0.1411      
# span 11 =    86.8432,    87.3166      
# span 12 =       9.33,      98.57      
# span 13 =    131.354,    197.649      
# span 14 =     3.0039,     4.5068      
# span 15 = 0.0000e+00, 0.0000e+00      
# span 16 =          0,          1      
# span 17 =         20,        243      
# span 18 = 0.0000e+00, 0.0000e+00      
# interval = decibars: 1                
# start_time = May 30 2014 01:07:45 [System UTC, first data scan.]
# bad_flag = -9.990e-29
# <Sensors count="15" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>2166</SerialNumber>
#       <CalibrationDate>21 Aor. 2014</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.34218020e-003</G>
#       <H>6.44863256e-004</H>
#       <I>2.25309473e-005</I>
#       <J>2.00267122e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>2036</SerialNumber>
#       <CalibrationDate>26 Mar. 2014</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.06523601e+001</G>
#         <H>1.44903242e+000</H>
#         <I>-5.13868980e-003</I>
#         <J>5.72480852e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0796</SerialNumber>
#       <CalibrationDate>07-MAY-2014</CalibrationDate>
#       <C1>-4.967089e+004</C1>
#       <C2>6.751145e-001</C2>
#       <C3>1.432439e-002</C3>
#       <D1>3.867519e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>2.989466e+001</T1>
#       <T2>-1.289100e-004</T2>
#       <T3>3.486441e-006</T3>
#       <T4>1.226865e-008</T4>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.285200e-002</AD590M>
#       <AD590B>-8.714540e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4476</SerialNumber>
#       <CalibrationDate>21 Apr. 2014</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.33192730e-003</G>
#       <H>6.33631014e-004</H>
#       <I>2.01408742e-005</I>
#       <J>1.67838739e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>2112</SerialNumber>
#       <CalibrationDate>26 Mar. 2014</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.01513541e+001</G>
#         <H>1.46877145e+000</H>
#         <I>-2.14360631e-003</I>
#         <J>2.33915908e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Free -->
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Free -->
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Transmissometer, Chelsea/Seatech -->
#     <TransChelseaSeatechWetlabCStarSensor SensorID="59" >
#       <SerialNumber>CST&apos;1176DR</SerialNumber>
#       <CalibrationDate>20 July 2012</CalibrationDate>
#       <M>20.0660</M>
#       <B>-1.2840</B>
#       <PathLength>0.000</PathLength>
#     </TransChelseaSeatechWetlabCStarSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Fluorometer, Seapoint -->
#     <FluoroSeapointSensor SensorID="11" >
#       <SerialNumber>3004</SerialNumber>
#       <CalibrationDate>n/a</CalibrationDate>
#       <!-- The following is an array index, not the actual gain setting. -->
#       <GainSetting>2</GainSetting>
#       <Offset>0.000</Offset>
#     </FluoroSeapointSensor>
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>1182</SerialNumber>
#       <CalibrationDate>n-a</CalibrationDate>
#       <ScaleFactor>15.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Free -->
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>0255</SerialNumber>
#       <CalibrationDate>08 Mar. 2014</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>4.9260e-001</Soc>
#         <offset>-0.5078</offset>
#         <A>-3.9750e-003</A>
#         <B> 2.1468e-004</B>
#         <C>-3.7400e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.3000</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Free -->
#   </sensor>
#   <sensor Channel="14" >
#     <!-- SPAR voltage, Unavailable -->
#   </sensor>
#   <sensor Channel="15" >
#     <!-- SPAR voltage, SPAR/Surface Irradiance -->
#     <SPAR_Sensor SensorID="51" >
#       <SerialNumber>6370</SerialNumber>
#       <CalibrationDate>18 June 2013</CalibrationDate>
#       <ConversionFactor>1528.83000000</ConversionFactor>
#       <RatioMultiplier>1.00000000</RatioMultiplier>
#     </SPAR_Sensor>
#   </sensor>
# </Sensors>
# datcnv_date = Jan 17 2018 05:12:50, 7.23.2 [datcnv_vars = 17]
# datcnv_in = Z:\data\r2r\cruise\NH1410\fileset\116346\data\nh1410_10f_02.hex Z:\data\r2r\cruise\NH1410\fileset\116346\data\nh1410_10f_02.XMLCON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# datcnv_ox_tau_correction = yes
# celltm_date = Jan 17 2018 05:12:53, 7.23.2
# celltm_in = Z:\data\local\cruise\NH1410\products\r2rctd\nh1410_10f_02.cnv
# celltm_alpha = 0.0300, 0.0300
# celltm_tau = 7.0000, 7.0000
# celltm_temp_sensor_use_for_cond = primary, secondary
# binavg_date = Jan 17 2018 05:12:55, 7.23.2
# binavg_in = Z:\data\local\cruise\NH1410\products\r2rctd\nh1410_10f_02.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
   20.66088 -107.85938    29.3609   5.174903    30.5791      0.925      0.931    29.0072   4.736299    28.1557     0.1379    87.1185       9.33    197.649     4.5068 0.0000e+00          0        109 0.0000e+00
   20.66088 -107.85938    29.4127   5.713685    34.1762      1.978      1.990    29.4145   5.673868    34.1418     0.1364    87.2462      98.55    131.354     3.0039 0.0000e+00          0         31 0.0000e+00
   20.66090 -107.85938    29.4121   5.722540    34.4955      2.861      2.878    29.4119   5.709449    34.4972     0.1411    86.8432      95.31    177.768     4.0663 0.0000e+00          1        243 0.0000e+00
   20.66095 -107.85940    29.4151   5.706035    34.5216      3.678      3.701    29.4179   5.704683    34.5208     0.1362    87.2658      83.85    187.475     4.2883 0.0000e+00          1         64 0.0000e+00
   20.66098 -107.85942    29.4157   5.704010    34.5242      5.049      5.080    29.4177   5.704064    34.5238     0.1362    87.2694      98.57    188.132     4.3034 0.0000e+00          1        104 0.0000e+00
   20.66102 -107.85942    29.4167   5.704171    34.5249      5.814      5.850    29.4189   5.704307    34.5246     0.1359    87.2936      84.85    188.633     4.3149 0.0000e+00          1         81 0.0000e+00
   20.66102 -107.85942    29.4169   5.704456    34.5266      6.996      7.040    29.4204   5.704644    34.5256     0.1360    87.2808      98.57    186.880     4.2748 0.0000e+00          1         35 0.0000e+00
   20.66102 -107.85943    29.4175   5.704451    34.5260      7.831      7.879    29.4201   5.704638    34.5256     0.1360    87.2825      98.57    188.032     4.3011 0.0000e+00          1         91 0.0000e+00
   20.66104 -107.85943    29.4036   5.703805    34.5318      8.656      8.709    29.4049   5.703872    34.5315     0.1363    87.2594      98.57    188.344     4.3083 0.0000e+00          1         70 0.0000e+00
   20.66106 -107.85944    29.3638   5.701886    34.5478      9.923      9.985    29.3698   5.702224    34.5458     0.1364    87.2477      98.57    188.357     4.3087 0.0000e+00          1         20 0.0000e+00
   20.66105 -107.85944    29.3593   5.701561    34.5484     10.860     10.928    29.3626   5.701740    34.5472     0.1361    87.2716      93.36    188.499     4.3119 0.0000e+00          1         97 0.0000e+00
   20.66107 -107.85944    29.3077   5.698381    34.5640     12.007     12.081    29.3098   5.698576    34.5639     0.1364    87.2530      91.09    188.390     4.3096 0.0000e+00          1         57 0.0000e+00
   20.66106 -107.85944    29.3683   5.701987    34.5439     10.933     11.001    29.3676   5.702018    34.5447     0.1361    87.2801      98.57    188.298     4.3073 0.0000e+00          1         22 0.0000e+00
   20.66108 -107.85944    29.3656   5.701873    34.5455      9.834      9.895    29.3669   5.701923    34.5449     0.1356    87.3166      98.57    188.986     4.3231 0.0000e+00          1         38 0.0000e+00
   20.66138 -107.85930    29.3564   5.701121    34.5469      9.291      9.348    29.3587   5.701366    34.5469     0.1361    87.2786      95.71    189.262     4.3294 0.0000e+00          1         52 0.0000e+00