* Sea-Bird SBE 9 Data File:
* FileName = D:\CTD\SKQ201511S\SKQ201511S-025.hex
* Software Version Seasave V 7.22.5
* Temperature SN = 6040
* Conductivity SN = 4367
* Number of Bytes Per Scan = 37
* Number of Voltage Words = 4
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Sep 11 2015 06:54:54
* NMEA Latitude = 72 10.67 N
* NMEA Longitude = 148 04.14 W
* NMEA UTC (Time) = Sep 11 2015  06:54:39
* Store Lat/Lon Data = Append to Every Scan
* SBE 11plus V 5.1b
* number of scans to average = 1
* pressure baud rate = 9600
* NMEA baud rate = 4800
* GPIB address = 1
* advance primary conductivity  0.073 seconds
* advance secondary conductivity  0.073 seconds
* S>
** Ship: R/V Sikuliaq
** Station Number: 025
** Station Name: Beluga
** Depth: 3608
** Operator: EHR
** ADCP surface tow.
* System UTC = Sep 11 2015 06:54:54
# nquan = 14
# nvalues = 6                           
# units = specified
# name 0 = latitude: Latitude [deg]
# name 1 = longitude: Longitude [deg]
# name 2 = t090C: Temperature [ITS-90, deg C]
# name 3 = c0S/m: Conductivity [S/m]
# name 4 = sal00: Salinity, Practical [PSU]
# name 5 = depSM: Depth [salt water, m]
# name 6 = prDM: Pressure, Digiquartz [db]
# name 7 = t190C: Temperature, 2 [ITS-90, deg C]
# name 8 = c1S/m: Conductivity, 2 [S/m]
# name 9 = sal11: Salinity, Practical, 2 [PSU]
# name 10 = altM: Altimeter [m]
# name 11 = pumps: Pump Status
# name 12 = nbin: number of scans per bin
# name 13 = flag: flag
# span 0 =   72.16964,   72.17591       
# span 1 = -148.11624, -148.07875       
# span 2 =    -0.9791,    -0.9719       
# span 3 =   2.069982,   2.076298       
# span 4 =    24.9292,    25.0166       
# span 5 =      0.989,      4.762       
# span 6 =      0.999,      4.811       
# span 7 =    -0.9790,    -0.9721       
# span 8 =   2.069775,   2.076006       
# span 9 =    24.9267,    25.0130       
# span 10 =      98.94,      99.49      
# span 11 =          1,          1      
# span 12 =         21,      23160      
# span 13 = 0.0000e+00, 0.0000e+00      
# interval = decibars: 1                
# start_time = Sep 11 2015 06:54:39 [NMEA time, header]
# bad_flag = -9.990e-29
# <Sensors count="13" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>6040</SerialNumber>
#       <CalibrationDate>01-Nov-14</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.33877919e-003</G>
#       <H>6.28160986e-004</H>
#       <I>1.86331848e-005</I>
#       <J>1.15641372e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>4367</SerialNumber>
#       <CalibrationDate>29-Oct-14</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.90546331e+000</G>
#         <H>1.40581354e+000</H>
#         <I>-1.00247251e-003</I>
#         <J>1.39063488e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0533</SerialNumber>
#       <CalibrationDate>12-Mar-13</CalibrationDate>
#       <C1>-4.829347e+004</C1>
#       <C2>-2.633120e-001</C2>
#       <C3>1.442460e-002</C3>
#       <D1>3.981300e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>2.994228e+001</T1>
#       <T2>-3.397543e-004</T2>
#       <T3>4.042180e-006</T3>
#       <T4>2.046070e-009</T4>
#       <Slope>0.99984072</Slope>
#       <Offset>-0.63895</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.289075e-002</AD590M>
#       <AD590B>-8.823864e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>6042</SerialNumber>
#       <CalibrationDate>15-Oct-14</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.34169912e-003</G>
#       <H>6.28994412e-004</H>
#       <I>1.93495619e-005</I>
#       <J>1.34660126e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>4373</SerialNumber>
#       <CalibrationDate>29-Oct-14</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.80144808e+000</G>
#         <H>1.39566790e+000</H>
#         <I>-1.33595423e-003</I>
#         <J>1.63383143e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Fluorometer, Seapoint -->
#     <FluoroSeapointSensor SensorID="11" >
#       <SerialNumber>2460</SerialNumber>
#       <CalibrationDate>31 MAY 2013</CalibrationDate>
#       <!-- The following is an array index, not the actual gain setting. -->
#       <GainSetting>1</GainSetting>
#       <Offset>0.000</Offset>
#     </FluoroSeapointSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Fluorometer, WET Labs ECO CDOM -->
#     <FluoroWetlabCDOM_Sensor SensorID="19" >
#       <SerialNumber>FLCDRTD-1991</SerialNumber>
#       <CalibrationDate>19-Mar-12</CalibrationDate>
#       <ScaleFactor>50.000</ScaleFactor>
#       <!-- Dark output -->
#       <Vblank>0.043</Vblank>
#     </FluoroWetlabCDOM_Sensor>
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Free -->
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, User Polynomial -->
#     <UserPolynomialSensor SensorID="61" >
#       <SerialNumber>0136</SerialNumber>
#       <CalibrationDate>08/01/2013</CalibrationDate>
#       <SensorName>RINKO-III DO</SensorName>
#       <A0>0.00000000</A0>
#       <A1>0.00000000</A1>
#       <A2>0.00000000</A2>
#       <A3>0.00000000</A3>
#     </UserPolynomialSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, User Polynomial, 2 -->
#     <UserPolynomialSensor SensorID="61" >
#       <SerialNumber>0136</SerialNumber>
#       <CalibrationDate>08/01/2013</CalibrationDate>
#       <SensorName>RINKO-III Temp</SensorName>
#       <A0>0.00000000</A0>
#       <A1>0.00000000</A1>
#       <A2>0.00000000</A2>
#       <A3>0.00000000</A3>
#     </UserPolynomialSensor>
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>7232.302492</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>15.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Transmissometer, WET Labs C-Star -->
#     <WET_LabsCStar SensorID="71" >
#       <SerialNumber>CST-1681DR</SerialNumber>
#       <CalibrationDate>07-Nov-14</CalibrationDate>
#       <M>21.2810</M>
#       <B>-0.0430</B>
#       <PathLength>0.250</PathLength>
#     </WET_LabsCStar>
#   </sensor>
# </Sensors>
# datcnv_date = Jan 07 2018 22:14:16, 7.23.2 [datcnv_vars = 12]
# datcnv_in = Z:\data\r2r\cruise\SKQ201511S\fileset\118758\data\skq201511s-025.hex Z:\data\r2r\cruise\SKQ201511S\fileset\118758\data\skq201511s-025.XMLCON
# datcnv_skipover = 0
# celltm_date = Jan 07 2018 22:14:20, 7.23.2
# celltm_in = Z:\data\local\cruise\SKQ201511S\products\r2rctd\skq201511s-025.cnv
# celltm_alpha = 0.0300, 0.0300
# celltm_tau = 7.0000, 7.0000
# celltm_temp_sensor_use_for_cond = primary, secondary
# binavg_date = Jan 07 2018 22:14:24, 7.23.2
# binavg_in = Z:\data\local\cruise\SKQ201511S\products\r2rctd\skq201511s-025.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
   72.17591 -148.07875    -0.9719   2.069982    24.9292      3.712      3.750    -0.9721   2.069775    24.9267      99.28          1      23160 0.0000e+00
   72.17276 -148.09683    -0.9733   2.071668    24.9520      4.762      4.811    -0.9734   2.071468    24.9495      99.49          1        302 0.0000e+00
   72.17265 -148.09758    -0.9730   2.071970    24.9560      4.169      4.212    -0.9730   2.071796    24.9538      99.09          1       1423 0.0000e+00
   72.17082 -148.10905    -0.9791   2.074788    24.9987      3.212      3.246    -0.9790   2.074626    24.9964      98.94          1        910 0.0000e+00
   72.16966 -148.11617    -0.9761   2.076298    25.0166      2.020      2.041    -0.9764   2.076006    25.0130      99.49          1        150 0.0000e+00
   72.16964 -148.11624    -0.9773   2.075943    25.0134      0.989      0.999    -0.9773   2.075724    25.0106      99.49          1         21 0.0000e+00