Ocean Surveyor Broadband/Narrowband ADCP Teledyne RD Instruments (c) 1997-2008 All rights reserved. Firmware Version: 23.17 >TS? TS 15/05/19,04:57:07.76 --------- Set System Date and Time >TS150519045534 >CR1 [Parameters set to FACTORY defaults] >WD 111 00 0000 >ND 111 00 0000 >EA04500 >NP1 >NN60 >NS1600 >NF800 >WP0 >WN80 >WS800 >WF800 >BP0 >BX10000 >TP00:01.80 >CX0,0 >B? Available Commands: BA 030 -------------------------- Amplitude Threshold [0..255] BC 220 -------------------------- Correlation Threshold [0..255] BE 1000 ------------------------- Error Velocity Threshold (mm/s) BP 0 ---------------------------- Number of BT Pings in an ensemble BX 10000 ------------------------ Max Depth (dm) B? ------------------------------ Display B-Command Menu >N? Available Commands: NA 255 -------------------------- False Target Amplitude Threshold [0-255] ND 111000000 -------------------- Data Out {v;c;a;p;s;*;*;*;*} NE 1000 ------------------------- Error Velocity Threshold (mm/s) NF 0800 ------------------------- Blanking Distance (cm) NN 060 -------------------------- Number of Bins [0-128] NP 001 -------------------------- Number of Pings NS 1600 ------------------------- Bin Size (cm) N? ------------------------------ Display N-Command Menu >W? Available Commands: WA 255 -------------------------- False Target Amplitude Threshold [0-255] WC 120 -------------------------- Correlation Threshold [0-255] WD 111000000 -------------------- Data Out {v;c;a;p;s;*;*;*;*} WE 1000 ------------------------- Error Velocity Threshold (mm/s) WF 0800 ------------------------- Blanking Distance (cm) WN 080 -------------------------- Number of Bins [1-128] WP 000 -------------------------- Number of Pings WS 0800 ------------------------- Bin Size (cm) WV 0390 ------------------------- Ambiguity Velocity (cm/s) W? ------------------------------ Display W-Command Menu >E? Available Commands: EA +04500 ----------------------- Heading Alignment (.01 deg cw) EC 1500 ------------------------- Speed Of Sound (m/s) ED 00000 ------------------------ Xdcr Depth(+)/Keel Offset(-) (dm) EE 111110 ----------------------- Attitude Data Output and Interpolation EF +001 ------------------------- External Pitch/Roll Factor EH 00000,1 ---------------------- Heading {heading;frame} EI +00000 ----------------------- Roll Misalignment Angle (.01 deg cw) EJ +00000 ----------------------- Pitch Misalignment Angle (.01 deg cw) EP +0000,+0000,1 ---------------- Tilts {pitch;roll;frame} ER +0000 ------------------------ Roll (.01 deg cw) ES 35 --------------------------- Salinity (ppt) ET 2100 ------------------------- Water Temperature (.01 deg C) EU 0 ---------------------------- Orientation [up=1, down=0] EV +00000 ----------------------- Heading Bias (.01 deg cw) EX 00000 ------------------------ Coordinate Transformations EZ 10111010 --------------------- Sensor Source {c;d;h;p;r;s;t;u} E? ------------------------------ Display E-Command Menu >C? Available Commands: CB 411 -------------------------- Serial Port Control {baud;parity;stop} CC 0 ---------------------------- Suppress Pair(s) [0=none, 1=1-2, 3=3-4, 4=all] CD 00000000 --------------------- Set Debug Flag CF 11110 ------------------------ Set Ctrl Flags {e;p;b;s;*} CK ------------------------------ Save Command Parameters to Flash CM 0 ---------------------------- Suppress Beam [0=none] CR ------------------------------ Restore Cmd defaults [0=user,1=factory] CS ------------------------------ Start Pinging CU 0 ---------------------------- Use calibrated RSSI [0=raw,1=calibrated] CW 1 ---------------------------- Select dual mode data [0=broad,1=narrow] CX 0,0,00000 -------------------- Set Trigger Mode {in;out;[timeout]} C? ------------------------------ Display C-Command Menu >T? Available Commands: TC ------------------------------ System Timer Value TE 00:00:00.00 ------------------ Time Between Ensembles TP 00:01.80 --------------------- Time Between Pings TS 15/05/19,04:55:42.19 --------- Set System Date and Time T? ------------------------------ Display T-Command Menu >PS0 Frequency: 76800 HZ Configuration: 4 BEAM, JANUS Transducer Type: ROUND 32x32 Beamformer Rev: A02 or later Beam Angle: 30 DEGREES Beam Pattern: CONVEX Orientation: DOWN CPU Firmware: 23.17 FPGA Version: AA Sensors: TEMP SYNCHRO >CF11110 > >CB511 > Ocean Surveyor Broadband/Narrowband ADCP Teledyne RD Instruments (c) 1997-2008 All rights reserved. Firmware Version: 23.17 > Ocean Surveyor Broadband/Narrowband ADCP Teledyne RD Instruments (c) 1997-2008 All rights reserved. Firmware Version: 23.17 >TS? TS 15/06/14,01:06:11.77 --------- Set System Date and Time >? Available Commands: @ ------------------------------ Special Commands & ------------------------------ Engineering Test Commands # ------------------------------ Expert Commands B ------------------------------ Bottom Track Commands C ------------------------------ Control Commands E ------------------------------ Environment Commands L ------------------------------ Fault Log Commands N ------------------------------ Narrow Band Mode Commands P ------------------------------ Performance Test Commands T ------------------------------ Time Commands V ------------------------------ Display Banner W ------------------------------ Water Profiling Commands ? ------------------------------ Display Main Menu >L ERR: Bad command! > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >? Available Commands: @ ------------------------------ Special Commands & ------------------------------ Engineering Test Commands # ------------------------------ Expert Commands B ------------------------------ Bottom Track Commands C ------------------------------ Control Commands E ------------------------------ Environment Commands L ------------------------------ Fault Log Commands N ------------------------------ Narrow Band Mode Commands P ------------------------------ Performance Test Commands T ------------------------------ Time Commands V ------------------------------ Display Banner W ------------------------------ Water Profiling Commands ? ------------------------------ Display Main Menu >L ERR: Bad command! >L? Available Commands: LC ------------------------------ Clear Fault Log LD ------------------------------ Display Fault Log LL ------------------------------ Display Fault List L? ------------------------------ Display L-Command Menu >LL Fault List: Code Fault 001 RESET 100 FPGA 201 RTC BATT LO 202 RTC POWER 203 RTC CAL 204 RTC FLAGS 205 UNKNOWN INT 206 CLOCK DRIFT 300 COM TIMEOUT 301 BUFFER OUT 400 RAM FAULT 401 ROM FAULT 402 MALLOC FAIL 500 GYRO COM 501 GYRO CKSUM 502 TCM2 COM 503 TCM2 CKSUM 504 TEMP INIT 505 TEMP READ 506 TEMP RANGE 600 SYS CONFIG 601 CMD PARAMS 602 COM PARAMS 603 RSSI CALIB 700 DMA TIMEOUT 800 TIMER INTR 801 RTC INTR 802 RSSI INTR 803 QUART INTR >LD Time of first fault: 1910/02/01,12:26:30 Overflow count: 0 Fault Log: Code Count Time Parameter 506 TEMP RANGE 10 2010/02/16,07:34:26 FFFFF1AAh 803 QUART INTR 10 2010/05/13,16:32:42 00000001h End of fault log. >TD ERR: Bad command! >T? Available Commands: TC ------------------------------ System Timer Value TE 00:00:00.00 ------------------ Time Between Ensembles TP 00:01.80 --------------------- Time Between Pings TS 15/06/14,01:07:34.13 --------- Set System Date and Time T? ------------------------------ Display T-Command Menu >TS ERR: Bad command parameters! >V Ocean Surveyor Broadband/Narrowband ADCP Teledyne RD Instruments (c) 1997-2008 All rights reserved. Firmware Version: 23.17 >V? V ------------------------------ Display Banner >? Available Commands: @ ------------------------------ Special Commands & ------------------------------ Engineering Test Commands # ------------------------------ Expert Commands B ------------------------------ Bottom Track Commands C ------------------------------ Control Commands E ------------------------------ Environment Commands L ------------------------------ Fault Log Commands N ------------------------------ Narrow Band Mode Commands P ------------------------------ Performance Test Commands T ------------------------------ Time Commands V ------------------------------ Display Banner W ------------------------------ Water Profiling Commands ? ------------------------------ Display Main Menu >&? Available Commands: &A ------------------------------ Transform Debugging &B 000 -------------------------- Modulator Control {enable;plane;dir} &D 12 --------------------------- Set Xmit Duty Cycle Limit (percent) &F ------------------------------ Flash Block Menu &L ------------------------------ Download New Firmware &M ------------------------------ Engineering Tests &N 0000 ------------------------- Select Engineering Data &V 50 --------------------------- Amb Lane Ctr {% of WV} [0=use &W] &W +000,+000,+195,-195 ---------- Amb Lane Ctr {b1;b2;b3;b4} (cm/s) &X ------------------------------ Number Conversions &? ------------------------------ Display &-Command Menu >&M? &M ------------------------------ Engineering Tests >&M ERR: Bad command parameters! >? Available Commands: @ ------------------------------ Special Commands & ------------------------------ Engineering Test Commands # ------------------------------ Expert Commands B ------------------------------ Bottom Track Commands C ------------------------------ Control Commands E ------------------------------ Environment Commands L ------------------------------ Fault Log Commands N ------------------------------ Narrow Band Mode Commands P ------------------------------ Performance Test Commands T ------------------------------ Time Commands V ------------------------------ Display Banner W ------------------------------ Water Profiling Commands ? ------------------------------ Display Main Menu >&M ERR: Bad command parameters! >&M? &M ------------------------------ Engineering Tests >&M ? &M ------------------------------ Engineering Tests > Ocean Surveyor Broadband/Narrowband ADCP Teledyne RD Instruments (c) 1997-2008 All rights reserved. Firmware Version: 23.17 >TS? TS 15/06/14,01:10:07.78 --------- Set System Date and Time >TS150614010825 >CR1 [Parameters set to FACTORY defaults] >WD 111 00 0000 >ND 111 00 0000 >EA04500 >NP1 >NN60 >NS1600 >NF800 >WP0 >WN80 >WS800 >WF800 >BP0 >BX10000 >TP00:01.80 >CX0,0 >B? Available Commands: BA 030 -------------------------- Amplitude Threshold [0..255] BC 220 -------------------------- Correlation Threshold [0..255] BE 1000 ------------------------- Error Velocity Threshold (mm/s) BP 0 ---------------------------- Number of BT Pings in an ensemble BX 10000 ------------------------ Max Depth (dm) B? ------------------------------ Display B-Command Menu >N? Available Commands: NA 255 -------------------------- False Target Amplitude Threshold [0-255] ND 111000000 -------------------- Data Out {v;c;a;p;s;*;*;*;*} NE 1000 ------------------------- Error Velocity Threshold (mm/s) NF 0800 ------------------------- Blanking Distance (cm) NN 060 -------------------------- Number of Bins [0-128] NP 001 -------------------------- Number of Pings NS 1600 ------------------------- Bin Size (cm) N? ------------------------------ Display N-Command Menu >W? Available Commands: WA 255 -------------------------- False Target Amplitude Threshold [0-255] WC 120 -------------------------- Correlation Threshold [0-255] WD 111000000 -------------------- Data Out {v;c;a;p;s;*;*;*;*} WE 1000 ------------------------- Error Velocity Threshold (mm/s) WF 0800 ------------------------- Blanking Distance (cm) WN 080 -------------------------- Number of Bins [1-128] WP 000 -------------------------- Number of Pings WS 0800 ------------------------- Bin Size (cm) WV 0390 ------------------------- Ambiguity Velocity (cm/s) W? ------------------------------ Display W-Command Menu >E? Available Commands: EA +04500 ----------------------- Heading Alignment (.01 deg cw) EC 1500 ------------------------- Speed Of Sound (m/s) ED 00000 ------------------------ Xdcr Depth(+)/Keel Offset(-) (dm) EE 111110 ----------------------- Attitude Data Output and Interpolation EF +001 ------------------------- External Pitch/Roll Factor EH 00000,1 ---------------------- Heading {heading;frame} EI +00000 ----------------------- Roll Misalignment Angle (.01 deg cw) EJ +00000 ----------------------- Pitch Misalignment Angle (.01 deg cw) EP +0000,+0000,1 ---------------- Tilts {pitch;roll;frame} ER +0000 ------------------------ Roll (.01 deg cw) ES 35 --------------------------- Salinity (ppt) ET 2100 ------------------------- Water Temperature (.01 deg C) EU 0 ---------------------------- Orientation [up=1, down=0] EV +00000 ----------------------- Heading Bias (.01 deg cw) EX 00000 ------------------------ Coordinate Transformations EZ 10111010 --------------------- Sensor Source {c;d;h;p;r;s;t;u} E? ------------------------------ Display E-Command Menu >C? Available Commands: CB 411 -------------------------- Serial Port Control {baud;parity;stop} CC 0 ---------------------------- Suppress Pair(s) [0=none, 1=1-2, 3=3-4, 4=all] CD 00000000 --------------------- Set Debug Flag CF 11110 ------------------------ Set Ctrl Flags {e;p;b;s;*} CK ------------------------------ Save Command Parameters to Flash CM 0 ---------------------------- Suppress Beam [0=none] CR ------------------------------ Restore Cmd defaults [0=user,1=factory] CS ------------------------------ Start Pinging CU 0 ---------------------------- Use calibrated RSSI [0=raw,1=calibrated] CW 1 ---------------------------- Select dual mode data [0=broad,1=narrow] CX 0,0,00000 -------------------- Set Trigger Mode {in;out;[timeout]} C? ------------------------------ Display C-Command Menu >T? Available Commands: TC ------------------------------ System Timer Value TE 00:00:00.00 ------------------ Time Between Ensembles TP 00:01.80 --------------------- Time Between Pings TS 15/06/14,01:08:33.26 --------- Set System Date and Time T? ------------------------------ Display T-Command Menu >PS0 Frequency: 76800 HZ Configuration: 4 BEAM, JANUS Transducer Type: ROUND 32x32 Beamformer Rev: A02 or later Beam Angle: 30 DEGREES Beam Pattern: CONVEX Orientation: DOWN CPU Firmware: 23.17 FPGA Version: AA Sensors: TEMP SYNCHRO >CF11110 > >CB511 > Ocean Surveyor Broadband/Narrowband ADCP Teledyne RD Instruments (c) 1997-2008 All rights reserved. Firmware Version: 23.17 > Ocean Surveyor Broadband/Narrowband ADCP Teledyne RD Instruments (c) 1997-2008 All rights reserved. Firmware Version: 23.17 >TS? TS 15/06/14,01:09:29.73 --------- Set System Date and Time >? Available Commands: @ ------------------------------ Special Commands & ------------------------------ Engineering Test Commands # ------------------------------ Expert Commands B ------------------------------ Bottom Track Commands C ------------------------------ Control Commands E ------------------------------ Environment Commands L ------------------------------ Fault Log Commands N ------------------------------ Narrow Band Mode Commands P ------------------------------ Performance Test Commands T ------------------------------ Time Commands V ------------------------------ Display Banner W ------------------------------ Water Profiling Commands ? ------------------------------ Display Main Menu >@? Available Commands: @C ------------------------------ Change System Configuration @D ------------------------------ Display Memory Block @F ------------------------------ Fill Memory @G ------------------------------ Get Command @I ------------------------------ Enter RSSI Calibration Data @K ------------------------------ Read Timer Tick @P ------------------------------ Put Command @R ------------------------------ Display CPU Registers @S ------------------------------ Display Stack Pointer @W ------------------------------ Write FLASH Command @Z ------------------------------ Receive and Correlate Data @? ------------------------------ Display @-Command Menu >? Available Commands: @ ------------------------------ Special Commands & ------------------------------ Engineering Test Commands # ------------------------------ Expert Commands B ------------------------------ Bottom Track Commands C ------------------------------ Control Commands E ------------------------------ Environment Commands L ------------------------------ Fault Log Commands N ------------------------------ Narrow Band Mode Commands P ------------------------------ Performance Test Commands T ------------------------------ Time Commands V ------------------------------ Display Banner W ------------------------------ Water Profiling Commands ? ------------------------------ Display Main Menu >#? Available Commands: #B ------------------------------ Bottom Track Expert Commands #N ------------------------------ Narrowband Profile Expert Commands #W ------------------------------ Broadband Profile Expert Commands #? ------------------------------ Display #-Command Menu >P? Available Commands: PA ------------------------------ Run all Built-In-Tests PC ------------------------------ Display Sensor Data [0=help] PD 0 ---------------------------- Data Stream Select PS ------------------------------ System Info [0=config,1=fldr,2=vldr,4=pings] PT ------------------------------ Diagnostic Tests [0=help] P? ------------------------------ Display P-Command Menu >PA RAM test...........PASS ROM test...........PASS Receive test.......PASS Bandwidth test.....FAIL >PT >PT? PT ------------------------------ Diagnostic Tests [0=help] >PT 0 Built In Tests ---------------- PT0 = Help PT1 = NA PT2 = NA PT3 = Receive Path Test PT4 = NA PT5 = Electronics Wrap Around Test PT6 = Receive Bandwidth Test PT7 = NA PT8 = NA PT9 = NA NOTE: Add 100 for automatic test repeat PT200 = All tests >PT6 Receive Bandwidth: ........................................           Expected Bm1 Bm2 Bm3 Bm4 -------- ----- ----- ----- ----- 7750 7546 6108 7080 7358 FAILED: Bm2 6108 < 6200 >PT6 Receive Bandwidth: ........................................           Expected Bm1 Bm2 Bm3 Bm4 -------- ----- ----- ----- ----- 7750 7512 6099 7165 7403 FAILED: Bm2 6099 < 6200 >PT3 Correlation Magnitude: ........ Lag Bm1 Bm2 Bm3 Bm4 0 1.00 1.00 1.00 1.00 1 0.82 0.82 0.82 0.82 2 0.44 0.47 0.44 0.43 3 0.13 0.22 0.12 0.12 4 0.03 0.13 0.04 0.03 5 0.03 0.13 0.07 0.05 6 0.01 0.13 0.07 0.03 7 0.02 0.11 0.07 0.02 RSSI: 27 15 23 20 PASSED >PT5 CAUTION: This test will transmit, which may damage the power supply if the transducer is not in water. Continue (yes or no)? yes Correlation Data: Amplitude Data: Bin 0: 12 55 74 87 42 20 28 34 Bin 1: 104 62 80 100 45 53 23 62 Bin 2: 58 89 17 63 12 26 13 13 Bin 3: 52 19 44 63 20 14 15 10 Bin 4: 88 70 56 105 18 12 15 8 Bin 5: 88 61 47 63 14 8 11 10 Bin 6: 44 112 44 19 13 11 14 9 Bin 7: 68 61 44 68 30 14 21 11 Bin 8: 62 56 17 82 9 15 14 14 Bin 9: 68 115 35 47 15 19 26 6 Bin 10: 56 58 27 121 16 13 18 7 Bin 11: 27 97 58 96 >P? Available Commands: PA ------------------------------ Run all Built-In-Tests PC ------------------------------ Display Sensor Data [0=help] PD 0 ---------------------------- Data Stream Select PS ------------------------------ System Info [0=config,1=fldr,2=vldr,4=pings] PT ------------------------------ Diagnostic Tests [0=help] P? ------------------------------ Display P-Command Menu >PS? PS ------------------------------ System Info [0=config,1=fldr,2=vldr,4=pings] >P? Available Commands: PA ------------------------------ Run all Built-In-Tests PC ------------------------------ Display Sensor Data [0=help] PD 0 ---------------------------- Data Stream Select PS ------------------------------ System Info [0=config,1=fldr,2=vldr,4=pings] PT ------------------------------ Diagnostic Tests [0=help] P? ------------------------------ Display P-Command Menu >PA RAM test...........PASS ROM test...........PASS Receive test.......PASS Bandwidth test.....FAIL > Ocean Surveyor Broadband/Narrowband ADCP Teledyne RD Instruments (c) 1997-2008 All rights reserved. Firmware Version: 23.17 >TS? TS 15/06/14,01:48:02.76 --------- Set System Date and Time >TS150614014803 >CR1 [Parameters set to FACTORY defaults] >WD 111 00 0000 >ND 111 00 0000 >EA04500 >NP1 >NN60 >NS1600 >NF800 >WP0 >WN80 >WS800 >WF800 >BP0 >BX10000 >TP00:01.80 >CX0,0 >B? Available Commands: BA 030 -------------------------- Amplitude Threshold [0..255] BC 220 -------------------------- Correlation Threshold [0..255] BE 1000 ------------------------- Error Velocity Threshold (mm/s) BP 0 ---------------------------- Number of BT Pings in an ensemble BX 10000 ------------------------ Max Depth (dm) B? ------------------------------ Display B-Command Menu >N? Available Commands: NA 255 -------------------------- False Target Amplitude Threshold [0-255] ND 111000000 -------------------- Data Out {v;c;a;p;s;*;*;*;*} NE 1000 ------------------------- Error Velocity Threshold (mm/s) NF 0800 ------------------------- Blanking Distance (cm) NN 060 -------------------------- Number of Bins [0-128] NP 001 -------------------------- Number of Pings NS 1600 ------------------------- Bin Size (cm) N? ------------------------------ Display N-Command Menu >W? Available Commands: WA 255 -------------------------- False Target Amplitude Threshold [0-255] WC 120 -------------------------- Correlation Threshold [0-255] WD 111000000 -------------------- Data Out {v;c;a;p;s;*;*;*;*} WE 1000 ------------------------- Error Velocity Threshold (mm/s) WF 0800 ------------------------- Blanking Distance (cm) WN 080 -------------------------- Number of Bins [1-128] WP 000 -------------------------- Number of Pings WS 0800 ------------------------- Bin Size (cm) WV 0390 ------------------------- Ambiguity Velocity (cm/s) W? ------------------------------ Display W-Command Menu >E? Available Commands: EA +04500 ----------------------- Heading Alignment (.01 deg cw) EC 1500 ------------------------- Speed Of Sound (m/s) ED 00000 ------------------------ Xdcr Depth(+)/Keel Offset(-) (dm) EE 111110 ----------------------- Attitude Data Output and Interpolation EF +001 ------------------------- External Pitch/Roll Factor EH 00000,1 ---------------------- Heading {heading;frame} EI +00000 ----------------------- Roll Misalignment Angle (.01 deg cw) EJ +00000 ----------------------- Pitch Misalignment Angle (.01 deg cw) EP +0000,+0000,1 ---------------- Tilts {pitch;roll;frame} ER +0000 ------------------------ Roll (.01 deg cw) ES 35 --------------------------- Salinity (ppt) ET 2100 ------------------------- Water Temperature (.01 deg C) EU 0 ---------------------------- Orientation [up=1, down=0] EV +00000 ----------------------- Heading Bias (.01 deg cw) EX 00000 ------------------------ Coordinate Transformations EZ 10111010 --------------------- Sensor Source {c;d;h;p;r;s;t;u} E? ------------------------------ Display E-Command Menu >C? Available Commands: CB 411 -------------------------- Serial Port Control {baud;parity;stop} CC 0 ---------------------------- Suppress Pair(s) [0=none, 1=1-2, 3=3-4, 4=all] CD 00000000 --------------------- Set Debug Flag CF 11110 ------------------------ Set Ctrl Flags {e;p;b;s;*} CK ------------------------------ Save Command Parameters to Flash CM 0 ---------------------------- Suppress Beam [0=none] CR ------------------------------ Restore Cmd defaults [0=user,1=factory] CS ------------------------------ Start Pinging CU 0 ---------------------------- Use calibrated RSSI [0=raw,1=calibrated] CW 1 ---------------------------- Select dual mode data [0=broad,1=narrow] CX 0,0,00000 -------------------- Set Trigger Mode {in;out;[timeout]} C? ------------------------------ Display C-Command Menu >T? Available Commands: TC ------------------------------ System Timer Value TE 00:00:00.00 ------------------ Time Between Ensembles TP 00:01.80 --------------------- Time Between Pings TS 15/06/14,01:48:11.26 --------- Set System Date and Time T? ------------------------------ Display T-Command Menu >PS0 Frequency: 76800 HZ Configuration: 4 BEAM, JANUS Transducer Type: ROUND 32x32 Beamformer Rev: A02 or later Beam Angle: 30 DEGREES Beam Pattern: CONVEX Orientation: DOWN CPU Firmware: 23.17 FPGA Version: AA Sensors: TEMP SYNCHRO >CF11110 > >CB511 > Ocean Surveyor Broadband/Narrowband ADCP Teledyne RD Instruments (c) 1997-2008 All rights reserved. Firmware Version: 23.17 > Ocean Surveyor Broadband/Narrowband ADCP Teledyne RD Instruments (c) 1997-2008 All rights reserved. Firmware Version: 23.17 >TS? TS 15/06/14,04:08:19.69 --------- Set System Date and Time >À Ocean Surveyor Broadband/Narrowband ADCP Teledyne RD Instruments (c) 1997-2008 All rights reserved. Firmware Version: 23.17 [Parameters set to USER defaults] > Ocean Surveyor Broadband/Narrowband ADCP Teledyne RD Instruments (c) 1997-2008 All rights reserved. Firmware Version: 23.17 >TS? TS 15/06/14,06:02:31.76 --------- Set System Date and Time >TS150614060231 >CR1 [Parameters set to FACTORY defaults] >WD 111 00 0000 >ND 111 00 0000 >EA04500 >NP1 >NN60 >NS1600 >NF800 >WP0 >WN80 >WS800 >WF800 >BP0 >BX10000 >TP00:01.80 >CX0,0 >B? Available Commands: BA 030 -------------------------- Amplitude Threshold [0..255] BC 220 -------------------------- Correlation Threshold [0..255] BE 1000 ------------------------- Error Velocity Threshold (mm/s) BP 0 ---------------------------- Number of BT Pings in an ensemble BX 10000 ------------------------ Max Depth (dm) B? ------------------------------ Display B-Command Menu >N? Available Commands: NA 255 -------------------------- False Target Amplitude Threshold [0-255] ND 111000000 -------------------- Data Out {v;c;a;p;s;*;*;*;*} NE 1000 ------------------------- Error Velocity Threshold (mm/s) NF 0800 ------------------------- Blanking Distance (cm) NN 060 -------------------------- Number of Bins [0-128] NP 001 -------------------------- Number of Pings NS 1600 ------------------------- Bin Size (cm) N? ------------------------------ Display N-Command Menu >W? Available Commands: WA 255 -------------------------- False Target Amplitude Threshold [0-255] WC 120 -------------------------- Correlation Threshold [0-255] WD 111000000 -------------------- Data Out {v;c;a;p;s;*;*;*;*} WE 1000 ------------------------- Error Velocity Threshold (mm/s) WF 0800 ------------------------- Blanking Distance (cm) WN 080 -------------------------- Number of Bins [1-128] WP 000 -------------------------- Number of Pings WS 0800 ------------------------- Bin Size (cm) WV 0390 ------------------------- Ambiguity Velocity (cm/s) W? ------------------------------ Display W-Command Menu >E? Available Commands: EA +04500 ----------------------- Heading Alignment (.01 deg cw) EC 1500 ------------------------- Speed Of Sound (m/s) ED 00000 ------------------------ Xdcr Depth(+)/Keel Offset(-) (dm) EE 111110 ----------------------- Attitude Data Output and Interpolation EF +001 ------------------------- External Pitch/Roll Factor EH 00000,1 ---------------------- Heading {heading;frame} EI +00000 ----------------------- Roll Misalignment Angle (.01 deg cw) EJ +00000 ----------------------- Pitch Misalignment Angle (.01 deg cw) EP +0000,+0000,1 ---------------- Tilts {pitch;roll;frame} ER +0000 ------------------------ Roll (.01 deg cw) ES 35 --------------------------- Salinity (ppt) ET 2100 ------------------------- Water Temperature (.01 deg C) EU 0 ---------------------------- Orientation [up=1, down=0] EV +00000 ----------------------- Heading Bias (.01 deg cw) EX 00000 ------------------------ Coordinate Transformations EZ 10111010 --------------------- Sensor Source {c;d;h;p;r;s;t;u} E? ------------------------------ Display E-Command Menu >C? Available Commands: CB 411 -------------------------- Serial Port Control {baud;parity;stop} CC 0 ---------------------------- Suppress Pair(s) [0=none, 1=1-2, 3=3-4, 4=all] CD 00000000 --------------------- Set Debug Flag CF 11110 ------------------------ Set Ctrl Flags {e;p;b;s;*} CK ------------------------------ Save Command Parameters to Flash CM 0 ---------------------------- Suppress Beam [0=none] CR ------------------------------ Restore Cmd defaults [0=user,1=factory] CS ------------------------------ Start Pinging CU 0 ---------------------------- Use calibrated RSSI [0=raw,1=calibrated] CW 1 ---------------------------- Select dual mode data [0=broad,1=narrow] CX 0,0,00000 -------------------- Set Trigger Mode {in;out;[timeout]} C? ------------------------------ Display C-Command Menu >T? Available Commands: TC ------------------------------ System Timer Value TE 00:00:00.00 ------------------ Time Between Ensembles TP 00:01.80 --------------------- Time Between Pings TS 15/06/14,06:02:39.27 --------- Set System Date and Time T? ------------------------------ Display T-Command Menu >PS0 Frequency: 76800 HZ Configuration: 4 BEAM, JANUS Transducer Type: ROUND 32x32 Beamformer Rev: A02 or later Beam Angle: 30 DEGREES Beam Pattern: CONVEX Orientation: DOWN CPU Firmware: 23.17 FPGA Version: AA Sensors: TEMP SYNCHRO >CF11110 > >CB511 > Ocean Surveyor Broadband/Narrowband ADCP Teledyne RD Instruments (c) 1997-2008 All rights reserved. Firmware Version: 23.17 > Ocean Surveyor Broadband/Narrowband ADCP Teledyne RD Instruments (c) 1997-2008 All rights reserved. Firmware Version: 23.17 >TS? TS 15/06/14,06:03:00.71 --------- Set System Date and Time >