ts? TS = 11/07/18,23:13:16 --- Time Set (yr/mon/day,hour:min:sec) >rf RF = 11517021,244047872 --- Rec space used (bytes), free (bytes) >deploy? Deployment Commands: RE ----------------------- Recorder ErAsE RN ----------------------- Set Deployment Name WD = 111 100 000 --------- Data Out (Vel,Cor,Amp; PG,St,P0; P1,P2,P3) WF = 0176 ---------------- Blank After Transmit (cm) WN = 022 ----------------- Number of depth cells (1-128) WP = 00115 --------------- Pings per Ensemble (0-16384) WS = 0200 ---------------- Depth Cell Size (cm) WV = 200 ----------------- Mode 1 Ambiguity Vel (cm/s radial) BP = 005 ----------------- Bottom Track Pings per Ensemble TE = 00:30:00.00 --------- Time per Ensemble (hrs:min:sec.sec/100) TF = **/**/**,**:**:** --- Time of First Ping (yr/mon/day,hour:min:sec) TP = 00:14.00 ------------ Time per Ping (min:sec.sec/100) TS = 11/07/18,23:14:58 --- Time Set (yr/mon/day,hour:min:sec) EA = +00000 -------------- Heading Alignment (1/100 deg) EB = +00000 -------------- Heading Bias (1/100 deg) ED = 00400 --------------- Transducer Depth (0 - 65535 dm) ES = 33 ------------------ Salinity (0-40 pp thousand) EX = 11111 --------------- Coord Transform (Xform: Type,Tilts,3 Bm,Map) Press any key to continue EZ = 1111111 ------------- Sensor Source (C,D,H,P,R,S,T) CF = 11101 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec) CK ----------------------- Keep Parameters as USER Defaults CR # --------------------- Retrieve Parameters (0 = USER, 1 = FACTORY) CS ----------------------- Start Deployment >system? System Control, Data Recovery and Testing Commands: AC ----------------------- Output Active Fluxgate & Tilt Calibration data AF ----------------------- Field calibrate to remove hard/soft iron error AR ----------------------- Restore factory fluxgate calibration data AX ----------------------- Examine compass performance AZ ----------------------- Zero pressure reading CB = 411 ----------------- Serial Port Control (Baud; Par; Stop) CP # --------------------- Polled Mode (0 = NORMAL, 1 = POLLED) CZ ---------------------- Power Down Instrument FC ----------------------- Clear Fault Log FD ----------------------- Display Fault Log OL ----------------------- Display Features List PA ----------------------- Pre-Deployment Tests PC1 ---------------------- Beam Continuity PC2 ---------------------- Sensor Data PS0 ---------------------- System Configuration PS3 ---------------------- Transformation Matrices RR ----------------------- Recorder Directory Press any key to continue RF ----------------------- Recorder Space used/free (bytes) RY ----------------------- Upload Recorder Files to Host >ts0 ERR 002: NUMERAL EXPECTED >ps0 Instrument S/N: 1495 Frequency: 307200 HZ Configuration: 4 BEAM, JANUS Match Layer: 10 Beam Angle: 20 DEGREES Beam Pattern: CONVEX Orientation: UP Sensor(s): HEADING TILT 1 TILT 2 TEMPERATURE Temp Sens Offset: -0.24 degrees C CPU Firmware: 16.20 [0] Boot Code Ver: Required: 1.13 Actual: 1.13 DEMOD #1 Ver: ad48, Type: 1f DEMOD #2 Ver: ad48, Type: 1f PWRTIMG Ver: 85d3, Type: 6 Board Serial Number Data: 62 00 00 02 48 A0 50 09 PIO727-3000-04C A4 00 00 02 48 80 98 09 REC727-1000-04A 35 00 00 02 48 86 77 09 DSP727-2001-04F 84 00 00 02 48 97 77 09 CPU727-2000-00H >ol FEATURES --------------------------------------------------------------------- Feature Installed --------------------------------------------------------------------- Bottom Track Yes Water Profile Yes High Resolution Water Modes No Lowered ADCP No Wave Gauge Acquisition No Shallow Bottom Mode No High Rate Pinging No See your technical manual or contact RDI for information on how to install additional capability in your WorkHorse. >pa PRE-DEPLOYMENT TESTS CPU TESTS: RTC......................................PASS RAM......................................PASS ROM......................................PASS RECORDER TESTS: PC Card #0...............................DETECTED Card Detect............................PASS Communication..........................PASS DOS Structure..........................PASS Sector Test (short)....................PASS PC Card #1...............................NOT DETECTED DSP TESTS: Timing RAM...............................PASS Demod RAM...............................PASS Demod REG...............................PASS FIFOs....................................PASS SYSTEM TESTS: XILINX Interrupts... IRQ3 IRQ3 IRQ3 ...PASS Receive Loop-Back........................PASS Wide Bandwidth........................***FAIL*** Narrow Bandwidth......................***FAIL*** RSSI Filter..............................PASS Transmit.................................PASS SENSOR TESTS: H/W Operation............................PASS >pc2 Press any key to quit sensor display ... Heading Pitch Roll Up/Down Attitude Temp Ambient Temp PRESSURE 209.03ø -1.89ø -1.11ø Up 14.08øC 14.41øC 0.0 kPa 208.22ø -1.97ø -0.77ø Up 14.07øC 14.42øC 0.0 kPa 208.04ø -2.20ø -0.75ø Up 14.07øC 14.45øC 0.0 kPa 208.88ø -2.21ø -0.82ø Up 14.07øC 14.41øC 0.0 kPa 209.09ø -2.13ø -0.64ø Up 14.05øC 14.45øC 0.0 kPa 209.07ø -2.15ø -0.46ø Up 14.02øC 14.42øC 0.0 kPa >pc1 BEAM CONTINUITY TEST When prompted to do so, vigorously rub the selected beam's face. If a beam does not PASS the test, send any character to the ADCP to automatically select the next beam. Collecting Statistical Data... 43 42 41 40 43 42 40 40 42 42 40 40 42 42 40 40 42 42 40 40 42 42 41 40 42 42 41 40 42 42 40 39 42 42 40 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 40 39 42 42 40 39 42 42 40 39 42 42 40 39 42 42 40 39 42 42 40 39 42 42 40 39 42 42 40 39 42 42 40 39 42 42 40 39 42 42 40 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 42 42 41 39 Rub Beam 1 = PASS Rub Beam 2 = PASS Rub Beam 3 = PASS Rub Beam 4 = PASS >pt2 Ambient Temperature = 14.45 Degrees C Attitude Temperature = 14.22 Degrees C Internal Moisture = 9116h >pt3 Correlation Magnitude: Wide Bandwidth Lag Bm1 Bm2 Bm3 Bm4 0 255 255 255 255 1 175 175 173 176 2 37 56 36 42 3 38 76 65 48 4 78 85 87 81 5 50 56 50 47 6 7 32 17 5 7 31 49 39 30 High Gain RSSI: 42 43 41 39 Low Gain RSSI: 21 19 18 12 SIN Duty Cycle: 49 49 46 48 COS Duty Cycle: 47 48 46 46 Receive Test Results = $00000000 ... PASS >pt4 IXMT = 1.4 Amps rms [Data=7ah] VXMT = 69.3 Volts rms [Data=75h] Z = 49.6 Ohms Transmit Test Results = $0 ... PASS >pt5 0 0 0 8 0 0 0 8 0 0 0 8 0 0 0 8 255 255 255 255 0 0 0 8 0 0 0 8 255 255 255 255 0 0 0 8 0 0 0 8 0 0 0 8 255 255 255 255 Electronics Test Results = $00000000 ... PASS >pt6 Receive Bandwidth: Sample bw bw bw bw bw rate expect Bm1 Bm2 Bm3 Bm4 307 120 65 57 61 64 Khz results PASS FAIL PASS PASS >py7 ERR 010: UNRECOGNIZED COMMAND >py7  t7 RSSI Time Constant: RSSI Filter Strobe 1 = 38400 Hz time Bm1 Bm2 Bm3 Bm4 msec cnts cnts cnts cnts 1 6 6 8 7 2 11 12 14 14 3 15 17 19 20 4 19 21 23 24 5 23 24 27 27 6 26 27 29 30 7 28 30 32 32 8 30 32 34 34 9 32 34 35 36 10 34 36 36 37 nom 43 45 41 42 result PASS PASS PASS PASS >rr Recorder Directory: Volume serial number for device #0 is 882f-e9b6 1495D000 000 11517021 07-18-11 11:12:02p r a [ 2] Bytes used on device #0 = 11517021 Total capacity = 255565824 bytes Total bytes used = 11517021 bytes in 1 files Total bytes free = 244047872 bytes >ps3 Beam Width: 3.7 degrees Beam Elevation Azimuth 1 -70.00 270.00 2 -70.00 90.00 3 -70.00 0.01 4 -70.00 180.00 Beam Directional Matrix (Down): 0.3420 0.0000 0.9397 0.2419 -0.3420 0.0000 0.9397 0.2419 0.0000 -0.3420 0.9397 -0.2419 0.0000 0.3420 0.9397 -0.2419 Instrument Transformation Matrix (Down): Q14: 1.4619 -1.4619 0.0000 0.0000 23952 -23952 0 0 0.0000 0.0000 -1.4619 1.4619 0 0 -23952 23952 0.2661 0.2661 0.2661 0.2661 4359 4359 4359 4359 1.0337 1.0337 -1.0337 -1.0337 16936 16936 -16936 -16936 Beam Angle Corrections Are Loaded. >ps4 Ping Sequence: W W W W W W W W W W W W W W W W W W W BW W W W W W W W W W W W W W W W W W W BW W W W W W W W W W W W W W W W W W W BW W W W W W W W W W W W W W W W W W W W BW W W W W W W W W W W W W W W W W W W BW W W W W W W W W W W W W W W W W W W >ad Display factory calibration data or active calibration data [f or a]?a ACTIVE FLUXGATE CALIBRATION MATRICES in NVRAM Calibration date and time: 5/24/1910 18:07:39 S inverse Ú ¿ Bx ³ 3.9451e-01 3.7313e-01 -2.1121e-02 -2.9712e-02 ³ By ³ -1.3015e-02 2.3530e-02 -5.1368e-01 4.6847e-03 ³ Bz ³ -1.6668e-01 1.7402e-01 1.1990e-02 -2.6565e-01 ³ Err ³ -3.3624e-01 3.9475e-01 3.0897e-02 4.7094e-01 ³ À Ù Coil Offset Ú ¿ ³ 3.4336e+04 ³ ³ 3.2265e+04 ³ ³ 3.4079e+04 ³ ³ 3.5329e+04 ³ À Ù Electrical Null Ú ¿ ³ 33924 ³ À Ù press any key to continue... TILT CALIBRATION MATRICES in NVRAM Calibration date and time: 9/6/2001 10:43:33 Average Temperature During Calibration was 25.3 øC Up Down Ú ¿ Ú ¿ Roll ³ -4.7836e-07 -1.9158e-05 ³ ³ 3.3766e-07 1.9704e-05 ³ Pitch ³ -1.8964e-05 5.1960e-07 ³ ³ -1.9553e-05 3.1690e-07 ³ À Ù À Ù Ú ¿ Ú ¿ Offset ³ 3.4128e+04 3.1975e+04 ³ ³ 3.1107e+04 3.2231e+04 ³ À Ù À Ù Ú ¿ Null ³ 33340 ³ À Ù >ax ------------------------------------------------------------------------------ RDI Compass Error Estimating Algorithm Press any key to start taking data after the instrument is setup. Rotate the unit in a plane until all data samples are acquired... rotate less than 5ø/sec. Press Q to quit. N NE E SE S SW W NW N ^ ^ ^ ^ ^ Û ********** ************************************************************************** Accumulating data ... Calculating compass performance ... >>> Total error: 2.0ø <<< Press D for details or any other key to continue... >cz Powering Down