2013/09/16 16:19:24 - currents 2.6.32-31-generic #61-Ubuntu SMP Fri Apr 8 18:25:51 UTC 2011 x86_64
2013/09/16 16:19:24 - tk_terminal
2013/09/16 16:19:24 - 16:19:24
2013/09/16 16:19:24 - /dev/ttyUSB0
2013/09/16 16:19:24 - In CruiseSetup.init
2013/09/16 16:19:36 - adcptree.py /home/data/NH1306/proc/nb300 /home/currents/programs -d uhdas --configpath /home/data/NH1306/raw/config --cruisename NH1306
2013/09/16 16:19:37 - uh_progs =  /home/currents/programs
otherdemo is /home/currents/programs/adcp_templates/uhdas_template
making directory /home/data/NH1306/proc/nb300/adcpdb
making directory /home/data/NH1306/proc/nb300/cal
making directory /home/data/NH1306/proc/nb300/cal/watertrk
making directory /home/data/NH1306/proc/nb300/cal/botmtrk
making directory /home/data/NH1306/proc/nb300/cal/heading
making directory /home/data/NH1306/proc/nb300/cal/rotate
making directory /home/data/NH1306/proc/nb300/contour
making directory /home/data/NH1306/proc/nb300/edit
making directory /home/data/NH1306/proc/nb300/grid
making directory /home/data/NH1306/proc/nb300/load
making directory /home/data/NH1306/proc/nb300/nav
making directory /home/data/NH1306/proc/nb300/quality
making directory /home/data/NH1306/proc/nb300/ping
making directory /home/data/NH1306/proc/nb300/scan
making directory /home/data/NH1306/proc/nb300/stick
making directory /home/data/NH1306/proc/nb300/vector


** data type is uhdas
copying additional files for data type uhdas

file exists: not copying vmadcp.def to /home/data/NH1306/proc/nb300/load
 
configpath                       /home/data/NH1306/raw/config
cruisename                       NH1306
datatype                         uhdas
demopath                         /home/currents/programs/adcp_templates/demo
docpath                          /home/currents/programs/adcp_doc
help                             0
instclass                        nb
pingtype                         nb
procdir                          /home/data/NH1306/proc/nb300
uh_progs                         /home/currents/programs
varvals                          0
verbose                          0



config files for raw processing are in /home/data/NH1306/proc/nb300/config
** UHDAS demo data are in /home/currents/programs/q_demos/uhdas/data


(1) writing template text file for processing notes:
     /home/data/NH1306/proc/nb300/template_rpt.txt

(2) creating local web page for documentation

     open this file in your web browser:
     /home/data/NH1306/proc/nb300/adcp_processing.html

done.
2013/09/16 16:19:37 - Entering buildLoggers
2013/09/16 16:19:37 - Created output directory </home/data/NH1306/raw/nb300> with mode 775
2013/09/16 16:19:37 - Created output directory </home/data/NH1306/raw/ashtech> with mode 775
2013/09/16 16:19:37 - Created output directory </home/data/NH1306/raw/gpshead> with mode 775
2013/09/16 16:19:37 - Created output directory </home/data/NH1306/raw/gpsnav> with mode 775
2013/09/16 16:19:37 - >>>> C_ss enabled <<<<<
2013/09/16 16:19:37 - Leaving buildLoggers
2013/09/16 16:19:37 - Start Cruise
2013/09/16 16:19:55 - Ready to destroy_loggers.
2013/09/16 16:19:55 - After destroy_loggers.
2013/09/16 16:19:55 - cp -au /home/adcp/log/* /home/data/NH1306/raw/log/
2013/09/16 16:19:55 - End Cruise
2013/09/16 16:20:06 - adcptree.py /home/data/SP1306/proc/nb300 /home/currents/programs -d uhdas --configpath /home/data/SP1306/raw/config --cruisename SP1306
2013/09/16 16:20:06 - uh_progs =  /home/currents/programs
otherdemo is /home/currents/programs/adcp_templates/uhdas_template
making directory /home/data/SP1306/proc/nb300/adcpdb
making directory /home/data/SP1306/proc/nb300/cal
making directory /home/data/SP1306/proc/nb300/cal/watertrk
making directory /home/data/SP1306/proc/nb300/cal/botmtrk
making directory /home/data/SP1306/proc/nb300/cal/heading
making directory /home/data/SP1306/proc/nb300/cal/rotate
making directory /home/data/SP1306/proc/nb300/contour
making directory /home/data/SP1306/proc/nb300/edit
making directory /home/data/SP1306/proc/nb300/grid
making directory /home/data/SP1306/proc/nb300/load
making directory /home/data/SP1306/proc/nb300/nav
making directory /home/data/SP1306/proc/nb300/quality
making directory /home/data/SP1306/proc/nb300/ping
making directory /home/data/SP1306/proc/nb300/scan
making directory /home/data/SP1306/proc/nb300/stick
making directory /home/data/SP1306/proc/nb300/vector


** data type is uhdas
copying additional files for data type uhdas

file exists: not copying vmadcp.def to /home/data/SP1306/proc/nb300/load
 
configpath                       /home/data/SP1306/raw/config
cruisename                       SP1306
datatype                         uhdas
demopath                         /home/currents/programs/adcp_templates/demo
docpath                          /home/currents/programs/adcp_doc
help                             0
instclass                        nb
pingtype                         nb
procdir                          /home/data/SP1306/proc/nb300
uh_progs                         /home/currents/programs
varvals                          0
verbose                          0



config files for raw processing are in /home/data/SP1306/proc/nb300/config
** UHDAS demo data are in /home/currents/programs/q_demos/uhdas/data


(1) writing template text file for processing notes:
     /home/data/SP1306/proc/nb300/template_rpt.txt

(2) creating local web page for documentation

     open this file in your web browser:
     /home/data/SP1306/proc/nb300/adcp_processing.html

done.
2013/09/16 16:20:07 - Entering buildLoggers
2013/09/16 16:20:07 - Created output directory </home/data/SP1306/raw/nb300> with mode 775
2013/09/16 16:20:07 - Created output directory </home/data/SP1306/raw/ashtech> with mode 775
2013/09/16 16:20:07 - Created output directory </home/data/SP1306/raw/gpshead> with mode 775
2013/09/16 16:20:07 - Created output directory </home/data/SP1306/raw/gpsnav> with mode 775
2013/09/16 16:20:07 - >>>> C_ss enabled <<<<<
2013/09/16 16:20:07 - Leaving buildLoggers
2013/09/16 16:20:07 - Start Cruise
2013/09/17 14:55:56 - enter StartLogging, resume =
2013/09/17 14:55:56 - 0
2013/09/17 14:55:58 - T09171455
2013/09/17 14:55:59 - Z
2013/09/17 14:56:00 - B009001
2013/09/17 14:56:01 - E0004020099
2013/09/17 14:56:02 - P00001
2013/09/17 14:56:03 - P00001
2013/09/17 14:56:03 - Q060
2013/09/17 14:56:04 - L2
2013/09/17 14:56:05 - I04
2013/09/17 14:56:05 - J040
2013/09/17 14:56:06 - FH00255
2013/09/17 14:56:07 - ?
2013/09/17 14:56:07 - F?
2013/09/17 14:56:08 - W064
2013/09/17 14:56:08 - Entering Loggers.start_logging
2013/09/17 14:56:08 - /usr/local/bin/ser_bin -y 2013 -P ttyUSB0 -b 19200 -d /home/data/SP1306/raw/nb300 -i /tmp/SerialLogger/inpipe.ttyUSB0 -o /tmp/SerialLogger/outpipe.ttyUSB0  -T 1379429768  -f sp -F -m 1 -H 2  -e raw -rlE -c -I 2> /tmp/stderr.ttyUSB0 &
2013/09/17 14:56:09 - /usr/local/bin/ser_asc -y 2013 -P ttyUSB1 -b 4800 -d /home/data/SP1306/raw/ashtech -i /tmp/SerialLogger/inpipe.ttyUSB1 -o /tmp/SerialLogger/outpipe.ttyUSB1  -T 1379429768    -f sp -F -m 1 -H 2  -e adu -tc '$GPGGA' '$PASHR,ATT' 2> /tmp/stderr.ttyUSB1 &
2013/09/17 14:56:09 - /usr/local/bin/ser_asc -y 2013 -P ttyUSB2 -b 4800 -d /home/data/SP1306/raw/gpshead -i /tmp/SerialLogger/inpipe.ttyUSB2 -o /tmp/SerialLogger/outpipe.ttyUSB2  -T 1379429768   -f sp -F -m 1 -H 2  -e hdg -tc  '$GPHDT' 2> /tmp/stderr.ttyUSB2 &
2013/09/17 14:56:09 - /usr/local/bin/ser_asc -y 2013 -P ttyUSB3 -b 4800 -d /home/data/SP1306/raw/gpsnav -i /tmp/SerialLogger/inpipe.ttyUSB3 -o /tmp/SerialLogger/outpipe.ttyUSB3  -T 1379429768   -f sp -F -m 1 -H 2  -e gps -tc  '$GPGGA' 2> /tmp/stderr.ttyUSB3 &
2013/09/17 14:56:09 - Leaving Loggers.start_logging
2013/09/17 14:56:09 - Updated SVs_present from SVs and wrote cmds
2013/09/17 14:56:09 - 0
2013/09/17 14:56:09 - Running /home/currents/programs/uhdas/scripts/DAS_while_logging.py
2013/09/17 14:56:09 - Exiting StartLogging
2013/09/18 00:56:53 - Entering StopLogging
2013/09/18 00:56:56 - Loggers.check_stop_logging: all log processes ended
2013/09/18 00:56:58 - Removed /home/adcp/flags/DAS.logging
2013/09/18 00:56:58 - Exiting StopLogging
2013/09/18 00:57:01 - Ready to destroy_loggers.
2013/09/18 00:57:01 - After destroy_loggers.
2013/09/18 00:57:01 - cp -au /home/adcp/log/* /home/data/SP1306/raw/log/
2013/09/18 00:57:01 - End Cruise
2013/09/24 18:51:18 - adcptree.py /home/data/SP1307/proc/nb300 /home/currents/programs -d uhdas --configpath /home/data/SP1307/raw/config --cruisename SP1307
2013/09/24 18:51:18 - uh_progs =  /home/currents/programs
otherdemo is /home/currents/programs/adcp_templates/uhdas_template
making directory /home/data/SP1307/proc/nb300/adcpdb
making directory /home/data/SP1307/proc/nb300/cal
making directory /home/data/SP1307/proc/nb300/cal/watertrk
making directory /home/data/SP1307/proc/nb300/cal/botmtrk
making directory /home/data/SP1307/proc/nb300/cal/heading
making directory /home/data/SP1307/proc/nb300/cal/rotate
making directory /home/data/SP1307/proc/nb300/contour
making directory /home/data/SP1307/proc/nb300/edit
making directory /home/data/SP1307/proc/nb300/grid
making directory /home/data/SP1307/proc/nb300/load
making directory /home/data/SP1307/proc/nb300/nav
making directory /home/data/SP1307/proc/nb300/quality
making directory /home/data/SP1307/proc/nb300/ping
making directory /home/data/SP1307/proc/nb300/scan
making directory /home/data/SP1307/proc/nb300/stick
making directory /home/data/SP1307/proc/nb300/vector


** data type is uhdas
copying additional files for data type uhdas

file exists: not copying vmadcp.def to /home/data/SP1307/proc/nb300/load
 
configpath                       /home/data/SP1307/raw/config
cruisename                       SP1307
datatype                         uhdas
demopath                         /home/currents/programs/adcp_templates/demo
docpath                          /home/currents/programs/adcp_doc
help                             0
instclass                        nb
pingtype                         nb
procdir                          /home/data/SP1307/proc/nb300
uh_progs                         /home/currents/programs
varvals                          0
verbose                          0



config files for raw processing are in /home/data/SP1307/proc/nb300/config
** UHDAS demo data are in /home/currents/programs/q_demos/uhdas/data


(1) writing template text file for processing notes:
     /home/data/SP1307/proc/nb300/template_rpt.txt

(2) creating local web page for documentation

     open this file in your web browser:
     /home/data/SP1307/proc/nb300/adcp_processing.html

done.
2013/09/24 18:51:18 - Entering buildLoggers
2013/09/24 18:51:18 - Created output directory </home/data/SP1307/raw/nb300> with mode 775
2013/09/24 18:51:18 - Created output directory </home/data/SP1307/raw/ashtech> with mode 775
2013/09/24 18:51:18 - Created output directory </home/data/SP1307/raw/gpshead> with mode 775
2013/09/24 18:51:18 - Created output directory </home/data/SP1307/raw/gpsnav> with mode 775
2013/09/24 18:51:18 - >>>> C_ss enabled <<<<<
2013/09/24 18:51:18 - Leaving buildLoggers
2013/09/24 18:51:18 - Start Cruise
2013/09/26 21:42:42 - enter StartLogging, resume =
2013/09/26 21:42:42 - 0
2013/09/26 21:42:45 - T09262142
2013/09/26 21:42:46 - Z
2013/09/26 21:42:46 - B009001
2013/09/26 21:42:47 - E0004020099
2013/09/26 21:42:48 - P00001
2013/09/26 21:42:49 - P00001
2013/09/26 21:42:50 - Q060
2013/09/26 21:42:50 - L2
2013/09/26 21:42:51 - I04
2013/09/26 21:42:52 - J040
2013/09/26 21:42:52 - FH00255
2013/09/26 21:42:53 - ?
2013/09/26 21:42:54 - F?
2013/09/26 21:42:54 - W064
2013/09/26 21:42:55 - Entering Loggers.start_logging
2013/09/26 21:42:55 - /usr/local/bin/ser_bin -y 2013 -P ttyUSB0 -b 19200 -d /home/data/SP1307/raw/nb300 -i /tmp/SerialLogger/inpipe.ttyUSB0 -o /tmp/SerialLogger/outpipe.ttyUSB0  -T 1380231775  -f sp -F -m 1 -H 2  -e raw -rlE -c -I 2> /tmp/stderr.ttyUSB0 &
2013/09/26 21:42:55 - /usr/local/bin/ser_asc -y 2013 -P ttyUSB1 -b 4800 -d /home/data/SP1307/raw/ashtech -i /tmp/SerialLogger/inpipe.ttyUSB1 -o /tmp/SerialLogger/outpipe.ttyUSB1  -T 1380231775    -f sp -F -m 1 -H 2  -e adu -tc '$GPGGA' '$PASHR,ATT' 2> /tmp/stderr.ttyUSB1 &
2013/09/26 21:42:55 - /usr/local/bin/ser_asc -y 2013 -P ttyUSB2 -b 4800 -d /home/data/SP1307/raw/gpshead -i /tmp/SerialLogger/inpipe.ttyUSB2 -o /tmp/SerialLogger/outpipe.ttyUSB2  -T 1380231775   -f sp -F -m 1 -H 2  -e hdg -tc  '$GPHDT' 2> /tmp/stderr.ttyUSB2 &
2013/09/26 21:42:55 - /usr/local/bin/ser_asc -y 2013 -P ttyUSB3 -b 4800 -d /home/data/SP1307/raw/gpsnav -i /tmp/SerialLogger/inpipe.ttyUSB3 -o /tmp/SerialLogger/outpipe.ttyUSB3  -T 1380231775   -f sp -F -m 1 -H 2  -e gps -tc  '$GPGGA' 2> /tmp/stderr.ttyUSB3 &
2013/09/26 21:42:56 - Leaving Loggers.start_logging
2013/09/26 21:42:56 - Updated SVs_present from SVs and wrote cmds
2013/09/26 21:42:56 - 0
2013/09/26 21:42:56 - Running /home/currents/programs/uhdas/scripts/DAS_while_logging.py
2013/09/26 21:42:56 - Exiting StartLogging
2013/10/01 19:42:07 - Entering StopLogging
2013/10/01 19:42:09 - Loggers.check_stop_logging: all log processes ended
2013/10/01 19:42:12 - Removed /home/adcp/flags/DAS.logging
2013/10/01 19:42:12 - Exiting StopLogging
2013/10/01 19:42:17 - Ready to destroy_loggers.
2013/10/01 19:42:17 - After destroy_loggers.
2013/10/01 19:42:17 - cp -au /home/adcp/log/* /home/data/SP1307/raw/log/
2013/10/01 19:42:17 - End Cruise
2013/10/02 20:45:11 - adcptree.py /home/data/SP1308/proc/nb300 /home/currents/programs -d uhdas --configpath /home/data/SP1308/raw/config --cruisename SP1308
2013/10/02 20:45:11 - uh_progs =  /home/currents/programs
otherdemo is /home/currents/programs/adcp_templates/uhdas_template
making directory /home/data/SP1308/proc/nb300/adcpdb
making directory /home/data/SP1308/proc/nb300/cal
making directory /home/data/SP1308/proc/nb300/cal/watertrk
making directory /home/data/SP1308/proc/nb300/cal/botmtrk
making directory /home/data/SP1308/proc/nb300/cal/heading
making directory /home/data/SP1308/proc/nb300/cal/rotate
making directory /home/data/SP1308/proc/nb300/contour
making directory /home/data/SP1308/proc/nb300/edit
making directory /home/data/SP1308/proc/nb300/grid
making directory /home/data/SP1308/proc/nb300/load
making directory /home/data/SP1308/proc/nb300/nav
making directory /home/data/SP1308/proc/nb300/quality
making directory /home/data/SP1308/proc/nb300/ping
making directory /home/data/SP1308/proc/nb300/scan
making directory /home/data/SP1308/proc/nb300/stick
making directory /home/data/SP1308/proc/nb300/vector


** data type is uhdas
copying additional files for data type uhdas

file exists: not copying vmadcp.def to /home/data/SP1308/proc/nb300/load
 
configpath                       /home/data/SP1308/raw/config
cruisename                       SP1308
datatype                         uhdas
demopath                         /home/currents/programs/adcp_templates/demo
docpath                          /home/currents/programs/adcp_doc
help                             0
instclass                        nb
pingtype                         nb
procdir                          /home/data/SP1308/proc/nb300
uh_progs                         /home/currents/programs
varvals                          0
verbose                          0



config files for raw processing are in /home/data/SP1308/proc/nb300/config
** UHDAS demo data are in /home/currents/programs/q_demos/uhdas/data


(1) writing template text file for processing notes:
     /home/data/SP1308/proc/nb300/template_rpt.txt

(2) creating local web page for documentation

     open this file in your web browser:
     /home/data/SP1308/proc/nb300/adcp_processing.html

done.
2013/10/02 20:45:11 - Entering buildLoggers
2013/10/02 20:45:11 - Created output directory </home/data/SP1308/raw/nb300> with mode 775
2013/10/02 20:45:11 - Created output directory </home/data/SP1308/raw/ashtech> with mode 775
2013/10/02 20:45:11 - Created output directory </home/data/SP1308/raw/gpshead> with mode 775
2013/10/02 20:45:11 - Created output directory </home/data/SP1308/raw/gpsnav> with mode 775
2013/10/02 20:45:11 - >>>> C_ss enabled <<<<<
2013/10/02 20:45:11 - Leaving buildLoggers
2013/10/02 20:45:11 - Start Cruise
2013/10/05 03:23:54 - enter StartLogging, resume =
2013/10/05 03:23:54 - 0
2013/10/05 03:23:57 - T10050323
2013/10/05 03:23:58 - Z
2013/10/05 03:23:58 - B009001
2013/10/05 03:23:59 - E0004020099
2013/10/05 03:24:00 - P00001
2013/10/05 03:24:01 - P00001
2013/10/05 03:24:02 - Q060
2013/10/05 03:24:02 - L2
2013/10/05 03:24:03 - I04
2013/10/05 03:24:03 - J040
2013/10/05 03:24:04 - FH00255
2013/10/05 03:24:05 - ?
2013/10/05 03:24:06 - F?
2013/10/05 03:24:06 - W064
2013/10/05 03:24:07 - Entering Loggers.start_logging
2013/10/05 03:24:07 - /usr/local/bin/ser_bin -y 2013 -P ttyUSB0 -b 19200 -d /home/data/SP1308/raw/nb300 -i /tmp/SerialLogger/inpipe.ttyUSB0 -o /tmp/SerialLogger/outpipe.ttyUSB0  -T 1380943447  -f sp -F -m 1 -H 2  -e raw -rlE -c -I 2> /tmp/stderr.ttyUSB0 &
2013/10/05 03:24:07 - /usr/local/bin/ser_asc -y 2013 -P ttyUSB1 -b 4800 -d /home/data/SP1308/raw/ashtech -i /tmp/SerialLogger/inpipe.ttyUSB1 -o /tmp/SerialLogger/outpipe.ttyUSB1  -T 1380943447    -f sp -F -m 1 -H 2  -e adu -tc '$GPGGA' '$PASHR,ATT' 2> /tmp/stderr.ttyUSB1 &
2013/10/05 03:24:07 - /usr/local/bin/ser_asc -y 2013 -P ttyUSB2 -b 4800 -d /home/data/SP1308/raw/gpshead -i /tmp/SerialLogger/inpipe.ttyUSB2 -o /tmp/SerialLogger/outpipe.ttyUSB2  -T 1380943447   -f sp -F -m 1 -H 2  -e hdg -tc  '$GPHDT' 2> /tmp/stderr.ttyUSB2 &
2013/10/05 03:24:08 - /usr/local/bin/ser_asc -y 2013 -P ttyUSB3 -b 4800 -d /home/data/SP1308/raw/gpsnav -i /tmp/SerialLogger/inpipe.ttyUSB3 -o /tmp/SerialLogger/outpipe.ttyUSB3  -T 1380943447   -f sp -F -m 1 -H 2  -e gps -tc  '$GPGGA' 2> /tmp/stderr.ttyUSB3 &
2013/10/05 03:24:08 - Leaving Loggers.start_logging
2013/10/05 03:24:08 - Updated SVs_present from SVs and wrote cmds
2013/10/05 03:24:08 - 0
2013/10/05 03:24:08 - Running /home/currents/programs/uhdas/scripts/DAS_while_logging.py
2013/10/05 03:24:08 - Exiting StartLogging
2013/10/08 13:39:08 - Entering StopLogging
2013/10/08 13:39:11 - Loggers.check_stop_logging: all log processes ended
2013/10/08 13:39:13 - Removed /home/adcp/flags/DAS.logging
2013/10/08 13:39:13 - Exiting StopLogging
2013/10/08 13:39:16 - Ready to destroy_loggers.
2013/10/08 13:39:16 - After destroy_loggers.
2013/10/08 13:39:16 - cp -au /home/adcp/log/* /home/data/SP1308/raw/log/
2013/10/08 13:39:16 - End Cruise
2013/10/15 17:53:42 - adcptree.py /home/data/SP1309/proc/nb300 /home/currents/programs -d uhdas --configpath /home/data/SP1309/raw/config --cruisename SP1309
2013/10/15 17:53:42 - uh_progs =  /home/currents/programs
otherdemo is /home/currents/programs/adcp_templates/uhdas_template
making directory /home/data/SP1309/proc/nb300/adcpdb
making directory /home/data/SP1309/proc/nb300/cal
making directory /home/data/SP1309/proc/nb300/cal/watertrk
making directory /home/data/SP1309/proc/nb300/cal/botmtrk
making directory /home/data/SP1309/proc/nb300/cal/heading
making directory /home/data/SP1309/proc/nb300/cal/rotate
making directory /home/data/SP1309/proc/nb300/contour
making directory /home/data/SP1309/proc/nb300/edit
making directory /home/data/SP1309/proc/nb300/grid
making directory /home/data/SP1309/proc/nb300/load
making directory /home/data/SP1309/proc/nb300/nav
making directory /home/data/SP1309/proc/nb300/quality
making directory /home/data/SP1309/proc/nb300/ping
making directory /home/data/SP1309/proc/nb300/scan
making directory /home/data/SP1309/proc/nb300/stick
making directory /home/data/SP1309/proc/nb300/vector


** data type is uhdas
copying additional files for data type uhdas

file exists: not copying vmadcp.def to /home/data/SP1309/proc/nb300/load
 
configpath                       /home/data/SP1309/raw/config
cruisename                       SP1309
datatype                         uhdas
demopath                         /home/currents/programs/adcp_templates/demo
docpath                          /home/currents/programs/adcp_doc
help                             0
instclass                        nb
pingtype                         nb
procdir                          /home/data/SP1309/proc/nb300
uh_progs                         /home/currents/programs
varvals                          0
verbose                          0



config files for raw processing are in /home/data/SP1309/proc/nb300/config
** UHDAS demo data are in /home/currents/programs/q_demos/uhdas/data


(1) writing template text file for processing notes:
     /home/data/SP1309/proc/nb300/template_rpt.txt

(2) creating local web page for documentation

     open this file in your web browser:
     /home/data/SP1309/proc/nb300/adcp_processing.html

done.
2013/10/15 17:53:43 - Entering buildLoggers
2013/10/15 17:53:43 - Created output directory </home/data/SP1309/raw/nb300> with mode 775
2013/10/15 17:53:43 - Created output directory </home/data/SP1309/raw/ashtech> with mode 775
2013/10/15 17:53:43 - Created output directory </home/data/SP1309/raw/gpshead> with mode 775
2013/10/15 17:53:43 - Created output directory </home/data/SP1309/raw/gpsnav> with mode 775
2013/10/15 17:53:43 - >>>> C_ss enabled <<<<<
2013/10/15 17:53:43 - Leaving buildLoggers
2013/10/15 17:53:43 - Start Cruise
2013/10/16 14:48:39 - enter StartLogging, resume =
2013/10/16 14:48:39 - 0
2013/10/16 14:48:42 - T10161448
2013/10/16 14:48:43 - Z
2013/10/16 14:48:43 - B009001
2013/10/16 14:48:44 - E0004020099
2013/10/16 14:48:45 - P00001
2013/10/16 14:48:46 - P00001
2013/10/16 14:48:47 - Q060
2013/10/16 14:48:47 - L2
2013/10/16 14:48:48 - I04
2013/10/16 14:48:48 - J040
2013/10/16 14:48:49 - FH00255
2013/10/16 14:48:50 - ?
2013/10/16 14:48:50 - F?
2013/10/16 14:48:51 - W064
2013/10/16 14:48:52 - Entering Loggers.start_logging
2013/10/16 14:48:52 - /usr/local/bin/ser_bin -y 2013 -P ttyUSB0 -b 19200 -d /home/data/SP1309/raw/nb300 -i /tmp/SerialLogger/inpipe.ttyUSB0 -o /tmp/SerialLogger/outpipe.ttyUSB0  -T 1381934932  -f sp -F -m 1 -H 2  -e raw -rlE -c -I 2> /tmp/stderr.ttyUSB0 &
2013/10/16 14:48:52 - /usr/local/bin/ser_asc -y 2013 -P ttyUSB1 -b 4800 -d /home/data/SP1309/raw/ashtech -i /tmp/SerialLogger/inpipe.ttyUSB1 -o /tmp/SerialLogger/outpipe.ttyUSB1  -T 1381934932    -f sp -F -m 1 -H 2  -e adu -tc '$GPGGA' '$PASHR,ATT' 2> /tmp/stderr.ttyUSB1 &
2013/10/16 14:48:52 - /usr/local/bin/ser_asc -y 2013 -P ttyUSB2 -b 4800 -d /home/data/SP1309/raw/gpshead -i /tmp/SerialLogger/inpipe.ttyUSB2 -o /tmp/SerialLogger/outpipe.ttyUSB2  -T 1381934932   -f sp -F -m 1 -H 2  -e hdg -tc  '$GPHDT' 2> /tmp/stderr.ttyUSB2 &
2013/10/16 14:48:52 - /usr/local/bin/ser_asc -y 2013 -P ttyUSB3 -b 4800 -d /home/data/SP1309/raw/gpsnav -i /tmp/SerialLogger/inpipe.ttyUSB3 -o /tmp/SerialLogger/outpipe.ttyUSB3  -T 1381934932   -f sp -F -m 1 -H 2  -e gps -tc  '$GPGGA' 2> /tmp/stderr.ttyUSB3 &
2013/10/16 14:48:53 - Leaving Loggers.start_logging
2013/10/16 14:48:53 - Updated SVs_present from SVs and wrote cmds
2013/10/16 14:48:53 - 0
2013/10/16 14:48:53 - Running /home/currents/programs/uhdas/scripts/DAS_while_logging.py
2013/10/16 14:48:53 - Exiting StartLogging
2013/10/17 01:35:27 - Entering StopLogging
2013/10/17 01:35:33 - Loggers.check_stop_logging: all log processes ended
2013/10/17 01:35:36 - Removed /home/adcp/flags/DAS.logging
2013/10/17 01:35:36 - Exiting StopLogging
2013/10/17 01:35:40 - Ready to destroy_loggers.
2013/10/17 01:35:40 - After destroy_loggers.
2013/10/17 01:35:40 - cp -au /home/adcp/log/* /home/data/SP1309/raw/log/
2013/10/17 01:35:40 - End Cruise
2013/10/18 16:56:41 - adcptree.py /home/data/SP1310/proc/nb300 /home/currents/programs -d uhdas --configpath /home/data/SP1310/raw/config --cruisename SP1310
2013/10/18 16:56:41 - uh_progs =  /home/currents/programs
otherdemo is /home/currents/programs/adcp_templates/uhdas_template
making directory /home/data/SP1310/proc/nb300/adcpdb
making directory /home/data/SP1310/proc/nb300/cal
making directory /home/data/SP1310/proc/nb300/cal/watertrk
making directory /home/data/SP1310/proc/nb300/cal/botmtrk
making directory /home/data/SP1310/proc/nb300/cal/heading
making directory /home/data/SP1310/proc/nb300/cal/rotate
making directory /home/data/SP1310/proc/nb300/contour
making directory /home/data/SP1310/proc/nb300/edit
making directory /home/data/SP1310/proc/nb300/grid
making directory /home/data/SP1310/proc/nb300/load
making directory /home/data/SP1310/proc/nb300/nav
making directory /home/data/SP1310/proc/nb300/quality
making directory /home/data/SP1310/proc/nb300/ping
making directory /home/data/SP1310/proc/nb300/scan
making directory /home/data/SP1310/proc/nb300/stick
making directory /home/data/SP1310/proc/nb300/vector


** data type is uhdas
copying additional files for data type uhdas

file exists: not copying vmadcp.def to /home/data/SP1310/proc/nb300/load
 
configpath                       /home/data/SP1310/raw/config
cruisename                       SP1310
datatype                         uhdas
demopath                         /home/currents/programs/adcp_templates/demo
docpath                          /home/currents/programs/adcp_doc
help                             0
instclass                        nb
pingtype                         nb
procdir                          /home/data/SP1310/proc/nb300
uh_progs                         /home/currents/programs
varvals                          0
verbose                          0



config files for raw processing are in /home/data/SP1310/proc/nb300/config
** UHDAS demo data are in /home/currents/programs/q_demos/uhdas/data


(1) writing template text file for processing notes:
     /home/data/SP1310/proc/nb300/template_rpt.txt

(2) creating local web page for documentation

     open this file in your web browser:
     /home/data/SP1310/proc/nb300/adcp_processing.html

done.
2013/10/18 16:56:42 - Entering buildLoggers
2013/10/18 16:56:42 - Created output directory </home/data/SP1310/raw/nb300> with mode 775
2013/10/18 16:56:42 - Created output directory </home/data/SP1310/raw/ashtech> with mode 775
2013/10/18 16:56:42 - Created output directory </home/data/SP1310/raw/gpshead> with mode 775
2013/10/18 16:56:42 - Created output directory </home/data/SP1310/raw/gpsnav> with mode 775
2013/10/18 16:56:42 - >>>> C_ss enabled <<<<<
2013/10/18 16:56:42 - Leaving buildLoggers
2013/10/18 16:56:42 - Start Cruise
2013/10/19 14:12:17 - enter StartLogging, resume =
2013/10/19 14:12:17 - 0
2013/10/19 14:12:19 - T10191412
2013/10/19 14:12:20 - Z
2013/10/19 14:12:20 - B009001
2013/10/19 14:12:21 - E0004020099
2013/10/19 14:12:22 - P00001
2013/10/19 14:12:23 - P00001
2013/10/19 14:12:24 - Q060
2013/10/19 14:12:24 - L2
2013/10/19 14:12:25 - I04
2013/10/19 14:12:26 - J040
2013/10/19 14:12:26 - FH00255
2013/10/19 14:12:27 - ?
2013/10/19 14:12:28 - F?
2013/10/19 14:12:28 - W064
2013/10/19 14:12:29 - Entering Loggers.start_logging
2013/10/19 14:12:29 - /usr/local/bin/ser_bin -y 2013 -P ttyUSB0 -b 19200 -d /home/data/SP1310/raw/nb300 -i /tmp/SerialLogger/inpipe.ttyUSB0 -o /tmp/SerialLogger/outpipe.ttyUSB0  -T 1382191949  -f sp -F -m 1 -H 2  -e raw -rlE -c -I 2> /tmp/stderr.ttyUSB0 &
2013/10/19 14:12:29 - /usr/local/bin/ser_asc -y 2013 -P ttyUSB1 -b 4800 -d /home/data/SP1310/raw/ashtech -i /tmp/SerialLogger/inpipe.ttyUSB1 -o /tmp/SerialLogger/outpipe.ttyUSB1  -T 1382191949    -f sp -F -m 1 -H 2  -e adu -tc '$GPGGA' '$PASHR,ATT' 2> /tmp/stderr.ttyUSB1 &
2013/10/19 14:12:29 - /usr/local/bin/ser_asc -y 2013 -P ttyUSB2 -b 4800 -d /home/data/SP1310/raw/gpshead -i /tmp/SerialLogger/inpipe.ttyUSB2 -o /tmp/SerialLogger/outpipe.ttyUSB2  -T 1382191949   -f sp -F -m 1 -H 2  -e hdg -tc  '$GPHDT' 2> /tmp/stderr.ttyUSB2 &
2013/10/19 14:12:30 - /usr/local/bin/ser_asc -y 2013 -P ttyUSB3 -b 4800 -d /home/data/SP1310/raw/gpsnav -i /tmp/SerialLogger/inpipe.ttyUSB3 -o /tmp/SerialLogger/outpipe.ttyUSB3  -T 1382191949   -f sp -F -m 1 -H 2  -e gps -tc  '$GPGGA' 2> /tmp/stderr.ttyUSB3 &
2013/10/19 14:12:30 - Leaving Loggers.start_logging
2013/10/19 14:12:30 - Updated SVs_present from SVs and wrote cmds
2013/10/19 14:12:30 - 0
2013/10/19 14:12:30 - Running /home/currents/programs/uhdas/scripts/DAS_while_logging.py
2013/10/19 14:12:30 - Exiting StartLogging
2013/10/20 00:25:25 - Entering StopLogging
2013/10/20 00:25:30 - Loggers.check_stop_logging: all log processes ended
2013/10/20 00:25:33 - Removed /home/adcp/flags/DAS.logging
2013/10/20 00:25:33 - Exiting StopLogging
2013/10/20 15:34:15 - enter StartLogging, resume =
2013/10/20 15:34:15 - 0
2013/10/20 15:34:18 - T10201534
2013/10/20 15:34:19 - Z
2013/10/20 15:34:19 - B009001
2013/10/20 15:34:20 - E0004020099
2013/10/20 15:34:21 - P00001
2013/10/20 15:34:22 - P00001
2013/10/20 15:34:23 - Q060
2013/10/20 15:34:23 - L2
2013/10/20 15:34:24 - I04
2013/10/20 15:34:24 - J040
2013/10/20 15:34:25 - FH00255
2013/10/20 15:34:26 - ?
2013/10/20 15:34:27 - F?
2013/10/20 15:34:27 - W064
2013/10/20 15:34:28 - Entering Loggers.start_logging
2013/10/20 15:34:28 - /usr/local/bin/ser_bin -y 2013 -P ttyUSB0 -b 19200 -d /home/data/SP1310/raw/nb300 -i /tmp/SerialLogger/inpipe.ttyUSB0 -o /tmp/SerialLogger/outpipe.ttyUSB0  -T 1382283268  -f sp -F -m 1 -H 2  -e raw -rlE -c -I 2> /tmp/stderr.ttyUSB0 &
2013/10/20 15:34:28 - /usr/local/bin/ser_asc -y 2013 -P ttyUSB1 -b 4800 -d /home/data/SP1310/raw/ashtech -i /tmp/SerialLogger/inpipe.ttyUSB1 -o /tmp/SerialLogger/outpipe.ttyUSB1  -T 1382283268    -f sp -F -m 1 -H 2  -e adu -tc '$GPGGA' '$PASHR,ATT' 2> /tmp/stderr.ttyUSB1 &
2013/10/20 15:34:28 - /usr/local/bin/ser_asc -y 2013 -P ttyUSB2 -b 4800 -d /home/data/SP1310/raw/gpshead -i /tmp/SerialLogger/inpipe.ttyUSB2 -o /tmp/SerialLogger/outpipe.ttyUSB2  -T 1382283268   -f sp -F -m 1 -H 2  -e hdg -tc  '$GPHDT' 2> /tmp/stderr.ttyUSB2 &
2013/10/20 15:34:28 - /usr/local/bin/ser_asc -y 2013 -P ttyUSB3 -b 4800 -d /home/data/SP1310/raw/gpsnav -i /tmp/SerialLogger/inpipe.ttyUSB3 -o /tmp/SerialLogger/outpipe.ttyUSB3  -T 1382283268   -f sp -F -m 1 -H 2  -e gps -tc  '$GPGGA' 2> /tmp/stderr.ttyUSB3 &
2013/10/20 15:34:29 - Leaving Loggers.start_logging
2013/10/20 15:34:29 - Updated SVs_present from SVs and wrote cmds
2013/10/20 15:34:29 - 0
2013/10/20 15:34:29 - Running /home/currents/programs/uhdas/scripts/DAS_while_logging.py
2013/10/20 15:34:29 - Exiting StartLogging
2013/10/20 22:00:21 - Entering StopLogging
2013/10/20 22:00:24 - Loggers.check_stop_logging: all log processes ended
2013/10/20 22:00:27 - Removed /home/adcp/flags/DAS.logging
2013/10/20 22:00:27 - Exiting StopLogging
2013/10/20 22:00:33 - Ready to destroy_loggers.
2013/10/20 22:00:33 - After destroy_loggers.
2013/10/20 22:00:33 - cp -au /home/adcp/log/* /home/data/SP1310/raw/log/
2013/10/20 22:00:33 - End Cruise
2013/10/21 19:40:48 - adcptree.py /home/data/SP1311/proc/nb300 /home/currents/programs -d uhdas --configpath /home/data/SP1311/raw/config --cruisename SP1311
2013/10/21 19:40:48 - uh_progs =  /home/currents/programs
otherdemo is /home/currents/programs/adcp_templates/uhdas_template
making directory /home/data/SP1311/proc/nb300/adcpdb
making directory /home/data/SP1311/proc/nb300/cal
making directory /home/data/SP1311/proc/nb300/cal/watertrk
making directory /home/data/SP1311/proc/nb300/cal/botmtrk
making directory /home/data/SP1311/proc/nb300/cal/heading
making directory /home/data/SP1311/proc/nb300/cal/rotate
making directory /home/data/SP1311/proc/nb300/contour
making directory /home/data/SP1311/proc/nb300/edit
making directory /home/data/SP1311/proc/nb300/grid
making directory /home/data/SP1311/proc/nb300/load
making directory /home/data/SP1311/proc/nb300/nav
making directory /home/data/SP1311/proc/nb300/quality
making directory /home/data/SP1311/proc/nb300/ping
making directory /home/data/SP1311/proc/nb300/scan
making directory /home/data/SP1311/proc/nb300/stick
making directory /home/data/SP1311/proc/nb300/vector


** data type is uhdas
copying additional files for data type uhdas

file exists: not copying vmadcp.def to /home/data/SP1311/proc/nb300/load
 
configpath                       /home/data/SP1311/raw/config
cruisename                       SP1311
datatype                         uhdas
demopath                         /home/currents/programs/adcp_templates/demo
docpath                          /home/currents/programs/adcp_doc
help                             0
instclass                        nb
pingtype                         nb
procdir                          /home/data/SP1311/proc/nb300
uh_progs                         /home/currents/programs
varvals                          0
verbose                          0



config files for raw processing are in /home/data/SP1311/proc/nb300/config
** UHDAS demo data are in /home/currents/programs/q_demos/uhdas/data


(1) writing template text file for processing notes:
     /home/data/SP1311/proc/nb300/template_rpt.txt

(2) creating local web page for documentation

     open this file in your web browser:
     /home/data/SP1311/proc/nb300/adcp_processing.html

done.
2013/10/21 19:40:48 - Entering buildLoggers
2013/10/21 19:40:48 - Created output directory </home/data/SP1311/raw/nb300> with mode 775
2013/10/21 19:40:48 - Created output directory </home/data/SP1311/raw/ashtech> with mode 775
2013/10/21 19:40:48 - Created output directory </home/data/SP1311/raw/gpshead> with mode 775
2013/10/21 19:40:48 - Created output directory </home/data/SP1311/raw/gpsnav> with mode 775
2013/10/21 19:40:48 - >>>> C_ss enabled <<<<<
2013/10/21 19:40:48 - Leaving buildLoggers
2013/10/21 19:40:48 - Start Cruise
2013/10/24 01:59:56 - enter StartLogging, resume =
2013/10/24 01:59:56 - 0
2013/10/24 01:59:58 - T10240159
2013/10/24 01:59:59 - Z
2013/10/24 02:00:00 - B009001
2013/10/24 02:00:01 - E0004020099
2013/10/24 02:00:02 - P00001
2013/10/24 02:00:02 - P00001
2013/10/24 02:00:03 - Q060
2013/10/24 02:00:04 - L2
2013/10/24 02:00:04 - I04
2013/10/24 02:00:05 - J040
2013/10/24 02:00:06 - FH00255
2013/10/24 02:00:06 - ?
2013/10/24 02:00:07 - F?
2013/10/24 02:00:08 - W064
2013/10/24 02:00:08 - Entering Loggers.start_logging
2013/10/24 02:00:08 - /usr/local/bin/ser_bin -y 2013 -P ttyUSB0 -b 19200 -d /home/data/SP1311/raw/nb300 -i /tmp/SerialLogger/inpipe.ttyUSB0 -o /tmp/SerialLogger/outpipe.ttyUSB0  -T 1382580008  -f sp -F -m 1 -H 2  -e raw -rlE -c -I 2> /tmp/stderr.ttyUSB0 &
2013/10/24 02:00:08 - /usr/local/bin/ser_asc -y 2013 -P ttyUSB1 -b 4800 -d /home/data/SP1311/raw/ashtech -i /tmp/SerialLogger/inpipe.ttyUSB1 -o /tmp/SerialLogger/outpipe.ttyUSB1  -T 1382580008    -f sp -F -m 1 -H 2  -e adu -tc '$GPGGA' '$PASHR,ATT' 2> /tmp/stderr.ttyUSB1 &
2013/10/24 02:00:09 - /usr/local/bin/ser_asc -y 2013 -P ttyUSB2 -b 4800 -d /home/data/SP1311/raw/gpshead -i /tmp/SerialLogger/inpipe.ttyUSB2 -o /tmp/SerialLogger/outpipe.ttyUSB2  -T 1382580008   -f sp -F -m 1 -H 2  -e hdg -tc  '$GPHDT' 2> /tmp/stderr.ttyUSB2 &
2013/10/24 02:00:09 - /usr/local/bin/ser_asc -y 2013 -P ttyUSB3 -b 4800 -d /home/data/SP1311/raw/gpsnav -i /tmp/SerialLogger/inpipe.ttyUSB3 -o /tmp/SerialLogger/outpipe.ttyUSB3  -T 1382580008   -f sp -F -m 1 -H 2  -e gps -tc  '$GPGGA' 2> /tmp/stderr.ttyUSB3 &
2013/10/24 02:00:09 - Leaving Loggers.start_logging
2013/10/24 02:00:09 - Updated SVs_present from SVs and wrote cmds
2013/10/24 02:00:09 - 0
2013/10/24 02:00:09 - Running /home/currents/programs/uhdas/scripts/DAS_while_logging.py
2013/10/24 02:00:09 - Exiting StartLogging
2013/10/25 12:54:51 - Entering StopLogging
2013/10/25 12:54:54 - Loggers.check_stop_logging: all log processes ended
2013/10/25 12:54:57 - Removed /home/adcp/flags/DAS.logging
2013/10/25 12:54:57 - Exiting StopLogging
2013/10/25 12:55:05 - Ready to destroy_loggers.
2013/10/25 12:55:05 - After destroy_loggers.
2013/10/25 12:55:05 - cp -au /home/adcp/log/* /home/data/SP1311/raw/log/
2013/10/25 12:55:05 - End Cruise
2013/11/04 21:26:49 - adcptree.py /home/data/SP1312/proc/nb300 /home/currents/programs -d uhdas --configpath /home/data/SP1312/raw/config --cruisename SP1312
2013/11/04 21:26:49 - uh_progs =  /home/currents/programs
otherdemo is /home/currents/programs/adcp_templates/uhdas_template
making directory /home/data/SP1312/proc/nb300/adcpdb
making directory /home/data/SP1312/proc/nb300/cal
making directory /home/data/SP1312/proc/nb300/cal/watertrk
making directory /home/data/SP1312/proc/nb300/cal/botmtrk
making directory /home/data/SP1312/proc/nb300/cal/heading
making directory /home/data/SP1312/proc/nb300/cal/rotate
making directory /home/data/SP1312/proc/nb300/contour
making directory /home/data/SP1312/proc/nb300/edit
making directory /home/data/SP1312/proc/nb300/grid
making directory /home/data/SP1312/proc/nb300/load
making directory /home/data/SP1312/proc/nb300/nav
making directory /home/data/SP1312/proc/nb300/quality
making directory /home/data/SP1312/proc/nb300/ping
making directory /home/data/SP1312/proc/nb300/scan
making directory /home/data/SP1312/proc/nb300/stick
making directory /home/data/SP1312/proc/nb300/vector


** data type is uhdas
copying additional files for data type uhdas

file exists: not copying vmadcp.def to /home/data/SP1312/proc/nb300/load
 
configpath                       /home/data/SP1312/raw/config
cruisename                       SP1312
datatype                         uhdas
demopath                         /home/currents/programs/adcp_templates/demo
docpath                          /home/currents/programs/adcp_doc
help                             0
instclass                        nb
pingtype                         nb
procdir                          /home/data/SP1312/proc/nb300
uh_progs                         /home/currents/programs
varvals                          0
verbose                          0



config files for raw processing are in /home/data/SP1312/proc/nb300/config
** UHDAS demo data are in /home/currents/programs/q_demos/uhdas/data


(1) writing template text file for processing notes:
     /home/data/SP1312/proc/nb300/template_rpt.txt

(2) creating local web page for documentation

     open this file in your web browser:
     /home/data/SP1312/proc/nb300/adcp_processing.html

done.
2013/11/04 21:26:49 - Entering buildLoggers
2013/11/04 21:26:49 - Created output directory </home/data/SP1312/raw/nb300> with mode 775
2013/11/04 21:26:49 - Created output directory </home/data/SP1312/raw/ashtech> with mode 775
2013/11/04 21:26:49 - Created output directory </home/data/SP1312/raw/gpshead> with mode 775
2013/11/04 21:26:49 - Created output directory </home/data/SP1312/raw/gpsnav> with mode 775
2013/11/04 21:26:49 - >>>> C_ss enabled <<<<<
2013/11/04 21:26:49 - Leaving buildLoggers
2013/11/04 21:26:49 - Start Cruise
2013/11/06 01:37:10 - enter StartLogging, resume =
2013/11/06 01:37:10 - 0
2013/11/06 01:37:13 - T11060137
2013/11/06 01:37:14 - Z
2013/11/06 01:37:14 - B009001
2013/11/06 01:37:15 - E0004020099
2013/11/06 01:37:16 - P00001
2013/11/06 01:37:17 - P00001
2013/11/06 01:37:18 - Q060
2013/11/06 01:37:18 - L2
2013/11/06 01:37:19 - I04
2013/11/06 01:37:20 - J040
2013/11/06 01:37:20 - FH00255
2013/11/06 01:37:21 - ?
2013/11/06 01:37:22 - F?
2013/11/06 01:37:22 - W064
2013/11/06 01:37:23 - Entering Loggers.start_logging
2013/11/06 01:37:23 - /usr/local/bin/ser_bin -y 2013 -P ttyUSB0 -b 19200 -d /home/data/SP1312/raw/nb300 -i /tmp/SerialLogger/inpipe.ttyUSB0 -o /tmp/SerialLogger/outpipe.ttyUSB0  -T 1383701843  -f sp -F -m 1 -H 2  -e raw -rlE -c -I 2> /tmp/stderr.ttyUSB0 &
2013/11/06 01:37:23 - /usr/local/bin/ser_asc -y 2013 -P ttyUSB1 -b 4800 -d /home/data/SP1312/raw/ashtech -i /tmp/SerialLogger/inpipe.ttyUSB1 -o /tmp/SerialLogger/outpipe.ttyUSB1  -T 1383701843    -f sp -F -m 1 -H 2  -e adu -tc '$GPGGA' '$PASHR,ATT' 2> /tmp/stderr.ttyUSB1 &
2013/11/06 01:37:23 - /usr/local/bin/ser_asc -y 2013 -P ttyUSB2 -b 4800 -d /home/data/SP1312/raw/gpshead -i /tmp/SerialLogger/inpipe.ttyUSB2 -o /tmp/SerialLogger/outpipe.ttyUSB2  -T 1383701843   -f sp -F -m 1 -H 2  -e hdg -tc  '$GPHDT' 2> /tmp/stderr.ttyUSB2 &
2013/11/06 01:37:24 - /usr/local/bin/ser_asc -y 2013 -P ttyUSB3 -b 4800 -d /home/data/SP1312/raw/gpsnav -i /tmp/SerialLogger/inpipe.ttyUSB3 -o /tmp/SerialLogger/outpipe.ttyUSB3  -T 1383701843   -f sp -F -m 1 -H 2  -e gps -tc  '$GPGGA' 2> /tmp/stderr.ttyUSB3 &
2013/11/06 01:37:24 - Leaving Loggers.start_logging
2013/11/06 01:37:24 - Updated SVs_present from SVs and wrote cmds
2013/11/06 01:37:24 - 0
2013/11/06 01:37:24 - Running /home/currents/programs/uhdas/scripts/DAS_while_logging.py
2013/11/06 01:37:24 - Exiting StartLogging
2013/11/08 13:09:22 - Entering StopLogging
2013/11/08 13:09:28 - Loggers.check_stop_logging: all log processes ended
2013/11/08 13:09:31 - Removed /home/adcp/flags/DAS.logging
2013/11/08 13:09:31 - Exiting StopLogging
2013/11/08 13:09:46 - Ready to destroy_loggers.
2013/11/08 13:09:46 - After destroy_loggers.
2013/11/08 13:09:46 - cp -au /home/adcp/log/* /home/data/SP1312/raw/log/
2013/11/08 13:09:46 - End Cruise
2013/11/14 20:02:38 - adcptree.py /home/data/SP1313/proc/nb300 /home/currents/programs -d uhdas --configpath /home/data/SP1313/raw/config --cruisename SP1313
2013/11/14 20:02:38 - uh_progs =  /home/currents/programs
otherdemo is /home/currents/programs/adcp_templates/uhdas_template
making directory /home/data/SP1313/proc/nb300/adcpdb
making directory /home/data/SP1313/proc/nb300/cal
making directory /home/data/SP1313/proc/nb300/cal/watertrk
making directory /home/data/SP1313/proc/nb300/cal/botmtrk
making directory /home/data/SP1313/proc/nb300/cal/heading
making directory /home/data/SP1313/proc/nb300/cal/rotate
making directory /home/data/SP1313/proc/nb300/contour
making directory /home/data/SP1313/proc/nb300/edit
making directory /home/data/SP1313/proc/nb300/grid
making directory /home/data/SP1313/proc/nb300/load
making directory /home/data/SP1313/proc/nb300/nav
making directory /home/data/SP1313/proc/nb300/quality
making directory /home/data/SP1313/proc/nb300/ping
making directory /home/data/SP1313/proc/nb300/scan
making directory /home/data/SP1313/proc/nb300/stick
making directory /home/data/SP1313/proc/nb300/vector


** data type is uhdas
copying additional files for data type uhdas

file exists: not copying vmadcp.def to /home/data/SP1313/proc/nb300/load
 
configpath                       /home/data/SP1313/raw/config
cruisename                       SP1313
datatype                         uhdas
demopath                         /home/currents/programs/adcp_templates/demo
docpath                          /home/currents/programs/adcp_doc
help                             0
instclass                        nb
pingtype                         nb
procdir                          /home/data/SP1313/proc/nb300
uh_progs                         /home/currents/programs
varvals                          0
verbose                          0



config files for raw processing are in /home/data/SP1313/proc/nb300/config
** UHDAS demo data are in /home/currents/programs/q_demos/uhdas/data


(1) writing template text file for processing notes:
     /home/data/SP1313/proc/nb300/template_rpt.txt

(2) creating local web page for documentation

     open this file in your web browser:
     /home/data/SP1313/proc/nb300/adcp_processing.html

done.
2013/11/14 20:02:39 - Entering buildLoggers
2013/11/14 20:02:39 - Created output directory </home/data/SP1313/raw/nb300> with mode 775
2013/11/14 20:02:39 - Created output directory </home/data/SP1313/raw/ashtech> with mode 775
2013/11/14 20:02:39 - Created output directory </home/data/SP1313/raw/gpshead> with mode 775
2013/11/14 20:02:39 - Created output directory </home/data/SP1313/raw/gpsnav> with mode 775
2013/11/14 20:02:39 - >>>> C_ss enabled <<<<<
2013/11/14 20:02:39 - Leaving buildLoggers
2013/11/14 20:02:39 - Start Cruise
2013/11/16 14:57:38 - enter StartLogging, resume =
2013/11/16 14:57:38 - 0
2013/11/16 14:57:41 - T11161457
2013/11/16 14:57:42 - Z
2013/11/16 14:57:42 - B009001
2013/11/16 14:57:43 - E0004020099
2013/11/16 14:57:44 - P00001
2013/11/16 14:57:45 - P00001
2013/11/16 14:57:46 - Q060
2013/11/16 14:57:46 - L2
2013/11/16 14:57:47 - I04
2013/11/16 14:57:48 - J040
2013/11/16 14:57:48 - FH00255
2013/11/16 14:57:49 - ?
2013/11/16 14:57:50 - F?
2013/11/16 14:57:50 - W064
2013/11/16 14:57:51 - Entering Loggers.start_logging
2013/11/16 14:57:51 - /usr/local/bin/ser_bin -y 2013 -P ttyUSB0 -b 19200 -d /home/data/SP1313/raw/nb300 -i /tmp/SerialLogger/inpipe.ttyUSB0 -o /tmp/SerialLogger/outpipe.ttyUSB0  -T 1384613871  -f sp -F -m 1 -H 2  -e raw -rlE -c -I 2> /tmp/stderr.ttyUSB0 &
2013/11/16 14:57:51 - /usr/local/bin/ser_asc -y 2013 -P ttyUSB1 -b 4800 -d /home/data/SP1313/raw/ashtech -i /tmp/SerialLogger/inpipe.ttyUSB1 -o /tmp/SerialLogger/outpipe.ttyUSB1  -T 1384613871    -f sp -F -m 1 -H 2  -e adu -tc '$GPGGA' '$PASHR,ATT' 2> /tmp/stderr.ttyUSB1 &
2013/11/16 14:57:51 - /usr/local/bin/ser_asc -y 2013 -P ttyUSB2 -b 4800 -d /home/data/SP1313/raw/gpshead -i /tmp/SerialLogger/inpipe.ttyUSB2 -o /tmp/SerialLogger/outpipe.ttyUSB2  -T 1384613871   -f sp -F -m 1 -H 2  -e hdg -tc  '$GPHDT' 2> /tmp/stderr.ttyUSB2 &
2013/11/16 14:57:51 - /usr/local/bin/ser_asc -y 2013 -P ttyUSB3 -b 4800 -d /home/data/SP1313/raw/gpsnav -i /tmp/SerialLogger/inpipe.ttyUSB3 -o /tmp/SerialLogger/outpipe.ttyUSB3  -T 1384613871   -f sp -F -m 1 -H 2  -e gps -tc  '$GPGGA' 2> /tmp/stderr.ttyUSB3 &
2013/11/16 14:57:52 - Leaving Loggers.start_logging
2013/11/16 14:57:52 - Updated SVs_present from SVs and wrote cmds
2013/11/16 14:57:52 - 0
2013/11/16 14:57:52 - Running /home/currents/programs/uhdas/scripts/DAS_while_logging.py
2013/11/16 14:57:52 - Exiting StartLogging
2013/11/17 04:07:06 - Entering StopLogging
2013/11/17 04:07:10 - Loggers.check_stop_logging: all log processes ended
2013/11/17 04:07:12 - Removed /home/adcp/flags/DAS.logging
2013/11/17 04:07:12 - Exiting StopLogging
2013/11/18 23:01:28 - Ready to destroy_loggers.
2013/11/18 23:01:28 - After destroy_loggers.
2013/11/18 23:01:28 - cp -au /home/adcp/log/* /home/data/SP1313/raw/log/
2013/11/18 23:01:28 - End Cruise
2013/11/22 00:00:57 - adcptree.py /home/data/SP1314/proc/nb300 /home/currents/programs -d uhdas --configpath /home/data/SP1314/raw/config --cruisename SP1314
2013/11/22 00:00:57 - uh_progs =  /home/currents/programs
otherdemo is /home/currents/programs/adcp_templates/uhdas_template
making directory /home/data/SP1314/proc/nb300/adcpdb
making directory /home/data/SP1314/proc/nb300/cal
making directory /home/data/SP1314/proc/nb300/cal/watertrk
making directory /home/data/SP1314/proc/nb300/cal/botmtrk
making directory /home/data/SP1314/proc/nb300/cal/heading
making directory /home/data/SP1314/proc/nb300/cal/rotate
making directory /home/data/SP1314/proc/nb300/contour
making directory /home/data/SP1314/proc/nb300/edit
making directory /home/data/SP1314/proc/nb300/grid
making directory /home/data/SP1314/proc/nb300/load
making directory /home/data/SP1314/proc/nb300/nav
making directory /home/data/SP1314/proc/nb300/quality
making directory /home/data/SP1314/proc/nb300/ping
making directory /home/data/SP1314/proc/nb300/scan
making directory /home/data/SP1314/proc/nb300/stick
making directory /home/data/SP1314/proc/nb300/vector


** data type is uhdas
copying additional files for data type uhdas

file exists: not copying vmadcp.def to /home/data/SP1314/proc/nb300/load
 
configpath                       /home/data/SP1314/raw/config
cruisename                       SP1314
datatype                         uhdas
demopath                         /home/currents/programs/adcp_templates/demo
docpath                          /home/currents/programs/adcp_doc
help                             0
instclass                        nb
pingtype                         nb
procdir                          /home/data/SP1314/proc/nb300
uh_progs                         /home/currents/programs
varvals                          0
verbose                          0



config files for raw processing are in /home/data/SP1314/proc/nb300/config
** UHDAS demo data are in /home/currents/programs/q_demos/uhdas/data


(1) writing template text file for processing notes:
     /home/data/SP1314/proc/nb300/template_rpt.txt

(2) creating local web page for documentation

     open this file in your web browser:
     /home/data/SP1314/proc/nb300/adcp_processing.html

done.
2013/11/22 00:00:57 - Entering buildLoggers
2013/11/22 00:00:57 - Created output directory </home/data/SP1314/raw/nb300> with mode 775
2013/11/22 00:00:57 - Created output directory </home/data/SP1314/raw/ashtech> with mode 775
2013/11/22 00:00:57 - Created output directory </home/data/SP1314/raw/gpshead> with mode 775
2013/11/22 00:00:57 - Created output directory </home/data/SP1314/raw/gpsnav> with mode 775
2013/11/22 00:00:57 - >>>> C_ss enabled <<<<<
2013/11/22 00:00:57 - Leaving buildLoggers
2013/11/22 00:00:57 - Start Cruise
2013/11/23 15:20:54 - enter StartLogging, resume =
2013/11/23 15:20:54 - 0
2013/11/23 15:20:57 - T11231520
2013/11/23 15:20:57 - Z
2013/11/23 15:20:58 - B009001
2013/11/23 15:20:59 - E0004020099
2013/11/23 15:21:00 - P00001
2013/11/23 15:21:01 - P00001
2013/11/23 15:21:01 - Q060
2013/11/23 15:21:02 - L2
2013/11/23 15:21:03 - I04
2013/11/23 15:21:03 - J040
2013/11/23 15:21:04 - FH00255
2013/11/23 15:21:05 - ?
2013/11/23 15:21:05 - F?
2013/11/23 15:21:06 - W064
2013/11/23 15:21:07 - Entering Loggers.start_logging
2013/11/23 15:21:07 - /usr/local/bin/ser_bin -y 2013 -P ttyUSB0 -b 19200 -d /home/data/SP1314/raw/nb300 -i /tmp/SerialLogger/inpipe.ttyUSB0 -o /tmp/SerialLogger/outpipe.ttyUSB0  -T 1385220067  -f sp -F -m 1 -H 2  -e raw -rlE -c -I 2> /tmp/stderr.ttyUSB0 &
2013/11/23 15:21:07 - /usr/local/bin/ser_asc -y 2013 -P ttyUSB1 -b 4800 -d /home/data/SP1314/raw/ashtech -i /tmp/SerialLogger/inpipe.ttyUSB1 -o /tmp/SerialLogger/outpipe.ttyUSB1  -T 1385220067    -f sp -F -m 1 -H 2  -e adu -tc '$GPGGA' '$PASHR,ATT' 2> /tmp/stderr.ttyUSB1 &
2013/11/23 15:21:07 - /usr/local/bin/ser_asc -y 2013 -P ttyUSB2 -b 4800 -d /home/data/SP1314/raw/gpshead -i /tmp/SerialLogger/inpipe.ttyUSB2 -o /tmp/SerialLogger/outpipe.ttyUSB2  -T 1385220067   -f sp -F -m 1 -H 2  -e hdg -tc  '$GPHDT' 2> /tmp/stderr.ttyUSB2 &
2013/11/23 15:21:07 - /usr/local/bin/ser_asc -y 2013 -P ttyUSB3 -b 4800 -d /home/data/SP1314/raw/gpsnav -i /tmp/SerialLogger/inpipe.ttyUSB3 -o /tmp/SerialLogger/outpipe.ttyUSB3  -T 1385220067   -f sp -F -m 1 -H 2  -e gps -tc  '$GPGGA' 2> /tmp/stderr.ttyUSB3 &
2013/11/23 15:21:07 - Leaving Loggers.start_logging
2013/11/23 15:21:07 - Updated SVs_present from SVs and wrote cmds
2013/11/23 15:21:07 - 0
2013/11/23 15:21:07 - Running /home/currents/programs/uhdas/scripts/DAS_while_logging.py
2013/11/23 15:21:07 - Exiting StartLogging
2013/11/24 06:11:02 - Entering StopLogging
2013/11/24 06:11:04 - Loggers.check_stop_logging: all log processes ended
2013/11/24 06:11:07 - Removed /home/adcp/flags/DAS.logging
2013/11/24 06:11:07 - Exiting StopLogging
2013/11/24 06:11:12 - Ready to destroy_loggers.
2013/11/24 06:11:12 - After destroy_loggers.
2013/11/24 06:11:12 - cp -au /home/adcp/log/* /home/data/SP1314/raw/log/
2013/11/24 06:11:12 - End Cruise
2013/11/26 21:51:42 - adcptree.py /home/data/SPtestdockside/proc/nb300 /home/currents/programs -d uhdas --configpath /home/data/SPtestdockside/raw/config --cruisename SPtestdockside
2013/11/26 21:51:42 - uh_progs =  /home/currents/programs
otherdemo is /home/currents/programs/adcp_templates/uhdas_template
making directory /home/data/SPtestdockside/proc/nb300/adcpdb
making directory /home/data/SPtestdockside/proc/nb300/cal
making directory /home/data/SPtestdockside/proc/nb300/cal/watertrk
making directory /home/data/SPtestdockside/proc/nb300/cal/botmtrk
making directory /home/data/SPtestdockside/proc/nb300/cal/heading
making directory /home/data/SPtestdockside/proc/nb300/cal/rotate
making directory /home/data/SPtestdockside/proc/nb300/contour
making directory /home/data/SPtestdockside/proc/nb300/edit
making directory /home/data/SPtestdockside/proc/nb300/grid
making directory /home/data/SPtestdockside/proc/nb300/load
making directory /home/data/SPtestdockside/proc/nb300/nav
making directory /home/data/SPtestdockside/proc/nb300/quality
making directory /home/data/SPtestdockside/proc/nb300/ping
making directory /home/data/SPtestdockside/proc/nb300/scan
making directory /home/data/SPtestdockside/proc/nb300/stick
making directory /home/data/SPtestdockside/proc/nb300/vector


** data type is uhdas
copying additional files for data type uhdas

file exists: not copying vmadcp.def to /home/data/SPtestdockside/proc/nb300/load
 
configpath                       /home/data/SPtestdockside/raw/config
cruisename                       SPtestdockside
datatype                         uhdas
demopath                         /home/currents/programs/adcp_templates/demo
docpath                          /home/currents/programs/adcp_doc
help                             0
instclass                        nb
pingtype                         nb
procdir                          /home/data/SPtestdockside/proc/nb300
uh_progs                         /home/currents/programs
varvals                          0
verbose                          0



config files for raw processing are in /home/data/SPtestdockside/proc/nb300/config
** UHDAS demo data are in /home/currents/programs/q_demos/uhdas/data


(1) writing template text file for processing notes:
     /home/data/SPtestdockside/proc/nb300/template_rpt.txt

(2) creating local web page for documentation

     open this file in your web browser:
     /home/data/SPtestdockside/proc/nb300/adcp_processing.html

done.
2013/11/26 21:51:43 - Entering buildLoggers
2013/11/26 21:51:43 - Created output directory </home/data/SPtestdockside/raw/nb300> with mode 775
2013/11/26 21:51:43 - Created output directory </home/data/SPtestdockside/raw/ashtech> with mode 775
2013/11/26 21:51:43 - Created output directory </home/data/SPtestdockside/raw/gpshead> with mode 775
2013/11/26 21:51:43 - Created output directory </home/data/SPtestdockside/raw/gpsnav> with mode 775
2013/11/26 21:51:43 - >>>> C_ss enabled <<<<<
2013/11/26 21:51:43 - Leaving buildLoggers
2013/11/26 21:51:43 - Start Cruise
2013/11/26 21:51:47 - enter StartLogging, resume =
2013/11/26 21:51:47 - 0
2013/11/26 21:51:50 - T11262151
2013/11/26 21:51:51 - Z
2013/11/26 21:51:51 - B009001
2013/11/26 21:51:52 - E0004020099
2013/11/26 21:51:53 - P00001
2013/11/26 21:51:54 - P00001
2013/11/26 21:51:54 - Q060
2013/11/26 21:51:55 - L2
2013/11/26 21:51:56 - I04
2013/11/26 21:51:56 - J040
2013/11/26 21:51:57 - FH00255
2013/11/26 21:51:58 - ?
2013/11/26 21:51:58 - F?
2013/11/26 21:51:59 - W064
2013/11/26 21:52:00 - Entering Loggers.start_logging
2013/11/26 21:52:00 - /usr/local/bin/ser_bin -y 2013 -P ttyUSB0 -b 19200 -d /home/data/SPtestdockside/raw/nb300 -i /tmp/SerialLogger/inpipe.ttyUSB0 -o /tmp/SerialLogger/outpipe.ttyUSB0  -T 1385502720  -f sp -F -m 1 -H 2  -e raw -rlE -c -I 2> /tmp/stderr.ttyUSB0 &
2013/11/26 21:52:00 - /usr/local/bin/ser_asc -y 2013 -P ttyUSB1 -b 4800 -d /home/data/SPtestdockside/raw/ashtech -i /tmp/SerialLogger/inpipe.ttyUSB1 -o /tmp/SerialLogger/outpipe.ttyUSB1  -T 1385502720    -f sp -F -m 1 -H 2  -e adu -tc '$GPGGA' '$PASHR,ATT' 2> /tmp/stderr.ttyUSB1 &
2013/11/26 21:52:00 - /usr/local/bin/ser_asc -y 2013 -P ttyUSB2 -b 4800 -d /home/data/SPtestdockside/raw/gpshead -i /tmp/SerialLogger/inpipe.ttyUSB2 -o /tmp/SerialLogger/outpipe.ttyUSB2  -T 1385502720   -f sp -F -m 1 -H 2  -e hdg -tc  '$GPHDT' 2> /tmp/stderr.ttyUSB2 &
2013/11/26 21:52:00 - /usr/local/bin/ser_asc -y 2013 -P ttyUSB3 -b 4800 -d /home/data/SPtestdockside/raw/gpsnav -i /tmp/SerialLogger/inpipe.ttyUSB3 -o /tmp/SerialLogger/outpipe.ttyUSB3  -T 1385502720   -f sp -F -m 1 -H 2  -e gps -tc  '$GPGGA' 2> /tmp/stderr.ttyUSB3 &
2013/11/26 21:52:00 - Leaving Loggers.start_logging
2013/11/26 21:52:00 - Updated SVs_present from SVs and wrote cmds
2013/11/26 21:52:00 - 0
2013/11/26 21:52:00 - Running /home/currents/programs/uhdas/scripts/DAS_while_logging.py
2013/11/26 21:52:00 - Exiting StartLogging
2013/11/26 22:03:46 - Entering StopLogging
2013/11/26 22:03:48 - Loggers.check_stop_logging: all log processes ended
2013/11/26 22:03:51 - Removed /home/adcp/flags/DAS.logging
2013/11/26 22:03:51 - Exiting StopLogging
2013/11/26 22:03:55 - Ready to destroy_loggers.
2013/11/26 22:03:55 - After destroy_loggers.
2013/11/26 22:03:55 - cp -au /home/adcp/log/* /home/data/SPtestdockside/raw/log/
2013/11/26 22:03:55 - End Cruise