*****************************************************************
Journal for accession number:  0137120
Created on:                    2015-10-21 12:30:19 UTC
By:                            James Reagan,OC5,SSMC3 4619,7134913

Source: Mr. Frederick Bahr (MBARI) submitted data and metadata to 
        NCEI in submission package F6X2HR via S2N.

Actions: An automated procedure copied the files from the submission package
	 into this accession. A metadata record in ISO 19115-2 XML format was also
	 generated from the information provided by the submitter and was copied into
	 this accession.

Files:

about/ 
This directory contains files created by NCEI staff, including 'negotiable'
information between NCEI staff and the data provider.

0137120_lonlat.txt - 
  Station locations for these data.  Each row contains the geographical 
  position where these data were collected (longitude in the left column
  and latitude in the right column, both in degrees). NCEI may have 
  corrected geographic positions that seemed to be in error when generating
  this file.  However, NCEI did not change the original data files under 
  the directory data/0-data.
  
0137120_map.jpg - 
  Station location map for these data based on the geographic positions
  in the 0137120_lonlat.txt file.
  
F6X2HR-confirmation_email.txt - 
  Email from the Send2NCEI web application to Mr. Frederick Bahr confirming 
  that NCEI has created an archival information package.

data/0-data/
This directory contains files in their original format as downloaded to NCEI.

The following comments were provided by the data provider in regards to the
formatting of the data files:
"file of ts data contain arrays of microcat data (time (matlab datenum), pressure, 
temperature (deg C), conductivity (S/m), and Salinity (psu). tpod data have depth 
in file name and contain time (matlab datenum), and temperature (deg C). ADCP data 
files contain the arrays depth, tn (time, matlab datenum), un (eastward component 
of velocity (cm/s)), vn (northward component of velocity (cm/s)), pg4n (percentage 
good 4-beam solution), pg3n (percentage good 3-Beam solution), gn (automatic gain 
correction for all 4 beams), cmn (correlation magnitude for all 4 beams), en (error 
velocity (cm/s), and flags for velocity (fu, and fv). The flag format is 0=good, 
1=bad, 3=missing 2=suspect."

data/1-data/
This directory contains files that were converted by NCEI from their
originally submitted format under the 0-data/ directory to an archival
format.

mcat*m#.csv - Comma-separated-value (CSV) files that NCEI converted from the
             MATLAB data files globec#_ts.mat in 0-data/.  These CSV files contain
	     date, time, pressure, temperature, conductivity, and salinity from 
	     the Seabird SBE-37IM MicroCAT sensor.  The '*' refers to the depth level of 
	     the mooring.  The '#' is which number globec file 
	     (e.g.,#=2 for globec2_ts.mat) was used.
	     
tpod*m#.csv - Comma-separated-value (CSV) files that NCEI converted from the
             MATLAB data file globec#_ts.mat in 0-data/.  These CSV files contain
	     date, time, and temperature, from the Seabird SBE-39 sensor.  The '*' refers 
	     to the depth level of the mooring. The '#' is which number globec file 
	     (e.g.,#=2 for globec2_ts.mat) was used.