* Sea-Bird SBE 9 Data File:
* FileName = C:\CTD\RR1011\IWISE10_136.hex
* Software Version Seasave V 7.18b
* Temperature SN = 2059
* Conductivity SN = 2112
* Number of Bytes Per Scan = 44
* Number of Voltage Words = 5
* Number of Scans Averaged by the Deck Unit = 1
* Append System Time to Every Scan
* System UpLoad Time = Aug 24 2010 13:19:42
* NMEA Latitude = 19 24.08 N
* NMEA Longitude = 121 04.36 E
* NMEA UTC (Time) = Aug 24 2010 13:19:43
* Store Lat/Lon Data = Append to Every Scan
** Ship: Revelle
** Multibeam Depth(m):
**
# nquan = 20
# nvalues = 10                          
# units = specified
# name 0 = latitude: Latitude [deg]
# name 1 = longitude: Longitude [deg]
# name 2 = t090C: Temperature [ITS-90, deg C]
# name 3 = c0S/m: Conductivity [S/m]
# name 4 = sal00: Salinity, Practical [PSU]
# name 5 = depSM: Depth [salt water, m]
# name 6 = prDM: Pressure, Digiquartz [db]
# name 7 = t190C: Temperature, 2 [ITS-90, deg C]
# name 8 = c1S/m: Conductivity, 2 [S/m]
# name 9 = sal11: Salinity, Practical, 2 [PSU]
# name 10 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
# name 11 = bat: Beam Attenuation, Chelsea/Seatech [1/m]
# name 12 = xmiss: Beam Transmission, Chelsea/Seatech [%]
# name 13 = altM: Altimeter [m]
# name 14 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/kg]
# name 15 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 16 = spar: SPAR/Surface Irradiance
# name 17 = pumps: Pump Status
# name 18 = nbin: number of scans per bin
# name 19 = flag: flag
# span 0 =   19.40127,   19.40137       
# span 1 =  121.07268,  121.07274       
# span 2 =    30.2500,    30.2585       
# span 3 =   5.644338,   5.645580       
# span 4 =    33.5321,    33.5354       
# span 5 =      9.966,     14.519       
# span 6 =     10.027,     14.608       
# span 7 =    30.2508,    30.2594       
# span 8 =   5.631318,   5.632573       
# span 9 =    33.4456,    33.4491       
# span 10 =     0.5163,     0.5467      
# span 11 =     0.0961,     0.1165      
# span 12 =    97.1288,    97.6262      
# span 13 =      83.56,      98.56      
# span 14 =    191.746,    193.452      
# span 15 =     4.3816,     4.4206      
# span 16 = 0.0000e+00, 0.0000e+00      
# span 17 =          1,          1      
# span 18 =         38,       1178      
# span 19 = 0.0000e+00, 0.0000e+00      
# interval = decibars: 1                
# start_time = Aug 24 2010 13:19:42 [System UTC, first data scan.]
# bad_flag = -9.990e-29
# <Sensors count="15" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>2059</SerialNumber>
#       <CalibrationDate>11-May-2010 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>4.12192858e-003</A>
#       <B>6.19702683e-004</B>
#       <C>2.00038487e-005</C>
#       <D>2.22861925e-006</D>
#       <F0_Old>1000.000</F0_Old>
#       <G>4.12180429e-003</G>
#       <H>6.19517461e-004</H>
#       <I>1.99739886e-005</I>
#       <J>2.22716409e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>2112</SerialNumber>
#       <CalibrationDate>29-Apr-10 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.01638313e+001</G>
#         <H>1.47234867e+000</H>
#         <I>-3.04324927e-003</I>
#         <J>2.92317197e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0401</SerialNumber>
#       <CalibrationDate>04-JUN-08</CalibrationDate>
#       <C1>-4.587651e+004</C1>
#       <C2>1.301851e-001</C2>
#       <C3>1.415793e-002</C3>
#       <D1>3.976239e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>2.998605e+001</T1>
#       <T2>-2.551978e-004</T2>
#       <T3>4.363724e-006</T3>
#       <T4>-5.746039e-009</T4>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.117000e-002</AD590M>
#       <AD590B>-8.668320e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>2165</SerialNumber>
#       <CalibrationDate>11-May-2010 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>4.32786357e-003</A>
#       <B>6.42496987e-004</B>
#       <C>2.31391063e-005</C>
#       <D>2.18980344e-006</D>
#       <F0_Old>1000.000</F0_Old>
#       <G>4.32767510e-003</G>
#       <H>6.42288687e-004</H>
#       <I>2.31067226e-005</I>
#       <J>2.18825230e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>2569</SerialNumber>
#       <CalibrationDate>29-Apr-10 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.00220293e+001</G>
#         <H>1.51870905e+000</H>
#         <I>-1.25328995e-004</I>
#         <J>9.05867419e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Fluorometer, WET Labs ECO-AFL/FL -->
#     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
#       <SerialNumber>FLRTD-1156</SerialNumber>
#       <CalibrationDate>08/25/2008</CalibrationDate>
#       <ScaleFactor>2.20000000e+001</ScaleFactor>
#       <!-- Dark output -->
#       <Vblank>0.0200</Vblank>
#     </FluoroWetlabECO_AFL_FL_Sensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Free -->
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Transmissometer, Chelsea/Seatech -->
#     <TransChelseaSeatechWetlabCStarSensor SensorID="59" >
#       <SerialNumber>CST-1176DR</SerialNumber>
#       <CalibrationDate>11-10-2008</CalibrationDate>
#       <M>21.7901</M>
#       <B>-1.2420</B>
#       <PathLength>0.250</PathLength>
#     </TransChelseaSeatechWetlabCStarSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>1184</SerialNumber>
#       <CalibrationDate>07/05/05</CalibrationDate>
#       <ScaleFactor>15.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Free -->
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>0186</SerialNumber>
#       <CalibrationDate>14-Apr-10p</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>3.9830e-001</Soc>
#         <offset>-0.5094</offset>
#         <A>-2.2893e-003</A>
#         <B> 1.8183e-004</B>
#         <C>-2.8053e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92630e-004</D1>
#         <D2>-4.64800e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.8000</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Free -->
#   </sensor>
#   <sensor Channel="14" >
#     <!-- SPAR voltage, Unavailable -->
#   </sensor>
#   <sensor Channel="15" >
#     <!-- SPAR voltage, SPAR/Surface Irradiance -->
#     <SPAR_Sensor SensorID="51" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ConversionFactor>0.00000000</ConversionFactor>
#       <RatioMultiplier>0.00000000</RatioMultiplier>
#     </SPAR_Sensor>
#   </sensor>
# </Sensors>
# datcnv_date = Feb 13 2018 01:58:34, 7.23.2 [datcnv_vars = 18]
# datcnv_in = Z:\data\r2r\cruise\RR1011\fileset\102109\data\iwise10_136.hex Z:\data\r2r\cruise\RR1011\fileset\102109\data\iwise10_136.CON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# datcnv_ox_tau_correction = yes
# celltm_date = Feb 13 2018 01:58:39, 7.23.2
# celltm_in = Z:\data\local\cruise\RR1011\products\r2rctd\iwise10_136.cnv
# celltm_alpha = 0.0300, 0.0300
# celltm_tau = 7.0000, 7.0000
# celltm_temp_sensor_use_for_cond = primary, secondary
# binavg_date = Feb 13 2018 01:58:41, 7.23.2
# binavg_in = Z:\data\local\cruise\RR1011\products\r2rctd\iwise10_136.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
   19.40136  121.07268    30.2512   5.644411    33.5336      9.966     10.027    30.2531   5.631512    33.4460     0.5412     0.0994    97.5458      94.51    191.746     4.3816 0.0000e+00          1         40 0.0000e+00
   19.40137  121.07269    30.2535   5.644783    33.5341     10.986     11.053    30.2540   5.631700    33.4463     0.5467     0.0968    97.6096      98.56    193.012     4.4106 0.0000e+00          1         78 0.0000e+00
   19.40136  121.07269    30.2500   5.644338    33.5333     11.875     11.947    30.2508   5.631318    33.4458     0.5308     0.0961    97.6262      85.47    192.627     4.4018 0.0000e+00          1        143 0.0000e+00
   19.40136  121.07269    30.2567   5.645344    33.5350     12.924     13.004    30.2580   5.632335    33.4472     0.5270     0.0966    97.6123      98.56    192.640     4.4021 0.0000e+00          1         38 0.0000e+00
   19.40136  121.07270    30.2577   5.645440    33.5348     13.976     14.062    30.2594   5.632536    33.4473     0.5163     0.0976    97.5890      98.56    192.767     4.4050 0.0000e+00          1        289 0.0000e+00
   19.40136  121.07270    30.2530   5.644723    33.5332     14.519     14.608    30.2542   5.631741    33.4456     0.5365     0.1165    97.1288      98.56    193.152     4.4138 0.0000e+00          1         48 0.0000e+00
   19.40134  121.07271    30.2548   5.645030    33.5340     14.080     14.166    30.2552   5.631926    33.4462     0.5309     0.1141    97.1869      92.32    192.964     4.4095 0.0000e+00          1        310 0.0000e+00
   19.40134  121.07271    30.2585   5.645580    33.5354     13.011     13.091    30.2592   5.632573    33.4479     0.5236     0.1140    97.1901      98.50    193.394     4.4193 0.0000e+00          1        132 0.0000e+00
   19.40132  121.07273    30.2582   5.645294    33.5340     11.951     12.024    30.2592   5.632493    33.4478     0.5246     0.1144    97.1796      97.24    193.190     4.4146 0.0000e+00          1       1178 0.0000e+00
   19.40127  121.07274    30.2547   5.644612    33.5321     11.346     11.415    30.2557   5.632303    33.4491     0.5169     0.1131    97.2110      83.56    193.452     4.4206 0.0000e+00          1        140 0.0000e+00