* Sea-Bird SBE 9 Data File:
* FileName = C:\CTD\RR1501\test3.hex
* Software Version Seasave V 7.23.2
* Temperature SN = 4138
* Conductivity SN = 2818
* Number of Bytes Per Scan = 38
* Number of Voltage Words = 4
* Number of Scans Averaged by the Deck Unit = 24
* Append System Time to Every Scan
* System UpLoad Time = Jan 11 2015 13:02:11
* NMEA Latitude = 42 48.40 S
* NMEA Longitude = 151 21.81 E
* NMEA UTC (Time) = Jan 11 2015 13:02:07
* Store Lat/Lon Data = Append to Every Scan
** Ship:
** Station:
** Operator:
* System UTC = Jan 11 2015 13:02:11
# nquan = 14
# nvalues = 13                          
# units = specified
# name 0 = latitude: Latitude [deg]
# name 1 = longitude: Longitude [deg]
# name 2 = t090C: Temperature [ITS-90, deg C]
# name 3 = c0S/m: Conductivity [S/m]
# name 4 = sal00: Salinity, Practical [PSU]
# name 5 = depSM: Depth [salt water, m]
# name 6 = prDM: Pressure, Digiquartz [db]
# name 7 = t190C: Temperature, 2 [ITS-90, deg C]
# name 8 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/kg]
# name 9 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 10 = altM: Altimeter [m]
# name 11 = pumps: Pump Status
# name 12 = nbin: number of scans per bin
# name 13 = flag: flag
# span 0 =  -42.80674,  -42.80671       
# span 1 =  151.36356,  151.36358       
# span 2 =    14.1245,    16.9209       
# span 3 =   0.432397,   4.524374       
# span 4 =     3.3190,    35.3676       
# span 5 =      0.535,     12.817       
# span 6 =      0.540,     12.919       
# span 7 =    14.1344,    16.9199       
# span 8 =    193.104,    240.952       
# span 9 =     4.4335,     5.5345       
# span 10 =       0.00,       0.00      
# span 11 =          0,          1      
# span 12 =          1,         60      
# span 13 = 0.0000e+00, 0.0000e+00      
# interval = decibars: 1                
# start_time = Jan 11 2015 13:02:11 [System UTC, first data scan.]
# bad_flag = -9.990e-29
# <Sensors count="12" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4138</SerialNumber>
#       <CalibrationDate>07-Oct-2014 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>4.32606796e-003</A>
#       <B>6.28970834e-004</B>
#       <C>2.10000472e-005</C>
#       <D>1.75973821e-006</D>
#       <F0_Old>1000.000</F0_Old>
#       <G>4.32587997e-003</G>
#       <H>6.28766782e-004</H>
#       <I>2.09691008e-005</I>
#       <J>1.75833345e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>2818</SerialNumber>
#       <CalibrationDate>10-Oct-14</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.01991982e+001</G>
#         <H>1.39657496e+000</H>
#         <I>8.63266930e-004</I>
#         <J>2.35390719e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0401</SerialNumber>
#       <CalibrationDate>01-OCT-2014</CalibrationDate>
#       <C1>-4.587324e+004</C1>
#       <C2>2.203974e-001</C2>
#       <C3>1.428573e-002</C3>
#       <D1>3.996177e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>2.998631e+001</T1>
#       <T2>-2.524827e-004</T2>
#       <T3>4.059283e-006</T3>
#       <T4>2.815200e-009</T4>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.117000e-002</AD590M>
#       <AD590B>-8.668320e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>2322</SerialNumber>
#       <CalibrationDate>14-Oct-2014 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>4.32454321e-003</A>
#       <B>6.42276950e-004</B>
#       <C>2.34773474e-005</C>
#       <D>2.29952654e-006</D>
#       <F0_Old>1000.000</F0_Old>
#       <G>4.32435585e-003</G>
#       <H>6.42069090e-004</H>
#       <I>2.34449820e-005</I>
#       <J>2.29796303e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- A/D voltage 0, Transmissometer, WET Labs C-Star -->
#     <WET_LabsCStar SensorID="71" >
#       <SerialNumber>CST-1189DR</SerialNumber>
#       <CalibrationDate>10/21/2014</CalibrationDate>
#       <M>19.5310</M>
#       <B>-1.0000</B>
#       <PathLength>25.000</PathLength>
#     </WET_LabsCStar>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 1, Fluorometer, Seapoint -->
#     <FluoroSeapointSensor SensorID="11" >
#       <SerialNumber>2958</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <!-- The following is an array index, not the actual gain setting. -->
#       <GainSetting>2</GainSetting>
#       <Offset>0.000</Offset>
#     </FluoroSeapointSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 2, Free -->
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 4, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>1136</SerialNumber>
#       <CalibrationDate>09-Oct-14</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>4.6594e-001</Soc>
#         <offset>-0.5293</offset>
#         <A>-3.9556e-003</A>
#         <B> 1.8925e-004</B>
#         <C>-2.7904e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.9800</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 5, Free -->
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 6, Free -->
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 7, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>43696</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>7.500</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
# </Sensors>
# datcnv_date = Jan 07 2018 19:01:34, 7.23.2 [datcnv_vars = 12]
# datcnv_in = Z:\data\r2r\cruise\RR1501\fileset\117300\data\test3.hex Z:\data\r2r\cruise\RR1501\fileset\117300\data\test3.XMLCON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# datcnv_ox_tau_correction = yes
# celltm_date = Jan 07 2018 19:01:35, 7.23.2
# celltm_in = Z:\data\local\cruise\RR1501\products\r2rctd\test3.cnv
# celltm_alpha = 0.0300, 0.0000
# celltm_tau = 7.0000, 0.0000
# celltm_temp_sensor_use_for_cond = primary, 
# binavg_date = Jan 07 2018 19:01:37, 7.23.2
# binavg_in = Z:\data\local\cruise\RR1501\products\r2rctd\test3.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
  -42.80671  151.36356    14.1245   0.432397     3.3190      0.535      0.540    14.1344    228.586     5.1257       0.00          0         17 0.0000e+00
  -42.80672  151.36356    16.8984   4.455812    34.7593      1.924      1.939    16.9072    193.104     4.4335       0.00          0          3 0.0000e+00
  -42.80672  151.36357    16.9107   4.518704    35.3243      2.840      2.862    16.9101    234.260     5.3807       0.00          1         21 0.0000e+00
  -42.80672  151.36356    16.9148   4.522988    35.3627      3.917      3.949    16.9129    239.023     5.4902       0.00          1          4 0.0000e+00
  -42.80672  151.36357    16.9159   4.523216    35.3636      4.867      4.905    16.9154    238.690     5.4825       0.00          1          5 0.0000e+00
  -42.80672  151.36356    16.9199   4.523722    35.3640      6.138      6.187    16.9184    238.667     5.4820       0.00          1          2 0.0000e+00
  -42.80672  151.36356    16.9180   4.523734    35.3658      6.835      6.890    16.9169    239.365     5.4981       0.00          1         60 0.0000e+00
  -42.80671  151.36357    16.9171   4.523868    35.3673      7.904      7.968    16.9164    240.614     5.5267       0.00          1          4 0.0000e+00
  -42.80672  151.36358    16.9188   4.524114    35.3676      8.949      9.020    16.9190    240.952     5.5345       0.00          1          3 0.0000e+00
  -42.80672  151.36356    16.9209   4.524374    35.3676      9.944     10.023    16.9199    240.733     5.5295       0.00          1          1 0.0000e+00
  -42.80674  151.36356    16.9193   4.524257    35.3675     11.137     11.226    16.9190    240.587     5.5261       0.00          1          5 0.0000e+00
  -42.80672  151.36356    16.9189   4.524257    35.3676     11.994     12.090    16.9181    240.653     5.5276       0.00          1          3 0.0000e+00
  -42.80674  151.36356    16.9171   4.524106    35.3675     12.817     12.919    16.9167    240.950     5.5345       0.00          1          7 0.0000e+00