2012-05-18 10:34:53,811 DEBUG root about to write control file parameters to --yearbase 2012 --cruisename MV1206 --configtype python --sonar os75bb --dbname a_mv --datatype uhdas --cfgpath /home/data/MV1206/proc/os75bb/config --ens_len 300 #--update_gbin ## python gbins: run by "run_lastensq.py" at sea --skip_avg ## see above --max_search_depth 1000 --proc_engine python --incremental --find_pflags --hidedisplay --top_plotbin 1 --auto 2012-05-18 10:34:53,811 DEBUG quick_adcp sys.argv = /home/currents/programs/uhdas/scripts/run_quick.py -d os75bb 2012-05-18 10:34:53,813 DEBUG quick_adcp progdir = /home/currents/programs 2012-05-18 10:34:53,813 DEBUG quick_adcp binos = lnx64 2012-05-18 10:34:53,814 DEBUG quick_setup found cruise_info.hcorr (ashtech, adu, 0) 2012-05-18 10:34:53,815 INFO quick_adcp importing numpy 2012-05-18 10:34:53,830 INFO quick_adcp importing matplotlib 2012-05-18 10:34:53,970 DEBUG quick_mpl in Q_mpl 2012-05-18 10:34:53,970 DEBUG quick_adcp ------processor dictionary:------ __doc__ __init__ __module__ aflagit_setup as_cont as_nav as_vect asetup catnav check_beamangle check_dbinfo check_headcorr check_opts check_uhdascfg ddtime def_qlist del_overlapping fill_thisload_timerange get_asvars get_cmd_timerange get_filelist get_nodb_times get_time_range getmat ldcodas listblocks llgrid loadping lst_btrk lst_conf lst_hdg lst_temp mpltest norotate opts plotbtcal_mpl plothcorr_mpl plotnav_mpl plotrefl_mpl plottemp_mpl plotwtcal_mpl putnav refabs refabsbt rotate rotated run_adcpsect run_applyedit run_autoedit_npy run_calc run_calib run_editsetup run_findpflags run_getheadcorr run_getnav run_guess_xducerxy run_guess_xducerxy_npy run_loaddb run_loadlta_npy run_loadping run_lstconfig run_lsthdg run_lsttemp run_matbincmd run_matfiles run_pingavg_npy run_plotter run_putnav run_py_codaseditsetup run_py_findpflags run_py_pingeditsetup run_pybincmd_lta run_pybincmd_uhdas run_pygbin_npy run_refabs run_refplots run_refsm run_refsm_npy run_rotate run_scanbin_npy run_scandata run_scanlta_npy run_scanping_npy run_setflags run_smoothr run_updategbin run_updatepygbin run_xducerxy run_xducerxy_npy scanping setflags smoothr timegrid timslip ubprint user_defined_headfunc write_codas_editdefaults write_ping_editdefaults write_timerange_file zapsetup 2012-05-18 10:34:53,970 INFO quick_adcp cwd is /home/data/MV1206/proc/os75bb about to run these steps: - editsetup - scandata - avg_and_load - setflags - getnav - get_headcorr - rotate - adcpsect - refabs - smoothnav - putnav - refplots - find_pflags - apply_edit - navsteps - lst_temp - calib - matfiles - find_pflags 2012-05-18 10:34:53,971 INFO quick_adcp original fix file is a_mv.gps 2012-05-18 10:34:53,971 INFO quick_adcp smoothed nav file is a_mv_refsm.asc 2012-05-18 10:34:53,971 DEBUG quick_asect extracting matlab files for os75, bb pings 2012-05-18 10:34:53,982 DEBUG quick_subs found 164 files using wildcard expansion from "/home/data/MV1206/raw/os75/*.raw" 2012-05-18 10:34:53,982 DEBUG quick_adcp starting with data files (as seen from scan/ or load/ directory): /home/data/MV1206/raw/os75/mv2012_124_72287.raw ... 2012-05-18 10:34:53,983 DEBUG quick_adcp Fri May 18 10:34:53 2012 running quick_adcp.py as follows: --cntfile /home/data/MV1206/proc/os75bb/os75bb_qpy.cnt ----- adcpsect variables ------ cbasename contour dbname a_mv dbpath ../adcpdb deeper_boundaries [50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, 450, 475, 500, 525, 550, 575, 600, 625, 650, 675, 700, 725, 750, 775] firstdepth 21 gridnum 80 increment 10 loaded_time_range all numbins 128 outdir . pgmin 50 prefix allbins_ proc_yearbase 2012 rl_endbin 20 rl_startbin 2 ss_string separate timegrid 60 vbasename vector ----- quick_adcp.py variables and current values ------ adjust_time 1 auto True badbeam None beamangle 30 best_loggerdday_name unix_dday best_utcdday_name dday bindir /home/currents/programs/codas3/bin/lnx64 binos lnx64 btrk_step 1 cfgpath /home/data/MV1206/proc/os75bb/config cntfile /home/data/MV1206/proc/os75bb/os75bb_qpy.cnt commands None configtype python cruisename MV1206 data_def vmadcp.def datadir /home/data/MV1206/raw/os75 datafile_glob *.raw datatype uhdas dbname a_mv dday_bailout None debug False diarystr %% no diary written %% displaystr set(0,'defaultfigureposition',[0 0 300 400]) set(0,'defaultfiguremenubar','none') set(0,'defaultfiguretoolbar','none') ducer_depth None editcfg_file override_editcfg enddday_file None ens_halign None ens_len 300 ensgyrorbin False expert None filelist ['/home/data/MV1206/raw/os75/mv2012_124_72287.raw', '/home/data/MV1206/raw/os75/mv2012_124_79200.raw', '/home/data/MV1206/raw/os75/mv2012_125_00000.raw', '/home/data/MV1206/raw/os75/mv2012_125_07200.raw', '/home/data/MV1206/raw/os75/mv2012_125_14400.raw', '/home/data/MV1206/raw/os75/mv2012_125_21600.raw', '/home/data/MV1206/raw/os75/mv2012_125_28800.raw', '/home/data/MV1206/raw/os75/mv2012_125_36000.raw', '/home/data/MV1206/raw/os75/mv2012_125_43200.raw', '/home/data/MV1206/raw/os75/mv2012_125_50400.raw', '/home/data/MV1206/raw/os75/mv2012_125_57600.raw', '/home/data/MV1206/raw/os75/mv2012_125_64800.raw', '/home/data/MV1206/raw/os75/mv2012_125_72000.raw', '/home/data/MV1206/raw/os75/mv2012_125_79200.raw', '/home/data/MV1206/raw/os75/mv2012_126_00000.raw', '/home/data/MV1206/raw/os75/mv2012_126_07200.raw', '/home/data/MV1206/raw/os75/mv2012_126_14400.raw', '/home/data/MV1206/raw/os75/mv2012_126_21600.raw', '/home/data/MV1206/raw/os75/mv2012_126_28800.raw', '/home/data/MV1206/raw/os75/mv2012_126_36000.raw', '/home/data/MV1206/raw/os75/mv2012_126_43200.raw', '/home/data/MV1206/raw/os75/mv2012_126_50400.raw', '/home/data/MV1206/raw/os75/mv2012_126_57600.raw', '/home/data/MV1206/raw/os75/mv2012_126_64800.raw', '/home/data/MV1206/raw/os75/mv2012_126_72000.raw', '/home/data/MV1206/raw/os75/mv2012_126_79200.raw', '/home/data/MV1206/raw/os75/mv2012_127_00000.raw', '/home/data/MV1206/raw/os75/mv2012_127_07200.raw', '/home/data/MV1206/raw/os75/mv2012_127_14400.raw', '/home/data/MV1206/raw/os75/mv2012_127_21600.raw', '/home/data/MV1206/raw/os75/mv2012_127_28800.raw', '/home/data/MV1206/raw/os75/mv2012_127_36000.raw', '/home/data/MV1206/raw/os75/mv2012_127_43200.raw', '/home/data/MV1206/raw/os75/mv2012_127_50400.raw', '/home/data/MV1206/raw/os75/mv2012_127_57600.raw', '/home/data/MV1206/raw/os75/mv2012_127_64800.raw', '/home/data/MV1206/raw/os75/mv2012_127_72000.raw', '/home/data/MV1206/raw/os75/mv2012_127_79200.raw', '/home/data/MV1206/raw/os75/mv2012_128_00000.raw', '/home/data/MV1206/raw/os75/mv2012_128_07200.raw', '/home/data/MV1206/raw/os75/mv2012_128_14400.raw', '/home/data/MV1206/raw/os75/mv2012_128_21600.raw', '/home/data/MV1206/raw/os75/mv2012_128_28800.raw', '/home/data/MV1206/raw/os75/mv2012_128_36000.raw', '/home/data/MV1206/raw/os75/mv2012_128_43200.raw', '/home/data/MV1206/raw/os75/mv2012_128_50400.raw', '/home/data/MV1206/raw/os75/mv2012_128_57600.raw', '/home/data/MV1206/raw/os75/mv2012_128_64800.raw', '/home/data/MV1206/raw/os75/mv2012_128_72000.raw', '/home/data/MV1206/raw/os75/mv2012_128_79200.raw', '/home/data/MV1206/raw/os75/mv2012_129_00000.raw', '/home/data/MV1206/raw/os75/mv2012_129_07200.raw', '/home/data/MV1206/raw/os75/mv2012_129_14400.raw', '/home/data/MV1206/raw/os75/mv2012_129_21600.raw', '/home/data/MV1206/raw/os75/mv2012_129_28800.raw', '/home/data/MV1206/raw/os75/mv2012_129_36000.raw', '/home/data/MV1206/raw/os75/mv2012_129_43200.raw', '/home/data/MV1206/raw/os75/mv2012_129_50400.raw', '/home/data/MV1206/raw/os75/mv2012_129_57600.raw', '/home/data/MV1206/raw/os75/mv2012_129_64800.raw', '/home/data/MV1206/raw/os75/mv2012_129_72000.raw', '/home/data/MV1206/raw/os75/mv2012_129_79200.raw', '/home/data/MV1206/raw/os75/mv2012_130_00000.raw', '/home/data/MV1206/raw/os75/mv2012_130_07200.raw', '/home/data/MV1206/raw/os75/mv2012_130_14400.raw', '/home/data/MV1206/raw/os75/mv2012_130_21600.raw', '/home/data/MV1206/raw/os75/mv2012_130_28800.raw', '/home/data/MV1206/raw/os75/mv2012_130_36000.raw', '/home/data/MV1206/raw/os75/mv2012_130_43200.raw', '/home/data/MV1206/raw/os75/mv2012_130_50400.raw', '/home/data/MV1206/raw/os75/mv2012_130_57600.raw', '/home/data/MV1206/raw/os75/mv2012_130_64800.raw', '/home/data/MV1206/raw/os75/mv2012_130_72000.raw', '/home/data/MV1206/raw/os75/mv2012_130_79200.raw', '/home/data/MV1206/raw/os75/mv2012_131_00000.raw', '/home/data/MV1206/raw/os75/mv2012_131_07200.raw', '/home/data/MV1206/raw/os75/mv2012_131_14400.raw', '/home/data/MV1206/raw/os75/mv2012_131_21600.raw', '/home/data/MV1206/raw/os75/mv2012_131_28800.raw', '/home/data/MV1206/raw/os75/mv2012_131_36000.raw', '/home/data/MV1206/raw/os75/mv2012_131_43200.raw', '/home/data/MV1206/raw/os75/mv2012_131_50400.raw', '/home/data/MV1206/raw/os75/mv2012_131_57600.raw', '/home/data/MV1206/raw/os75/mv2012_131_64800.raw', '/home/data/MV1206/raw/os75/mv2012_131_72000.raw', '/home/data/MV1206/raw/os75/mv2012_131_79200.raw', '/home/data/MV1206/raw/os75/mv2012_132_00000.raw', '/home/data/MV1206/raw/os75/mv2012_132_07200.raw', '/home/data/MV1206/raw/os75/mv2012_132_14400.raw', '/home/data/MV1206/raw/os75/mv2012_132_21600.raw', '/home/data/MV1206/raw/os75/mv2012_132_28800.raw', '/home/data/MV1206/raw/os75/mv2012_132_36000.raw', '/home/data/MV1206/raw/os75/mv2012_132_43200.raw', '/home/data/MV1206/raw/os75/mv2012_132_50400.raw', '/home/data/MV1206/raw/os75/mv2012_132_57600.raw', '/home/data/MV1206/raw/os75/mv2012_132_64800.raw', '/home/data/MV1206/raw/os75/mv2012_132_72000.raw', '/home/data/MV1206/raw/os75/mv2012_132_79200.raw', '/home/data/MV1206/raw/os75/mv2012_133_00000.raw', '/home/data/MV1206/raw/os75/mv2012_133_07200.raw', '/home/data/MV1206/raw/os75/mv2012_133_14400.raw', '/home/data/MV1206/raw/os75/mv2012_133_21600.raw', '/home/data/MV1206/raw/os75/mv2012_133_28800.raw', '/home/data/MV1206/raw/os75/mv2012_133_36000.raw', '/home/data/MV1206/raw/os75/mv2012_133_43200.raw', '/home/data/MV1206/raw/os75/mv2012_133_50400.raw', '/home/data/MV1206/raw/os75/mv2012_133_57600.raw', '/home/data/MV1206/raw/os75/mv2012_133_64800.raw', '/home/data/MV1206/raw/os75/mv2012_133_72000.raw', '/home/data/MV1206/raw/os75/mv2012_133_79200.raw', '/home/data/MV1206/raw/os75/mv2012_134_00000.raw', '/home/data/MV1206/raw/os75/mv2012_134_07200.raw', '/home/data/MV1206/raw/os75/mv2012_134_14400.raw', '/home/data/MV1206/raw/os75/mv2012_134_21600.raw', '/home/data/MV1206/raw/os75/mv2012_134_28800.raw', '/home/data/MV1206/raw/os75/mv2012_134_36000.raw', '/home/data/MV1206/raw/os75/mv2012_134_43200.raw', '/home/data/MV1206/raw/os75/mv2012_134_50400.raw', '/home/data/MV1206/raw/os75/mv2012_134_57600.raw', '/home/data/MV1206/raw/os75/mv2012_134_64800.raw', '/home/data/MV1206/raw/os75/mv2012_134_72000.raw', '/home/data/MV1206/raw/os75/mv2012_134_79200.raw', '/home/data/MV1206/raw/os75/mv2012_135_00000.raw', '/home/data/MV1206/raw/os75/mv2012_135_07200.raw', '/home/data/MV1206/raw/os75/mv2012_135_14400.raw', '/home/data/MV1206/raw/os75/mv2012_135_21600.raw', '/home/data/MV1206/raw/os75/mv2012_135_28800.raw', '/home/data/MV1206/raw/os75/mv2012_135_36000.raw', '/home/data/MV1206/raw/os75/mv2012_135_43200.raw', '/home/data/MV1206/raw/os75/mv2012_135_50400.raw', '/home/data/MV1206/raw/os75/mv2012_135_57600.raw', '/home/data/MV1206/raw/os75/mv2012_135_64800.raw', '/home/data/MV1206/raw/os75/mv2012_135_72000.raw', '/home/data/MV1206/raw/os75/mv2012_135_79200.raw', '/home/data/MV1206/raw/os75/mv2012_136_00000.raw', '/home/data/MV1206/raw/os75/mv2012_136_07200.raw', '/home/data/MV1206/raw/os75/mv2012_136_14400.raw', '/home/data/MV1206/raw/os75/mv2012_136_21600.raw', '/home/data/MV1206/raw/os75/mv2012_136_28800.raw', '/home/data/MV1206/raw/os75/mv2012_136_36000.raw', '/home/data/MV1206/raw/os75/mv2012_136_43200.raw', '/home/data/MV1206/raw/os75/mv2012_136_50400.raw', '/home/data/MV1206/raw/os75/mv2012_136_57600.raw', '/home/data/MV1206/raw/os75/mv2012_136_64800.raw', '/home/data/MV1206/raw/os75/mv2012_136_72000.raw', '/home/data/MV1206/raw/os75/mv2012_136_79200.raw', '/home/data/MV1206/raw/os75/mv2012_137_00000.raw', '/home/data/MV1206/raw/os75/mv2012_137_07200.raw', '/home/data/MV1206/raw/os75/mv2012_137_14400.raw', '/home/data/MV1206/raw/os75/mv2012_137_21600.raw', '/home/data/MV1206/raw/os75/mv2012_137_28800.raw', '/home/data/MV1206/raw/os75/mv2012_137_36000.raw', '/home/data/MV1206/raw/os75/mv2012_137_43200.raw', '/home/data/MV1206/raw/os75/mv2012_137_50400.raw', '/home/data/MV1206/raw/os75/mv2012_137_57600.raw', '/home/data/MV1206/raw/os75/mv2012_137_64800.raw', '/home/data/MV1206/raw/os75/mv2012_137_72000.raw', '/home/data/MV1206/raw/os75/mv2012_137_79200.raw', '/home/data/MV1206/raw/os75/mv2012_138_00000.raw', '/home/data/MV1206/raw/os75/mv2012_138_07200.raw', '/home/data/MV1206/raw/os75/mv2012_138_14400.raw', '/home/data/MV1206/raw/os75/mv2012_138_21600.raw', '/home/data/MV1206/raw/os75/mv2012_138_28800.raw', '/home/data/MV1206/raw/os75/mv2012_138_36000.raw'] filter_hwidth 0.0208 find_pflags True firstdepth 21 fixfile a_mv.gps frequency 75 gbin_style python gbindirbase /home/data/MV1206/gbin hcorr_inst ashtech help False hidedisplay True incremental True instname os75 jitter 15 max_BLKprofiles 399 max_search_depth 1000 maxrunsecs None min_filter_fraction 0.5 model os nosave_editcfg 0 num_persistence 24 numbins 128 orig_fixfile a_mv.gps overview False pgmin 50 ping_headcorr False pingtype bb post_headcorr None printformats png proc_engine python proc_yearbase 2012 progdir /home/currents/programs py_gbindirbase /home/data/MV1206/gbin rawstd_cutoff None rl_endbin 20 rl_startbin 2 rotate_amplitude 1 rotate_angle 0 rotate_file None save_editcfg 1 save_lastens 0 setup_info False skip_avg True smfile a_mv_refsm.asc sonar os75bb steps2rerun timeout_secs 86400 tips False tktail False top_plotbin 1 ub_type 1920 update_gbin False use_refsm True use_smoothr False vardoc False varvals False wtrk_step 7 xducer_dx None xducer_dy None yearbase 2012 configured to run the following steps: editsetup scandata avg_and_load setflags getnav get_headcorr rotate adcpsect refabs smoothnav putnav refplots find_pflags apply_edit navsteps lst_temp calib matfiles find_pflags 2012-05-18 10:34:53,983 INFO quick_adcp --------------------------------------------- 2012-05-18 10:34:53,983 INFO quick_adcp step 1: set up editing files 2012-05-18 10:34:53,983 DEBUG quick_run executing commands from /home/data/MV1206/proc/os75bb/edit 2012-05-18 10:34:53,983 DEBUG quick_run setup.m exists. not replacing 2012-05-18 10:34:53,983 DEBUG quick_run asetup.m exists. not replacing 2012-05-18 10:34:53,984 DEBUG quick_run aflagit_setup.m exists. not replacing 2012-05-18 10:34:53,984 INFO quick_adcp --------------------------------------------- 2012-05-18 10:34:53,984 INFO quick_adcp step 2: scan files for time range 2012-05-18 10:34:53,984 INFO quick_adcp about to run numpy scan, requiring python gbins 2012-05-18 10:34:53,984 DEBUG quick_npy Starting: scanping 2012-05-18 10:34:54,173 DEBUG quick_npy Ending: scanping 2012-05-18 10:34:54,174 DEBUG quick_subs start_end_time 2012/05/04 20:04:51 to 2012/05/04 20:30:03 2012-05-18 10:34:54,174 DEBUG quick_subs dd0: 124.836701 dd1: 124.854201 2012-05-18 10:34:54,174 INFO quick_adcp in quick_adcp.py: after scan; look for database times in /home/data/MV1206/proc/os75bb 2012-05-18 10:34:54,174 INFO quick_adcp looking for database with adcpdb/a_mv*.blk 2012-05-18 10:34:54,175 INFO quick_adcp database found: listing blocks 2012-05-18 10:34:54,175 DEBUG quick_subs removing a_mvdir.blk 2012-05-18 10:34:54,175 DEBUG quick_subs about to run mkblkdir 2012-05-18 10:34:54,175 DEBUG quick_subs database still exists; rerunning mkdirblk 2012-05-18 10:34:54,175 DEBUG quick_subs running /home/currents/programs/codas3/bin/lnx64/mkblkdir mkblkdir.tmp 2012-05-18 10:34:54,185 DEBUG quick_subs database passes. 2012-05-18 10:34:54,185 DEBUG quick_subs start_end_time 2012/05/04 20:09:50 to 2012/05/18 09:59:49 2012-05-18 10:34:54,185 DEBUG quick_subs dd0: 124.840162 dd1: 138.416539 2012-05-18 10:34:54,186 DEBUG quick_adcp in quick_adcp.py before load, just looked for database times 2012-05-18 10:34:54,186 DEBUG quick_adcp origdb_time_range is 2012/05/04 20:09:50 to 2012/05/18 09:59:49 2012-05-18 10:34:54,186 DEBUG quick_adcp (124.840162 to 138.416539) 2012-05-18 10:34:54,186 INFO quick_adcp --------------------------------------------- 2012-05-18 10:34:54,186 INFO quick_adcp step 3: generate averaged data... 2012-05-18 10:34:54,186 DEBUG quick_run file load/ping_editparams.txt exists. not replacing 2012-05-18 10:34:54,186 DEBUG quick_setup starting in /home/data/MV1206/proc/os75bb 2012-05-18 10:34:54,186 DEBUG quick_setup executing commands from /home/data/MV1206/proc/os75bb/load 2012-05-18 10:34:54,186 DEBUG quick_setup running python command "run_pingavg_npy" 2012-05-18 10:34:54,186 DEBUG quick_npy Starting: pingavg 2012-05-18 10:34:54,188 DEBUG quick_npy singleping editing parameters: 2012-05-18 10:34:54,188 DEBUG quick_npy bigtarget_mab_window : 11 2012-05-18 10:34:54,188 DEBUG quick_npy rl_endbin : 20 2012-05-18 10:34:54,188 DEBUG quick_npy max_search_depth : 1000 2012-05-18 10:34:54,188 DEBUG quick_npy cor_cutoff : 120 2012-05-18 10:34:54,188 DEBUG quick_npy ampfilt : 40 2012-05-18 10:34:54,189 DEBUG quick_npy bigtarget_lgb_margin : 0.500000 2012-05-18 10:34:54,189 DEBUG quick_npy rl_startbin : 2 2012-05-18 10:34:54,189 DEBUG quick_npy ecutoff : 1 2012-05-18 10:34:54,189 DEBUG quick_npy refavg_valcutoff : 1 2012-05-18 10:34:54,189 DEBUG quick_npy weakprof_percent : 30 2012-05-18 10:34:54,189 DEBUG quick_npy bigtarget_ampthresh : 55 2012-05-18 10:34:54,195 INFO pingavg Pingavg.run for time range 138.416677 to 138.437553 2012-05-18 10:34:54,219 DEBUG pingavg Chunk 1 of 1, 138.416677 to 138.437553 2012-05-18 10:34:54,219 DEBUG pingavg Nothing written 2012-05-18 10:34:54,219 DEBUG quick_npy wrote 0 averages 2012-05-18 10:34:54,220 DEBUG quick_npy Ending: pingavg 2012-05-18 10:34:54,220 INFO quick_adcp --------------------------------------------- 2012-05-18 10:34:54,220 INFO quick_adcp step 4: load averaged data (to database) 2012-05-18 10:34:54,221 DEBUG quick_subs in del_overlapping 2012-05-18 10:34:54,221 DEBUG quick_subs lastblock: 2012-05-18 10:34:54,221 DEBUG quick_subs 14 2012-05-18 10:34:54,221 DEBUG quick_subs lastcmd: 2012-05-18 10:34:54,221 DEBUG quick_subs 14 2012-05-18 10:34:54,221 DEBUG quick_subs delblks: 2012-05-18 10:34:54,221 DEBUG quick_subs [14] 2012-05-18 10:34:54,221 DEBUG quick_subs loadblks: 2012-05-18 10:34:54,221 DEBUG quick_subs [14] 2012-05-18 10:34:54,221 DEBUG quick_subs about to run mkblkdir 2012-05-18 10:34:54,222 DEBUG quick_subs database still exists; rerunning mkdirblk 2012-05-18 10:34:54,222 DEBUG quick_subs running /home/currents/programs/codas3/bin/lnx64/mkblkdir mkblkdir.tmp 2012-05-18 10:34:54,231 DEBUG quick_subs database passes. 2012-05-18 10:34:54,231 DEBUG quick_subs start_end_time 2012/05/04 20:09:50 to 2012/05/18 09:04:48 2012-05-18 10:34:54,232 DEBUG quick_subs dd0: 124.840162 dd1: 138.378333 2012-05-18 10:34:54,232 DEBUG quick_run [14] 2012-05-18 10:34:54,232 DEBUG quick_run cmdlist 2012-05-18 10:34:54,232 DEBUG quick_run ['./ens_blk014.cmd'] 2012-05-18 10:34:54,233 INFO quick_run Warning: 1 files will be loaded; 14 already exist 2012-05-18 10:34:54,233 INFO quick_run Fri May 18 10:34:54 2012 2012-05-18 10:34:54,233 INFO quick_run about to load uhdas files 2012-05-18 10:34:54,233 INFO quick_run /home/data/MV1206/raw/os75/mv2012_124_72287.raw /home/data/MV1206/raw/os75/mv2012_124_79200.raw /home/data/MV1206/raw/os75/mv2012_125_00000.raw /home/data/MV1206/raw/os75/mv2012_125_07200.raw /home/data/MV1206/raw/os75/mv2012_125_14400.raw ... 2012-05-18 10:34:54,233 DEBUG quick_setup load/ldcodas.tmp exists 2012-05-18 10:34:54,233 DEBUG quick_setup starting in /home/data/MV1206/proc/os75bb 2012-05-18 10:34:54,233 DEBUG quick_setup executing commands from /home/data/MV1206/proc/os75bb/load 2012-05-18 10:34:54,233 DEBUG quick_setup running python command "ldcodas" 2012-05-18 10:34:54,233 DEBUG quick_subs filling "thisload" timerange 2012-05-18 10:34:54,233 DEBUG quick_subs in ldcodas 2012-05-18 10:34:54,234 DEBUG quick_subs cmdlist: 2012-05-18 10:34:54,234 DEBUG quick_subs ['./ens_blk014.cmd'] 2012-05-18 10:34:54,234 DEBUG quick_subs DATABASE_NAME: ../adcpdb/a_mv DEFINITION_FILE: vmadcp.def LOG_FILE: load.log YEAR_BASE: 2012 cmd_file_list /* use only if specifying cmd paths, not "@" */ END ./ens_blk014.cmd 2012-05-18 10:34:54,234 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/ldcodas ldcodas.tmp 2012-05-18 10:34:54,241 DEBUG quick_subs removing a_mvdir.blk 2012-05-18 10:34:54,242 DEBUG quick_subs about to run mkblkdir 2012-05-18 10:34:54,242 DEBUG quick_subs database still exists; rerunning mkdirblk 2012-05-18 10:34:54,242 DEBUG quick_subs running /home/currents/programs/codas3/bin/lnx64/mkblkdir mkblkdir.tmp 2012-05-18 10:34:54,251 DEBUG quick_subs database passes. 2012-05-18 10:34:54,252 DEBUG quick_subs start_end_time 2012/05/04 20:09:50 to 2012/05/18 10:29:48 2012-05-18 10:34:54,252 DEBUG quick_subs dd0: 124.840162 dd1: 138.437361 2012-05-18 10:34:54,252 INFO quick_adcp loaded_time_range is 2012/05/04 20:09:50 to 2012/05/18 10:29:48 2012-05-18 10:34:54,252 INFO quick_adcp (124.840162 to 138.437361) 2012-05-18 10:34:54,252 INFO quick_adcp origdb_time_range is 2012/05/04 20:09:50 to 2012/05/18 09:59:49 2012-05-18 10:34:54,252 INFO quick_adcp (124.840162 to 138.416539) 2012-05-18 10:34:54,252 INFO quick_adcp thisload_time_range is 2012/05/18 09:09:47 to 2012/05/18 10:29:48 2012-05-18 10:34:54,253 INFO quick_adcp (138.381794 to 138.381794) 2012-05-18 10:34:54,253 INFO quick_adcp --------------------- 2012-05-18 10:34:54,253 DEBUG quick_setup starting in /home/data/MV1206/proc/os75bb 2012-05-18 10:34:54,253 DEBUG quick_setup executing commands from /home/data/MV1206/proc/os75bb/adcpdb 2012-05-18 10:34:54,253 DEBUG quick_setup running python command "lst_conf" 2012-05-18 10:34:54,253 DEBUG quick_subs dbname: a_mv output: a_mv.cnh time_ranges: all 2012-05-18 10:34:54,253 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/lst_conf lst_conf.tmp 2012-05-18 10:34:54,468 DEBUG quick_setup found (in edit/asetup.m): 2012-05-18 10:34:54,469 DEBUG quick_setup config.beamangle is 30 2012-05-18 10:34:54,469 INFO quick_adcp --------------------------------------------- 2012-05-18 10:34:54,469 INFO quick_adcp step 5: set up files for gautoedit.py 2012-05-18 10:34:54,469 DEBUG quick_run file edit/codas_editparams.txt exists. not replacing 2012-05-18 10:34:54,469 INFO quick_adcp --------------------------------------------- 2012-05-18 10:34:54,469 INFO quick_adcp step 6: set up files for gautoedit.py 2012-05-18 10:34:54,469 DEBUG quick_setup starting in /home/data/MV1206/proc/os75bb 2012-05-18 10:34:54,469 DEBUG quick_setup executing commands from /home/data/MV1206/proc/os75bb/edit 2012-05-18 10:34:54,469 DEBUG quick_setup running python command "setflags" 2012-05-18 10:34:54,469 DEBUG quick_subs dbname: ../adcpdb/a_mv pg_min: 50 set_range_bit time_ranges: all 2012-05-18 10:34:54,469 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/setflags setflags.tmp 2012-05-18 10:34:54,502 INFO quick_adcp --------------------------------------------- 2012-05-18 10:34:54,503 INFO quick_adcp step 7: get navigation 2012-05-18 10:34:54,503 DEBUG quick_setup starting in /home/data/MV1206/proc/os75bb 2012-05-18 10:34:54,503 DEBUG quick_setup executing commands from /home/data/MV1206/proc/os75bb/nav 2012-05-18 10:34:54,503 DEBUG quick_setup running python command "catnav" 2012-05-18 10:34:54,505 DEBUG quick_setup cal/rotate/lst_hdg.tmp exists 2012-05-18 10:34:54,505 DEBUG quick_setup starting in /home/data/MV1206/proc/os75bb 2012-05-18 10:34:54,505 DEBUG quick_setup executing commands from /home/data/MV1206/proc/os75bb/cal/rotate 2012-05-18 10:34:54,505 DEBUG quick_setup running python command "lst_hdg" 2012-05-18 10:34:54,505 DEBUG quick_subs dbname: ../../adcpdb/a_mv output: scn.hdg step_size= 1 year_base= 2012 time_ranges: all 2012-05-18 10:34:54,505 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/lst_hdg lst_hdg.tmp 2012-05-18 10:34:54,528 INFO quick_adcp --------------------------------------------- 2012-05-18 10:34:54,528 INFO quick_adcp step 8: get heading correction 2012-05-18 10:34:54,528 DEBUG quick_run hcorr_inst is ashtech 2012-05-18 10:34:54,529 DEBUG quick_mpl Starting plot: hcorr 2012-05-18 10:34:54,565 DEBUG quick_mplplots found 13.597204 days of data 2012-05-18 10:34:54,565 DEBUG quick_mplplots figures with 4 panels per page, 1.000000 days per panel 2012-05-18 10:34:54,565 DEBUG quick_mplplots printing 4 pages 2012-05-18 10:34:55,122 DEBUG quick_mpl Ending plot: hcorr 2012-05-18 10:34:55,124 INFO quick_adcp --------------------------------------------- 2012-05-18 10:34:55,126 INFO quick_adcp step 9: rotate velocities 2012-05-18 10:34:55,126 DEBUG quick_setup cal/rotate/norotate.tmp exists 2012-05-18 10:34:55,127 DEBUG quick_setup starting in /home/data/MV1206/proc/os75bb 2012-05-18 10:34:55,127 DEBUG quick_setup executing commands from /home/data/MV1206/proc/os75bb/cal/rotate 2012-05-18 10:34:55,127 DEBUG quick_setup running python command "norotate" 2012-05-18 10:34:55,127 DEBUG quick_subs /* No rotation was done using the "rotate" command, but */ /* it is useful have the skeleton of a rotate.tmp file */ /* to edit, should the need arise. That is the purpose */ /* of this file. DB_NAME: ../../adcpdb/a_mv LOG_FILE: rotate.log TIME_RANGE: 2012/05/04 20:09:50 to 2012/05/18 10:29:48 OPTION_LIST: water_and_bottom_track: year_base= 2012 /* time_angle_file: time_angle.ang */ amplitude= 1.0 angle_0= 0.0 end end 2012-05-18 10:34:55,127 DEBUG quick_setup about to run echo "writing dummy rotate file" 2012-05-18 10:34:55,132 INFO quick_adcp --------------------------------------------- 2012-05-18 10:34:55,132 INFO quick_adcp step 10: nav steps: run adcpsect 2012-05-18 10:34:55,132 DEBUG quick_setup nav/as_nav.tmp exists 2012-05-18 10:34:55,132 DEBUG quick_setup starting in /home/data/MV1206/proc/os75bb 2012-05-18 10:34:55,133 DEBUG quick_setup executing commands from /home/data/MV1206/proc/os75bb/nav 2012-05-18 10:34:55,133 DEBUG quick_setup running python command "as_nav" 2012-05-18 10:34:55,133 DEBUG quick_subs dbname: ../adcpdb/a_mv output: a_mv step_size: 1 ndepth: 20 time_ranges: separate year_base= 2012 option_list: pg_min= 50 navigation: reference_bins 2 to 20 end statistics: mean units= 0.01 /* cm/s instead of default m/s */ end flag_mask: ALL_BITS end end 2012/05/04 20:09:50 to 2012/05/18 10:29:48 /* the whole time range */ 2012-05-18 10:34:55,133 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/adcpsect as_nav.tmp 2012-05-18 10:34:55,180 INFO quick_adcp --------------------------------------------- 2012-05-18 10:34:55,180 INFO quick_adcp step 11: nav steps: run refabs 2012-05-18 10:34:55,181 DEBUG quick_setup starting in /home/data/MV1206/proc/os75bb 2012-05-18 10:34:55,181 DEBUG quick_setup executing commands from /home/data/MV1206/proc/os75bb/nav 2012-05-18 10:34:55,181 DEBUG quick_setup running python command "refabs" 2012-05-18 10:34:55,181 DEBUG quick_subs fix_file_type: simple reference_file: a_mv.nav fix_file: a_mv.gps output: a_mv.ref year_base= 2012 ensemble_length= 300 gap_tolerance= 10 2012-05-18 10:34:55,181 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/refabs refabs.tmp 2012-05-18 10:34:55,212 INFO quick_adcp --------------------------------------------- 2012-05-18 10:34:55,212 INFO quick_adcp step 12: nav steps: run smoothr for plots 2012-05-18 10:34:55,212 DEBUG quick_setup nav/smoothr.tmp exists 2012-05-18 10:34:55,212 DEBUG quick_setup starting in /home/data/MV1206/proc/os75bb 2012-05-18 10:34:55,212 DEBUG quick_setup executing commands from /home/data/MV1206/proc/os75bb/nav 2012-05-18 10:34:55,212 DEBUG quick_setup running python command "smoothr" 2012-05-18 10:34:55,212 DEBUG quick_subs reference_file: a_mv.nav refabs_output: a_mv.ref output: a_mv.sm filter_hwidth= 0.0208 min_filter_fraction= 0.5 max_gap_ratio= 0.05 max_gap_distance= 50 max_gap_time= 30 /* 0.5 minutes */ ensemble_time= 300 max_speed= 5.0 min_speed= 1.0 iterations= 5 fix_to_dr_limit= 0.00050 2012-05-18 10:34:55,213 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/smoothr smoothr.tmp 2012-05-18 10:34:55,362 INFO quick_adcp --------------------------------------------- 2012-05-18 10:34:55,362 INFO quick_adcp step 13: nav steps: smooth navigation 2012-05-18 10:34:55,362 INFO quick_adcp about to run numpy refsm 2012-05-18 10:34:55,362 DEBUG quick_npy Starting: refsm 2012-05-18 10:34:55,484 INFO nav dtmin = -0.50 dtmax = 0.50 2012-05-18 10:34:55,608 DEBUG quick_npy Ending: refsm 2012-05-18 10:34:55,608 INFO quick_adcp --------------------------------------------- 2012-05-18 10:34:55,608 INFO quick_adcp step 14: nav steps: put smoothed nav into codasdb 2012-05-18 10:34:55,608 DEBUG quick_setup nav/putnav.tmp exists 2012-05-18 10:34:55,608 DEBUG quick_setup starting in /home/data/MV1206/proc/os75bb 2012-05-18 10:34:55,608 DEBUG quick_setup executing commands from /home/data/MV1206/proc/os75bb/nav 2012-05-18 10:34:55,608 DEBUG quick_setup running python command "putnav" 2012-05-18 10:34:55,609 DEBUG quick_subs dbname: ../adcpdb/a_mv position_file: a_mv_refsm.asc year_base= 2012 tolerance= 5 navigation_sources: gps end 2012-05-18 10:34:55,609 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/putnav putnav.tmp 2012-05-18 10:34:55,663 INFO quick_adcp plotting navigation 2012-05-18 10:34:55,663 DEBUG quick_mpl Starting plot: nav 2012-05-18 10:34:55,952 DEBUG quick_mpl Ending plot: nav 2012-05-18 10:34:55,952 INFO quick_adcp --------------------------------------------- 2012-05-18 10:34:55,952 INFO quick_adcp step 15: nav steps: make reflayer plots 2012-05-18 10:34:55,952 DEBUG quick_mpl Starting plot: refl 2012-05-18 10:34:56,039 DEBUG quick_mplplots found 13.590279 days of data 2012-05-18 10:34:56,040 DEBUG quick_mplplots start day is 124.000000 2012-05-18 10:34:56,040 DEBUG quick_mplplots figures with 2.000000 days per page 2012-05-18 10:34:56,040 DEBUG quick_mplplots printing 8 pages 2012-05-18 10:34:56,040 DEBUG quick_mplplots yrange will be [1.000000, 1.000000] 2012-05-18 10:34:56,040 INFO quick_mplplots startdd is 124.0 2012-05-18 10:34:56,040 INFO quick_mplplots dt is 2.0 2012-05-18 10:34:56,592 DEBUG quick_mpl Ending plot: refl 2012-05-18 10:34:56,592 INFO quick_adcp --------------------------------------------- 2012-05-18 10:34:56,593 INFO quick_adcp step 16: find profile flags 2012-05-18 10:34:56,593 DEBUG quick_setup starting in /home/data/MV1206/proc/os75bb 2012-05-18 10:34:56,593 DEBUG quick_setup executing commands from /home/data/MV1206/proc/os75bb/edit 2012-05-18 10:34:56,593 DEBUG quick_setup running python command "run_autoedit_npy" 2012-05-18 10:34:56,593 DEBUG quick_npy Starting: autoedit 2012-05-18 10:34:56,755 DEBUG quick_npy Ending: autoedit 2012-05-18 10:34:56,755 INFO quick_adcp --------------------------------------------- 2012-05-18 10:34:56,756 INFO quick_adcp step 17: apply editing 2012-05-18 10:34:56,756 DEBUG quick_run starting in: /home/data/MV1206/proc/os75bb 2012-05-18 10:34:56,756 DEBUG quick_run executing commands from: edit 2012-05-18 10:34:56,757 DEBUG quick_run about to run /home/currents/programs/codas3/bin/lnx64/badbin ../adcpdb/a_mv abadbin_tmp.asc 2012-05-18 10:34:56,766 DEBUG quick_run about to run /home/currents/programs/codas3/bin/lnx64/set_lgb ../adcpdb/a_mv 30 2012-05-18 10:34:56,772 DEBUG quick_run about to run /home/currents/programs/codas3/bin/lnx64/setflags setflags.tmp 2012-05-18 10:34:56,804 DEBUG quick_run changing directories back to /home/data/MV1206/proc/os75bb 2012-05-18 10:34:56,805 INFO quick_adcp --------------------------------------------- 2012-05-18 10:34:56,805 INFO quick_adcp step 18: run nav steps 2012-05-18 10:34:56,805 DEBUG quick_setup nav/as_nav.tmp exists 2012-05-18 10:34:56,805 DEBUG quick_setup starting in /home/data/MV1206/proc/os75bb 2012-05-18 10:34:56,805 DEBUG quick_setup executing commands from /home/data/MV1206/proc/os75bb/nav 2012-05-18 10:34:56,805 DEBUG quick_setup running python command "as_nav" 2012-05-18 10:34:56,805 DEBUG quick_subs dbname: ../adcpdb/a_mv output: a_mv step_size: 1 ndepth: 20 time_ranges: separate year_base= 2012 option_list: pg_min= 50 navigation: reference_bins 2 to 20 end statistics: mean units= 0.01 /* cm/s instead of default m/s */ end flag_mask: ALL_BITS end end 2012/05/04 20:09:50 to 2012/05/18 10:29:48 /* the whole time range */ 2012-05-18 10:34:56,805 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/adcpsect as_nav.tmp 2012-05-18 10:34:56,848 DEBUG quick_setup starting in /home/data/MV1206/proc/os75bb 2012-05-18 10:34:56,848 DEBUG quick_setup executing commands from /home/data/MV1206/proc/os75bb/nav 2012-05-18 10:34:56,848 DEBUG quick_setup running python command "refabs" 2012-05-18 10:34:56,848 DEBUG quick_subs fix_file_type: simple reference_file: a_mv.nav fix_file: a_mv.gps output: a_mv.ref year_base= 2012 ensemble_length= 300 gap_tolerance= 10 2012-05-18 10:34:56,848 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/refabs refabs.tmp 2012-05-18 10:34:56,878 DEBUG quick_setup nav/smoothr.tmp exists 2012-05-18 10:34:56,879 DEBUG quick_setup starting in /home/data/MV1206/proc/os75bb 2012-05-18 10:34:56,879 DEBUG quick_setup executing commands from /home/data/MV1206/proc/os75bb/nav 2012-05-18 10:34:56,879 DEBUG quick_setup running python command "smoothr" 2012-05-18 10:34:56,879 DEBUG quick_subs reference_file: a_mv.nav refabs_output: a_mv.ref output: a_mv.sm filter_hwidth= 0.0208 min_filter_fraction= 0.5 max_gap_ratio= 0.05 max_gap_distance= 50 max_gap_time= 30 /* 0.5 minutes */ ensemble_time= 300 max_speed= 5.0 min_speed= 1.0 iterations= 5 fix_to_dr_limit= 0.00050 2012-05-18 10:34:56,879 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/smoothr smoothr.tmp 2012-05-18 10:34:57,023 INFO quick_adcp running refsm, for reflayer plots 2012-05-18 10:34:57,023 DEBUG quick_npy Starting: refsm 2012-05-18 10:34:57,138 INFO nav dtmin = -0.50 dtmax = 0.50 2012-05-18 10:34:57,255 DEBUG quick_npy Ending: refsm 2012-05-18 10:34:57,255 DEBUG quick_setup nav/putnav.tmp exists 2012-05-18 10:34:57,255 DEBUG quick_setup starting in /home/data/MV1206/proc/os75bb 2012-05-18 10:34:57,255 DEBUG quick_setup executing commands from /home/data/MV1206/proc/os75bb/nav 2012-05-18 10:34:57,255 DEBUG quick_setup running python command "putnav" 2012-05-18 10:34:57,256 DEBUG quick_subs dbname: ../adcpdb/a_mv position_file: a_mv_refsm.asc year_base= 2012 tolerance= 5 navigation_sources: gps end 2012-05-18 10:34:57,256 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/putnav putnav.tmp 2012-05-18 10:34:57,307 DEBUG quick_mpl Starting plot: nav 2012-05-18 10:34:57,586 DEBUG quick_mpl Ending plot: nav 2012-05-18 10:34:57,587 DEBUG quick_mpl Starting plot: refl 2012-05-18 10:34:57,671 DEBUG quick_mplplots found 13.590279 days of data 2012-05-18 10:34:57,671 DEBUG quick_mplplots start day is 124.000000 2012-05-18 10:34:57,671 DEBUG quick_mplplots figures with 2.000000 days per page 2012-05-18 10:34:57,671 DEBUG quick_mplplots printing 8 pages 2012-05-18 10:34:57,671 DEBUG quick_mplplots yrange will be [1.000000, 1.000000] 2012-05-18 10:34:57,671 INFO quick_mplplots startdd is 124.0 2012-05-18 10:34:57,671 INFO quick_mplplots dt is 2.0 2012-05-18 10:34:58,217 DEBUG quick_mpl Ending plot: refl 2012-05-18 10:34:58,217 INFO quick_adcp --------------------------------------------- 2012-05-18 10:34:58,217 INFO quick_adcp step 19: plot temperature 2012-05-18 10:34:58,218 DEBUG quick_setup edit/lst_temp.tmp exists 2012-05-18 10:34:58,218 DEBUG quick_setup starting in /home/data/MV1206/proc/os75bb 2012-05-18 10:34:58,218 DEBUG quick_setup executing commands from /home/data/MV1206/proc/os75bb/edit 2012-05-18 10:34:58,218 DEBUG quick_setup running python command "lst_temp" 2012-05-18 10:34:58,218 DEBUG quick_subs dbname: ../adcpdb/a_mv output: a_mv.tem step_size= 1 year_base= 2012 time_ranges: all 2012-05-18 10:34:58,218 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/lst_temp lst_temp.tmp 2012-05-18 10:34:58,244 DEBUG quick_mpl Starting plot: temp 2012-05-18 10:34:58,274 DEBUG quick_mplplots plotting 3917 points 2012-05-18 10:34:58,494 DEBUG quick_mpl Ending plot: temp 2012-05-18 10:34:58,494 INFO quick_adcp --------------------------------------------- 2012-05-18 10:34:58,494 INFO quick_adcp step 20: run calibration steps 2012-05-18 10:34:58,494 DEBUG quick_setup cal/botmtrk/lst_btrk.tmp exists 2012-05-18 10:34:58,494 DEBUG quick_setup starting in /home/data/MV1206/proc/os75bb 2012-05-18 10:34:58,495 DEBUG quick_setup executing commands from /home/data/MV1206/proc/os75bb/cal/botmtrk 2012-05-18 10:34:58,495 DEBUG quick_setup running python command "lst_btrk" 2012-05-18 10:34:58,495 DEBUG quick_subs dbname: ../../adcpdb/a_mv output: a_mv.btm step_size= 1 year_base= 2012 time_ranges: 2012/05/04 20:09:50 to 2012/05/18 10:29:48 /* whole time range */ 2012-05-18 10:34:58,495 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/lst_btrk lst_btrk.tmp 2012-05-18 10:34:58,508 DEBUG quick_setup cal/botmtrk/refabsbt.tmp exists 2012-05-18 10:34:58,508 DEBUG quick_setup starting in /home/data/MV1206/proc/os75bb 2012-05-18 10:34:58,508 DEBUG quick_setup executing commands from /home/data/MV1206/proc/os75bb/cal/botmtrk 2012-05-18 10:34:58,508 DEBUG quick_setup running python command "refabsbt" 2012-05-18 10:34:58,509 DEBUG quick_subs fix_file_type: simple reference_file: a_mv.btm fix_file: ../../nav/a_mv.gps output: a_mv.ref year_base= 2012 ensemble_length= 300 gap_tolerance= 60 2012-05-18 10:34:58,509 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/refabsbt refabsbt.tmp 2012-05-18 10:34:58,514 DEBUG quick_mpl Starting plot: btcal 2012-05-18 10:34:58,515 DEBUG quick_mplplots No data in a_mv.btm 2012-05-18 10:34:58,515 DEBUG quick_mplplots Returning from Btplot with no output 2012-05-18 10:34:58,515 DEBUG quick_mpl Ending plot: btcal 2012-05-18 10:34:58,515 DEBUG quick_setup nav/as_nav.tmp exists 2012-05-18 10:34:58,515 DEBUG quick_setup starting in /home/data/MV1206/proc/os75bb 2012-05-18 10:34:58,516 DEBUG quick_setup executing commands from /home/data/MV1206/proc/os75bb/nav 2012-05-18 10:34:58,516 DEBUG quick_setup running python command "as_nav" 2012-05-18 10:34:58,516 DEBUG quick_subs dbname: ../adcpdb/a_mv output: a_mv step_size: 1 ndepth: 20 time_ranges: separate year_base= 2012 option_list: pg_min= 50 navigation: reference_bins 2 to 20 end statistics: mean units= 0.01 /* cm/s instead of default m/s */ end flag_mask: ALL_BITS end end 2012/05/04 20:09:50 to 2012/05/18 10:29:48 /* the whole time range */ 2012-05-18 10:34:58,516 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/adcpsect as_nav.tmp 2012-05-18 10:34:58,557 DEBUG quick_setup cal/watertrk/timslip.tmp exists 2012-05-18 10:34:58,558 DEBUG quick_setup starting in /home/data/MV1206/proc/os75bb 2012-05-18 10:34:58,558 DEBUG quick_setup executing commands from /home/data/MV1206/proc/os75bb/cal/watertrk 2012-05-18 10:34:58,558 DEBUG quick_setup running python command "timslip" 2012-05-18 10:34:58,558 DEBUG quick_subs fix_file_type: simple fix_file: ../../nav/a_mv.gps reference_file: ../../nav/a_mv.nav output_file: a_mv_7.cal year_base= 2012 min_n_fixes= 7 /* 5 7 9 */ n_refs= 7 /* 5 7 9 */ i_ref_l0= 1 i_ref_l1= 2 /* 1 2 3 */ i_ref_r0= 5 /* 4 5 6 */ i_ref_r1= 6 /* 4 6 8 */ up_thresh= 3.0 /* m/s */ down_thresh= 3.0 /* m/s */ turn_speed= 2.0 /* m/s */ turn_thresh= 60 /* degrees */ dtmax= 360 /* seconds, for 300-second ensembles */ tolerance= 5.e-5 /* days, about 5 seconds */ grid: ensemble use_shifted_times? no 2012-05-18 10:34:58,558 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/timslip timslip.tmp 2012-05-18 10:34:58,574 DEBUG quick_mpl Starting plot: wtcal 2012-05-18 10:34:58,576 DEBUG quick_mplplots Found 63 calibration points 2012-05-18 10:34:59,190 DEBUG quick_mpl Ending plot: wtcal 2012-05-18 10:34:59,190 INFO quick_adcp --------------------------------------------- 2012-05-18 10:34:59,190 INFO quick_adcp step 21: adjust GPS position 2012-05-18 10:34:59,190 DEBUG quick_setup starting in /home/data/MV1206/proc/os75bb 2012-05-18 10:34:59,190 DEBUG quick_setup executing commands from /home/data/MV1206/proc/os75bb/cal/watertrk 2012-05-18 10:34:59,190 DEBUG quick_setup running python command "run_guess_xducerxy_npy" 2012-05-18 10:34:59,191 DEBUG quick_npy Starting: guess_xducerxy 2012-05-18 10:34:59,323 DEBUG quick_npy Ending: guess_xducerxy 2012-05-18 10:34:59,323 INFO quick_adcp --------------------------------------------- 2012-05-18 10:34:59,323 INFO quick_adcp step 22: extract matlab "allbins" 2012-05-18 10:34:59,323 DEBUG quick_asect ------------ step 18: make matlab files for plotting ------------- 2012-05-18 10:34:59,323 DEBUG quick_setup starting in /home/data/MV1206/proc/os75bb 2012-05-18 10:34:59,323 DEBUG quick_setup executing commands from /home/data/MV1206/proc/os75bb/vector 2012-05-18 10:34:59,323 DEBUG quick_setup running python command "timegrid" 2012-05-18 10:34:59,324 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/timegrid a_mv.tmp 2012-05-18 10:34:59,333 DEBUG quick_setup starting in /home/data/MV1206/proc/os75bb 2012-05-18 10:34:59,333 DEBUG quick_setup executing commands from /home/data/MV1206/proc/os75bb/vector 2012-05-18 10:34:59,334 DEBUG quick_setup running python command "as_vect" 2012-05-18 10:34:59,334 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/adcpsect as_vect.tmp 2012-05-18 10:34:59,409 DEBUG quick_asect done making vector matfiles 2012-05-18 10:34:59,410 DEBUG quick_setup starting in /home/data/MV1206/proc/os75bb 2012-05-18 10:34:59,410 DEBUG quick_setup executing commands from /home/data/MV1206/proc/os75bb/contour 2012-05-18 10:34:59,410 DEBUG quick_setup running python command "timegrid" 2012-05-18 10:34:59,410 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/timegrid a_mv.tmp 2012-05-18 10:34:59,420 DEBUG quick_setup starting in /home/data/MV1206/proc/os75bb 2012-05-18 10:34:59,420 DEBUG quick_setup executing commands from /home/data/MV1206/proc/os75bb/contour 2012-05-18 10:34:59,420 DEBUG quick_setup running python command "as_cont" 2012-05-18 10:34:59,420 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/adcpsect as_cont.tmp 2012-05-18 10:34:59,532 DEBUG quick_setup starting in /home/data/MV1206/proc/os75bb 2012-05-18 10:34:59,532 DEBUG quick_setup executing commands from /home/data/MV1206/proc/os75bb/contour 2012-05-18 10:34:59,532 DEBUG quick_setup about to run getmat -qrs -f allbins_ ../adcpdb/a_mv 2012-05-18 10:34:59,809 DEBUG quick_asect done running getmat with "allbins" 2012-05-18 10:34:59,810 INFO quick_adcp --------------------------------------------- 2012-05-18 10:34:59,810 INFO quick_adcp step 23: write "cruise_info.txt" 2012-05-18 10:34:59,833 INFO root copying NOFIG to /home/adcp/www/figures/os75bb_hcorr_plot.png 2012-05-18 10:34:59,834 INFO root copying NOFIG to /home/adcp/www/figures/thumbnails/os75bb_hcorr_plot_thumb.png 2012-05-18 10:34:59,834 DEBUG root matfile is contour/contour_uv.mat 2012-05-18 10:34:59,839 INFO root copying contour/contour_uv.mat to /home/adcp/www/data/os75bb_cont_uv.mat 2012-05-18 10:34:59,839 DEBUG root matfile is vector/vector_uv.mat 2012-05-18 10:34:59,839 INFO root copying vector/vector_uv.mat to /home/adcp/www/data/os75bb_vect_uv.mat 2012-05-18 10:34:59,840 DEBUG root matfile is contour/contour_xy.mat 2012-05-18 10:34:59,840 INFO root copying contour/contour_xy.mat to /home/adcp/www/data/os75bb_cont_xy.mat 2012-05-18 10:34:59,840 DEBUG root matfile is vector/vector_xy.mat 2012-05-18 10:34:59,840 INFO root copying vector/vector_xy.mat to /home/adcp/www/data/os75bb_vect_xy.mat 2012-05-18 10:34:59,840 DEBUG root about to copy file edit/a_mv.tem to /home/adcp/www/data/os75bb_temp.asc 2012-05-18 10:34:59,841 INFO root copying edit/a_mv.tem to /home/adcp/www/data/os75bb_temp.asc 2012-05-18 10:35:00,436 DEBUG root about to copy netcdf file /home/data/MV1206/proc/os75bb/contour/os75bb.nc to /home/adcp/www/data/os75bb.nc 2012-05-18 10:35:00,452 INFO root copying edit/a_mv.tem to /home/adcp/www/data/os75bb.nc 2012-05-18 10:35:00,479 INFO root generating pingstats for os75bb 2012-05-18 10:35:00,479 INFO root Ending quick_adcp.py