* Sea-Bird SBE 9 Data File:
* FileName = C:\CTD\RR1109\1109_021.hex
* Software Version Seasave V 7.21d
* Temperature SN = 4588
* Conductivity SN = 3430
* Number of Bytes Per Scan = 44
* Number of Voltage Words = 5
* Number of Scans Averaged by the Deck Unit = 1
* Append System Time to Every Scan
* System UpLoad Time = Jun 24 2011 14:12:02
* NMEA Latitude = 20 13.02 N
* NMEA Longitude = 121 47.30 E
* NMEA UTC (Time) = Jun 24 2011  14:12:03
* Store Lat/Lon Data = Append to Every Scan
** Cruise # / PI RR1108  Alford  (St Laurent, IWISE)
** Ship R/V Revelle
** Date & Time
** Station & Cast Time Series E of A1
** Position M2b
* System UTC = Jun 24 2011 14:12:02
# nquan = 19
# nvalues = 6                           
# units = specified
# name 0 = latitude: Latitude [deg]
# name 1 = longitude: Longitude [deg]
# name 2 = t090C: Temperature [ITS-90, deg C]
# name 3 = c0S/m: Conductivity [S/m]
# name 4 = sal00: Salinity, Practical [PSU]
# name 5 = depSM: Depth [salt water, m]
# name 6 = prDM: Pressure, Digiquartz [db]
# name 7 = t190C: Temperature, 2 [ITS-90, deg C]
# name 8 = c1S/m: Conductivity, 2 [S/m]
# name 9 = sal11: Salinity, Practical, 2 [PSU]
# name 10 = bat: Beam Attenuation, Chelsea/Seatech [1/m]
# name 11 = xmiss: Beam Transmission, Chelsea/Seatech [%]
# name 12 = altM: Altimeter [m]
# name 13 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/kg]
# name 14 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 15 = spar: SPAR/Surface Irradiance
# name 16 = pumps: Pump Status
# name 17 = nbin: number of scans per bin
# name 18 = flag: flag
# span 0 =   20.21712,   20.21714       
# span 1 =  121.78836,  121.78838       
# span 2 =    29.1295,    29.1312       
# span 3 =   5.505148,   5.641425       
# span 4 =    33.3724,    34.3025       
# span 5 =      1.222,      3.657       
# span 6 =      1.229,      3.680       
# span 7 =    29.1257,    29.1303       
# span 8 =   5.503129,   5.641757       
# span 9 =    33.3591,    34.3054       
# span 10 =     0.5372,     2.6356      
# span 11 =    53.9534,    87.4331      
# span 12 =       1.49,      98.71      
# span 13 =    183.242,    228.332      
# span 14 =     4.1912,     5.2222      
# span 15 = 6.5258e+00, 6.8120e+00      
# span 16 =          1,          1      
# span 17 =         17,        418      
# span 18 = 0.0000e+00, 0.0000e+00      
# interval = decibars: 1                
# start_time = Jun 24 2011 14:12:02 [System UTC, first data scan.]
# bad_flag = -9.990e-29
# <Sensors count="15" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4588</SerialNumber>
#       <CalibrationDate>11-Feb-2011 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>4.35606486e-003</A>
#       <B>6.39038621e-004</B>
#       <C>2.15660660e-005</C>
#       <D>1.91690018e-006</D>
#       <F0_Old>1000.000</F0_Old>
#       <G>4.35586711e-003</G>
#       <H>6.38829033e-004</H>
#       <I>2.15342664e-005</I>
#       <J>1.91546617e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>3430</SerialNumber>
#       <CalibrationDate>17-Feb-11 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.00745152e+001</G>
#         <H>1.54099043e+000</H>
#         <I>-1.89692698e-003</I>
#         <J>2.32100199e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0401</SerialNumber>
#       <CalibrationDate>12-Apr-11 </CalibrationDate>
#       <C1>-4.588163e+004</C1>
#       <C2>1.989810e-001</C2>
#       <C3>1.408190e-002</C3>
#       <D1>3.950300e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>2.998526e+001</T1>
#       <T2>-2.557400e-004</T2>
#       <T3>4.268350e-006</T3>
#       <T4>1.671990e-009</T4>
#       <Slope>0.99997432</Slope>
#       <Offset>1.70503</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.117000e-002</AD590M>
#       <AD590B>-8.668320e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4486</SerialNumber>
#       <CalibrationDate>11-Feb-2011 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>4.42190259e-003</A>
#       <B>6.49910099e-004</B>
#       <C>2.33578639e-005</C>
#       <D>2.03676795e-006</D>
#       <F0_Old>1000.000</F0_Old>
#       <G>4.42168302e-003</G>
#       <H>6.49691882e-004</H>
#       <I>2.33248106e-005</I>
#       <J>2.03524499e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>1880</SerialNumber>
#       <CalibrationDate>16-Feb-11 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-4.13343952e+000</G>
#         <H>5.04919612e-001</H>
#         <I>-7.10504771e-004</I>
#         <J>6.00439665e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Fluorometer, Seapoint -->
#     <FluoroSeapointSensor SensorID="11" >
#       <SerialNumber>2775</SerialNumber>
#       <CalibrationDate>n/a</CalibrationDate>
#       <!-- The following is an array index, not the actual gain setting. -->
#       <GainSetting>2</GainSetting>
#       <Offset>0.000</Offset>
#     </FluoroSeapointSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Free -->
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Transmissometer, Chelsea/Seatech -->
#     <TransChelseaSeatechWetlabCStarSensor SensorID="59" >
#       <SerialNumber>CTS1094</SerialNumber>
#       <CalibrationDate>5 Jan 2011</CalibrationDate>
#       <M>19.3180</M>
#       <B>-1.1590</B>
#       <PathLength>0.250</PathLength>
#     </TransChelseaSeatechWetlabCStarSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>41832</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>15.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Free -->
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>0255</SerialNumber>
#       <CalibrationDate>05-Apr-11p</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>5.4560e-001</Soc>
#         <offset>-0.5067</offset>
#         <A>-2.6633e-003</A>
#         <B> 8.9742e-005</B>
#         <C>-1.8948e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92630e-004</D1>
#         <D2>-4.64800e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.1800</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Free -->
#   </sensor>
#   <sensor Channel="14" >
#     <!-- SPAR voltage, Unavailable -->
#   </sensor>
#   <sensor Channel="15" >
#     <!-- SPAR voltage, SPAR/Surface Irradiance -->
#     <SPAR_Sensor SensorID="51" >
#       <SerialNumber>QSR-2200  20227</SerialNumber>
#       <CalibrationDate>02-Feb-2006</CalibrationDate>
#       <ConversionFactor>1781.54000000</ConversionFactor>
#       <RatioMultiplier>1.00000000</RatioMultiplier>
#     </SPAR_Sensor>
#   </sensor>
# </Sensors>
# datcnv_date = Feb 08 2018 01:15:02, 7.23.2 [datcnv_vars = 17]
# datcnv_in = Z:\data\r2r\cruise\RR1109\fileset\103746\data\1109_021.hex Z:\data\r2r\cruise\RR1109\fileset\103746\data\1109_021.XMLCON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# datcnv_ox_tau_correction = yes
# celltm_date = Feb 08 2018 01:15:03, 7.23.2
# celltm_in = Z:\data\local\cruise\RR1109\products\r2rctd\1109_021.cnv
# celltm_alpha = 0.0300, 0.0300
# celltm_tau = 7.0000, 7.0000
# celltm_temp_sensor_use_for_cond = primary, secondary
# binavg_date = Feb 08 2018 01:15:03, 7.23.2
# binavg_in = Z:\data\local\cruise\RR1109\products\r2rctd\1109_021.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
   20.21712  121.78838    29.1303   5.625093    34.1918      2.009      2.022    29.1257   5.625241    34.1960     0.5372    87.4331       1.83    228.332     5.2222 6.6975e+00          1         38 0.0000e+00
   20.21713  121.78838    29.1308   5.638567    34.2834      2.877      2.895    29.1278   5.637593    34.2788     0.5572    86.9988       8.73    183.242     4.1912 6.8120e+00          1        418 0.0000e+00
   20.21712  121.78838    29.1311   5.641425    34.3025      3.657      3.680    29.1302   5.641757    34.3054     0.5717    86.6811       1.49    185.040     4.2324 6.7977e+00          1         24 0.0000e+00
   20.21712  121.78838    29.1312   5.640752    34.2980      3.057      3.076    29.1303   5.624296    34.1861     0.7185    83.5939      68.76    187.399     4.2863 6.7548e+00          1         19 0.0000e+00
   20.21714  121.78838    29.1309   5.505148    33.3724      1.987      1.999    29.1302   5.503129    33.3591     2.6356    53.9534      98.71    189.054     4.3212 6.5258e+00          1         17 0.0000e+00
   20.21712  121.78836    29.1295   5.614497    34.1204      1.222      1.229    29.1286   5.622921    34.1786     1.5465    73.8272      25.06    188.609     4.3134 6.7483e+00          1         88 0.0000e+00