* Sea-Bird SBE 9 Data File:
* FileName = C:\data\ctd\at2604009_test.hex
* Software Version Seasave V 7.21f
* Temperature SN = 2265
* Conductivity SN = 2645
* Number of Bytes Per Scan = 44
* Number of Voltage Words = 5
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Aug 26 2013 02:31:50
* NMEA Latitude = 46 46.97 N
* NMEA Longitude = 125 15.74 W
* NMEA UTC (Time) = Aug 26 2013  02:32:55
* Store Lat/Lon Data = Append to Every Scan
* System UTC = Aug 26 2013 02:31:50
# nquan = 19
# nvalues = 2                           
# units = specified
# name 0 = latitude: Latitude [deg]
# name 1 = longitude: Longitude [deg]
# name 2 = timeS: Time, Elapsed [seconds]
# name 3 = t090C: Temperature [ITS-90, deg C]
# name 4 = c0S/m: Conductivity [S/m]
# name 5 = sal00: Salinity, Practical [PSU]
# name 6 = depSM: Depth [salt water, m]
# name 7 = prDM: Pressure, Digiquartz [db]
# name 8 = t190C: Temperature, 2 [ITS-90, deg C]
# name 9 = c1S/m: Conductivity, 2 [S/m]
# name 10 = sal11: Salinity, Practical, 2 [PSU]
# name 11 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/kg]
# name 12 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 13 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
# name 14 = altM: Altimeter [m]
# name 15 = spar: SPAR/Surface Irradiance
# name 16 = pumps: Pump Status
# name 17 = nbin: number of scans per bin
# name 18 = flag: flag
# span 0 =   46.78290,   46.78290       
# span 1 = -125.26230, -125.26230       
# span 2 =      0.836,      6.561       
# span 3 =    17.5024,    17.5114       
# span 4 =   4.165380,   4.166168       
# span 5 =    31.7819,    31.7823       
# span 6 =     13.276,     13.502       
# span 7 =     13.387,     13.615       
# span 8 =    17.5109,    17.5130       
# span 9 =   4.166141,   4.166379       
# span 10 =    31.7822,    31.7825      
# span 11 =    239.126,    239.501      
# span 12 =     5.4771,     5.4857      
# span 13 =     0.1079,     0.1102      
# span 14 =      98.76,      98.76      
# span 15 = 3.4556e+00, 4.3074e+00      
# span 16 =          1,          1      
# span 17 =         40,        174      
# span 18 = 0.0000e+00, 0.0000e+00      
# interval = decibars: 1                
# start_time = Aug 26 2013 02:32:55 [NMEA time, first data scan]
# bad_flag = -9.990e-29
# <Sensors count="15" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>2265</SerialNumber>
#       <CalibrationDate>30-Jun-12</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.33191569e-003</G>
#       <H>6.44063544e-004</H>
#       <I>2.37285084e-005</I>
#       <J>2.26551448e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>2645</SerialNumber>
#       <CalibrationDate>03-Jul-12</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.02340700e+001</G>
#         <H>1.41384268e+000</H>
#         <I>-1.16258107e-003</I>
#         <J>1.66811839e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>58939-0383</SerialNumber>
#       <CalibrationDate>28-Dec-10</CalibrationDate>
#       <C1>-4.928049e+004</C1>
#       <C2>-5.591409e-001</C2>
#       <C3>1.510530e-002</C3>
#       <D1>3.944700e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.017493e+001</T1>
#       <T2>-4.671701e-004</T2>
#       <T3>3.967900e-006</T3>
#       <T4>3.098920e-009</T4>
#       <Slope>0.99998000</Slope>
#       <Offset>2.55200</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.135000e-002</AD590M>
#       <AD590B>-8.132450e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>2446</SerialNumber>
#       <CalibrationDate>30-Jun-12</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.37259088e-003</G>
#       <H>6.48545489e-004</H>
#       <I>2.39564675e-005</I>
#       <J>2.23596204e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>3009</SerialNumber>
#       <CalibrationDate>07-Jul-12</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.04869875e+001</G>
#         <H>1.48793870e+000</H>
#         <I>3.04290966e-004</I>
#         <J>5.41928056e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>0072</SerialNumber>
#       <CalibrationDate>16-Oct-12</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>4.4040e-001</Soc>
#         <offset>-0.5102</offset>
#         <A>-1.9717e-003</A>
#         <B> 9.1213e-005</B>
#         <C>-1.0816e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 2.4800</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Free -->
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Fluorometer, WET Labs ECO-AFL/FL -->
#     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
#       <SerialNumber>FLNTURTD-149</SerialNumber>
#       <CalibrationDate>6-May-2010</CalibrationDate>
#       <ScaleFactor>1.54000000e+001</ScaleFactor>
#       <!-- Dark output -->
#       <Vblank>0.0600</Vblank>
#     </FluoroWetlabECO_AFL_FL_Sensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, User Polynomial -->
#     <UserPolynomialSensor SensorID="61" >
#       <SerialNumber>FLNTURTD-149</SerialNumber>
#       <CalibrationDate>1-Nov-2004</CalibrationDate>
#       <SensorName>Turbidity</SensorName>
#       <A0>-0.74000000</A0>
#       <A1>5.00000000</A1>
#       <A2>0.00000000</A2>
#       <A3>0.00000000</A3>
#     </UserPolynomialSensor>
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>852</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>15.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Free -->
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Free -->
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Transmissometer, WET Labs C-Star -->
#     <WET_LabsCStar SensorID="71" >
#       <SerialNumber>CST758DR</SerialNumber>
#       <CalibrationDate>13-July-2013 deck calib</CalibrationDate>
#       <M>24.5218</M>
#       <B>-1.3774</B>
#       <PathLength>0.250</PathLength>
#     </WET_LabsCStar>
#   </sensor>
#   <sensor Channel="14" >
#     <!-- SPAR voltage, Unavailable -->
#   </sensor>
#   <sensor Channel="15" >
#     <!-- SPAR voltage, SPAR/Surface Irradiance -->
#     <SPAR_Sensor SensorID="51" >
#       <SerialNumber>6383</SerialNumber>
#       <CalibrationDate>05/12/2012</CalibrationDate>
#       <ConversionFactor>1439.90000000</ConversionFactor>
#       <RatioMultiplier>1.00000000</RatioMultiplier>
#     </SPAR_Sensor>
#   </sensor>
# </Sensors>
# datcnv_date = Jan 22 2018 21:56:54, 7.23.2 [datcnv_vars = 17]
# datcnv_in = Z:\data\r2r\cruise\AT26-04\fileset\111174\data\at2604009_test.hex Z:\data\r2r\cruise\AT26-04\fileset\111174\data\at2604009_test.XMLCON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# datcnv_ox_tau_correction = yes
# celltm_date = Jan 22 2018 21:56:55, 7.23.2
# celltm_in = Z:\data\local\cruise\AT26-04\products\r2rctd\at2604009_test.cnv
# celltm_alpha = 0.0300, 0.0300
# celltm_tau = 7.0000, 7.0000
# celltm_temp_sensor_use_for_cond = primary, secondary
# binavg_date = Jan 22 2018 21:56:55, 7.23.2
# binavg_in = Z:\data\local\cruise\AT26-04\products\r2rctd\at2604009_test.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
   46.78290 -125.26230      0.836    17.5024   4.165380    31.7823     13.502     13.615    17.5130   4.166379    31.7825    239.501     5.4857     0.1102      98.76 4.3074e+00          1         40 0.0000e+00
   46.78290 -125.26230      6.561    17.5114   4.166168    31.7819     13.276     13.387    17.5109   4.166141    31.7822    239.126     5.4771     0.1079      98.76 3.4556e+00          1        174 0.0000e+00