I/O log for Teledyne RDI VmDas Version 1.46

[2010/05/26, 02:14:20.430]: NMEA 1 - Opening serial port... Successful
[2010/05/26, 02:14:20.476]: NMEA 1 - Receiving unrecognizable data
[2010/05/26, 02:14:21.508]: NMEA 1 - Receving correct type of data
[2010/05/26, 02:14:21.883]: 

Broadband ADCP Version 5.61

RD Instruments (c) 1991-2004

All rights reserved.

>
[2010/05/26, 02:14:21.961]: CR1
[2010/05/26, 02:14:22.070]: CR1

[Parameters set to FACTORY defaults]

>
[2010/05/26, 02:14:22.070]: TE00000000
[2010/05/26, 02:14:22.148]: TE00000000

>
[2010/05/26, 02:14:22.164]: -->Sending commands from ADCP command file...


[2010/05/26, 02:14:22.164]: cr1
[2010/05/26, 02:14:22.289]: cr1

[Parameters set to FACTORY defaults]

>
[2010/05/26, 02:14:22.289]: WP00001
[2010/05/26, 02:14:22.351]: WP00001

>
[2010/05/26, 02:14:22.367]: WM1
[2010/05/26, 02:14:22.430]: WM1

>
[2010/05/26, 02:14:22.430]: WB1
[2010/05/26, 02:14:22.492]: WB1

>
[2010/05/26, 02:14:22.539]: WS100
[2010/05/26, 02:14:22.664]: WS100

>
[2010/05/26, 02:14:22.664]: WF200
[2010/05/26, 02:14:22.726]: WF200

>
[2010/05/26, 02:14:22.726]: WN020
[2010/05/26, 02:14:22.789]: WN020

>
[2010/05/26, 02:14:22.805]: WV330
[2010/05/26, 02:14:22.867]: WV330

>
[2010/05/26, 02:14:22.867]: BP001
[2010/05/26, 02:14:22.914]: BP001

>
[2010/05/26, 02:14:22.930]: BX700
[2010/05/26, 02:14:22.992]: BX700

>
[2010/05/26, 02:14:22.992]: WD111100000
[2010/05/26, 02:14:23.070]: WD111100000

>
[2010/05/26, 02:14:23.070]: TP000150
[2010/05/26, 02:14:23.148]: TP000150

>
[2010/05/26, 02:14:23.148]: TE00000300
[2010/05/26, 02:14:23.211]: TE00000300

>
[2010/05/26, 02:14:23.211]: EZ1022201
[2010/05/26, 02:14:23.273]: EZ1022201

>
[2010/05/26, 02:14:23.289]: EX00000
[2010/05/26, 02:14:23.351]: EX00000

>
[2010/05/26, 02:14:23.351]: ED00015
[2010/05/26, 02:14:23.430]: ED00015

>
[2010/05/26, 02:14:23.430]: EA-03850
[2010/05/26, 02:14:23.492]: EA-03850

>
[2010/05/26, 02:14:23.508]: ES00
[2010/05/26, 02:14:23.555]: ES00

>
[2010/05/26, 02:14:23.555]: CK
[2010/05/26, 02:14:24.117]: CK

[Parameters saved as USER defaults]

>
[2010/05/26, 02:14:24.133]: cb411
[2010/05/26, 02:14:24.195]: cb411

>
[2010/05/26, 02:14:24.226]: -->Retrieving beam correction matrix...


[2010/05/26, 02:14:24.226]: PS3
[2010/05/26, 02:14:25.242]: PS3

Beam Width:   1.6 degrees



Beam     Elevation     Azimuth

  1         -60.00      -90.00

  2         -60.00       90.00

  3         -60.00        0.00

  4         -60.00      180.00



Beam Directional Matrix (Downlooking):

    -0.5000     0.0000     0.8660     0.0000

     0.5000     0.0000     0.8660     0.0000

     0.0000     0.5000     0.8660     0.0000

     0.0000    -0.5000     0.8660     0.0000



Instrument Transformation Matrix:

    -1.0000     1.0000     0.0000     0.0000

     0.0000     0.0000     1.0000    -1.0000

     0.2887     0.2887     0.2887     0.2887

     0.7071     0.7071    -0.7071    -0.7071

>
[2010/05/26, 02:14:25.273]: 
-->Setting manual ping mode...


[2010/05/26, 02:14:25.273]: CF?
[2010/05/26, 02:14:25.398]: CF?

CF = 11010 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec)

>
[2010/05/26, 02:14:25.414]: CF 01110
[2010/05/26, 02:14:25.476]: CF 01110

>
[2010/05/26, 02:14:25.508]: 
-->Setting beam radial output mode...


[2010/05/26, 02:14:25.508]: EX00000
[2010/05/26, 02:14:25.586]: EX00000

>
[2010/05/26, 02:14:25.820]: CS

[2010/05/26, 02:14:25.851]: PRIMARY GGA data will be stored in the NAV field starting with ens 1
[2010/05/26, 02:14:25.883]: PRIMARY NMEA Heading data will be stored in the NAV field starting with ens 1
[2010/05/26, 02:14:25.898]: PRIMARY NMEA Tilt data will be stored in the NAV field starting with ens 1
[2010/05/28, 01:51:16.273]: 
[2010/05/28, 01:51:16.320]: CZ
[2010/05/28, 01:51:16.320]: