[BREAK Wakeup B] WorkHorse Broadband ADCP Version 16.28 RD Instruments (c) 1996-2005 All Rights Reserved. The fault log has been disabled. Use the FC command to clear the fault log. >TS? TS = 10/09/19,17:26:56 --- Time Set (yr/mon/day,hour:min:sec) >TS10/09/19, 17:26:53 >CR1 [Parameters set to FACTORY defaults] >WD 111 000 000 >TE00:00:00.00 >CF11110 >EX00000 >EZ1011101 >EA04500 >WP1 >WN32 >WS400 >WF400 >BP0 >BX2000 >WB0 >WV550 >TP00:00.80 >B? BP = 000 ----------------- Pings per Ensemble >W? WD = 111 000 000 --------- Data Out (Vel;Cor;Amp PG;St;P0 P1;P2;P3) WF = 0400 ---------------- Blank After Transmit (cm) WN = 032 ----------------- Number of depth cells (1-255) WP = 00001 --------------- Pings per Ensemble (0-16384) WS = 0400 ---------------- Depth Cell Size (cm) WV = 550 ----------------- Mode 1 Ambiguity Vel (cm/s radial) WZ = 010 ----------------- Mode 5 Ambiguity Velocity (cm/s radial) >E? EA = +04500 -------------- Heading Alignment (1/100 deg) EB = +00000 -------------- Heading Bias (1/100 deg) ED = 00000 --------------- Transducer Depth (0 - 65535 dm) ES = 35 ------------------ Salinity (0-40 pp thousand) EX = 00000 --------------- Coord Transform (Xform:Type; Tilts; 3Bm; Map) EZ = 1011101 ------------- Sensor Source (C;D;H;P;R;S;T) >C? CB = 411 ----------------- Serial Port Control (Baud [4=9600]; Par; Stop) CC = 000 000 000 --------- Choose External Devices (x;x;x x;x;x x;x;SBMC) CF = 11110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec) CK ----------------------- Keep Parameters as USER Defaults CP = 0 ------------------- PolledMode (1=ON, 0=OFF; BREAK resets) CR # --------------------- Retrieve Parameters (0 = USER, 1 = FACTORY) CS ----------------------- Go (Start Pinging) CZ ----------------------- Power Down Instrument >T? TE = 00:00:00.00 --------- Time per Ensemble (hrs:min:sec.sec/100) TF = **/**/**,**:**:** --- Time of First Ping (yr/mon/day,hour:min:sec) TG = ****/**/**,**:**:** - Time of First Ping (CCYY/MM/DD,hh:mm:ss) TP = 00:00.80 ------------ Time per Ping (min:sec.sec/100) TS = 10/09/19,17:26:55 --- Time Set (yr/mon/day,hour:min:sec) TT = 2010/09/19,17:26:55 - Time Set (CCYY/MM/DD,hh:mm:ss) >PS0 Instrument S/N: 0 Frequency: 307200 HZ Configuration: 4 BEAM, JANUS Match Layer: 10 Beam Angle: 20 DEGREES Beam Pattern: CONVEX Orientation: DOWN Sensor(s): HEADING TILT 1 TILT 2 TEMPERATURE Temp Sens Offset: -0.28 degrees C CPU Firmware: 16.28 [0] Boot Code Ver: Required: 1.13 Actual: 1.13 DEMOD #1 Ver: ad48, Type: 1f DEMOD #2 Ver: ad48, Type: 1f PWRTIMG Ver: 85d3, Type: 7 Board Serial Number Data: 7A 00 00 00 86 80 62 09 PIO727-3000-00C B1 00 00 00 7E 69 3A 09 CPU727-2000-00J 1D 00 00 00 86 BE B5 09 DSP727-2001-04G 29 00 00 00 86 8D 8B 09 REC727-1000-04E >CF11110 > >CB611 > [BREAK Wakeup B] WorkHorse Broadband ADCP Version 16.28 RD Instruments (c) 1996-2005 All Rights Reserved. The fault log has been disabled. Use the FC command to clear the fault log. >TS? TS = 10/09/19,17:27:30 --- Time Set (yr/mon/day,hour:min:sec) > Powering Down [BREAK Wakeup B] WorkHorse Broadband ADCP Version 16.28 RD Instruments (c) 1996-2005 All Rights Reserved. The fault log has been disabled. Use the FC command to clear the fault log. >TS? TS = 10/09/21,13:18:05 --- Time Set (yr/mon/day,hour:min:sec) >TS10/09/21, 13:18:05 >CR1 [Parameters set to FACTORY defaults] >WD 111 000 000 >TE00:00:00.00 >CF11110 >EX00000 >EZ1011101 >EA04500 >WP1 >WN32 >WS400 >WF400 >BP0 >BX2000 >WB0 >WV550 >TP00:00.80 >B? BP = 000 ----------------- Pings per Ensemble >W? WD = 111 000 000 --------- Data Out (Vel;Cor;Amp PG;St;P0 P1;P2;P3) WF = 0400 ---------------- Blank After Transmit (cm) WN = 032 ----------------- Number of depth cells (1-255) WP = 00001 --------------- Pings per Ensemble (0-16384) WS = 0400 ---------------- Depth Cell Size (cm) WV = 550 ----------------- Mode 1 Ambiguity Vel (cm/s radial) WZ = 010 ----------------- Mode 5 Ambiguity Velocity (cm/s radial) >E? EA = +04500 -------------- Heading Alignment (1/100 deg) EB = +00000 -------------- Heading Bias (1/100 deg) ED = 00000 --------------- Transducer Depth (0 - 65535 dm) ES = 35 ------------------ Salinity (0-40 pp thousand) EX = 00000 --------------- Coord Transform (Xform:Type; Tilts; 3Bm; Map) EZ = 1011101 ------------- Sensor Source (C;D;H;P;R;S;T) >C? CB = 411 ----------------- Serial Port Control (Baud [4=9600]; Par; Stop) CC = 000 000 000 --------- Choose External Devices (x;x;x x;x;x x;x;SBMC) CF = 11110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec) CK ----------------------- Keep Parameters as USER Defaults CP = 0 ------------------- PolledMode (1=ON, 0=OFF; BREAK resets) CR # --------------------- Retrieve Parameters (0 = USER, 1 = FACTORY) CS ----------------------- Go (Start Pinging) CZ ----------------------- Power Down Instrument >T? TE = 00:00:00.00 --------- Time per Ensemble (hrs:min:sec.sec/100) TF = **/**/**,**:**:** --- Time of First Ping (yr/mon/day,hour:min:sec) TG = ****/**/**,**:**:** - Time of First Ping (CCYY/MM/DD,hh:mm:ss) TP = 00:00.80 ------------ Time per Ping (min:sec.sec/100) TS = 10/09/21,13:18:08 --- Time Set (yr/mon/day,hour:min:sec) TT = 2010/09/21,13:18:08 - Time Set (CCYY/MM/DD,hh:mm:ss) >PS0 Instrument S/N: 0 Frequency: 307200 HZ Configuration: 4 BEAM, JANUS Match Layer: 10 Beam Angle: 20 DEGREES Beam Pattern: CONVEX Orientation: DOWN Sensor(s): HEADING TILT 1 TILT 2 TEMPERATURE Temp Sens Offset: -0.28 degrees C CPU Firmware: 16.28 [0] Boot Code Ver: Required: 1.13 Actual: 1.13 DEMOD #1 Ver: ad48, Type: 1f DEMOD #2 Ver: ad48, Type: 1f PWRTIMG Ver: 85d3, Type: 7 Board Serial Number Data: 7A 00 00 00 86 80 62 09 PIO727-3000-00C B1 00 00 00 7E 69 3A 09 CPU727-2000-00J 1D 00 00 00 86 BE B5 09 DSP727-2001-04G 29 00 00 00 86 8D 8B 09 REC727-1000-04E >CF11110 > >CB611 > [BREAK Wakeup B] WorkHorse Broadband ADCP Version 16.28 RD Instruments (c) 1996-2005 All Rights Reserved. The fault log has been disabled. Use the FC command to clear the fault log. >TS? TS = 10/09/28,15:02:59 --- Time Set (yr/mon/day,hour:min:sec) > Powering Down [BREAK Wakeup B] WorkHorse Broadband ADCP Version 16.28 RD Instruments (c) 1996-2005 All Rights Reserved. The fault log has been disabled. Use the FC command to clear the fault log. >TS? TS = 10/09/29,12:35:00 --- Time Set (yr/mon/day,hour:min:sec) >TS10/09/29, 12:34:58 >CR1 [Parameters set to FACTORY defaults] >WD 111 000 000 >TE00:00:00.00 >CF11110 >EX00000 >EZ1011101 >EA04500 >WP1 >WN32 >WS400 >WF400 >BP0 >BX2000 >WB0 >WV550 >TP00:00.80 >B? BP = 000 ----------------- Pings per Ensemble >W? WD = 111 000 000 --------- Data Out (Vel;Cor;Amp PG;St;P0 P1;P2;P3) WF = 0400 ---------------- Blank After Transmit (cm) WN = 032 ----------------- Number of depth cells (1-255) WP = 00001 --------------- Pings per Ensemble (0-16384) WS = 0400 ---------------- Depth Cell Size (cm) WV = 550 ----------------- Mode 1 Ambiguity Vel (cm/s radial) WZ = 010 ----------------- Mode 5 Ambiguity Velocity (cm/s radial) >E? EA = +04500 -------------- Heading Alignment (1/100 deg) EB = +00000 -------------- Heading Bias (1/100 deg) ED = 00000 --------------- Transducer Depth (0 - 65535 dm) ES = 35 ------------------ Salinity (0-40 pp thousand) EX = 00000 --------------- Coord Transform (Xform:Type; Tilts; 3Bm; Map) EZ = 1011101 ------------- Sensor Source (C;D;H;P;R;S;T) >C? CB = 411 ----------------- Serial Port Control (Baud [4=9600]; Par; Stop) CC = 000 000 000 --------- Choose External Devices (x;x;x x;x;x x;x;SBMC) CF = 11110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec) CK ----------------------- Keep Parameters as USER Defaults CP = 0 ------------------- PolledMode (1=ON, 0=OFF; BREAK resets) CR # --------------------- Retrieve Parameters (0 = USER, 1 = FACTORY) CS ----------------------- Go (Start Pinging) CZ ----------------------- Power Down Instrument >T? TE = 00:00:00.00 --------- Time per Ensemble (hrs:min:sec.sec/100) TF = **/**/**,**:**:** --- Time of First Ping (yr/mon/day,hour:min:sec) TG = ****/**/**,**:**:** - Time of First Ping (CCYY/MM/DD,hh:mm:ss) TP = 00:00.80 ------------ Time per Ping (min:sec.sec/100) TS = 10/09/29,12:35:01 --- Time Set (yr/mon/day,hour:min:sec) TT = 2010/09/29,12:35:01 - Time Set (CCYY/MM/DD,hh:mm:ss) >PS0 Instrument S/N: 0 Frequency: 307200 HZ Configuration: 4 BEAM, JANUS Match Layer: 10 Beam Angle: 20 DEGREES Beam Pattern: CONVEX Orientation: DOWN Sensor(s): HEADING TILT 1 TILT 2 TEMPERATURE Temp Sens Offset: -0.28 degrees C CPU Firmware: 16.28 [0] Boot Code Ver: Required: 1.13 Actual: 1.13 DEMOD #1 Ver: ad48, Type: 1f DEMOD #2 Ver: ad48, Type: 1f PWRTIMG Ver: 85d3, Type: 7 Board Serial Number Data: 7A 00 00 00 86 80 62 09 PIO727-3000-00C B1 00 00 00 7E 69 3A 09 CPU727-2000-00J 1D 00 00 00 86 BE B5 09 DSP727-2001-04G 29 00 00 00 86 8D 8B 09 REC727-1000-04E >CF11110 > >CB611 > [BREAK Wakeup B] WorkHorse Broadband ADCP Version 16.28 RD Instruments (c) 1996-2005 All Rights Reserved. The fault log has been disabled. Use the FC command to clear the fault log. >TS? TS = 10/10/07,10:49:18 --- Time Set (yr/mon/day,hour:min:sec) > Powering Down [BREAK Wakeup B] WorkHorse Broadband ADCP Version 16.28 RD Instruments (c) 1996-2005 All Rights Reserved. The fault log has been disabled. Use the FC command to clear the fault log. >TS? TS = 10/10/08,03:04:04 --- Time Set (yr/mon/day,hour:min:sec) >TS10/10/08, 03:04:00 >CR1 [Parameters set to FACTORY defaults] >WD 111 000 000 >TE00:00:00.00 >CF11110 >EX00000 >EZ1011101 >EA04500 >WP1 >WN32 >WS400 >WF400 >BP0 >BX2000 >WB0 >WV550 >TP00:00.80 >B? BP = 000 ----------------- Pings per Ensemble >W? WD = 111 000 000 --------- Data Out (Vel;Cor;Amp PG;St;P0 P1;P2;P3) WF = 0400 ---------------- Blank After Transmit (cm) WN = 032 ----------------- Number of depth cells (1-255) WP = 00001 --------------- Pings per Ensemble (0-16384) WS = 0400 ---------------- Depth Cell Size (cm) WV = 550 ----------------- Mode 1 Ambiguity Vel (cm/s radial) WZ = 010 ----------------- Mode 5 Ambiguity Velocity (cm/s radial) >E? EA = +04500 -------------- Heading Alignment (1/100 deg) EB = +00000 -------------- Heading Bias (1/100 deg) ED = 00000 --------------- Transducer Depth (0 - 65535 dm) ES = 35 ------------------ Salinity (0-40 pp thousand) EX = 00000 --------------- Coord Transform (Xform:Type; Tilts; 3Bm; Map) EZ = 1011101 ------------- Sensor Source (C;D;H;P;R;S;T) >C? CB = 411 ----------------- Serial Port Control (Baud [4=9600]; Par; Stop) CC = 000 000 000 --------- Choose External Devices (x;x;x x;x;x x;x;SBMC) CF = 11110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec) CK ----------------------- Keep Parameters as USER Defaults CP = 0 ------------------- PolledMode (1=ON, 0=OFF; BREAK resets) CR # --------------------- Retrieve Parameters (0 = USER, 1 = FACTORY) CS ----------------------- Go (Start Pinging) CZ ----------------------- Power Down Instrument >T? TE = 00:00:00.00 --------- Time per Ensemble (hrs:min:sec.sec/100) TF = **/**/**,**:**:** --- Time of First Ping (yr/mon/day,hour:min:sec) TG = ****/**/**,**:**:** - Time of First Ping (CCYY/MM/DD,hh:mm:ss) TP = 00:00.80 ------------ Time per Ping (min:sec.sec/100) TS = 10/10/08,03:04:03 --- Time Set (yr/mon/day,hour:min:sec) TT = 2010/10/08,03:04:03 - Time Set (CCYY/MM/DD,hh:mm:ss) >PS0 Instrument S/N: 0 Frequency: 307200 HZ Configuration: 4 BEAM, JANUS Match Layer: 10 Beam Angle: 20 DEGREES Beam Pattern: CONVEX Orientation: DOWN Sensor(s): HEADING TILT 1 TILT 2 TEMPERATURE Temp Sens Offset: -0.28 degrees C CPU Firmware: 16.28 [0] Boot Code Ver: Required: 1.13 Actual: 1.13 DEMOD #1 Ver: ad48, Type: 1f DEMOD #2 Ver: ad48, Type: 1f PWRTIMG Ver: 85d3, Type: 7 Board Serial Number Data: 7A 00 00 00 86 80 62 09 PIO727-3000-00C B1 00 00 00 7E 69 3A 09 CPU727-2000-00J 1D 00 00 00 86 BE B5 09 DSP727-2001-04G 29 00 00 00 86 8D 8B 09 REC727-1000-04E >CF11110 > >CB611 > [BREAK Wakeup B] WorkHorse Broadband ADCP Version 16.28 RD Instruments (c) 1996-2005 All Rights Reserved. The fault log has been disabled. Use the FC command to clear the fault log. >TS? TS = 10/10/09,21:06:52 --- Time Set (yr/mon/day,hour:min:sec) > Powering Down [BREAK Wakeup B] WorkHorse Broadband ADCP Version 16.28 RD Instruments (c) 1996-2005 All Rights Reserved. The fault log has been disabled. Use the FC command to clear the fault log. >TS? TS = 10/10/14,17:27:34 --- Time Set (yr/mon/day,hour:min:sec) >TS10/10/14, 17:27:33 >CR1 [Parameters set to FACTORY defaults] >WD 111 000 000 >TE00:00:00.00 >CF11110 >EX00000 >EZ1011101 >EA04500 >WP1 >WN32 >WS400 >WF400 >BP0 >BX2000 >WB0 >WV550 >TP00:00.80 >B? BP = 000 ----------------- Pings per Ensemble >W? WD = 111 000 000 --------- Data Out (Vel;Cor;Amp PG;St;P0 P1;P2;P3) WF = 0400 ---------------- Blank After Transmit (cm) WN = 032 ----------------- Number of depth cells (1-255) WP = 00001 --------------- Pings per Ensemble (0-16384) WS = 0400 ---------------- Depth Cell Size (cm) WV = 550 ----------------- Mode 1 Ambiguity Vel (cm/s radial) WZ = 010 ----------------- Mode 5 Ambiguity Velocity (cm/s radial) >E? EA = +04500 -------------- Heading Alignment (1/100 deg) EB = +00000 -------------- Heading Bias (1/100 deg) ED = 00000 --------------- Transducer Depth (0 - 65535 dm) ES = 35 ------------------ Salinity (0-40 pp thousand) EX = 00000 --------------- Coord Transform (Xform:Type; Tilts; 3Bm; Map) EZ = 1011101 ------------- Sensor Source (C;D;H;P;R;S;T) >C? CB = 411 ----------------- Serial Port Control (Baud [4=9600]; Par; Stop) CC = 000 000 000 --------- Choose External Devices (x;x;x x;x;x x;x;SBMC) CF = 11110 --------------- Flow Ctrl (EnsCyc;PngCyc;Binry;Ser;Rec) CK ----------------------- Keep Parameters as USER Defaults CP = 0 ------------------- PolledMode (1=ON, 0=OFF; BREAK resets) CR # --------------------- Retrieve Parameters (0 = USER, 1 = FACTORY) CS ----------------------- Go (Start Pinging) CZ ----------------------- Power Down Instrument >T? TE = 00:00:00.00 --------- Time per Ensemble (hrs:min:sec.sec/100) TF = **/**/**,**:**:** --- Time of First Ping (yr/mon/day,hour:min:sec) TG = ****/**/**,**:**:** - Time of First Ping (CCYY/MM/DD,hh:mm:ss) TP = 00:00.80 ------------ Time per Ping (min:sec.sec/100) TS = 10/10/14,17:27:36 --- Time Set (yr/mon/day,hour:min:sec) TT = 2010/10/14,17:27:36 - Time Set (CCYY/MM/DD,hh:mm:ss) >PS0 Instrument S/N: 0 Frequency: 307200 HZ Configuration: 4 BEAM, JANUS Match Layer: 10 Beam Angle: 20 DEGREES Beam Pattern: CONVEX Orientation: DOWN Sensor(s): HEADING TILT 1 TILT 2 TEMPERATURE Temp Sens Offset: -0.28 degrees C CPU Firmware: 16.28 [0] Boot Code Ver: Required: 1.13 Actual: 1.13 DEMOD #1 Ver: ad48, Type: 1f DEMOD #2 Ver: ad48, Type: 1f PWRTIMG Ver: 85d3, Type: 7 Board Serial Number Data: 7A 00 00 00 86 80 62 09 PIO727-3000-00C B1 00 00 00 7E 69 3A 09 CPU727-2000-00J 1D 00 00 00 86 BE B5 09 DSP727-2001-04G 29 00 00 00 86 8D 8B 09 REC727-1000-04E >CF11110 > >CB611 > [BREAK Wakeup B] WorkHorse Broadband ADCP Version 16.28 RD Instruments (c) 1996-2005 All Rights Reserved. The fault log has been disabled. Use the FC command to clear the fault log. [BREAK Wakeup B] WorkHorse Broadband ADCP Version 16.28 RD Instruments (c) 1996-2005 All Rights Reserved. The fault log has been disabled. Use the FC command to clear the fault log. >TS? TS = 10/10/17,14:47:01 --- Time Set (yr/mon/day,hour:min:sec) >