* Sea-Bird SBE 9 Data File:
* FileName = C:\cruises\current\w1009b0101c.hex
* Software Version Seasave V 7.18c
* Temperature SN = 1008
* Conductivity SN = 1898
* Number of Bytes Per Scan = 30
* Number of Voltage Words = 4
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Sep 22 2010 15:18:57
** Ship: WECOMA
** Station Name: 01
** Station Number: 01
** Lat: 48 30.0063N
** Lon: 126 30.002 W
** Day: 265
** Time: 15:18
# nquan = 18
# nvalues = 9                           
# units = specified
# name 0 = t090C: Temperature [ITS-90, deg C]
# name 1 = c0S/m: Conductivity [S/m]
# name 2 = sal00: Salinity, Practical [PSU]
# name 3 = depSM: Depth [salt water, m], lat = 0.00
# name 4 = prDM: Pressure, Digiquartz [db]
# name 5 = t190C: Temperature, 2 [ITS-90, deg C]
# name 6 = c1S/m: Conductivity, 2 [S/m]
# name 7 = sal11: Salinity, Practical, 2 [PSU]
# name 8 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
# name 9 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/kg]
# name 10 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 11 = bat: Beam Attenuation, Chelsea/Seatech [1/m]
# name 12 = xmiss: Beam Transmission, Chelsea/Seatech [%]
# name 13 = altM: Altimeter [m]
# name 14 = par: PAR/Irradiance, Biospherical/Licor
# name 15 = pumps: Pump Status
# name 16 = nbin: number of scans per bin
# name 17 = flag: flag
# span 0 =    14.3320,    14.4394       
# span 1 =   3.824053,   3.885466       
# span 2 =    31.2501,    31.8496       
# span 3 =      1.898,      9.546       
# span 4 =      1.909,      9.599       
# span 5 =    14.3883,    14.4518       
# span 6 =   3.880648,   3.902558       
# span 7 =    31.7497,    31.9267       
# span 8 =     0.2486,     0.4609       
# span 9 =    234.291,    256.519       
# span 10 =     5.3679,     5.8780      
# span 11 =     0.4085,     0.4120      
# span 12 =    90.2128,    90.2925      
# span 13 =      78.11,      99.46      
# span 14 = 1.2599e+01, 4.9825e+01      
# span 15 =          1,          1      
# span 16 =          3,        396      
# span 17 = 0.0000e+00, 0.0000e+00      
# interval = decibars: 1                
# start_time = Sep 22 2010 15:18:57 [System UpLoad Time]
# bad_flag = -9.990e-29
# <Sensors count="13" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>1008</SerialNumber>
#       <CalibrationDate>09-Feb-10 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.80508004e-003</G>
#       <H>6.75982415e-004</H>
#       <I>2.77100061e-005</I>
#       <J>2.30973916e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>1898</SerialNumber>
#       <CalibrationDate>04-Nov-09 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.05830774e+001</G>
#         <H>1.51667596e+000</H>
#         <I>3.27379058e-004</I>
#         <J>5.53445723e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>2843</SerialNumber>
#       <CalibrationDate>10-Feb-10 </CalibrationDate>
#       <C1>-4.029368e+004</C1>
#       <C2>-8.161470e-001</C2>
#       <C3>1.260260e-002</C3>
#       <D1>3.076300e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.021227e+001</T1>
#       <T2>-4.808500e-004</T2>
#       <T3>3.981640e-006</T3>
#       <T4>3.194480e-009</T4>
#       <Slope>0.99991236</Slope>
#       <Offset>-1.07479</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.157000e-002</AD590M>
#       <AD590B>-8.237500e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>1364</SerialNumber>
#       <CalibrationDate>26-Jan-10 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.84864694e-003</G>
#       <H>6.78824752e-004</H>
#       <I>2.53740904e-005</I>
#       <J>1.88230546e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>1070</SerialNumber>
#       <CalibrationDate>03-Nov-09 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-4.10374419e+000</G>
#         <H>5.93412812e-001</H>
#         <I>-4.52629026e-005</I>
#         <J>3.50875964e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Fluorometer, WET Labs ECO-AFL/FL -->
#     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
#       <SerialNumber>FLRTD-425</SerialNumber>
#       <CalibrationDate>11 Mar 2008</CalibrationDate>
#       <ScaleFactor>1.20000000e+001</ScaleFactor>
#       <!-- Dark output -->
#       <Vblank>0.0720</Vblank>
#     </FluoroWetlabECO_AFL_FL_Sensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Free -->
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>0463</SerialNumber>
#       <CalibrationDate>08-May-10p</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>5.7240e-001</Soc>
#         <offset>-0.4887</offset>
#         <A>-2.4222e-003</A>
#         <B> 1.0971e-004</B>
#         <C>-2.1826e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92630e-004</D1>
#         <D2>-4.64800e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.7200</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Transmissometer, Chelsea/Seatech -->
#     <TransChelseaSeatechWetlabCStarSensor SensorID="59" >
#       <SerialNumber>CST-1031DR</SerialNumber>
#       <CalibrationDate>6 Jan 2007</CalibrationDate>
#       <M>18.6236</M>
#       <B>-1.0243</B>
#       <PathLength>0.250</PathLength>
#     </TransChelseaSeatechWetlabCStarSensor>
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>1021</SerialNumber>
#       <CalibrationDate>x</CalibrationDate>
#       <ScaleFactor>14.850</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, PAR/Irradiance, Biospherical/Licor -->
#     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
#       <SerialNumber>70135</SerialNumber>
#       <CalibrationDate>16-Feb-2010</CalibrationDate>
#       <M>1.00000000</M>
#       <B>0.00000000</B>
#       <CalibrationConstant>17100000000.00000000</CalibrationConstant>
#       <Multiplier>1.00000000</Multiplier>
#       <Offset>-0.05905000</Offset>
#     </PAR_BiosphericalLicorChelseaSensor>
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, pH -->
#     <pH_Sensor SensorID="43" >
#       <SerialNumber>0601</SerialNumber>
#       <CalibrationDate>17-jul-09</CalibrationDate>
#       <Slope>4.5394</Slope>
#       <Offset>2.5243</Offset>
#     </pH_Sensor>
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Free -->
#   </sensor>
# </Sensors>
# datcnv_date = Feb 13 2018 18:31:48, 7.23.2 [datcnv_vars = 16]
# datcnv_in = Z:\data\r2r\cruise\W1009B\fileset\103371\data\w1009b0101c.hex Z:\data\r2r\cruise\W1009B\fileset\103371\data\w1009b0101c.CON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# datcnv_ox_tau_correction = yes
# celltm_date = Feb 13 2018 18:31:52, 7.23.2
# celltm_in = Z:\data\local\cruise\W1009B\products\r2rctd\w1009b0101c.cnv
# celltm_alpha = 0.0300, 0.0300
# celltm_tau = 7.0000, 7.0000
# celltm_temp_sensor_use_for_cond = primary, secondary
# binavg_date = Feb 13 2018 18:31:54, 7.23.2
# binavg_in = Z:\data\local\cruise\W1009B\products\r2rctd\w1009b0101c.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
    14.3988   3.824053    31.2501      1.898      1.909    14.4155   3.880648    31.7497     0.2841    234.291     5.3679     0.4120    90.2128      99.46 4.9825e+01          1        396 0.0000e+00
    14.4260   3.848468    31.4499      2.966      2.983    14.4264   3.900103    31.9199     0.2486    256.519     5.8780     0.4109    90.2375      99.46 3.9756e+01          1         43 0.0000e+00
    14.4357   3.857680    31.5254      3.967      3.989    14.4257   3.900183    31.9210     0.2628    256.143     5.8697     0.4107    90.2432      99.46 3.1562e+01          1         42 0.0000e+00
    14.3885   3.866341    31.6437      4.931      4.959    14.3883   3.897360    31.9267     0.3228    256.203     5.8716     0.4093    90.2745      99.46 2.6151e+01          1         40 0.0000e+00
    14.3810   3.881285    31.7857      5.977      6.010    14.3947   3.897957    31.9262     0.2912    255.992     5.8674     0.4095    90.2704      99.46 2.1581e+01          1         44 0.0000e+00
    14.3320   3.883817    31.8496      6.966      7.005    14.3939   3.897610    31.9231     0.3180    256.001     5.8680     0.4085    90.2925      99.46 1.8302e+01          1         48 0.0000e+00
    14.4029   3.884459    31.7948      7.968      8.013    14.4346   3.901209    31.9210     0.3521    255.907     5.8655     0.4096    90.2673      80.91 1.5785e+01          1         47 0.0000e+00
    14.4394   3.885466    31.7730      8.913      8.962    14.4494   3.902558    31.9207     0.4609    256.168     5.8714     0.4102    90.2550      78.11 1.3619e+01          1         42 0.0000e+00
    14.4381   3.885294    31.7724      9.546      9.599    14.4518   3.902412    31.9172     0.3277    256.035     5.8683     0.4100    90.2594      99.46 1.2599e+01          1          3 0.0000e+00