* Sea-Bird SBE 9 Data File:
* FileName = C:\cruises\current\w1009b0101b.hex
* Software Version Seasave V 7.18c
* Temperature SN = 1008
* Conductivity SN = 1898
* Number of Bytes Per Scan = 30
* Number of Voltage Words = 4
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Sep 22 2010 15:16:28
** Ship: WECOMA
** Station Name: 01
** Station Number: 01
** Lat: 48 30.0063N
** Lon: 126 30.002 W
** Day: 265
** Time: 15:16
# nquan = 18
# nvalues = 12                          
# units = specified
# name 0 = t090C: Temperature [ITS-90, deg C]
# name 1 = c0S/m: Conductivity [S/m]
# name 2 = sal00: Salinity, Practical [PSU]
# name 3 = depSM: Depth [salt water, m], lat = 0.00
# name 4 = prDM: Pressure, Digiquartz [db]
# name 5 = t190C: Temperature, 2 [ITS-90, deg C]
# name 6 = c1S/m: Conductivity, 2 [S/m]
# name 7 = sal11: Salinity, Practical, 2 [PSU]
# name 8 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
# name 9 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/kg]
# name 10 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 11 = bat: Beam Attenuation, Chelsea/Seatech [1/m]
# name 12 = xmiss: Beam Transmission, Chelsea/Seatech [%]
# name 13 = altM: Altimeter [m]
# name 14 = par: PAR/Irradiance, Biospherical/Licor
# name 15 = pumps: Pump Status
# name 16 = nbin: number of scans per bin
# name 17 = flag: flag
# span 0 =    14.0055,    14.4301       
# span 1 =   3.827780,   3.894638       
# span 2 =    31.2811,    32.2274       
# span 3 =      1.850,     12.728       
# span 4 =      1.861,     12.799       
# span 5 =    13.8832,    14.4409       
# span 6 =   3.869180,   3.901190       
# span 7 =    31.9100,    32.0972       
# span 8 =     0.2409,     0.3224       
# span 9 =    197.339,    254.246       
# span 10 =     4.5214,     5.8269      
# span 11 =     0.4026,     0.4118      
# span 12 =    90.2190,    90.4255      
# span 13 =      66.63,      99.46      
# span 14 = 8.6044e+00, 4.8115e+01      
# span 15 =          1,          1      
# span 16 =         22,        444      
# span 17 = 0.0000e+00, 0.0000e+00      
# interval = decibars: 1                
# start_time = Sep 22 2010 15:16:28 [System UpLoad Time]
# bad_flag = -9.990e-29
# <Sensors count="13" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>1008</SerialNumber>
#       <CalibrationDate>09-Feb-10 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.80508004e-003</G>
#       <H>6.75982415e-004</H>
#       <I>2.77100061e-005</I>
#       <J>2.30973916e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>1898</SerialNumber>
#       <CalibrationDate>04-Nov-09 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.05830774e+001</G>
#         <H>1.51667596e+000</H>
#         <I>3.27379058e-004</I>
#         <J>5.53445723e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>2843</SerialNumber>
#       <CalibrationDate>10-Feb-10 </CalibrationDate>
#       <C1>-4.029368e+004</C1>
#       <C2>-8.161470e-001</C2>
#       <C3>1.260260e-002</C3>
#       <D1>3.076300e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.021227e+001</T1>
#       <T2>-4.808500e-004</T2>
#       <T3>3.981640e-006</T3>
#       <T4>3.194480e-009</T4>
#       <Slope>0.99991236</Slope>
#       <Offset>-1.07479</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.157000e-002</AD590M>
#       <AD590B>-8.237500e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>1364</SerialNumber>
#       <CalibrationDate>26-Jan-10 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.84864694e-003</G>
#       <H>6.78824752e-004</H>
#       <I>2.53740904e-005</I>
#       <J>1.88230546e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>1070</SerialNumber>
#       <CalibrationDate>03-Nov-09 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-4.10374419e+000</G>
#         <H>5.93412812e-001</H>
#         <I>-4.52629026e-005</I>
#         <J>3.50875964e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Fluorometer, WET Labs ECO-AFL/FL -->
#     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
#       <SerialNumber>FLRTD-425</SerialNumber>
#       <CalibrationDate>11 Mar 2008</CalibrationDate>
#       <ScaleFactor>1.20000000e+001</ScaleFactor>
#       <!-- Dark output -->
#       <Vblank>0.0720</Vblank>
#     </FluoroWetlabECO_AFL_FL_Sensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Free -->
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>0463</SerialNumber>
#       <CalibrationDate>08-May-10p</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>5.7240e-001</Soc>
#         <offset>-0.4887</offset>
#         <A>-2.4222e-003</A>
#         <B> 1.0971e-004</B>
#         <C>-2.1826e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92630e-004</D1>
#         <D2>-4.64800e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.7200</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Transmissometer, Chelsea/Seatech -->
#     <TransChelseaSeatechWetlabCStarSensor SensorID="59" >
#       <SerialNumber>CST-1031DR</SerialNumber>
#       <CalibrationDate>6 Jan 2007</CalibrationDate>
#       <M>18.6236</M>
#       <B>-1.0243</B>
#       <PathLength>0.250</PathLength>
#     </TransChelseaSeatechWetlabCStarSensor>
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>1021</SerialNumber>
#       <CalibrationDate>x</CalibrationDate>
#       <ScaleFactor>14.850</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, PAR/Irradiance, Biospherical/Licor -->
#     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
#       <SerialNumber>70135</SerialNumber>
#       <CalibrationDate>16-Feb-2010</CalibrationDate>
#       <M>1.00000000</M>
#       <B>0.00000000</B>
#       <CalibrationConstant>17100000000.00000000</CalibrationConstant>
#       <Multiplier>1.00000000</Multiplier>
#       <Offset>-0.05905000</Offset>
#     </PAR_BiosphericalLicorChelseaSensor>
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, pH -->
#     <pH_Sensor SensorID="43" >
#       <SerialNumber>0601</SerialNumber>
#       <CalibrationDate>17-jul-09</CalibrationDate>
#       <Slope>4.5394</Slope>
#       <Offset>2.5243</Offset>
#     </pH_Sensor>
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Free -->
#   </sensor>
# </Sensors>
# datcnv_date = Feb 13 2018 18:21:40, 7.23.2 [datcnv_vars = 16]
# datcnv_in = Z:\data\r2r\cruise\W1009B\fileset\103371\data\w1009b0101b.hex Z:\data\r2r\cruise\W1009B\fileset\103371\data\w1009b0101b.CON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# datcnv_ox_tau_correction = yes
# celltm_date = Feb 13 2018 18:21:45, 7.23.2
# celltm_in = Z:\data\local\cruise\W1009B\products\r2rctd\w1009b0101b.cnv
# celltm_alpha = 0.0300, 0.0300
# celltm_tau = 7.0000, 7.0000
# celltm_temp_sensor_use_for_cond = primary, secondary
# binavg_date = Feb 13 2018 18:21:47, 7.23.2
# binavg_in = Z:\data\local\cruise\W1009B\products\r2rctd\w1009b0101b.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
    14.4029   3.827780    31.2811      1.850      1.861    14.4234   3.898659    31.9100     0.2617    197.339     4.5214     0.4097    90.2641      99.46 4.8115e+01          1        444 0.0000e+00
    14.4137   3.846219    31.4396      2.846      2.862    14.4201   3.899641    31.9215     0.2526    231.942     5.3148     0.4118    90.2190      99.46 3.9435e+01          1         77 0.0000e+00
    14.4182   3.870464    31.6563      3.956      3.978    14.4267   3.900347    31.9219     0.2872    252.709     5.7916     0.4110    90.2360      99.46 3.1597e+01          1         49 0.0000e+00
    14.4202   3.872036    31.6687      4.960      4.988    14.4291   3.900451    31.9205     0.3157    254.246     5.8269     0.4093    90.2740      98.78 2.5872e+01          1         41 0.0000e+00
    14.4301   3.881488    31.7461      5.973      6.007    14.4409   3.901190    31.9169     0.3120    253.726     5.8153     0.4103    90.2518      66.63 2.1607e+01          1         31 0.0000e+00
    14.4223   3.881527    31.7528      7.060      7.099    14.4267   3.900448    31.9218     0.2913    252.428     5.7856     0.4111    90.2341      95.86 1.8225e+01          1         59 0.0000e+00
    14.4222   3.875231    31.6952      7.859      7.903    14.4313   3.900708    31.9200     0.2584    250.595     5.7433     0.4114    90.2276      90.85 1.6445e+01          1         63 0.0000e+00
    14.4285   3.889350    31.8182      8.941      8.991    14.4330   3.900898    31.9199     0.2766    249.733     5.7241     0.4110    90.2369      99.46 1.3770e+01          1         32 0.0000e+00
    14.4273   3.890812    31.8322      9.956     10.011    14.4307   3.900743    31.9200     0.3224    249.143     5.7106     0.4113    90.2291      99.46 1.1710e+01          1         37 0.0000e+00
    14.4293   3.891809    31.8392     10.945     11.005    14.4315   3.900904    31.9205     0.2832    249.707     5.7236     0.4116    90.2215      99.46 1.0069e+01          1         51 0.0000e+00
    14.4178   3.894093    31.8694     11.953     12.019    14.4023   3.899637    31.9333     0.2543    249.291     5.7142     0.4106    90.2438      99.46 9.2498e+00          1         71 0.0000e+00
    14.0055   3.894638    32.2274     12.728     12.799    13.8832   3.869180    32.0972     0.2409    251.521     5.7673     0.4026    90.4255      99.46 8.6044e+00          1         22 0.0000e+00