* Sea-Bird SBE 9 Data File:
* FileName = C:\Vents2009-Brothers\data\T09A01.dat
* Software Version Seasave Win32 V 5.39
* Temperature SN = 4129
* Conductivity SN = 2577
* Number of Bytes Per Scan = 34
* Number of Voltage Words = 4
* Number of Scans Averaged by the Deck Unit = 24
* Append System Time to Every Scan
* System UpLoad Time = Mar 06 2009 01:36:09
* NMEA Latitude = 34 53.69 S
* NMEA Longitude = 179 04.39 E
* NMEA UTC (Time) = 01:36:03
* Store Lat/Lon Data = Add to Header Only
** Cruise: VENTS-2008  NE Lau
** R/V Thompson
** Cast#: 005
** Station Name: T09A-01
** Latitude: 34 53.6985'S
** Longitude: 179 04.4'E
# nquan = 11
# nvalues = 15                          
# units = specified
# name 0 = latitude: Latitude [deg]
# name 1 = longitude: Longitude [deg]
# name 2 = t090C: Temperature [ITS-90, deg C]
# name 3 = c0S/m: Conductivity [S/m]
# name 4 = sal00: Salinity, Practical [PSU]
# name 5 = depSM: Depth [salt water, m]
# name 6 = prDM: Pressure, Digiquartz [db]
# name 7 = altM: Altimeter [m]
# name 8 = pumps: Pump Status
# name 9 = nbin: number of scans per bin
# name 10 = flag: flag
# span 0 =  -34.89483,  -34.89483       
# span 1 =  179.07317,  179.07317       
# span 2 =    -3.2210,    21.7019       
# span 3 =   1.950143,   5.042344       
# span 4 =    24.8084,    43.7423       
# span 5 =      2.409,   2629.785       
# span 6 =      2.426,   2665.685       
# span 7 =      54.85,     100.13       
# span 8 =          0,          1       
# span 9 =          1,         44       
# span 10 = 0.0000e+00, 0.0000e+00      
# interval = decibars: 1                
# start_time = Mar 06 2009 01:36:09 [System UTC, first data scan.]
# bad_flag = -9.990e-29
# <Sensors count="13" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4129</SerialNumber>
#       <CalibrationDate>07-Dec-2007</CalibrationDate>
#       <UseG_J>0</UseG_J>
#       <A>3.68121272e-003</A>
#       <B>6.02708524e-004</B>
#       <C>1.65040397e-005</C>
#       <D>2.09309082e-006</D>
#       <F0_Old>3210.325</F0_Old>
#       <G>4.40975335e-003</G>
#       <H>6.49533520e-004</H>
#       <I>2.37948469e-005</I>
#       <J>2.09152947e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>2577</SerialNumber>
#       <CalibrationDate>06-Dec-2007</CalibrationDate>
#       <UseG_J>0</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>2.47796888e-006</A>
#         <B>1.57951873e+000</B>
#         <C>-1.01591666e+001</C>
#         <D>-9.69437055e-005</D>
#         <M>5.6</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.01686362e+001</G>
#         <H>1.58455075e+000</H>
#         <I>-1.99976478e-003</I>
#         <J>2.45312942e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0652</SerialNumber>
#       <CalibrationDate>15-Jan-2008</CalibrationDate>
#       <C1>-4.189902e+004</C1>
#       <C2>-9.742150e-001</C2>
#       <C3>1.171710e-002</C3>
#       <D1>3.312700e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.030600e+001</T1>
#       <T2>-5.682360e-004</T2>
#       <T3>3.621260e-006</T3>
#       <T4>2.893160e-009</T4>
#       <Slope>0.99993000</Slope>
#       <Offset>-1.34810</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.271860e-002</AD590M>
#       <AD590B>-9.423450e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Free -->
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Free -->
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Turbidity Meter, Seapoint -->
#     <OBS_SeapointTurbiditySensor SensorID="33" >
#       <SerialNumber>11542</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <!-- The following is an array index, not the actual gain setting. -->
#       <GainSetting>0</GainSetting>
#       <ScaleFactor>1.000</ScaleFactor>
#     </OBS_SeapointTurbiditySensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, User Polynomial -->
#     <UserPolynomialSensor SensorID="61" >
#       <SerialNumber>ORP4CTD-05</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <SensorName></SensorName>
#       <A0>-500.00000000</A0>
#       <A1>200.00000000</A1>
#       <A2>0.00000000</A2>
#       <A3>0.00000000</A3>
#     </UserPolynomialSensor>
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>174</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>14.980</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Turbidity Meter, Seapoint, 2 -->
#     <OBS_SeapointTurbiditySensor SensorID="33" >
#       <SerialNumber>1792</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <!-- The following is an array index, not the actual gain setting. -->
#       <GainSetting>0</GainSetting>
#       <ScaleFactor>1.000</ScaleFactor>
#     </OBS_SeapointTurbiditySensor>
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, User Polynomial, 2 -->
#     <UserPolynomialSensor SensorID="61" >
#       <SerialNumber>ORP4CTD-01</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <SensorName></SensorName>
#       <A0>-500.00000000</A0>
#       <A1>200.00000000</A1>
#       <A2>0.00000000</A2>
#       <A3>0.00000000</A3>
#     </UserPolynomialSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, OBS, Seatech LS6000/WET Labs LBSS -->
#     <SeatechLS6000WetlabsLBSS_Sensor SensorID="34" >
#       <SerialNumber>LSS-356</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <!-- The following is an array index, not the actual gain setting. -->
#       <GainSetting>7</GainSetting>
#       <Offset>0.000</Offset>
#       <Slope>1.000</Slope>
#     </SeatechLS6000WetlabsLBSS_Sensor>
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Methane Conc., Franatech METS -->
#     <MethaneConcCAPSUM_Sensor SensorID="24" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <A0>0.00000000</A0>
#       <A1>0.00000000</A1>
#       <B0>0.00000000</B0>
#       <B1>0.00000000</B1>
#       <B2>0.00000000</B2>
#       <D>0.00000000</D>
#     </MethaneConcCAPSUM_Sensor>
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Methane Gas Temp., Franatech METS -->
#     <MethaneTempCAPSUM_Sensor SensorID="25" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <T1>0.00000000</T1>
#       <T2>0.00000000</T2>
#     </MethaneTempCAPSUM_Sensor>
#   </sensor>
# </Sensors>
# datcnv_date = Feb 18 2018 21:35:02, 7.23.2 [datcnv_vars = 9]
# datcnv_in = Z:\data\r2r\cruise\TN230\fileset\102309\data\t09a01.dat Z:\data\r2r\cruise\TN230\fileset\102309\data\t09a01.CON
# datcnv_skipover = 0
# celltm_date = Feb 18 2018 21:35:06, 7.23.2
# celltm_in = Z:\data\local\cruise\TN230\products\r2rctd\t09a01.cnv
# celltm_alpha = 0.0300, 0.0000
# celltm_tau = 7.0000, 0.0000
# celltm_temp_sensor_use_for_cond = primary, 
# binavg_date = Feb 18 2018 21:35:09, 7.23.2
# binavg_in = Z:\data\local\cruise\TN230\products\r2rctd\t09a01.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
  -34.89483  179.07317    21.6404   5.039062    35.6288     12.731     12.824     100.13          1          3 0.0000e+00
  -34.89483  179.07317     3.2134   2.632525    28.6217    618.971    624.407      70.94          0          1 0.0000e+00
  -34.89483  179.07317    -3.2210   1.950143    24.8084   2629.785   2665.685      54.85          0          1 0.0000e+00
  -34.89483  179.07317    13.3647   5.031935    43.7423     12.542     12.634     100.13          0          1 0.0000e+00
  -34.89483  179.07317    21.6382   5.040660    35.6302     12.035     12.123     100.13          0         44 0.0000e+00
  -34.89483  179.07317    21.6501   5.039631    35.6258     11.312     11.395     100.13          1          6 0.0000e+00
  -34.89483  179.07317    21.7003   5.042344    35.6058     10.065     10.139     100.13          1          1 0.0000e+00
  -34.89483  179.07317    21.7001   5.042128    35.6047      8.878      8.944     100.13          1          2 0.0000e+00
  -34.89483  179.07317    21.6995   5.042188    35.6061      7.957      8.015     100.13          1          1 0.0000e+00
  -34.89483  179.07317    21.6995   5.042160    35.6062      7.182      7.235     100.13          1          1 0.0000e+00
  -34.89483  179.07317    21.7015   5.042307    35.6061      6.040      6.084     100.13          1          2 0.0000e+00
  -34.89483  179.07317    21.7019   5.042337    35.6066      4.894      4.930     100.13          1          7 0.0000e+00
  -34.89483  179.07317    21.6963   5.041800    35.6073      4.356      4.388     100.13          1          4 0.0000e+00
  -34.89483  179.07317    21.6947   5.041580    35.6072      3.445      3.470     100.13          1          1 0.0000e+00
  -34.89483  179.07317    21.6961   5.041519    35.6059      2.409      2.426     100.13          1          2 0.0000e+00