* Sea-Bird SBE 9 Data File:
* FileName = C:\Data\ctd\19902090a.hex
* Software Version Seasave V 7.18d
* Temperature SN = 4502
* Conductivity SN = 3089
* Number of Bytes Per Scan = 40
* Number of Voltage Words = 5
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Sep 18 2010 16:22:13
* NMEA Latitude = 68 55.54 N
* NMEA Longitude = 053 15.36 W
* NMEA UTC (Time) = Sep 18 2010 16:22:09
* Store Lat/Lon Data = Append to Every Scan
** R/V Knorr
** Station: DKOT-13a
** forgot to fire surface bottles
# nquan = 20
# nvalues = 1                           
# units = specified
# name 0 = latitude: Latitude [deg]
# name 1 = longitude: Longitude [deg]
# name 2 = t090C: Temperature [ITS-90, deg C]
# name 3 = c0S/m: Conductivity [S/m]
# name 4 = sal00: Salinity, Practical [PSU]
# name 5 = depSM: Depth [salt water, m]
# name 6 = prDM: Pressure, Digiquartz [db]
# name 7 = t190C: Temperature, 2 [ITS-90, deg C]
# name 8 = c1S/m: Conductivity, 2 [S/m]
# name 9 = sal11: Salinity, Practical, 2 [PSU]
# name 10 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
# name 11 = bat: Beam Attenuation, Chelsea/Seatech [1/m]
# name 12 = xmiss: Beam Transmission, Chelsea/Seatech [%]
# name 13 = altM: Altimeter [m]
# name 14 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/kg]
# name 15 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 16 = spar: SPAR/Surface Irradiance
# name 17 = pumps: Pump Status
# name 18 = nbin: number of scans per bin
# name 19 = flag: flag
# span 0 =   68.92566,   68.92566       
# span 1 =  -53.25580,  -53.25580       
# span 2 =     4.8663,     4.8663       
# span 3 =   3.041613,   3.041613       
# span 4 =    31.6212,    31.6212       
# span 5 =      2.743,      2.743       
# span 6 =      2.770,      2.770       
# span 7 =     4.8675,     4.8675       
# span 8 =   3.041231,   3.041231       
# span 9 =    31.6156,    31.6156       
# span 10 =     0.6927,     0.6927      
# span 11 =     0.4669,     0.4669      
# span 12 =    88.9828,    88.9828      
# span 13 =      99.54,      99.54      
# span 14 =    306.672,    306.672      
# span 15 =     7.0386,     7.0386      
# span 16 = 3.2016e+00, 3.2016e+00      
# span 17 =          1,          1      
# span 18 =       1723,       1723      
# span 19 = 0.0000e+00, 0.0000e+00      
# interval = decibars: 1                
# start_time = Sep 18 2010 16:22:09 [NMEA time, header]
# bad_flag = -9.990e-29
# <Sensors count="15" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4502</SerialNumber>
#       <CalibrationDate>24-Mar-10</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.40306144e-003</G>
#       <H>6.37870313e-004</H>
#       <I>2.14455770e-005</I>
#       <J>1.86900680e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>3089</SerialNumber>
#       <CalibrationDate>16-Mar-10</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.03706076e+001</G>
#         <H>1.39605833e+000</H>
#         <I>-4.85108095e-004</I>
#         <J>9.87809959e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>94763_SBE09785_vert_orientation</SerialNumber>
#       <CalibrationDate>2008-08-08</CalibrationDate>
#       <C1>-4.617992e+004</C1>
#       <C2>-7.341121e-001</C2>
#       <C3>1.340470e-002</C3>
#       <D1>3.758800e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.017251e+001</T1>
#       <T2>-4.619284e-004</T2>
#       <T3>4.108730e-006</T3>
#       <T4>5.343720e-010</T4>
#       <Slope>1.00000000</Slope>
#       <Offset>0.30000</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.278360e-002</AD590M>
#       <AD590B>-8.936226e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4507</SerialNumber>
#       <CalibrationDate>12-Mar-10</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.40112019e-003</G>
#       <H>6.40267631e-004</H>
#       <I>2.13433496e-005</I>
#       <J>1.81364748e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>3042</SerialNumber>
#       <CalibrationDate>24-Mar-10</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.06458741e+001</G>
#         <H>1.44911523e+000</H>
#         <I>4.42205697e-004</I>
#         <J>3.96669879e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Fluorometer, WET Labs ECO-AFL/FL -->
#     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
#       <SerialNumber>FLNTURTD-304</SerialNumber>
#       <CalibrationDate>10-MAR-2008</CalibrationDate>
#       <ScaleFactor>1.00000000e+001</ScaleFactor>
#       <!-- Dark output -->
#       <Vblank>0.0710</Vblank>
#     </FluoroWetlabECO_AFL_FL_Sensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, User Polynomial -->
#     <UserPolynomialSensor SensorID="61" >
#       <SerialNumber>FLNTURTD-304</SerialNumber>
#       <CalibrationDate>10-MAR-2008</CalibrationDate>
#       <SensorName>FLNTU turbidity</SensorName>
#       <A0>-0.24000000</A0>
#       <A1>5.00000000</A1>
#       <A2>0.00000000</A2>
#       <A3>0.00000000</A3>
#     </UserPolynomialSensor>
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Transmissometer, Chelsea/Seatech -->
#     <TransChelseaSeatechWetlabCStarSensor SensorID="59" >
#       <SerialNumber>CST-1117</SerialNumber>
#       <CalibrationDate>2008-04-30</CalibrationDate>
#       <M>20.4470</M>
#       <B>-1.1450</B>
#       <PathLength>0.250</PathLength>
#     </TransChelseaSeatechWetlabCStarSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>997</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>14.850</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>1642</SerialNumber>
#       <CalibrationDate>2009-6-12</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>4.8970e-001</Soc>
#         <offset>-0.4898</offset>
#         <A>-2.1282e-003</A>
#         <B> 1.8127e-004</B>
#         <C>-3.4053e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92630e-004</D1>
#         <D2>-4.64800e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.7900</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Free -->
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Free -->
#   </sensor>
#   <sensor Channel="14" >
#     <!-- SPAR voltage, Unavailable -->
#   </sensor>
#   <sensor Channel="15" >
#     <!-- SPAR voltage, SPAR/Surface Irradiance -->
#     <SPAR_Sensor SensorID="51" >
#       <SerialNumber>6294</SerialNumber>
#       <CalibrationDate>3/13/2008</CalibrationDate>
#       <ConversionFactor>1826.90000000</ConversionFactor>
#       <RatioMultiplier>1.00000000</RatioMultiplier>
#     </SPAR_Sensor>
#   </sensor>
# </Sensors>
# datcnv_date = Feb 11 2018 23:49:19, 7.23.2 [datcnv_vars = 18]
# datcnv_in = Z:\data\r2r\cruise\KN199-02\fileset\102285\data\19902090a.hex Z:\data\r2r\cruise\KN199-02\fileset\102285\data\19902090a.CON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# datcnv_ox_tau_correction = yes
# celltm_date = Feb 11 2018 23:49:28, 7.23.2
# celltm_in = Z:\data\local\cruise\KN199-02\products\r2rctd\19902090a.cnv
# celltm_alpha = 0.0300, 0.0300
# celltm_tau = 7.0000, 7.0000
# celltm_temp_sensor_use_for_cond = primary, secondary
# binavg_date = Feb 11 2018 23:49:31, 7.23.2
# binavg_in = Z:\data\local\cruise\KN199-02\products\r2rctd\19902090a.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
   68.92566  -53.25580     4.8663   3.041613    31.6212      2.743      2.770     4.8675   3.041231    31.6156     0.6927     0.4669    88.9828      99.54    306.672     7.0386 3.2016e+00          1       1723 0.0000e+00