* Sea-Bird SBE 9 Data File:
* FileName = C:\Data\ctd\19510070.hex
* Software Version Seasave V 7.18d
* Temperature SN = 4039
* Conductivity SN = 2186
* Number of Bytes Per Scan = 40
* Number of Voltage Words = 5
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Jun 24 2009 22:58:13
* NMEA Latitude = 56 17.50 N
* NMEA Longitude = 169 52.69 W
* NMEA UTC (Time) = Jun 24 2009 22:58:11
* Store Lat/Lon Data = Append to Every Scan
** R/V Knorr
** Station: ctd070
# nquan = 21
# nvalues = 4                           
# units = specified
# name 0 = latitude: Latitude [deg]
# name 1 = longitude: Longitude [deg]
# name 2 = t090C: Temperature [ITS-90, deg C]
# name 3 = c0S/m: Conductivity [S/m]
# name 4 = sal00: Salinity, Practical [PSU]
# name 5 = depSM: Depth [salt water, m]
# name 6 = prDM: Pressure, Digiquartz [db]
# name 7 = t190C: Temperature, 2 [ITS-90, deg C]
# name 8 = c1S/m: Conductivity, 2 [S/m]
# name 9 = sal11: Salinity, Practical, 2 [PSU]
# name 10 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
# name 11 = bat: Beam Attenuation, Chelsea/Seatech [1/m]
# name 12 = xmiss: Beam Transmission, Chelsea/Seatech [%]
# name 13 = par: PAR/Irradiance, Biospherical/Licor
# name 14 = altM: Altimeter [m]
# name 15 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/kg]
# name 16 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 17 = spar: SPAR/Surface Irradiance
# name 18 = pumps: Pump Status
# name 19 = nbin: number of scans per bin
# name 20 = flag: flag
# span 0 =   56.29164,   56.29168       
# span 1 = -169.87864, -169.87827       
# span 2 =     5.8539,     6.1859       
# span 3 =   3.159697,   3.186100       
# span 4 =    32.0030,    32.0234       
# span 5 =      5.282,      7.635       
# span 6 =      5.330,      7.706       
# span 7 =     5.8495,     6.1821       
# span 8 =   3.159647,   3.185834       
# span 9 =    32.0037,    32.0272       
# span 10 =     0.6324,     0.9576      
# span 11 =     0.5117,     0.5192      
# span 12 =    87.8294,    87.9941      
# span 13 = 2.3288e+02, 3.7826e+02      
# span 14 =      99.33,      99.97      
# span 15 =    316.800,    318.880      
# span 16 =     7.2721,     7.3202      
# span 17 = 1.5592e+03, 1.5680e+03      
# span 18 =          1,          1      
# span 19 =        170,       1470      
# span 20 = 0.0000e+00, 0.0000e+00      
# interval = decibars: 1                
# start_time = Jun 24 2009 22:58:11 [NMEA time, header]
# bad_flag = -9.990e-29
# <Sensors count="15" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4039</SerialNumber>
#       <CalibrationDate>2008-03-11</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.41244996e-003</G>
#       <H>6.48984631e-004</H>
#       <I>2.35635703e-005</I>
#       <J>2.11338748e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>2186</SerialNumber>
#       <CalibrationDate>2008-03-12</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.09603115e+001</G>
#         <H>1.45940924e+000</H>
#         <I>-2.58343879e-003</I>
#         <J>2.37966997e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>94763_SBE09785_vert_orientation</SerialNumber>
#       <CalibrationDate>2008-08-08</CalibrationDate>
#       <C1>-4.617992e+004</C1>
#       <C2>-7.341121e-001</C2>
#       <C3>1.340470e-002</C3>
#       <D1>3.758800e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.017251e+001</T1>
#       <T2>-4.619284e-004</T2>
#       <T3>4.108730e-006</T3>
#       <T4>5.343720e-010</T4>
#       <Slope>1.00000000</Slope>
#       <Offset>0.30000</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.278360e-002</AD590M>
#       <AD590B>-8.936226e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4195</SerialNumber>
#       <CalibrationDate>2008-03-12</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.37106938e-003</G>
#       <H>6.43604709e-004</H>
#       <I>2.22037049e-005</I>
#       <J>1.81324672e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>2670</SerialNumber>
#       <CalibrationDate>2008-03-12</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.04269951e+001</G>
#         <H>1.39565891e+000</H>
#         <I>-4.94150126e-004</I>
#         <J>1.09080841e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Fluorometer, WET Labs ECO-AFL/FL -->
#     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
#       <SerialNumber>FLNTURTD-304</SerialNumber>
#       <CalibrationDate>10-MAR-2008</CalibrationDate>
#       <ScaleFactor>1.00000000e+001</ScaleFactor>
#       <!-- Dark output -->
#       <Vblank>0.0710</Vblank>
#     </FluoroWetlabECO_AFL_FL_Sensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, User Polynomial -->
#     <UserPolynomialSensor SensorID="61" >
#       <SerialNumber>FLNTURTD-304</SerialNumber>
#       <CalibrationDate>10-MAR-2008</CalibrationDate>
#       <SensorName>FLNTU turbidity</SensorName>
#       <A0>-0.24000000</A0>
#       <A1>5.00000000</A1>
#       <A2>0.00000000</A2>
#       <A3>0.00000000</A3>
#     </UserPolynomialSensor>
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Transmissometer, Chelsea/Seatech -->
#     <TransChelseaSeatechWetlabCStarSensor SensorID="59" >
#       <SerialNumber>CST-1116</SerialNumber>
#       <CalibrationDate>2008-04-23</CalibrationDate>
#       <M>21.3800</M>
#       <B>-1.3260</B>
#       <PathLength>0.250</PathLength>
#     </TransChelseaSeatechWetlabCStarSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, PAR/Irradiance, Biospherical/Licor -->
#     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
#       <SerialNumber>QSP-200L 4550</SerialNumber>
#       <CalibrationDate>2008-03-13</CalibrationDate>
#       <M>1.00000000</M>
#       <B>0.00000000</B>
#       <CalibrationConstant>7751937984.49612427</CalibrationConstant>
#       <Multiplier>1.00000000</Multiplier>
#       <Offset>-0.18949149</Offset>
#     </PAR_BiosphericalLicorChelseaSensor>
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>997</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>14.850</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>0723</SerialNumber>
#       <CalibrationDate>2008-03-13</CalibrationDate>
#       <Use2007Equation>0</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>4.8450e-001</Soc>
#         <offset>-0.5121</offset>
#         <Pcor>1.35e-004</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>0.0000e+000</Soc>
#         <offset> 0.0000</offset>
#         <A> 0.0000e+000</A>
#         <B> 0.0000e+000</B>
#         <C> 0.0000e+000</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 0.00000e+000</D1>
#         <D2> 0.00000e+000</D2>
#         <E> 0.0000e+000</E>
#         <Tau20> 0.0000</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Free -->
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Free -->
#   </sensor>
#   <sensor Channel="14" >
#     <!-- SPAR voltage, Unavailable -->
#   </sensor>
#   <sensor Channel="15" >
#     <!-- SPAR voltage, SPAR/Surface Irradiance -->
#     <SPAR_Sensor SensorID="51" >
#       <SerialNumber>QSR-240 6294</SerialNumber>
#       <CalibrationDate>2008-03-13</CalibrationDate>
#       <ConversionFactor>1826.89912827</ConversionFactor>
#       <RatioMultiplier>1.00000000</RatioMultiplier>
#     </SPAR_Sensor>
#   </sensor>
# </Sensors>
# datcnv_date = Feb 18 2018 11:19:57, 7.23.2 [datcnv_vars = 19]
# datcnv_in = Z:\data\r2r\cruise\KN195-10\fileset\101551\data\19510070.hex Z:\data\r2r\cruise\KN195-10\fileset\101551\data\19510070.CON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# datcnv_ox_tau_correction = yes
# celltm_date = Feb 18 2018 11:20:01, 7.23.2
# celltm_in = Z:\data\local\cruise\KN195-10\products\r2rctd\19510070.cnv
# celltm_alpha = 0.0300, 0.0300
# celltm_tau = 7.0000, 7.0000
# celltm_temp_sensor_use_for_cond = primary, secondary
# binavg_date = Feb 18 2018 11:20:03, 7.23.2
# binavg_in = Z:\data\local\cruise\KN195-10\products\r2rctd\19510070.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
   56.29168 -169.87827     5.8862   3.162328    32.0183      7.635      7.706     5.8992   3.163504    32.0186     0.9576     0.5158    87.9030 2.3288e+02      99.97    318.880     7.3202 1.5664e+03          1        607 0.0000e+00
   56.29166 -169.87833     5.8539   3.159697    32.0234      6.935      6.999     5.8495   3.159647    32.0272     0.9247     0.5117    87.9941 2.6836e+02      99.97    318.762     7.3175 1.5673e+03          1        170 0.0000e+00
   56.29166 -169.87842     6.0553   3.175489    32.0064      6.241      6.298     6.0534   3.175335    32.0064     0.8753     0.5182    87.8517 3.1199e+02      99.97    318.173     7.3037 1.5680e+03          1        661 0.0000e+00
   56.29164 -169.87864     6.1859   3.186100    32.0030      5.282      5.330     6.1821   3.185834    32.0037     0.6324     0.5192    87.8294 3.7826e+02      99.33    316.800     7.2721 1.5592e+03          1       1470 0.0000e+00