2011-10-18 11:24:58,048 DEBUG root about to write control file parameters to --yearbase 2011 --cruisename EN500 --configtype python --sonar wh300 --dbname a_en --datatype uhdas --cfgpath /home/data/EN500/proc/wh300/config --ens_len 120 #--update_gbin ## python gbins: run by "run_lastensq.py" at sea --skip_avg ## see above --max_search_depth 300 --proc_engine python --incremental --find_pflags --hidedisplay --top_plotbin 1 --auto 2011-10-18 11:24:58,048 DEBUG quick_adcp sys.argv = /home/currents/programs/uhdas/scripts/run_quick.py -d wh300 2011-10-18 11:24:58,049 DEBUG quick_adcp progdir = /home/currents/programs 2011-10-18 11:24:58,049 DEBUG quick_adcp binos = lnx64 2011-10-18 11:24:58,050 DEBUG quick_setup found cruise_info.hcorr (ashpaq2, paq, 0) 2011-10-18 11:24:58,051 INFO quick_adcp importing numpy 2011-10-18 11:24:58,052 INFO quick_adcp importing matplotlib 2011-10-18 11:24:58,052 DEBUG quick_adcp ------processor dictionary:------ __doc__ __init__ __module__ aflagit_setup as_cont as_nav as_vect asetup catnav check_beamangle check_dbinfo check_headcorr check_opts check_uhdascfg ddtime def_qlist del_overlapping fill_thisload_timerange get_asvars get_cmd_timerange get_filelist get_nodb_times get_time_range getmat ldcodas listblocks llgrid loadping lst_btrk lst_conf lst_hdg lst_temp mpltest norotate opts plotbtcal_mpl plothcorr_mpl plotnav_mpl plotrefl_mpl plottemp_mpl plotwtcal_mpl putnav refabs refabsbt rotate rotated run_adcpsect run_applyedit run_autoedit_npy run_calc run_calib run_editsetup run_findpflags run_getheadcorr run_getnav run_loaddb run_loadping run_lstconfig run_lsttemp run_matbincmd run_matfiles run_pingavg_npy run_plotter run_putnav run_py_codaseditsetup run_py_findpflags run_py_pingeditsetup run_pybincmd run_pygbin_npy run_refabs run_refplots run_refsm run_refsm_npy run_rotate run_scanbin_npy run_scandata run_scanping_npy run_setflags run_smoothr run_updategbin run_updatepygbin run_xducerxy scanping setflags smoothr timegrid timslip ubprint user_defined_headfunc write_codas_editdefaults write_ping_editdefaults write_timerange_file zapsetup 2011-10-18 11:24:58,052 DEBUG quick_adcp cwd is /home/data/EN500/proc/wh300 about to run these steps: editsetup scandata avg_and_load setflags getnav get_headcorr rotate adcpsect refabs smoothnav putnav refplots find_pflags apply_edit navsteps lst_temp calib matfiles find_pflags 2011-10-18 11:24:58,052 DEBUG quick_adcp original fix file is a_en.gps 2011-10-18 11:24:58,052 DEBUG quick_adcp smoothed nav file is a_en_refsm.asc 2011-10-18 11:24:58,053 DEBUG quick_asect extracting matlab files for wh300, bb pings 2011-10-18 11:24:58,067 DEBUG quick_subs found 73 files using wildcard expansion from "/home/data/EN500/raw/wh300/*.raw" 2011-10-18 11:24:58,067 DEBUG quick_adcp starting with data files (as seen from scan/ or load/ directory): /home/data/EN500/raw/wh300/en2011_284_49415.raw ... 2011-10-18 11:24:58,068 DEBUG quick_adcp starting with data files (as seen from scan/ or load/ directory): /home/data/EN500/raw/wh300/en2011_284_49415.raw ... 2011-10-18 11:24:58,068 DEBUG quick_adcp Tue Oct 18 11:24:58 2011 running quick_adcp.py as follows: --cntfile /home/data/EN500/proc/wh300/wh300_qpy.cnt ----- adcpsect variables ------ cbasename contour dbname a_en dbpath ../adcpdb deeper_boundaries [40, 60, 80, 100, 120] firstdepth 12 gridnum 80 increment 2 loaded_time_range all numbins 128 outdir . pgmin 50 prefix allbins_ proc_yearbase 2011 rl_endbin 20 rl_startbin 2 ss_string separate timegrid 60 vbasename vector ----- quick_adcp.py variables and current values ------ adjust_time 1 auto True beamangle 20 best_loggerdday_name unix_dday best_utcdday_name dday bindir /home/currents/programs/codas3/bin/lnx64 binos lnx64 btrk_step 1 cfgpath /home/data/EN500/proc/wh300/config cntfile /home/data/EN500/proc/wh300/wh300_qpy.cnt commands None configtype python cruisename EN500 data_def vmadcp.def datadir /home/data/EN500/raw/wh300 datafile_glob *.raw datatype uhdas dbname a_en dday_bailout None debug False diarystr diary quick_adcp.diary displaystr set(0,'defaultfigureposition',[0 0 300 400]) set(0,'defaultfiguremenubar','none') set(0,'defaultfiguretoolbar','none') ducer_depth 0 editcfg_file override_editcfg enddday_file None ens_halign None ens_len 120 ensgyrorbin False expert None filelist ['/home/data/EN500/raw/wh300/en2011_284_49415.raw', '/home/data/EN500/raw/wh300/en2011_284_50092.raw', '/home/data/EN500/raw/wh300/en2011_284_50400.raw', '/home/data/EN500/raw/wh300/en2011_284_57600.raw', '/home/data/EN500/raw/wh300/en2011_284_64800.raw', '/home/data/EN500/raw/wh300/en2011_284_72000.raw', '/home/data/EN500/raw/wh300/en2011_284_79200.raw', '/home/data/EN500/raw/wh300/en2011_285_00000.raw', '/home/data/EN500/raw/wh300/en2011_285_07200.raw', '/home/data/EN500/raw/wh300/en2011_285_14400.raw', '/home/data/EN500/raw/wh300/en2011_285_21600.raw', '/home/data/EN500/raw/wh300/en2011_285_28800.raw', '/home/data/EN500/raw/wh300/en2011_285_36000.raw', '/home/data/EN500/raw/wh300/en2011_285_43200.raw', '/home/data/EN500/raw/wh300/en2011_285_50400.raw', '/home/data/EN500/raw/wh300/en2011_285_57600.raw', '/home/data/EN500/raw/wh300/en2011_285_64800.raw', '/home/data/EN500/raw/wh300/en2011_285_72000.raw', '/home/data/EN500/raw/wh300/en2011_285_79200.raw', '/home/data/EN500/raw/wh300/en2011_286_00000.raw', '/home/data/EN500/raw/wh300/en2011_286_07200.raw', '/home/data/EN500/raw/wh300/en2011_286_14400.raw', '/home/data/EN500/raw/wh300/en2011_286_21600.raw', '/home/data/EN500/raw/wh300/en2011_286_28800.raw', '/home/data/EN500/raw/wh300/en2011_286_36000.raw', '/home/data/EN500/raw/wh300/en2011_286_43200.raw', '/home/data/EN500/raw/wh300/en2011_286_50400.raw', '/home/data/EN500/raw/wh300/en2011_286_57600.raw', '/home/data/EN500/raw/wh300/en2011_286_64800.raw', '/home/data/EN500/raw/wh300/en2011_286_72000.raw', '/home/data/EN500/raw/wh300/en2011_286_79200.raw', '/home/data/EN500/raw/wh300/en2011_287_00000.raw', '/home/data/EN500/raw/wh300/en2011_287_07200.raw', '/home/data/EN500/raw/wh300/en2011_287_14400.raw', '/home/data/EN500/raw/wh300/en2011_287_21600.raw', '/home/data/EN500/raw/wh300/en2011_287_28800.raw', '/home/data/EN500/raw/wh300/en2011_287_36000.raw', '/home/data/EN500/raw/wh300/en2011_287_43200.raw', '/home/data/EN500/raw/wh300/en2011_287_50400.raw', '/home/data/EN500/raw/wh300/en2011_287_57600.raw', '/home/data/EN500/raw/wh300/en2011_287_64800.raw', '/home/data/EN500/raw/wh300/en2011_287_72000.raw', '/home/data/EN500/raw/wh300/en2011_287_79200.raw', '/home/data/EN500/raw/wh300/en2011_288_00000.raw', '/home/data/EN500/raw/wh300/en2011_288_07200.raw', '/home/data/EN500/raw/wh300/en2011_288_14400.raw', '/home/data/EN500/raw/wh300/en2011_288_21600.raw', '/home/data/EN500/raw/wh300/en2011_288_28800.raw', '/home/data/EN500/raw/wh300/en2011_288_36000.raw', '/home/data/EN500/raw/wh300/en2011_288_43200.raw', '/home/data/EN500/raw/wh300/en2011_288_50400.raw', '/home/data/EN500/raw/wh300/en2011_288_57600.raw', '/home/data/EN500/raw/wh300/en2011_288_64800.raw', '/home/data/EN500/raw/wh300/en2011_288_72000.raw', '/home/data/EN500/raw/wh300/en2011_288_79200.raw', '/home/data/EN500/raw/wh300/en2011_289_00000.raw', '/home/data/EN500/raw/wh300/en2011_289_07200.raw', '/home/data/EN500/raw/wh300/en2011_289_14400.raw', '/home/data/EN500/raw/wh300/en2011_289_21600.raw', '/home/data/EN500/raw/wh300/en2011_289_28800.raw', '/home/data/EN500/raw/wh300/en2011_289_36000.raw', '/home/data/EN500/raw/wh300/en2011_289_43200.raw', '/home/data/EN500/raw/wh300/en2011_289_50400.raw', '/home/data/EN500/raw/wh300/en2011_289_57600.raw', '/home/data/EN500/raw/wh300/en2011_289_64800.raw', '/home/data/EN500/raw/wh300/en2011_289_72000.raw', '/home/data/EN500/raw/wh300/en2011_289_79200.raw', '/home/data/EN500/raw/wh300/en2011_290_00000.raw', '/home/data/EN500/raw/wh300/en2011_290_07200.raw', '/home/data/EN500/raw/wh300/en2011_290_14400.raw', '/home/data/EN500/raw/wh300/en2011_290_21600.raw', '/home/data/EN500/raw/wh300/en2011_290_28800.raw', '/home/data/EN500/raw/wh300/en2011_290_36000.raw'] filter_hwidth 0.0208 find_pflags True firstdepth 12 fixfile a_en.gps frequency 300 gbin_style python gbindirbase /home/data/EN500/gbin hcorr_inst ashpaq2 help False hidedisplay True incremental True instname wh300 jitter 15 max_BLKprofiles 399 max_search_depth 300 maxrunsecs None min_filter_fraction 0.5 model wh nosave_editcfg 0 num_persistence 24 numbins 128 orig_fixfile a_en.gps overview False pgmin 50 ping_headcorr False pingtype bb post_headcorr None printformats png proc_engine python proc_yearbase 2011 progdir /home/currents/programs py_gbindirbase /home/data/EN500/gbin quiet False rawstd_cutoff None rl_endbin 20 rl_startbin 2 rotate_amplitude 1 rotate_angle 0 rotate_file None save_editcfg 1 save_lastens 0 setup_info False skip_avg True smfile a_en_refsm.asc sonar wh300 steps2rerun timeout_secs 86400 tips False tktail False top_plotbin 1 ub_type 1920 update_gbin False use_refsm True use_smoothr False vardoc False varvals False wtrk_step 7 xducer_dx False xducer_dy False yearbase 2011 configured to run the following steps: editsetup scandata avg_and_load setflags getnav get_headcorr rotate adcpsect refabs smoothnav putnav refplots find_pflags apply_edit navsteps lst_temp calib matfiles find_pflags 2011-10-18 11:24:58,068 DEBUG quick_run ------------ step 3 (create suitable setup files for editing) ------------- 2011-10-18 11:24:58,069 DEBUG quick_run executing commands from /home/data/EN500/proc/wh300/edit 2011-10-18 11:24:58,069 DEBUG quick_run setup.m exists. not replacing 2011-10-18 11:24:58,069 DEBUG quick_run asetup.m exists. not replacing 2011-10-18 11:24:58,069 DEBUG quick_run aflagit_setup.m exists. not replacing 2011-10-18 11:24:58,069 DEBUG quick_adcp about to run numpy scan, requiring python gbins 2011-10-18 11:24:58,069 DEBUG quick_npy Starting: scanping 2011-10-18 11:24:58,135 DEBUG quick_npy Ending: scanping 2011-10-18 11:24:58,136 DEBUG quick_subs start_end_time 2011/10/12 14:00:00 to 2011/10/12 13:54:14 2011-10-18 11:24:58,136 DEBUG quick_subs dd0: 284.583333 dd1: 284.579329 2011-10-18 11:24:58,137 DEBUG quick_adcp in quick_adcp.py: after scan; look for database times in /home/data/EN500/proc/wh300 2011-10-18 11:24:58,137 DEBUG quick_adcp looking for database with adcpdb/a_en*.blk 2011-10-18 11:24:58,137 DEBUG quick_adcp database found: listing blocks 2011-10-18 11:24:58,137 DEBUG quick_subs removing a_endir.blk 2011-10-18 11:24:58,138 DEBUG quick_subs about to run mkblkdir 2011-10-18 11:24:58,138 DEBUG quick_subs database still exists; rerunning mkdirblk 2011-10-18 11:24:58,138 DEBUG quick_subs running /home/currents/programs/codas3/bin/lnx64/mkblkdir mkblkdir.tmp 2011-10-18 11:24:58,149 DEBUG quick_subs database passes. 2011-10-18 11:24:58,150 DEBUG quick_subs start_end_time 2011/10/12 13:45:36 to 2011/10/18 10:53:37 2011-10-18 11:24:58,150 DEBUG quick_subs dd0: 284.573333 dd1: 290.453900 2011-10-18 11:24:58,150 DEBUG quick_adcp in quick_adcp.py before load, just looked for database times 2011-10-18 11:24:58,150 DEBUG quick_adcp origdb_time_range is 2011/10/12 13:45:36 to 2011/10/18 10:53:37 2011-10-18 11:24:58,150 DEBUG quick_adcp (284.573333 to 290.453900) 2011-10-18 11:24:58,150 DEBUG quick_run file load/ping_editparams.txt exists. not replacing 2011-10-18 11:24:58,150 DEBUG quick_setup starting in /home/data/EN500/proc/wh300 2011-10-18 11:24:58,151 DEBUG quick_setup executing commands from /home/data/EN500/proc/wh300/load 2011-10-18 11:24:58,151 DEBUG quick_setup running python command "run_pingavg_npy" 2011-10-18 11:24:58,151 DEBUG quick_npy Starting: pingavg 2011-10-18 11:24:58,153 DEBUG quick_npy singleping editing parameters: 2011-10-18 11:24:58,153 DEBUG quick_npy bigtarget_mab_window : 11 2011-10-18 11:24:58,153 DEBUG quick_npy rl_endbin : 20 2011-10-18 11:24:58,153 DEBUG quick_npy max_search_depth : 300 2011-10-18 11:24:58,153 DEBUG quick_npy cor_cutoff : 70 2011-10-18 11:24:58,153 DEBUG quick_npy ampfilt : 40 2011-10-18 11:24:58,153 DEBUG quick_npy bigtarget_lgb_margin : 0.500000 2011-10-18 11:24:58,153 DEBUG quick_npy rl_startbin : 2 2011-10-18 11:24:58,153 DEBUG quick_npy ecutoff : 1 2011-10-18 11:24:58,153 DEBUG quick_npy refavg_valcutoff : 1 2011-10-18 11:24:58,154 DEBUG quick_npy weakprof_percent : 30 2011-10-18 11:24:58,154 DEBUG quick_npy bigtarget_ampthresh : 55 2011-10-18 11:24:58,161 INFO pingavg Pingavg.run for time range 290.416678 to 290.474870 2011-10-18 11:24:58,192 DEBUG pingavg Chunk 1 of 1, 290.416678 to 290.474870 2011-10-18 11:24:58,192 DEBUG pingavg Nothing written 2011-10-18 11:24:58,192 DEBUG quick_npy wrote 0 averages 2011-10-18 11:24:58,193 DEBUG quick_npy Ending: pingavg 2011-10-18 11:24:58,193 DEBUG quick_subs in del_overlapping 2011-10-18 11:24:58,193 DEBUG quick_subs lastblock: 2011-10-18 11:24:58,194 DEBUG quick_subs 15 2011-10-18 11:24:58,194 DEBUG quick_subs lastcmd: 2011-10-18 11:24:58,194 DEBUG quick_subs 15 2011-10-18 11:24:58,194 DEBUG quick_subs delblks: 2011-10-18 11:24:58,194 DEBUG quick_subs [15] 2011-10-18 11:24:58,194 DEBUG quick_subs loadblks: 2011-10-18 11:24:58,194 DEBUG quick_subs [15] 2011-10-18 11:24:58,194 DEBUG quick_subs about to run mkblkdir 2011-10-18 11:24:58,195 DEBUG quick_subs database still exists; rerunning mkdirblk 2011-10-18 11:24:58,195 DEBUG quick_subs running /home/currents/programs/codas3/bin/lnx64/mkblkdir mkblkdir.tmp 2011-10-18 11:24:58,206 DEBUG quick_subs database passes. 2011-10-18 11:24:58,206 DEBUG quick_subs start_end_time 2011/10/12 13:45:36 to 2011/10/18 09:43:37 2011-10-18 11:24:58,206 DEBUG quick_subs dd0: 284.573333 dd1: 290.405289 2011-10-18 11:24:58,207 DEBUG quick_run [15] 2011-10-18 11:24:58,207 DEBUG quick_run cmdlist 2011-10-18 11:24:58,207 DEBUG quick_run ['./ens_blk015.cmd'] 2011-10-18 11:24:58,208 INFO quick_run Warning: 1 files will be loaded; 15 already exist 2011-10-18 11:24:58,208 INFO quick_run Tue Oct 18 11:24:58 2011 2011-10-18 11:24:58,208 INFO quick_run about to load uhdas files 2011-10-18 11:24:58,208 INFO quick_run /home/data/EN500/raw/wh300/en2011_284_49415.raw /home/data/EN500/raw/wh300/en2011_284_50092.raw /home/data/EN500/raw/wh300/en2011_284_50400.raw /home/data/EN500/raw/wh300/en2011_284_57600.raw /home/data/EN500/raw/wh300/en2011_284_64800.raw /home/data/EN500/raw/wh300/en2011_284_72000.raw /home/data/EN500/raw/wh300/en2011_284_79200.raw /home/data/EN500/raw/wh300/en2011_285_00000.raw /home/data/EN500/raw/wh300/en2011_285_07200.raw /home/data/EN500/raw/wh300/en2011_285_14400.raw /home/data/EN500/raw/wh300/en2011_285_21600.raw /home/data/EN500/raw/wh300/en2011_285_28800.raw /home/data/EN500/raw/wh300/en2011_285_36000.raw /home/data/EN500/raw/wh300/en2011_285_43200.raw /home/data/EN500/raw/wh300/en2011_285_50400.raw /home/data/EN500/raw/wh300/en2011_285_57600.raw /home/data/EN500/raw/wh300/en2011_285_64800.raw /home/data/EN500/raw/wh300/en2011_285_72000.raw /home/data/EN500/raw/wh300/en2011_285_79200.raw /home/data/EN500/raw/wh300/en2011_286_00000.raw /home/data/EN500/raw/wh300/en2011_286_07200.raw /home/data/EN500/raw/wh300/en2011_286_14400.raw /home/data/EN500/raw/wh300/en2011_286_21600.raw /home/data/EN500/raw/wh300/en2011_286_28800.raw /home/data/EN500/raw/wh300/en2011_286_36000.raw /home/data/EN500/raw/wh300/en2011_286_43200.raw /home/data/EN500/raw/wh300/en2011_286_50400.raw /home/data/EN500/raw/wh300/en2011_286_57600.raw /home/data/EN500/raw/wh300/en2011_286_64800.raw /home/data/EN500/raw/wh300/en2011_286_72000.raw /home/data/EN500/raw/wh300/en2011_286_79200.raw /home/data/EN500/raw/wh300/en2011_287_00000.raw /home/data/EN500/raw/wh300/en2011_287_07200.raw /home/data/EN500/raw/wh300/en2011_287_14400.raw /home/data/EN500/raw/wh300/en2011_287_21600.raw /home/data/EN500/raw/wh300/en2011_287_28800.raw /home/data/EN500/raw/wh300/en2011_287_36000.raw /home/data/EN500/raw/wh300/en2011_287_43200.raw /home/data/EN500/raw/wh300/en2011_287_50400.raw /home/data/EN500/raw/wh300/en2011_287_57600.raw /home/data/EN500/raw/wh300/en2011_287_64800.raw /home/data/EN500/raw/wh300/en2011_287_72000.raw /home/data/EN500/raw/wh300/en2011_287_79200.raw /home/data/EN500/raw/wh300/en2011_288_00000.raw /home/data/EN500/raw/wh300/en2011_288_07200.raw /home/data/EN500/raw/wh300/en2011_288_14400.raw /home/data/EN500/raw/wh300/en2011_288_21600.raw /home/data/EN500/raw/wh300/en2011_288_28800.raw /home/data/EN500/raw/wh300/en2011_288_36000.raw /home/data/EN500/raw/wh300/en2011_288_43200.raw /home/data/EN500/raw/wh300/en2011_288_50400.raw /home/data/EN500/raw/wh300/en2011_288_57600.raw /home/data/EN500/raw/wh300/en2011_288_64800.raw /home/data/EN500/raw/wh300/en2011_288_72000.raw /home/data/EN500/raw/wh300/en2011_288_79200.raw /home/data/EN500/raw/wh300/en2011_289_00000.raw /home/data/EN500/raw/wh300/en2011_289_07200.raw /home/data/EN500/raw/wh300/en2011_289_14400.raw /home/data/EN500/raw/wh300/en2011_289_21600.raw /home/data/EN500/raw/wh300/en2011_289_28800.raw /home/data/EN500/raw/wh300/en2011_289_36000.raw /home/data/EN500/raw/wh300/en2011_289_43200.raw /home/data/EN500/raw/wh300/en2011_289_50400.raw /home/data/EN500/raw/wh300/en2011_289_57600.raw /home/data/EN500/raw/wh300/en2011_289_64800.raw /home/data/EN500/raw/wh300/en2011_289_72000.raw /home/data/EN500/raw/wh300/en2011_289_79200.raw /home/data/EN500/raw/wh300/en2011_290_00000.raw /home/data/EN500/raw/wh300/en2011_290_07200.raw /home/data/EN500/raw/wh300/en2011_290_14400.raw /home/data/EN500/raw/wh300/en2011_290_21600.raw /home/data/EN500/raw/wh300/en2011_290_28800.raw /home/data/EN500/raw/wh300/en2011_290_36000.raw 2011-10-18 11:24:58,208 DEBUG quick_setup load/ldcodas.tmp exists 2011-10-18 11:24:58,208 DEBUG quick_setup starting in /home/data/EN500/proc/wh300 2011-10-18 11:24:58,209 DEBUG quick_setup executing commands from /home/data/EN500/proc/wh300/load 2011-10-18 11:24:58,209 DEBUG quick_setup running python command "ldcodas" 2011-10-18 11:24:58,209 DEBUG quick_subs filling "thisload" timerange 2011-10-18 11:24:58,209 DEBUG quick_subs in ldcodas 2011-10-18 11:24:58,209 DEBUG quick_subs cmdlist: 2011-10-18 11:24:58,210 DEBUG quick_subs ['./ens_blk015.cmd'] 2011-10-18 11:24:58,210 DEBUG quick_subs DATABASE_NAME: ../adcpdb/a_en DEFINITION_FILE: vmadcp.def LOG_FILE: load.log YEAR_BASE: 2011 cmd_file_list /* use only if specifying cmd paths, not "@" */ END ./ens_blk015.cmd 2011-10-18 11:24:58,210 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/ldcodas ldcodas.tmp 2011-10-18 11:24:58,223 DEBUG quick_subs removing a_endir.blk 2011-10-18 11:24:58,223 DEBUG quick_subs about to run mkblkdir 2011-10-18 11:24:58,223 DEBUG quick_subs database still exists; rerunning mkdirblk 2011-10-18 11:24:58,224 DEBUG quick_subs running /home/currents/programs/codas3/bin/lnx64/mkblkdir mkblkdir.tmp 2011-10-18 11:24:58,235 DEBUG quick_subs database passes. 2011-10-18 11:24:58,235 DEBUG quick_subs start_end_time 2011/10/12 13:45:36 to 2011/10/18 11:23:37 2011-10-18 11:24:58,235 DEBUG quick_subs dd0: 284.573333 dd1: 290.474734 2011-10-18 11:24:58,235 INFO quick_adcp --------------------- 2011-10-18 11:24:58,236 INFO quick_adcp loaded_time_range is 2011/10/12 13:45:36 to 2011/10/18 11:23:37 2011-10-18 11:24:58,236 INFO quick_adcp (284.573333 to 290.474734) 2011-10-18 11:24:58,236 INFO quick_adcp origdb_time_range is 2011/10/12 13:45:36 to 2011/10/18 10:53:37 2011-10-18 11:24:58,236 INFO quick_adcp (284.573333 to 290.453900) 2011-10-18 11:24:58,236 INFO quick_adcp thisload_time_range is 2011/10/18 09:45:37 to 2011/10/18 11:23:37 2011-10-18 11:24:58,236 INFO quick_adcp (290.406678 to 290.406678) 2011-10-18 11:24:58,236 INFO quick_adcp --------------------- 2011-10-18 11:24:58,237 DEBUG quick_setup starting in /home/data/EN500/proc/wh300 2011-10-18 11:24:58,237 DEBUG quick_setup executing commands from /home/data/EN500/proc/wh300/adcpdb 2011-10-18 11:24:58,237 DEBUG quick_setup running python command "lst_conf" 2011-10-18 11:24:58,237 DEBUG quick_subs dbname: a_en output: a_en.cnh time_ranges: all 2011-10-18 11:24:58,237 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/lst_conf lst_conf.tmp 2011-10-18 11:24:58,314 DEBUG quick_setup found (in edit/asetup.m): 2011-10-18 11:24:58,314 DEBUG quick_setup config.beamangle is 20 2011-10-18 11:24:58,314 DEBUG quick_run file edit/codas_editparams.txt exists. not replacing 2011-10-18 11:24:58,314 DEBUG quick_run ------------ step 4: run setflags ------------- 2011-10-18 11:24:58,315 DEBUG quick_setup starting in /home/data/EN500/proc/wh300 2011-10-18 11:24:58,315 DEBUG quick_setup executing commands from /home/data/EN500/proc/wh300/edit 2011-10-18 11:24:58,315 DEBUG quick_setup running python command "setflags" 2011-10-18 11:24:58,315 DEBUG quick_subs dbname: ../adcpdb/a_en pg_min: 50 set_range_bit time_ranges: all 2011-10-18 11:24:58,315 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/setflags setflags.tmp 2011-10-18 11:24:58,358 DEBUG quick_run ------------ step 5: get fixes from load/*.gps2 files ------------- 2011-10-18 11:24:58,358 DEBUG quick_setup starting in /home/data/EN500/proc/wh300 2011-10-18 11:24:58,358 DEBUG quick_setup executing commands from /home/data/EN500/proc/wh300/nav 2011-10-18 11:24:58,358 DEBUG quick_setup running python command "catnav" 2011-10-18 11:24:58,361 DEBUG quick_run ------------ step 6: get heading correction (if applicable) ------------- 2011-10-18 11:24:58,361 DEBUG quick_run hcorr_inst is ashpaq2 2011-10-18 11:24:58,361 DEBUG quick_setup cal/rotate/lst_hdg.tmp exists 2011-10-18 11:24:58,361 DEBUG quick_setup starting in /home/data/EN500/proc/wh300 2011-10-18 11:24:58,361 DEBUG quick_setup executing commands from /home/data/EN500/proc/wh300/cal/rotate 2011-10-18 11:24:58,361 DEBUG quick_setup running python command "lst_hdg" 2011-10-18 11:24:58,362 DEBUG quick_subs dbname: ../../adcpdb/a_en output: scn.hdg step_size= 1 year_base= 2011 time_ranges: all 2011-10-18 11:24:58,362 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/lst_hdg lst_hdg.tmp 2011-10-18 11:24:58,393 DEBUG quick_mpl Starting plot: hcorr 2011-10-18 11:24:58,441 DEBUG quick_mplplots found 5.901393 days of data 2011-10-18 11:24:58,441 DEBUG quick_mplplots figures with 4 panels per page, 1.000000 days per panel 2011-10-18 11:24:58,442 DEBUG quick_mplplots printing 2 pages 2011-10-18 11:24:59,146 DEBUG quick_mpl Ending plot: hcorr 2011-10-18 11:24:59,146 DEBUG quick_run ------------ step 7: rotate ------------- 2011-10-18 11:24:59,146 DEBUG quick_setup cal/rotate/norotate.tmp exists 2011-10-18 11:24:59,146 DEBUG quick_setup starting in /home/data/EN500/proc/wh300 2011-10-18 11:24:59,146 DEBUG quick_setup executing commands from /home/data/EN500/proc/wh300/cal/rotate 2011-10-18 11:24:59,146 DEBUG quick_setup running python command "norotate" 2011-10-18 11:24:59,147 DEBUG quick_subs /* No rotation was done using the "rotate" command, but */ /* it is useful have the skeleton of a rotate.tmp file */ /* to edit, should the need arise. That is the purpose */ /* of this file. DB_NAME: ../../adcpdb/a_en LOG_FILE: rotate.log TIME_RANGE: 2011/10/12 13:45:36 to 2011/10/18 11:23:37 OPTION_LIST: water_and_bottom_track: year_base= 2011 /* time_angle_file: time_angle.ang */ amplitude= 1.0 angle_0= 0.0 end end 2011-10-18 11:24:59,147 DEBUG quick_setup about to run echo "writing dummy rotate file" 2011-10-18 11:24:59,154 DEBUG quick_run ------------ step 8: run adcpsect (for calib) ------------- 2011-10-18 11:24:59,154 DEBUG quick_setup nav/as_nav.tmp exists 2011-10-18 11:24:59,154 DEBUG quick_setup starting in /home/data/EN500/proc/wh300 2011-10-18 11:24:59,154 DEBUG quick_setup executing commands from /home/data/EN500/proc/wh300/nav 2011-10-18 11:24:59,154 DEBUG quick_setup running python command "as_nav" 2011-10-18 11:24:59,154 DEBUG quick_subs dbname: ../adcpdb/a_en output: a_en step_size: 1 ndepth: 20 time_ranges: separate year_base= 2011 option_list: pg_min= 50 navigation: reference_bins 2 to 20 end statistics: mean units= 0.01 /* cm/s instead of default m/s */ end flag_mask: ALL_BITS end end 2011/10/12 13:45:36 to 2011/10/18 11:23:37 /* the whole time range */ 2011-10-18 11:24:59,155 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/adcpsect as_nav.tmp 2011-10-18 11:24:59,215 DEBUG quick_run ------------ step 9: run refabs (for calib) ------------- 2011-10-18 11:24:59,215 DEBUG quick_setup starting in /home/data/EN500/proc/wh300 2011-10-18 11:24:59,215 DEBUG quick_setup executing commands from /home/data/EN500/proc/wh300/nav 2011-10-18 11:24:59,216 DEBUG quick_setup running python command "refabs" 2011-10-18 11:24:59,216 DEBUG quick_subs fix_file_type: simple reference_file: a_en.nav fix_file: a_en.gps output: a_en.ref year_base= 2011 ensemble_length= 120 gap_tolerance= 10 2011-10-18 11:24:59,216 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/refabs refabs.tmp 2011-10-18 11:24:59,258 DEBUG quick_run ------------ step 10: get smoothed navigation (for calib) ------------- 2011-10-18 11:24:59,259 DEBUG quick_setup nav/smoothr.tmp exists 2011-10-18 11:24:59,259 DEBUG quick_setup starting in /home/data/EN500/proc/wh300 2011-10-18 11:24:59,259 DEBUG quick_setup executing commands from /home/data/EN500/proc/wh300/nav 2011-10-18 11:24:59,259 DEBUG quick_setup running python command "smoothr" 2011-10-18 11:24:59,259 DEBUG quick_subs reference_file: a_en.nav refabs_output: a_en.ref output: a_en.sm filter_hwidth= 0.0208 min_filter_fraction= 0.5 max_gap_ratio= 0.05 max_gap_distance= 50 max_gap_time= 30 /* 0.5 minutes */ ensemble_time= 120 max_speed= 5.0 min_speed= 1.0 iterations= 5 fix_to_dr_limit= 0.00050 2011-10-18 11:24:59,259 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/smoothr smoothr.tmp 2011-10-18 11:24:59,492 DEBUG quick_adcp about to run numpy refsm 2011-10-18 11:24:59,492 DEBUG quick_npy Starting: refsm 2011-10-18 11:24:59,655 INFO nav dtmin = -0.50 dtmax = 0.50 2011-10-18 11:24:59,823 DEBUG quick_npy Ending: refsm 2011-10-18 11:25:00,226 DEBUG quick_run ------------ step 11: put smoothed navigation back into database ------------- 2011-10-18 11:25:00,226 DEBUG quick_setup nav/putnav.tmp exists 2011-10-18 11:25:00,226 DEBUG quick_setup starting in /home/data/EN500/proc/wh300 2011-10-18 11:25:00,227 DEBUG quick_setup executing commands from /home/data/EN500/proc/wh300/nav 2011-10-18 11:25:00,227 DEBUG quick_setup running python command "putnav" 2011-10-18 11:25:00,227 DEBUG quick_subs dbname: ../adcpdb/a_en position_file: a_en_refsm.asc year_base= 2011 tolerance= 5 navigation_sources: gps end 2011-10-18 11:25:00,227 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/putnav putnav.tmp 2011-10-18 11:25:00,336 DEBUG quick_adcp plotting navigation 2011-10-18 11:25:00,336 DEBUG quick_mpl Starting plot: nav 2011-10-18 11:25:00,691 DEBUG quick_mpl Ending plot: nav 2011-10-18 11:25:00,691 DEBUG quick_mpl Starting plot: refl 2011-10-18 11:25:00,805 DEBUG quick_mplplots found 5.898619 days of data 2011-10-18 11:25:00,805 DEBUG quick_mplplots start day is 284.000000 2011-10-18 11:25:00,805 DEBUG quick_mplplots figures with 2.000000 days per page 2011-10-18 11:25:00,805 DEBUG quick_mplplots printing 4 pages 2011-10-18 11:25:00,805 DEBUG quick_mplplots yrange will be [1.000000, 1.000000] 2011-10-18 11:25:00,806 INFO quick_mplplots startdd is 284.0 2011-10-18 11:25:00,806 INFO quick_mplplots dt is 2.0 2011-10-18 11:25:01,494 DEBUG quick_mpl Ending plot: refl 2011-10-18 11:25:01,494 DEBUG quick_run ------------ step 13: automatically find profile flags using python ------------- 2011-10-18 11:25:01,494 DEBUG quick_run find profile flags ------------ *** ------------- 2011-10-18 11:25:01,495 DEBUG quick_setup starting in /home/data/EN500/proc/wh300 2011-10-18 11:25:01,495 DEBUG quick_setup executing commands from /home/data/EN500/proc/wh300/edit 2011-10-18 11:25:01,495 DEBUG quick_setup running python command "run_autoedit_npy" 2011-10-18 11:25:01,495 DEBUG quick_npy Starting: autoedit 2011-10-18 11:25:01,723 DEBUG quick_npy Ending: autoedit 2011-10-18 11:25:01,723 DEBUG quick_run ------------ step 14: apply all profile flags to database ------------- 2011-10-18 11:25:01,723 DEBUG quick_run starting in: /home/data/EN500/proc/wh300 2011-10-18 11:25:01,724 DEBUG quick_run executing commands from: edit 2011-10-18 11:25:01,725 DEBUG quick_run about to run /home/currents/programs/codas3/bin/lnx64/badbin ../adcpdb/a_en abadbin_tmp.asc 2011-10-18 11:25:01,735 DEBUG quick_run about to run /home/currents/programs/codas3/bin/lnx64/set_lgb ../adcpdb/a_en 20 2011-10-18 11:25:01,744 DEBUG quick_run about to run /home/currents/programs/codas3/bin/lnx64/setflags setflags.tmp 2011-10-18 11:25:01,788 DEBUG quick_run changing directories back to /home/data/EN500/proc/wh300 2011-10-18 11:25:01,789 DEBUG quick_adcp step 15: rerun nav steps, redo reflayer plots 2011-10-18 11:25:01,789 DEBUG quick_run ------------ step 8: run adcpsect (for calib) ------------- 2011-10-18 11:25:01,789 DEBUG quick_setup nav/as_nav.tmp exists 2011-10-18 11:25:01,789 DEBUG quick_setup starting in /home/data/EN500/proc/wh300 2011-10-18 11:25:01,789 DEBUG quick_setup executing commands from /home/data/EN500/proc/wh300/nav 2011-10-18 11:25:01,789 DEBUG quick_setup running python command "as_nav" 2011-10-18 11:25:01,789 DEBUG quick_subs dbname: ../adcpdb/a_en output: a_en step_size: 1 ndepth: 20 time_ranges: separate year_base= 2011 option_list: pg_min= 50 navigation: reference_bins 2 to 20 end statistics: mean units= 0.01 /* cm/s instead of default m/s */ end flag_mask: ALL_BITS end end 2011/10/12 13:45:36 to 2011/10/18 11:23:37 /* the whole time range */ 2011-10-18 11:25:01,789 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/adcpsect as_nav.tmp 2011-10-18 11:25:01,847 DEBUG quick_run ------------ step 9: run refabs (for calib) ------------- 2011-10-18 11:25:01,848 DEBUG quick_setup starting in /home/data/EN500/proc/wh300 2011-10-18 11:25:01,848 DEBUG quick_setup executing commands from /home/data/EN500/proc/wh300/nav 2011-10-18 11:25:01,848 DEBUG quick_setup running python command "refabs" 2011-10-18 11:25:01,848 DEBUG quick_subs fix_file_type: simple reference_file: a_en.nav fix_file: a_en.gps output: a_en.ref year_base= 2011 ensemble_length= 120 gap_tolerance= 10 2011-10-18 11:25:01,848 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/refabs refabs.tmp 2011-10-18 11:25:01,892 DEBUG quick_run ------------ step 10: get smoothed navigation (for calib) ------------- 2011-10-18 11:25:01,892 DEBUG quick_setup nav/smoothr.tmp exists 2011-10-18 11:25:01,892 DEBUG quick_setup starting in /home/data/EN500/proc/wh300 2011-10-18 11:25:01,893 DEBUG quick_setup executing commands from /home/data/EN500/proc/wh300/nav 2011-10-18 11:25:01,893 DEBUG quick_setup running python command "smoothr" 2011-10-18 11:25:01,893 DEBUG quick_subs reference_file: a_en.nav refabs_output: a_en.ref output: a_en.sm filter_hwidth= 0.0208 min_filter_fraction= 0.5 max_gap_ratio= 0.05 max_gap_distance= 50 max_gap_time= 30 /* 0.5 minutes */ ensemble_time= 120 max_speed= 5.0 min_speed= 1.0 iterations= 5 fix_to_dr_limit= 0.00050 2011-10-18 11:25:01,893 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/smoothr smoothr.tmp 2011-10-18 11:25:02,125 DEBUG quick_adcp running refsm 2011-10-18 11:25:02,125 DEBUG quick_npy Starting: refsm 2011-10-18 11:25:02,267 INFO nav dtmin = -0.50 dtmax = 0.50 2011-10-18 11:25:02,426 DEBUG quick_npy Ending: refsm 2011-10-18 11:25:02,426 DEBUG quick_run ------------ step 11: put smoothed navigation back into database ------------- 2011-10-18 11:25:02,426 DEBUG quick_setup nav/putnav.tmp exists 2011-10-18 11:25:02,426 DEBUG quick_setup starting in /home/data/EN500/proc/wh300 2011-10-18 11:25:02,426 DEBUG quick_setup executing commands from /home/data/EN500/proc/wh300/nav 2011-10-18 11:25:02,426 DEBUG quick_setup running python command "putnav" 2011-10-18 11:25:02,426 DEBUG quick_subs dbname: ../adcpdb/a_en position_file: a_en_refsm.asc year_base= 2011 tolerance= 5 navigation_sources: gps end 2011-10-18 11:25:02,426 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/putnav putnav.tmp 2011-10-18 11:25:02,493 DEBUG quick_mpl Starting plot: nav 2011-10-18 11:25:02,847 DEBUG quick_mpl Ending plot: nav 2011-10-18 11:25:02,847 DEBUG quick_mpl Starting plot: refl 2011-10-18 11:25:02,962 DEBUG quick_mplplots found 5.898619 days of data 2011-10-18 11:25:02,962 DEBUG quick_mplplots start day is 284.000000 2011-10-18 11:25:02,962 DEBUG quick_mplplots figures with 2.000000 days per page 2011-10-18 11:25:02,962 DEBUG quick_mplplots printing 4 pages 2011-10-18 11:25:02,963 DEBUG quick_mplplots yrange will be [1.000000, 1.000000] 2011-10-18 11:25:02,963 INFO quick_mplplots startdd is 284.0 2011-10-18 11:25:02,963 INFO quick_mplplots dt is 2.0 2011-10-18 11:25:03,659 DEBUG quick_mpl Ending plot: refl 2011-10-18 11:25:03,659 DEBUG quick_run ------------ step 16: list temperature and plot it ------------- 2011-10-18 11:25:03,659 DEBUG quick_setup edit/lst_temp.tmp exists 2011-10-18 11:25:03,659 DEBUG quick_setup starting in /home/data/EN500/proc/wh300 2011-10-18 11:25:03,659 DEBUG quick_setup executing commands from /home/data/EN500/proc/wh300/edit 2011-10-18 11:25:03,660 DEBUG quick_setup running python command "lst_temp" 2011-10-18 11:25:03,660 DEBUG quick_subs dbname: ../adcpdb/a_en output: a_en.tem step_size= 1 year_base= 2011 time_ranges: all 2011-10-18 11:25:03,660 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/lst_temp lst_temp.tmp 2011-10-18 11:25:03,698 DEBUG quick_mpl Starting plot: temp 2011-10-18 11:25:03,737 DEBUG quick_mplplots plotting 4250 points 2011-10-18 11:25:04,010 DEBUG quick_mpl Ending plot: temp 2011-10-18 11:25:04,010 DEBUG quick_run ------------ step 17: bottom track and watertrack calibrations ------------- 2011-10-18 11:25:04,011 DEBUG quick_setup cal/botmtrk/lst_btrk.tmp exists 2011-10-18 11:25:04,011 DEBUG quick_setup starting in /home/data/EN500/proc/wh300 2011-10-18 11:25:04,011 DEBUG quick_setup executing commands from /home/data/EN500/proc/wh300/cal/botmtrk 2011-10-18 11:25:04,011 DEBUG quick_setup running python command "lst_btrk" 2011-10-18 11:25:04,011 DEBUG quick_subs dbname: ../../adcpdb/a_en output: a_en.btm step_size= 1 year_base= 2011 time_ranges: 2011/10/12 13:45:36 to 2011/10/18 11:23:37 /* whole time range */ 2011-10-18 11:25:04,011 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/lst_btrk lst_btrk.tmp 2011-10-18 11:25:04,028 DEBUG quick_setup cal/botmtrk/refabsbt.tmp exists 2011-10-18 11:25:04,029 DEBUG quick_setup starting in /home/data/EN500/proc/wh300 2011-10-18 11:25:04,029 DEBUG quick_setup executing commands from /home/data/EN500/proc/wh300/cal/botmtrk 2011-10-18 11:25:04,029 DEBUG quick_setup running python command "refabsbt" 2011-10-18 11:25:04,029 DEBUG quick_subs fix_file_type: simple reference_file: a_en.btm fix_file: ../../nav/a_en.gps output: a_en.ref year_base= 2011 ensemble_length= 120 gap_tolerance= 60 2011-10-18 11:25:04,029 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/refabsbt refabsbt.tmp 2011-10-18 11:25:04,037 DEBUG quick_mpl Starting plot: btcal 2011-10-18 11:25:04,038 DEBUG quick_mplplots No data in a_en.btm 2011-10-18 11:25:04,038 DEBUG quick_mplplots Returning from Btplot with no output 2011-10-18 11:25:04,038 DEBUG quick_mpl Ending plot: btcal 2011-10-18 11:25:04,038 DEBUG quick_setup nav/as_nav.tmp exists 2011-10-18 11:25:04,038 DEBUG quick_setup starting in /home/data/EN500/proc/wh300 2011-10-18 11:25:04,039 DEBUG quick_setup executing commands from /home/data/EN500/proc/wh300/nav 2011-10-18 11:25:04,039 DEBUG quick_setup running python command "as_nav" 2011-10-18 11:25:04,039 DEBUG quick_subs dbname: ../adcpdb/a_en output: a_en step_size: 1 ndepth: 20 time_ranges: separate year_base= 2011 option_list: pg_min= 50 navigation: reference_bins 2 to 20 end statistics: mean units= 0.01 /* cm/s instead of default m/s */ end flag_mask: ALL_BITS end end 2011/10/12 13:45:36 to 2011/10/18 11:23:37 /* the whole time range */ 2011-10-18 11:25:04,039 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/adcpsect as_nav.tmp 2011-10-18 11:25:04,097 DEBUG quick_setup cal/watertrk/timslip.tmp exists 2011-10-18 11:25:04,097 DEBUG quick_setup starting in /home/data/EN500/proc/wh300 2011-10-18 11:25:04,097 DEBUG quick_setup executing commands from /home/data/EN500/proc/wh300/cal/watertrk 2011-10-18 11:25:04,098 DEBUG quick_setup running python command "timslip" 2011-10-18 11:25:04,098 DEBUG quick_subs fix_file_type: simple fix_file: ../../nav/a_en.gps reference_file: ../../nav/a_en.nav output_file: a_en_7.cal year_base= 2011 min_n_fixes= 7 /* 5 7 9 */ n_refs= 7 /* 5 7 9 */ i_ref_l0= 1 i_ref_l1= 2 /* 1 2 3 */ i_ref_r0= 5 /* 4 5 6 */ i_ref_r1= 6 /* 4 6 8 */ up_thresh= 3.0 /* m/s */ down_thresh= 3.0 /* m/s */ turn_speed= 2.0 /* m/s */ turn_thresh= 60 /* degrees */ dtmax= 360 /* seconds, for 300-second ensembles */ tolerance= 5.e-5 /* days, about 5 seconds */ grid: ensemble use_shifted_times? no 2011-10-18 11:25:04,098 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/timslip timslip.tmp 2011-10-18 11:25:04,119 DEBUG quick_mpl Starting plot: wtcal 2011-10-18 11:25:04,121 DEBUG quick_mplplots Found 36 calibration points 2011-10-18 11:25:04,968 DEBUG quick_mpl Ending plot: wtcal 2011-10-18 11:25:05,227 DEBUG quick_asect ------------ step 18: make matlab files for plotting ------------- 2011-10-18 11:25:05,228 DEBUG quick_setup starting in /home/data/EN500/proc/wh300 2011-10-18 11:25:05,228 DEBUG quick_setup executing commands from /home/data/EN500/proc/wh300/vector 2011-10-18 11:25:05,228 DEBUG quick_setup running python command "timegrid" 2011-10-18 11:25:05,228 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/timegrid a_en.tmp 2011-10-18 11:25:05,236 DEBUG quick_setup starting in /home/data/EN500/proc/wh300 2011-10-18 11:25:05,237 DEBUG quick_setup executing commands from /home/data/EN500/proc/wh300/vector 2011-10-18 11:25:05,237 DEBUG quick_setup running python command "as_vect" 2011-10-18 11:25:05,237 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/adcpsect as_vect.tmp 2011-10-18 11:25:05,297 DEBUG quick_asect done making vector matfiles 2011-10-18 11:25:05,298 DEBUG quick_setup starting in /home/data/EN500/proc/wh300 2011-10-18 11:25:05,298 DEBUG quick_setup executing commands from /home/data/EN500/proc/wh300/contour 2011-10-18 11:25:05,298 DEBUG quick_setup running python command "timegrid" 2011-10-18 11:25:05,298 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/timegrid a_en.tmp 2011-10-18 11:25:05,307 DEBUG quick_setup starting in /home/data/EN500/proc/wh300 2011-10-18 11:25:05,308 DEBUG quick_setup executing commands from /home/data/EN500/proc/wh300/contour 2011-10-18 11:25:05,308 DEBUG quick_setup running python command "as_cont" 2011-10-18 11:25:05,308 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx64/adcpsect as_cont.tmp 2011-10-18 11:25:05,409 DEBUG quick_setup starting in /home/data/EN500/proc/wh300 2011-10-18 11:25:05,409 DEBUG quick_setup executing commands from /home/data/EN500/proc/wh300/contour 2011-10-18 11:25:05,409 DEBUG quick_setup about to run getmat -qrs -f allbins_ ../adcpdb/a_en 2011-10-18 11:25:05,769 DEBUG quick_asect done running getmat with "allbins" 2011-10-18 11:25:05,788 INFO root copying NOFIG to /home/adcp/www/figures/wh300_hcorr_plot.png 2011-10-18 11:25:05,788 INFO root copying NOFIG to /home/adcp/www/figures/thumbnails/wh300_hcorr_plot_thumb.png 2011-10-18 11:25:05,788 DEBUG root matfile is contour/contour_uv.mat 2011-10-18 11:25:05,791 INFO root copying contour/contour_uv.mat to /home/adcp/www/data/wh300_cont_uv.mat 2011-10-18 11:25:05,791 DEBUG root matfile is vector/vector_uv.mat 2011-10-18 11:25:05,792 INFO root copying vector/vector_uv.mat to /home/adcp/www/data/wh300_vect_uv.mat 2011-10-18 11:25:05,792 DEBUG root matfile is contour/contour_xy.mat 2011-10-18 11:25:05,792 INFO root copying contour/contour_xy.mat to /home/adcp/www/data/wh300_cont_xy.mat 2011-10-18 11:25:05,792 DEBUG root matfile is vector/vector_xy.mat 2011-10-18 11:25:05,792 INFO root copying vector/vector_xy.mat to /home/adcp/www/data/wh300_vect_xy.mat 2011-10-18 11:25:05,792 DEBUG root about to copy file edit/a_en.tem to /home/adcp/www/data/wh300_temp.asc 2011-10-18 11:25:05,793 INFO root copying edit/a_en.tem to /home/adcp/www/data/wh300_temp.asc 2011-10-18 11:25:06,522 DEBUG root about to copy netcdf file /home/data/EN500/proc/wh300/contour/wh300.nc to /home/adcp/www/data/wh300.nc 2011-10-18 11:25:06,540 INFO root copying edit/a_en.tem to /home/adcp/www/data/wh300.nc 2011-10-18 11:25:06,572 INFO root generating pingstats for wh300 2011-10-18 11:25:06,572 INFO root Ending quick_adcp.py