2010-11-21 18:07:36,074 DEBUG root about to write control file parameters to --yearbase 2010 --pingtype bb --cfgbase EN488 --cruisename EN488 --instclass wh --instname wh300 --dbname a_en --datatype uhdas --datadir /home/data/EN488/raw/wh300 --cfgpath /home/data/EN488/proc/wh300/config --ens_len 120 --ping_headcor --hcorr_inst ashpaq2 --use_topo4edit ## using jitter defaults ## not using matplotlib --delblks 1 --skip_avg --find_pflags --hidedisplay --top_plotbin 1 --quiet --auto --npycalc all --mplplots all 2010-11-21 18:07:36,074 DEBUG quick_adcp sys.argv = /home/currents/programs/uhdas/scripts/run_quick.py -d wh300 --npycalc all --mplplots all 2010-11-21 18:07:36,075 DEBUG quick_adcp ------processor dictionary:------ __doc__ __init__ __module__ adcpcal aedit aflagit_setup as_cont as_nav as_vect asetup ashrot btcaluv catnav check_opts cleanup copy_ensfile ddtime def_qlist get_asvars get_cmd_timerange get_data2load_timerange get_filelist get_gyrodh get_headcorrstats get_lstblk_tr get_matcfgstr get_remaining_times get_time_range getmat ldcodas list2matcell llgrid loadens loadhdss loadlta loadping loaduh lst_btrk lst_conf lst_hdg lst_temp mpltest opts overlapping plotbtcal_mpl plothcorr_mpl plotnav_mpl plotrefl_mpl plottemp plottemp_mpl plotwtcal_mpl print_attlog putnav refabs refabsbt refplot refsm rotate rotated run_adcpsect run_applyedit run_calc run_calib run_editsetup run_findpflags run_getheadcorr run_getnav run_listblocks run_loaddata run_lstconfig run_lsttemp run_matfiles run_plotter run_putnav run_rawsetup run_refabs run_refplots run_refsm run_refsm_npy run_rotate run_scandata run_setflags run_smoothr run_updategbin run_xducerxy scanping scanraw setflags smoothr startmatlab timegrid timslip ubprint update_gbin user_defined_headfunc xducerxy zapsetup 2010-11-21 18:07:36,076 DEBUG quick_adcp progdir = /home/currents/programs 2010-11-21 18:07:36,076 DEBUG quick_adcp binos = lnx 2010-11-21 18:07:36,076 INFO quick_setup NOTE: proc_yearbase defaulting to yearbase. specify if different 2010-11-21 18:07:36,076 DEBUG quick_setup yearbase is 2010, proc_yearbase is 2010 2010-11-21 18:07:36,076 DEBUG quick_setup numpy calculations to run: refsm 2010-11-21 18:07:36,076 DEBUG quick_setup mplplots to run: temp, nav, refl, hcorr, wtcal, btcal 2010-11-21 18:07:36,076 DEBUG quick_setup processing data logged with uhdas: 2010-11-21 18:07:36,076 DEBUG quick_setup datatype is uhdas 2010-11-21 18:07:36,076 DEBUG quick_setup pingtype is bb 2010-11-21 18:07:36,077 DEBUG quick_setup instclass is wh 2010-11-21 18:07:36,077 DEBUG quick_setup no post-processing heading correction will be used 2010-11-21 18:07:36,077 DEBUG quick_setup transducer depth set in *_cfg.m file 2010-11-21 18:07:36,086 DEBUG quick_setup found (in edit/asetup.m): 2010-11-21 18:07:36,087 DEBUG quick_setup config.beamangle is 20 2010-11-21 18:07:36,087 DEBUG quick_subs matcfgstr is: % begin "matcfgstr" string, created by quick_adcp.py instclass = wh; instname = 'wh300'; pingtype = 'bb'; proc_yearbase = 2010; yearbase = 2010; cfg =get_uhdascfg('cfgbase' , 'EN488',... 'cfgpath' , '/home/data/EN488/proc/wh300/config',... 'instclass', instclass,... 'instname' , instname,... 'proc_yearbase', proc_yearbase,... 'yearbase', yearbase,... 'pingtype' , pingtype); gbindirbase = cfg.gbindirbase; allparams = cfg.allparams; % end "matcfgstr" string, created by quick_adcp.py 2010-11-21 18:07:36,087 DEBUG quick_setup ------- starting Matlab engine ------- 2010-11-21 18:07:36,087 DEBUG quick_setup ['/home/currents/programs/matlab'] 2010-11-21 18:07:36,090 DEBUG call_matlab starting to wait for initial prompt 2010-11-21 18:07:36,696 DEBUG call_matlab received initial prompt 2010-11-21 18:07:36,935 DEBUG quick_adcp cwd is /home/data/EN488/proc/wh300 about to run these steps:editsetup scandata loaddata setflags getnav get_headcorr rotate adcpsect refabs smoothnav putnav refplots find_pflags apply_edit navsteps lst_temp calib matfiles 2010-11-21 18:07:36,935 DEBUG quick_adcp original fix file is a_en.gps 2010-11-21 18:07:36,935 DEBUG quick_adcp smoothed nav file is a_en_refsm.asc 2010-11-21 18:07:36,935 DEBUG quick_asect extracting matlab files for wh300, bb pings 2010-11-21 18:07:36,937 DEBUG quick_subs found 3 files using wildcard expansion from "/home/data/EN488/raw/wh300/*.raw" 2010-11-21 18:07:36,937 DEBUG quick_adcp starting with data files (as seen from scan/ or load/ directory): /home/data/EN488/raw/wh300/en2010_324_56253.raw /home/data/EN488/raw/wh300/en2010_324_57600.raw /home/data/EN488/raw/wh300/en2010_324_64800.raw 2010-11-21 18:07:36,937 DEBUG quick_adcp LASTFILES invoked. using only 3 files from end of filelist 2010-11-21 18:07:36,937 DEBUG quick_adcp using delblks = 1 2010-11-21 18:07:36,937 DEBUG quick_adcp using data files (as seen from scan/ or load/ directory): /home/data/EN488/raw/wh300/en2010_324_56253.raw /home/data/EN488/raw/wh300/en2010_324_57600.raw /home/data/EN488/raw/wh300/en2010_324_64800.raw 2010-11-21 18:07:36,938 DEBUG quick_adcp Sun Nov 21 18:07:36 2010 running quick_adcp.py as follows: --cntfile /home/data/EN488/proc/wh300/wh300_qpy.cnt ----- adcpsect variables ------ afilebase a_en cbasename contour dbname a_en dbpath ../adcpdb deeper_boundaries [40, 60, 80, 100, 120] firstdepth 12 gridnum 80 increment 2 loaded_time_range all numbins 128 outdir . pgmin 50 prefix allbins_ proc_yearbase 2010 rl_endbin 20 rl_startbin 2 ss_string separate timegrid 60 vbasename vector ----- quick_adcp.py variables and current values ------ M acc_heading_cutoff 0.065 adjust_time 1 afilebase a_en allow_reload True auto True beamangle 20 bindir /home/currents/programs/codas3/bin/lnx binos lnx btrk_step 1 cfgbase EN488 cfgpath /home/data/EN488/proc/wh300/config cntfile /home/data/EN488/proc/wh300/wh300_qpy.cnt commands None cruisename EN488 data_def vmadcp.def datadir /home/data/EN488/raw/wh300 datafile_glob *.raw datatype uhdas dbname a_en dday_bailout None debug False delblks 1 diarystr %% no diary written %% displaystr set(0,'defaultfigureposition',[0 0 300 400]) set(0,'defaultfiguremenubar','none') set(0,'defaultfiguretoolbar','none') ducer_depth 0 editcfg_file override_editcfg enddday_file None ens_halign None ens_len 120 ensgyrorbin False expert None filelist ['/home/data/EN488/raw/wh300/en2010_324_56253.raw', '/home/data/EN488/raw/wh300/en2010_324_57600.raw', '/home/data/EN488/raw/wh300/en2010_324_64800.raw'] filter_hwidth 0.0208 find_pflags True firstdepth 12 fixfile a_en.gps hcorr_inst ashpaq2 head_func None help False hidedisplay True howto_lta False howto_ping False incremental False instclass wh instname wh300 jitter 15 lastfiles False matcfgstr % begin "matcfgstr" string, created by quick_adcp.py instclass = wh; instname = 'wh300'; pingtype = 'bb'; proc_yearbase = 2010; yearbase = 2010; cfg =get_uhdascfg('cfgbase' , 'EN488',... 'cfgpath' , '/home/data/EN488/proc/wh300/config',... 'instclass', instclass,... 'instname' , instname,... 'proc_yearbase', proc_yearbase,... 'yearbase', yearbase,... 'pingtype' , pingtype); gbindirbase = cfg.gbindirbase; allparams = cfg.allparams; % end "matcfgstr" string, created by quick_adcp.py max_BLKprofiles 399 maxrunsecs None min_filter_fraction 0.5 mplplots ['temp', 'nav', 'refl', 'hcorr', 'wtcal', 'btcal'] nosave_editcfg 0 npycalc ['refsm'] num_persistence 24 numbins 128 orig_fixfile a_en.gps overview False pgmin 50 ping_headcorr True pingtype bb post_headcorr False printformats png proc_yearbase 2010 procdir wh300 progdir /home/currents/programs quiet True rawstd_cutoff None rl_endbin 20 rl_startbin 2 rotate_amplitude 1 rotate_angle 0 rotate_file None save_editcfg 1 save_lastens 0 scanfilelist ['/home/data/EN488/raw/wh300/en2010_324_56253.raw', '/home/data/EN488/raw/wh300/en2010_324_57600.raw', '/home/data/EN488/raw/wh300/en2010_324_64800.raw'] setup_info False skip_avg True smfile a_en_refsm.asc steps2rerun time_angle_base ens_hcorr time_angle_file ens_hcorr.ang timeout_secs 86400 tips False tktail False top_plotbin 1 ub_type 1920 update_gbin False use_refsm True use_smoothr False use_topo4edit True vardoc False varvals False wtrk_step 7 xducer_dx False xducer_dy False yearbase 2010 configured to run the following steps: editsetup scandata loaddata setflags getnav get_headcorr rotate adcpsect refabs smoothnav putnav refplots find_pflags apply_edit navsteps lst_temp calib matfiles 2010-11-21 18:07:36,938 DEBUG quick_run ------------ step 1: scan data (create .scn file) ------------- 2010-11-21 18:07:36,938 DEBUG quick_run scanning files for time ranges... 2010-11-21 18:07:36,938 DEBUG quick_setup starting in /home/data/EN488/proc/wh300/scan 2010-11-21 18:07:36,938 DEBUG quick_setup executing commands from /home/data/EN488/proc/wh300/scan 2010-11-21 18:07:36,939 DEBUG quick_setup running python command "scanraw" 2010-11-21 18:07:36,939 DEBUG call_matlab --> clear all 2010-11-21 18:07:36,943 DEBUG call_matlab <-- >> 2010-11-21 18:07:36,943 DEBUG call_matlab --> close all 2010-11-21 18:07:36,957 DEBUG call_matlab <-- >> 2010-11-21 18:07:36,957 DEBUG call_matlab --> cd /home/data/EN488/proc/wh300/scan 2010-11-21 18:07:36,959 DEBUG call_matlab <-- >> 2010-11-21 18:07:36,959 DEBUG call_matlab --> scan_tmp 2010-11-21 18:07:37,482 DEBUG call_matlab <-- getting config files from "/home/data/EN488/proc/wh300/config" running "EN488_cfg.m" running "EN488_proc.m" writing scan info to a_en.scn >> 2010-11-21 18:07:37,482 DEBUG quick_run writing time range from a_en.scn to a_en.tr 2010-11-21 18:07:37,482 DEBUG quick_run getting scan time range 2010-11-21 18:07:37,482 DEBUG quick_setup starting in /home/data/EN488/proc/wh300 2010-11-21 18:07:37,482 DEBUG quick_setup executing commands from /home/data/EN488/proc/wh300/scan 2010-11-21 18:07:37,482 DEBUG quick_setup running python command "get_time_range" 2010-11-21 18:07:37,482 DEBUG quick_subs about to set opts to proc.opts, in get_time_range... 2010-11-21 18:07:37,483 DEBUG quick_subs extracting time range 2010-11-21 18:07:37,484 DEBUG quick_subs start_end_time 2010/11/21 15:37:35 to 2010/11/21 18:06:20 2010-11-21 18:07:37,484 DEBUG quick_subs dd0: 324.651100 dd1: 324.754398 2010-11-21 18:07:37,484 DEBUG quick_adcp in quick_adcp.py: after scan, about to look for database timesin /home/data/EN488/proc/wh300 2010-11-21 18:07:37,484 DEBUG quick_adcp looking for database with adcpdb/a_en*.blk 2010-11-21 18:07:37,484 DEBUG quick_adcp database found: listing blocks 2010-11-21 18:07:37,485 DEBUG quick_subs removing a_endir.blk 2010-11-21 18:07:37,485 DEBUG quick_subs about to run mkblkdir 2010-11-21 18:07:37,485 DEBUG quick_subs database still exists; rerunning mkdirblk 2010-11-21 18:07:37,485 DEBUG quick_subs running /home/currents/programs/codas3/bin/lnx/mkblkdir mkblkdir.tmp 2010-11-21 18:07:37,492 DEBUG quick_subs database passes. 2010-11-21 18:07:37,493 DEBUG quick_subs writing time range from a_en.lst to a_en.tr 2010-11-21 18:07:37,493 DEBUG quick_setup starting in /home/data/EN488/proc/wh300 2010-11-21 18:07:37,493 DEBUG quick_setup executing commands from /home/data/EN488/proc/wh300/adcpdb 2010-11-21 18:07:37,493 DEBUG quick_setup running python command "get_time_range" 2010-11-21 18:07:37,493 DEBUG quick_subs about to set opts to proc.opts, in get_time_range... 2010-11-21 18:07:37,493 DEBUG quick_subs extracting time range 2010-11-21 18:07:37,493 DEBUG quick_subs start_end_time 2010/11/21 15:39:36 to 2010/11/21 17:36:00 2010-11-21 18:07:37,493 DEBUG quick_subs dd0: 324.652500 dd1: 324.733333 2010-11-21 18:07:37,494 DEBUG quick_subs writing time range from a_en.lst to a_en.tr 2010-11-21 18:07:37,494 DEBUG quick_setup starting in /home/data/EN488/proc/wh300 2010-11-21 18:07:37,494 DEBUG quick_setup executing commands from /home/data/EN488/proc/wh300/adcpdb 2010-11-21 18:07:37,494 DEBUG quick_setup running python command "get_time_range" 2010-11-21 18:07:37,494 DEBUG quick_subs about to set opts to proc.opts, in get_time_range... 2010-11-21 18:07:37,494 DEBUG quick_subs extracting time range 2010-11-21 18:07:37,494 DEBUG quick_subs start_end_time 2010/11/21 15:39:36 to 2010/11/21 17:36:00 2010-11-21 18:07:37,494 DEBUG quick_subs dd0: 324.652500 dd1: 324.733333 2010-11-21 18:07:37,495 DEBUG quick_adcp in quick_adcp.py: before load, just looked for database times 2010-11-21 18:07:37,495 DEBUG quick_adcp origdb_time_range is 2010/11/21 15:39:36 to 2010/11/21 17:36:00 2010-11-21 18:07:37,495 DEBUG quick_adcp (324.652500 to 324.733333) 2010-11-21 18:07:37,495 DEBUG quick_run ------------ step 2: load data into codas database ------------- 2010-11-21 18:07:37,495 DEBUG quick_subs getting current (remaining after deletion) database times 2010-11-21 18:07:37,495 DEBUG quick_subs ['adcpdb/a_endir.blk', 'adcpdb/a_en001.blk'] 2010-11-21 18:07:37,495 DEBUG quick_subs length is 2 2010-11-21 18:07:37,495 DEBUG quick_subs removing a_endir.blk 2010-11-21 18:07:37,496 DEBUG quick_subs about to run mkblkdir 2010-11-21 18:07:37,496 DEBUG quick_subs database still exists; rerunning mkdirblk 2010-11-21 18:07:37,496 DEBUG quick_subs running /home/currents/programs/codas3/bin/lnx/mkblkdir mkblkdir.tmp 2010-11-21 18:07:37,502 DEBUG quick_subs database passes. 2010-11-21 18:07:37,502 DEBUG quick_subs writing time range from a_en.lst to a_en.tr 2010-11-21 18:07:37,502 DEBUG quick_setup starting in /home/data/EN488/proc/wh300 2010-11-21 18:07:37,502 DEBUG quick_setup executing commands from /home/data/EN488/proc/wh300/adcpdb 2010-11-21 18:07:37,503 DEBUG quick_setup running python command "get_time_range" 2010-11-21 18:07:37,503 DEBUG quick_subs about to set opts to proc.opts, in get_time_range... 2010-11-21 18:07:37,503 DEBUG quick_subs extracting time range 2010-11-21 18:07:37,503 DEBUG quick_subs start_end_time 2010/11/21 15:39:36 to 2010/11/21 17:36:00 2010-11-21 18:07:37,503 DEBUG quick_subs dd0: 324.652500 dd1: 324.733333 2010-11-21 18:07:37,503 DEBUG quick_subs about to set opts to proc.opts, in get_time_range... 2010-11-21 18:07:37,503 DEBUG quick_subs reading time range 2010-11-21 18:07:37,504 DEBUG quick_subs start_end_time 2010/11/21 15:39:36 to 2010/11/21 17:36:00 2010-11-21 18:07:37,504 DEBUG quick_subs dd0: 324.652500 dd1: 324.733333 2010-11-21 18:07:37,504 INFO quick_subs Sun Nov 21 18:07:37 2010 2010-11-21 18:07:37,504 INFO quick_subs checking database time range by listblk 2010-11-21 18:07:37,504 DEBUG quick_subs removing a_endir.blk 2010-11-21 18:07:37,504 DEBUG quick_subs about to run mkblkdir 2010-11-21 18:07:37,504 DEBUG quick_subs database still exists; rerunning mkdirblk 2010-11-21 18:07:37,504 DEBUG quick_subs running /home/currents/programs/codas3/bin/lnx/mkblkdir mkblkdir.tmp 2010-11-21 18:07:37,511 DEBUG quick_subs database passes. 2010-11-21 18:07:37,511 DEBUG quick_subs writing time range from a_en.lst to a_en.tr 2010-11-21 18:07:37,511 DEBUG quick_setup starting in /home/data/EN488/proc/wh300 2010-11-21 18:07:37,511 DEBUG quick_setup executing commands from /home/data/EN488/proc/wh300/adcpdb 2010-11-21 18:07:37,511 DEBUG quick_setup running python command "get_time_range" 2010-11-21 18:07:37,511 DEBUG quick_subs about to set opts to proc.opts, in get_time_range... 2010-11-21 18:07:37,511 DEBUG quick_subs extracting time range 2010-11-21 18:07:37,512 DEBUG quick_subs start_end_time 2010/11/21 15:39:36 to 2010/11/21 17:36:00 2010-11-21 18:07:37,512 DEBUG quick_subs dd0: 324.652500 dd1: 324.733333 2010-11-21 18:07:37,513 INFO quick_subs found line /* 0 n= 59 a_en001.blk */ 2010/11/21 15:39:36 to 2010/11/21 17:36:00 2010-11-21 18:07:37,513 INFO quick_subs scan data start at 324.6510995 2010-11-21 18:07:37,513 INFO quick_subs scan time range: 2010/11/21 15:37:35 to 2010/11/21 18:06:20 2010-11-21 18:07:37,513 INFO quick_subs codasdb ends at 324.7333333 (2010/11/21 17:36:00) 2010-11-21 18:07:37,513 DEBUG quick_subs ... changed dirs, in /home/data/EN488/proc/wh300/adcpdb 2010-11-21 18:07:37,513 DEBUG quick_subs deleting these files: ['a_en001.blk'] 2010-11-21 18:07:37,514 DEBUG quick_subs getting current (remaining after deletion) database times 2010-11-21 18:07:37,514 DEBUG quick_subs [] 2010-11-21 18:07:37,514 DEBUG quick_subs length is 0 2010-11-21 18:07:37,514 DEBUG quick_subs codas database currently goes from 1970/01/01 01:00:00 to 1970/01/01 01:01:01 2010-11-21 18:07:37,514 DEBUG quick_subs (-10000.000000 to -10001.000000) 2010-11-21 18:07:37,514 DEBUG quick_subs 2010-11-21 18:07:37,515 DEBUG quick_subs found existing ens_blk files: 001 2010-11-21 18:07:37,515 DEBUG quick_subs checked: loaded blkstrs: [] 2010-11-21 18:07:37,515 DEBUG quick_subs checked: unloaded blkstrs: ['001'] 2010-11-21 18:07:37,515 DEBUG quick_subs first unloaded file is load/ens_blk001.cmd 2010-11-21 18:07:37,515 DEBUG quick_subs data goes from 2010/11/21 15:39:36 to 2010/11/21 18:06:20 2010-11-21 18:07:37,516 DEBUG quick_subs (324.652500 to 324.754398) 2010-11-21 18:07:37,516 DEBUG quick_run using data files (as seen from scan/ or load/ directory): /home/data/EN488/raw/wh300/en2010_324_56253.raw /home/data/EN488/raw/wh300/en2010_324_57600.raw /home/data/EN488/raw/wh300/en2010_324_64800.raw 2010-11-21 18:07:37,516 INFO quick_run Sun Nov 21 18:07:37 2010 2010-11-21 18:07:37,516 INFO quick_run about to load uhdas files 2010-11-21 18:07:37,516 INFO quick_run /home/data/EN488/raw/wh300/en2010_324_56253.raw /home/data/EN488/raw/wh300/en2010_324_57600.raw /home/data/EN488/raw/wh300/en2010_324_64800.raw 2010-11-21 18:07:37,516 DEBUG quick_setup load/ldcodas.tmp exists 2010-11-21 18:07:37,516 DEBUG quick_setup starting in /home/data/EN488/proc/wh300 2010-11-21 18:07:37,516 DEBUG quick_setup executing commands from /home/data/EN488/proc/wh300/load 2010-11-21 18:07:37,516 DEBUG quick_setup running python command "ldcodas" 2010-11-21 18:07:37,516 DEBUG quick_subs in /home/data/EN488/proc/wh300/load 2010-11-21 18:07:37,517 DEBUG quick_subs found block strings: [] 2010-11-21 18:07:37,517 DEBUG quick_subs found cmd blk strings: ['001'] 2010-11-21 18:07:37,517 DEBUG quick_subs starttime is 2010/11/21 15:39:36 2010-11-21 18:07:37,517 DEBUG quick_subs RESETTING thisload_time_range 2010-11-21 18:07:37,517 DEBUG quick_subs time range of data to be loaded: 2010/11/21 15:39:36 to 2010/11/21 18:06:20 2010-11-21 18:07:37,517 DEBUG quick_subs data startdd 324.652500 data enddd 324.754398 2010-11-21 18:07:37,517 DEBUG quick_subs about to load from these cmd files ['ens_blk001.cmd'] 2010-11-21 18:07:37,518 DEBUG quick_subs DATABASE_NAME: ../adcpdb/a_en DEFINITION_FILE: vmadcp.def LOG_FILE: load.log YEAR_BASE: 2010 cmd_file_list /* use only if specifying cmd paths, not "@" */ END ./ens_blk001.cmd 2010-11-21 18:07:37,518 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx/ldcodas ldcodas.tmp 2010-11-21 18:07:37,536 DEBUG quick_subs removing a_endir.blk 2010-11-21 18:07:37,537 DEBUG quick_subs about to run mkblkdir 2010-11-21 18:07:37,537 DEBUG quick_subs database still exists; rerunning mkdirblk 2010-11-21 18:07:37,537 DEBUG quick_subs running /home/currents/programs/codas3/bin/lnx/mkblkdir mkblkdir.tmp 2010-11-21 18:07:37,543 DEBUG quick_subs database passes. 2010-11-21 18:07:37,543 DEBUG quick_subs writing time range from a_en.lst to a_en.tr 2010-11-21 18:07:37,543 DEBUG quick_setup starting in /home/data/EN488/proc/wh300 2010-11-21 18:07:37,544 DEBUG quick_setup executing commands from /home/data/EN488/proc/wh300/adcpdb 2010-11-21 18:07:37,544 DEBUG quick_setup running python command "get_time_range" 2010-11-21 18:07:37,544 DEBUG quick_subs about to set opts to proc.opts, in get_time_range... 2010-11-21 18:07:37,544 DEBUG quick_subs extracting time range 2010-11-21 18:07:37,544 DEBUG quick_subs start_end_time 2010/11/21 15:39:36 to 2010/11/21 18:06:04 2010-11-21 18:07:37,544 DEBUG quick_subs dd0: 324.652500 dd1: 324.754213 2010-11-21 18:07:37,544 DEBUG quick_subs writing time range from a_en.lst to a_en.tr 2010-11-21 18:07:37,544 DEBUG quick_setup starting in /home/data/EN488/proc/wh300 2010-11-21 18:07:37,545 DEBUG quick_setup executing commands from /home/data/EN488/proc/wh300/adcpdb 2010-11-21 18:07:37,545 DEBUG quick_setup running python command "get_time_range" 2010-11-21 18:07:37,545 DEBUG quick_subs about to set opts to proc.opts, in get_time_range... 2010-11-21 18:07:37,545 DEBUG quick_subs extracting time range 2010-11-21 18:07:37,545 DEBUG quick_subs start_end_time 2010/11/21 15:39:36 to 2010/11/21 18:06:04 2010-11-21 18:07:37,545 DEBUG quick_subs dd0: 324.652500 dd1: 324.754213 2010-11-21 18:07:37,545 DEBUG quick_adcp loaded_time_range is 2010/11/21 15:39:36 to 2010/11/21 18:06:04 2010-11-21 18:07:37,545 DEBUG quick_adcp (324.652500 to 324.754213) 2010-11-21 18:07:37,546 DEBUG quick_setup starting in /home/data/EN488/proc/wh300 2010-11-21 18:07:37,546 DEBUG quick_setup executing commands from /home/data/EN488/proc/wh300/adcpdb 2010-11-21 18:07:37,546 DEBUG quick_setup running python command "lst_conf" 2010-11-21 18:07:37,546 DEBUG quick_subs dbname: a_en output: a_en.cnh time_ranges: all 2010-11-21 18:07:37,546 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx/lst_conf lst_conf.tmp 2010-11-21 18:07:37,550 DEBUG quick_run ------------ step 3 (create suitable setup files for editing) ------------- 2010-11-21 18:07:37,550 DEBUG quick_run executing commands from /home/data/EN488/proc/wh300/edit 2010-11-21 18:07:37,550 DEBUG quick_run setup.m exists. not replacing 2010-11-21 18:07:37,551 DEBUG quick_run asetup.m exists. not replacing 2010-11-21 18:07:37,551 DEBUG quick_run aflagit_setup.m exists. not replacing 2010-11-21 18:07:37,551 DEBUG quick_run ------------ step 4: run setflags ------------- 2010-11-21 18:07:37,551 DEBUG quick_setup starting in /home/data/EN488/proc/wh300 2010-11-21 18:07:37,551 DEBUG quick_setup executing commands from /home/data/EN488/proc/wh300/edit 2010-11-21 18:07:37,551 DEBUG quick_setup running python command "setflags" 2010-11-21 18:07:37,551 DEBUG quick_subs dbname: ../adcpdb/a_en pg_min: 50 set_range_bit time_ranges: all 2010-11-21 18:07:37,551 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx/setflags setflags.tmp 2010-11-21 18:07:37,556 DEBUG quick_run ------------ step 5: get fixes from load/*.gps2 files ------------- 2010-11-21 18:07:37,556 DEBUG quick_setup starting in /home/data/EN488/proc/wh300 2010-11-21 18:07:37,556 DEBUG quick_setup executing commands from /home/data/EN488/proc/wh300/nav 2010-11-21 18:07:37,556 DEBUG quick_setup running python command "catnav" 2010-11-21 18:07:37,557 DEBUG quick_run ------------ step 6: get heading correction (if applicable) ------------- 2010-11-21 18:07:37,557 DEBUG quick_run hcorr_inst is ashpaq2 2010-11-21 18:07:37,557 DEBUG quick_setup cal/rotate/lst_hdg.tmp exists 2010-11-21 18:07:37,557 DEBUG quick_setup starting in /home/data/EN488/proc/wh300 2010-11-21 18:07:37,557 DEBUG quick_setup executing commands from /home/data/EN488/proc/wh300/cal/rotate 2010-11-21 18:07:37,557 DEBUG quick_setup running python command "lst_hdg" 2010-11-21 18:07:37,557 DEBUG quick_subs dbname: ../../adcpdb/a_en output: scn.hdg step_size= 1 year_base= 2010 time_ranges: all 2010-11-21 18:07:37,558 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx/lst_hdg lst_hdg.tmp 2010-11-21 18:07:37,562 DEBUG quick_run no available heading correction function specified 2010-11-21 18:07:37,562 DEBUG quick_run ------------ step 7: rotate ------------- 2010-11-21 18:07:37,562 DEBUG quick_setup starting in /home/data/EN488/proc/wh300 2010-11-21 18:07:37,562 DEBUG quick_setup executing commands from /home/data/EN488/proc/wh300/cal/rotate 2010-11-21 18:07:37,562 DEBUG quick_setup running python command "rotated" 2010-11-21 18:07:37,563 DEBUG quick_subs last rotated time from log file: 2010/11/21 17:36:15 2010-11-21 18:07:37,563 DEBUG quick_subs time range of currently loaded data: 2010/11/21 15:39:36 to 2010/11/21 18:06:04 2010-11-21 18:07:37,563 DEBUG quick_subs (324.652500 to 324.754213) 2010-11-21 18:07:37,563 DEBUG quick_setup cal/rotate/rotate.tmp exists 2010-11-21 18:07:37,563 DEBUG quick_setup starting in /home/data/EN488/proc/wh300 2010-11-21 18:07:37,563 DEBUG quick_setup executing commands from /home/data/EN488/proc/wh300/cal/rotate 2010-11-21 18:07:37,564 DEBUG quick_setup running python command "rotate" 2010-11-21 18:07:37,564 DEBUG quick_subs DB_NAME: ../../adcpdb/a_en LOG_FILE: rotate.log TIME_RANGE: 2010/11/21 15:39:36 to 2010/11/21 18:06:20 /* only from scanned files */ OPTION_LIST: water_and_bottom_track: year_base= 2010 /* time_angle_file: (NOT USED -- rotation is done in ensembles) */ amplitude= 1 angle_0= 0 end end 2010-11-21 18:07:37,564 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx/rotate rotate.tmp 2010-11-21 18:07:37,569 DEBUG quick_run ------------ step 8: run adcpsect (for calib) ------------- 2010-11-21 18:07:37,569 DEBUG quick_setup nav/as_nav.tmp exists 2010-11-21 18:07:37,569 DEBUG quick_setup starting in /home/data/EN488/proc/wh300 2010-11-21 18:07:37,569 DEBUG quick_setup executing commands from /home/data/EN488/proc/wh300/nav 2010-11-21 18:07:37,569 DEBUG quick_setup running python command "as_nav" 2010-11-21 18:07:37,569 DEBUG quick_subs dbname: ../adcpdb/a_en output: a_en step_size: 1 ndepth: 20 time_ranges: separate year_base= 2010 option_list: pg_min= 50 navigation: reference_bins 2 to 20 end statistics: mean units= 0.01 /* cm/s instead of default m/s */ end flag_mask: ALL_BITS end end 2010/11/21 15:39:36 to 2010/11/21 18:06:04 /* the whole time range */ 2010-11-21 18:07:37,569 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx/adcpsect as_nav.tmp 2010-11-21 18:07:37,575 DEBUG quick_run ------------ step 9: run refabs (for calib) ------------- 2010-11-21 18:07:37,575 DEBUG quick_setup starting in /home/data/EN488/proc/wh300 2010-11-21 18:07:37,575 DEBUG quick_setup executing commands from /home/data/EN488/proc/wh300/nav 2010-11-21 18:07:37,575 DEBUG quick_setup running python command "refabs" 2010-11-21 18:07:37,576 DEBUG quick_subs fix_file_type: simple reference_file: a_en.nav fix_file: a_en.gps output: a_en.ref year_base= 2010 ensemble_length= 120 gap_tolerance= 10 2010-11-21 18:07:37,576 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx/refabs refabs.tmp 2010-11-21 18:07:37,580 DEBUG quick_run ------------ step 10: get smoothed navigation (for calib) ------------- 2010-11-21 18:07:37,580 DEBUG quick_setup nav/smoothr.tmp exists 2010-11-21 18:07:37,580 DEBUG quick_setup starting in /home/data/EN488/proc/wh300 2010-11-21 18:07:37,581 DEBUG quick_setup executing commands from /home/data/EN488/proc/wh300/nav 2010-11-21 18:07:37,581 DEBUG quick_setup running python command "smoothr" 2010-11-21 18:07:37,581 DEBUG quick_subs reference_file: a_en.nav refabs_output: a_en.ref output: a_en.sm filter_hwidth= 0.0208 min_filter_fraction= 0.5 max_gap_ratio= 0.05 max_gap_distance= 50 max_gap_time= 30 /* 0.5 minutes */ ensemble_time= 120 max_speed= 5.0 min_speed= 1.0 iterations= 5 fix_to_dr_limit= 0.00050 2010-11-21 18:07:37,581 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx/smoothr smoothr.tmp 2010-11-21 18:07:37,590 DEBUG quick_adcp about to run numpy refsm 2010-11-21 18:07:37,590 DEBUG quick_npy Starting: refsm 2010-11-21 18:07:37,599 INFO nav dtmin = -0.50 dtmax = 0.49 2010-11-21 18:07:37,643 DEBUG quick_npy Ending: refsm 2010-11-21 18:07:37,643 DEBUG quick_run ------------ step 11: put smoothed navigation back into database ------------- 2010-11-21 18:07:37,643 DEBUG quick_setup nav/putnav.tmp exists 2010-11-21 18:07:37,643 DEBUG quick_setup starting in /home/data/EN488/proc/wh300 2010-11-21 18:07:37,643 DEBUG quick_setup executing commands from /home/data/EN488/proc/wh300/nav 2010-11-21 18:07:37,643 DEBUG quick_setup running python command "putnav" 2010-11-21 18:07:37,643 DEBUG quick_subs dbname: ../adcpdb/a_en position_file: a_en_refsm.asc year_base= 2010 tolerance= 5 navigation_sources: gps end 2010-11-21 18:07:37,643 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx/putnav putnav.tmp 2010-11-21 18:07:37,649 DEBUG quick_adcp plotting navigation 2010-11-21 18:07:37,649 DEBUG quick_mpl Starting plot: nav 2010-11-21 18:07:37,959 DEBUG quick_mpl Ending plot: nav 2010-11-21 18:07:37,959 DEBUG quick_mpl Starting plot: refl 2010-11-21 18:07:37,963 DEBUG quick_mplplots found 0.098928 days of data 2010-11-21 18:07:37,964 DEBUG quick_mplplots start day is 324.000000 2010-11-21 18:07:37,964 DEBUG quick_mplplots figures with 2.000000 days per page 2010-11-21 18:07:37,964 DEBUG quick_mplplots printing 1 pages 2010-11-21 18:07:37,964 DEBUG quick_mplplots yrange will be [1.000000, 1.000000] 2010-11-21 18:07:37,964 INFO quick_mplplots startdd is 324.0 2010-11-21 18:07:37,964 INFO quick_mplplots dt is 2.0 2010-11-21 18:07:38,317 DEBUG quick_mpl Ending plot: refl 2010-11-21 18:07:38,317 DEBUG quick_run ------------ step 13: automatically find profile flags ------------- 2010-11-21 18:07:38,317 DEBUG quick_run find profile flags ------------ *** ------------- 2010-11-21 18:07:38,318 DEBUG quick_setup starting in /home/data/EN488/proc/wh300 2010-11-21 18:07:38,318 DEBUG quick_setup executing commands from /home/data/EN488/proc/wh300/edit 2010-11-21 18:07:38,318 DEBUG quick_setup running python command "aedit" 2010-11-21 18:07:39,523 DEBUG quick_run ------------ step 14: apply all profile flags to database ------------- 2010-11-21 18:07:39,523 DEBUG quick_run starting in: /home/data/EN488/proc/wh300 2010-11-21 18:07:39,523 DEBUG quick_run executing commands from: edit 2010-11-21 18:07:39,525 DEBUG quick_run about to run /home/currents/programs/codas3/bin/lnx/dbupdate ../adcpdb/a_en abottom_tmp.asc 2010-11-21 18:07:39,530 DEBUG quick_run about to run /home/currents/programs/codas3/bin/lnx/dbupdate ../adcpdb/a_en abadprf_tmp.asc 2010-11-21 18:07:39,534 DEBUG quick_run about to run /home/currents/programs/codas3/bin/lnx/badbin ../adcpdb/a_en abadbin_tmp.asc 2010-11-21 18:07:39,539 DEBUG quick_run about to run /home/currents/programs/codas3/bin/lnx/set_lgb ../adcpdb/a_en 20 2010-11-21 18:07:39,544 DEBUG quick_run about to run /home/currents/programs/codas3/bin/lnx/setflags setflags.tmp 2010-11-21 18:07:39,549 DEBUG quick_run changing directories back to /home/data/EN488/proc/wh300 2010-11-21 18:07:39,549 DEBUG quick_adcp ------------ step 15: rerun nav steps, redo reflayer plots ------------- 2010-11-21 18:07:39,549 DEBUG quick_run ------------ step 8: run adcpsect (for calib) ------------- 2010-11-21 18:07:39,549 DEBUG quick_setup nav/as_nav.tmp exists 2010-11-21 18:07:39,549 DEBUG quick_setup starting in /home/data/EN488/proc/wh300 2010-11-21 18:07:39,550 DEBUG quick_setup executing commands from /home/data/EN488/proc/wh300/nav 2010-11-21 18:07:39,550 DEBUG quick_setup running python command "as_nav" 2010-11-21 18:07:39,550 DEBUG quick_subs dbname: ../adcpdb/a_en output: a_en step_size: 1 ndepth: 20 time_ranges: separate year_base= 2010 option_list: pg_min= 50 navigation: reference_bins 2 to 20 end statistics: mean units= 0.01 /* cm/s instead of default m/s */ end flag_mask: ALL_BITS end end 2010/11/21 15:39:36 to 2010/11/21 18:06:04 /* the whole time range */ 2010-11-21 18:07:39,550 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx/adcpsect as_nav.tmp 2010-11-21 18:07:39,556 DEBUG quick_run ------------ step 9: run refabs (for calib) ------------- 2010-11-21 18:07:39,556 DEBUG quick_setup starting in /home/data/EN488/proc/wh300 2010-11-21 18:07:39,556 DEBUG quick_setup executing commands from /home/data/EN488/proc/wh300/nav 2010-11-21 18:07:39,556 DEBUG quick_setup running python command "refabs" 2010-11-21 18:07:39,556 DEBUG quick_subs fix_file_type: simple reference_file: a_en.nav fix_file: a_en.gps output: a_en.ref year_base= 2010 ensemble_length= 120 gap_tolerance= 10 2010-11-21 18:07:39,557 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx/refabs refabs.tmp 2010-11-21 18:07:39,562 DEBUG quick_run ------------ step 10: get smoothed navigation (for calib) ------------- 2010-11-21 18:07:39,562 DEBUG quick_setup nav/smoothr.tmp exists 2010-11-21 18:07:39,562 DEBUG quick_setup starting in /home/data/EN488/proc/wh300 2010-11-21 18:07:39,562 DEBUG quick_setup executing commands from /home/data/EN488/proc/wh300/nav 2010-11-21 18:07:39,563 DEBUG quick_setup running python command "smoothr" 2010-11-21 18:07:39,563 DEBUG quick_subs reference_file: a_en.nav refabs_output: a_en.ref output: a_en.sm filter_hwidth= 0.0208 min_filter_fraction= 0.5 max_gap_ratio= 0.05 max_gap_distance= 50 max_gap_time= 30 /* 0.5 minutes */ ensemble_time= 120 max_speed= 5.0 min_speed= 1.0 iterations= 5 fix_to_dr_limit= 0.00050 2010-11-21 18:07:39,563 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx/smoothr smoothr.tmp 2010-11-21 18:07:39,572 DEBUG quick_adcp running refsm 2010-11-21 18:07:39,573 DEBUG quick_npy Starting: refsm 2010-11-21 18:07:39,582 INFO nav dtmin = -0.50 dtmax = 0.49 2010-11-21 18:07:39,594 DEBUG quick_npy Ending: refsm 2010-11-21 18:07:39,594 DEBUG quick_run ------------ step 11: put smoothed navigation back into database ------------- 2010-11-21 18:07:39,594 DEBUG quick_setup nav/putnav.tmp exists 2010-11-21 18:07:39,594 DEBUG quick_setup starting in /home/data/EN488/proc/wh300 2010-11-21 18:07:39,594 DEBUG quick_setup executing commands from /home/data/EN488/proc/wh300/nav 2010-11-21 18:07:39,595 DEBUG quick_setup running python command "putnav" 2010-11-21 18:07:39,595 DEBUG quick_subs dbname: ../adcpdb/a_en position_file: a_en_refsm.asc year_base= 2010 tolerance= 5 navigation_sources: gps end 2010-11-21 18:07:39,595 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx/putnav putnav.tmp 2010-11-21 18:07:39,601 DEBUG quick_mpl Starting plot: nav 2010-11-21 18:07:39,922 DEBUG quick_mpl Ending plot: nav 2010-11-21 18:07:39,923 DEBUG quick_mpl Starting plot: refl 2010-11-21 18:07:39,927 DEBUG quick_mplplots found 0.098928 days of data 2010-11-21 18:07:39,927 DEBUG quick_mplplots start day is 324.000000 2010-11-21 18:07:39,927 DEBUG quick_mplplots figures with 2.000000 days per page 2010-11-21 18:07:39,927 DEBUG quick_mplplots printing 1 pages 2010-11-21 18:07:39,927 DEBUG quick_mplplots yrange will be [1.000000, 1.000000] 2010-11-21 18:07:39,927 INFO quick_mplplots startdd is 324.0 2010-11-21 18:07:39,927 INFO quick_mplplots dt is 2.0 2010-11-21 18:07:40,269 DEBUG quick_mpl Ending plot: refl 2010-11-21 18:07:40,269 DEBUG quick_run ------------ step 16: list temperature and plot it ------------- 2010-11-21 18:07:40,269 DEBUG quick_setup edit/lst_temp.tmp exists 2010-11-21 18:07:40,270 DEBUG quick_setup starting in /home/data/EN488/proc/wh300 2010-11-21 18:07:40,270 DEBUG quick_setup executing commands from /home/data/EN488/proc/wh300/edit 2010-11-21 18:07:40,270 DEBUG quick_setup running python command "lst_temp" 2010-11-21 18:07:40,270 DEBUG quick_subs dbname: ../adcpdb/a_en output: a_en.tem step_size= 1 year_base= 2010 time_ranges: all 2010-11-21 18:07:40,270 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx/lst_temp lst_temp.tmp 2010-11-21 18:07:40,275 DEBUG quick_mpl Starting plot: temp 2010-11-21 18:07:40,278 DEBUG quick_mplplots plotting 74 points 2010-11-21 18:07:40,513 DEBUG quick_mpl Ending plot: temp 2010-11-21 18:07:40,513 DEBUG quick_run ------------ step 17: bottom track and watertrack calibrations ------------- 2010-11-21 18:07:40,513 DEBUG quick_setup cal/botmtrk/lst_btrk.tmp exists 2010-11-21 18:07:40,513 DEBUG quick_setup starting in /home/data/EN488/proc/wh300 2010-11-21 18:07:40,513 DEBUG quick_setup executing commands from /home/data/EN488/proc/wh300/cal/botmtrk 2010-11-21 18:07:40,513 DEBUG quick_setup running python command "lst_btrk" 2010-11-21 18:07:40,514 DEBUG quick_subs dbname: ../../adcpdb/a_en output: a_en.btm step_size= 1 year_base= 2010 time_ranges: 2010/11/21 15:39:36 to 2010/11/21 18:06:04 /* whole time range */ 2010-11-21 18:07:40,514 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx/lst_btrk lst_btrk.tmp 2010-11-21 18:07:40,518 DEBUG quick_setup cal/botmtrk/refabsbt.tmp exists 2010-11-21 18:07:40,519 DEBUG quick_setup starting in /home/data/EN488/proc/wh300 2010-11-21 18:07:40,519 DEBUG quick_setup executing commands from /home/data/EN488/proc/wh300/cal/botmtrk 2010-11-21 18:07:40,519 DEBUG quick_setup running python command "refabsbt" 2010-11-21 18:07:40,519 DEBUG quick_subs fix_file_type: simple reference_file: a_en.btm fix_file: ../../nav/a_en.gps output: a_en.ref year_base= 2010 ensemble_length= 120 gap_tolerance= 60 2010-11-21 18:07:40,519 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx/refabsbt refabsbt.tmp 2010-11-21 18:07:40,523 DEBUG quick_mpl Starting plot: btcal 2010-11-21 18:07:40,524 DEBUG quick_mplplots No data in a_en.btm 2010-11-21 18:07:40,524 DEBUG quick_mplplots Returning from Btplot with no output 2010-11-21 18:07:40,524 DEBUG quick_mpl Ending plot: btcal 2010-11-21 18:07:40,524 DEBUG quick_setup nav/as_nav.tmp exists 2010-11-21 18:07:40,524 DEBUG quick_setup starting in /home/data/EN488/proc/wh300 2010-11-21 18:07:40,524 DEBUG quick_setup executing commands from /home/data/EN488/proc/wh300/nav 2010-11-21 18:07:40,525 DEBUG quick_setup running python command "as_nav" 2010-11-21 18:07:40,525 DEBUG quick_subs dbname: ../adcpdb/a_en output: a_en step_size: 1 ndepth: 20 time_ranges: separate year_base= 2010 option_list: pg_min= 50 navigation: reference_bins 2 to 20 end statistics: mean units= 0.01 /* cm/s instead of default m/s */ end flag_mask: ALL_BITS end end 2010/11/21 15:39:36 to 2010/11/21 18:06:04 /* the whole time range */ 2010-11-21 18:07:40,525 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx/adcpsect as_nav.tmp 2010-11-21 18:07:40,531 DEBUG quick_setup cal/watertrk/timslip.tmp exists 2010-11-21 18:07:40,531 DEBUG quick_setup starting in /home/data/EN488/proc/wh300 2010-11-21 18:07:40,531 DEBUG quick_setup executing commands from /home/data/EN488/proc/wh300/cal/watertrk 2010-11-21 18:07:40,531 DEBUG quick_setup running python command "timslip" 2010-11-21 18:07:40,531 DEBUG quick_subs fix_file_type: simple fix_file: ../../nav/a_en.gps reference_file: ../../nav/a_en.nav output_file: a_en_7.cal year_base= 2010 min_n_fixes= 7 /* 5 7 9 */ n_refs= 7 /* 5 7 9 */ i_ref_l0= 1 i_ref_l1= 2 /* 1 2 3 */ i_ref_r0= 5 /* 4 5 6 */ i_ref_r1= 6 /* 4 6 8 */ up_thresh= 3.0 /* m/s */ down_thresh= 3.0 /* m/s */ turn_speed= 2.0 /* m/s */ turn_thresh= 60 /* degrees */ dtmax= 360 /* seconds, for 300-second ensembles */ tolerance= 5.e-5 /* days, about 5 seconds */ grid: ensemble use_shifted_times? no 2010-11-21 18:07:40,532 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx/timslip timslip.tmp 2010-11-21 18:07:40,536 DEBUG quick_mpl Starting plot: wtcal 2010-11-21 18:07:40,538 DEBUG quick_mplplots No watertrack calibration data 2010-11-21 18:07:40,538 DEBUG quick_mpl Ending plot: wtcal 2010-11-21 18:07:40,538 DEBUG quick_asect ------------ step 18: make matlab files for plotting ------------- 2010-11-21 18:07:40,538 DEBUG quick_setup starting in /home/data/EN488/proc/wh300 2010-11-21 18:07:40,538 DEBUG quick_setup executing commands from /home/data/EN488/proc/wh300/vector 2010-11-21 18:07:40,538 DEBUG quick_setup running python command "timegrid" 2010-11-21 18:07:40,538 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx/timegrid a_en.tmp 2010-11-21 18:07:40,543 DEBUG quick_setup starting in /home/data/EN488/proc/wh300 2010-11-21 18:07:40,543 DEBUG quick_setup executing commands from /home/data/EN488/proc/wh300/vector 2010-11-21 18:07:40,543 DEBUG quick_setup running python command "as_vect" 2010-11-21 18:07:40,543 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx/adcpsect as_vect.tmp 2010-11-21 18:07:40,549 DEBUG quick_asect done making vector matfiles 2010-11-21 18:07:40,549 DEBUG quick_setup starting in /home/data/EN488/proc/wh300 2010-11-21 18:07:40,549 DEBUG quick_setup executing commands from /home/data/EN488/proc/wh300/contour 2010-11-21 18:07:40,549 DEBUG quick_setup running python command "timegrid" 2010-11-21 18:07:40,549 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx/timegrid a_en.tmp 2010-11-21 18:07:40,554 DEBUG quick_setup starting in /home/data/EN488/proc/wh300 2010-11-21 18:07:40,554 DEBUG quick_setup executing commands from /home/data/EN488/proc/wh300/contour 2010-11-21 18:07:40,554 DEBUG quick_setup running python command "as_cont" 2010-11-21 18:07:40,554 DEBUG quick_setup about to run /home/currents/programs/codas3/bin/lnx/adcpsect as_cont.tmp 2010-11-21 18:07:40,560 DEBUG quick_setup starting in /home/data/EN488/proc/wh300 2010-11-21 18:07:40,560 DEBUG quick_setup executing commands from /home/data/EN488/proc/wh300/contour 2010-11-21 18:07:40,561 DEBUG quick_setup about to run getmat -qrs -f allbins_ ../adcpdb/a_en 2010-11-21 18:07:40,571 DEBUG quick_asect done running getmat with "allbins" 2010-11-21 18:07:40,599 INFO root copying NOFIG to /home/adcp/www/figures/wh300_hcorr_plot.png 2010-11-21 18:07:40,599 INFO root copying NOFIG to /home/adcp/www/figures/thumbnails/wh300_hcorr_plot_thumb.png 2010-11-21 18:07:40,599 DEBUG root matfile is contour/contour_uv.mat 2010-11-21 18:07:40,599 INFO root copying contour/contour_uv.mat to /home/adcp/www/data/wh300_cont_uv.mat 2010-11-21 18:07:40,599 DEBUG root matfile is vector/vector_uv.mat 2010-11-21 18:07:40,600 INFO root copying vector/vector_uv.mat to /home/adcp/www/data/wh300_vect_uv.mat 2010-11-21 18:07:40,600 DEBUG root matfile is contour/contour_xy.mat 2010-11-21 18:07:40,600 INFO root copying contour/contour_xy.mat to /home/adcp/www/data/wh300_cont_xy.mat 2010-11-21 18:07:40,600 DEBUG root matfile is vector/vector_xy.mat 2010-11-21 18:07:40,600 INFO root copying vector/vector_xy.mat to /home/adcp/www/data/wh300_vect_xy.mat 2010-11-21 18:07:40,600 DEBUG root about to copy file edit/a_en.tem to /home/adcp/www/data/wh300_temp.asc 2010-11-21 18:07:40,601 INFO root copying edit/a_en.tem to /home/adcp/www/data/wh300_temp.asc 2010-11-21 18:07:40,601 INFO root Ending quick_adcp.py 2010-11-21 18:07:40,660 DEBUG quick_setup killed matlab engine