Hi Pat,

 I just put WHOTS 1 to 7 VMCM NetCDF files in your ftp site in
incoming/caldwell. I reformated these files in NetCDF 4 with OceanSITES
convention. Please replace the files that we sent you before. 

 I'll be on a HOT cruise this coming week, but let me or Craig know if
you see any problem with the data.

Gracias!
Fernando

On Wed, 2012-05-30 at 11:58, Pat Caldwell wrote:
> > Hi Fernando,
> > 
> > Craig told me you were at sea but maybe this is something you know off 
> > hand.  At your convenience with a reply, I know you're busy.
> > 
> > Do you know if the netCDF files for the VMCM set are of a particular 
> > convention?  There is no convention designation in the files (via 
> > ncdump).  I see from the WHOTS site, there are some netCDFs in the 
> > OceanSITES format, (cut and paste here:)
> > 
> > 
> > // global attributes:
> > 		:data_type = "OceanSites time-series data" ;
> > 		:Conventions = "CF 1.4, OceanSITES 1.2" ;
> > 		:netcdf_version = "3.5" ;
> > 		:format_version = "1.2" ;
> > 		:standard_name_vocabulary = "CF-1.4" ;
> > 
> > 
> > Do you know if this is also the conventions for the VMCM files (deployments 1-7, 10&30m)?
> > 
> > Thanks, Pat
> > 
> > 
> > 
> > 
> > -------- Original Message --------
> > Subject: 	Re: WHOTS VMCM Data
> > Date: 	Thu, 08 Mar 2012 12:42:19 -1000 (HST)
> > References: 
> > 
> > 
> > Pat,
> > 
> > Done.
> > 
> > You'll see that there are two files for each deployment as each
> > file has a VMCM (also known as a NGVM) at 10 and 30 meters.  Filenames
> > specify the depths.
> > 
> > Each NetCDF file has supporting comments and metadata.  Let me know
> > if you need more though than that.
> > 
> > Thanks,
> > Craig
> > 
> > 
>> > > Hey Craig,
>> > >
>> > > Awesome, thanks, here she blows:
>> > >
>> > > ftp://kia.soest.hawaii.edu/incoming/caldwell/
>> > >
>> > > At your convenience,
>> > >
>> > > Cheers, Pat
>> > >
>> > > On Thu, Mar 8, 2012 at 10:04 AM, 
>> > >
>>> > >> Hello Pat,
>>> > >>
>>> > >> We are finally closing the loop on the WHOTS data that we've
>>> > >> had discussions about.
>>> > >>
>>> > >> I now have the Vector Measuring Current Meter (VMCM) data available
>>> > >> for all 7 mooring deployments.  The data are in NetCDF files.
>>> > >>
>>> > >> Should I ftp into your area?  If so, you'll have to remind me
>>> > >> again of the location.
>>> > >>
>>> > >> Thanks,
>>> > >> Craig
>>> > >>
>>> > >>
>> > >
> > 
> > 
> >