#
#   A Narrowband configuration file
#   for UHDAS must contain only the commands listed here,
#   although the values may vary.  This file is not
#   necessary; defaults are set in rdi_setup.py,
#   which is called by DAS.py.  Additional commands may
#   be specified in /home/adcp/config/sensor_cfg.py.
#

#   The Narrowband requires *exactly* the number of digits
#   given in the examples.

I08          # Pulse length in meters; I08 is 8-m pulse
J080         # Blanking in decimeters; e.g., J080 for 8-m blank
L3           # base-2 log of cell length in meters; L3 is 8-m cell
Q050         # Number of cells, e.g. Q050 for 50 cells
FH00001     # Bottom Track: FH00255 is off, FH00001 is on