2010-11-06 23:14:55,152 DEBUG root about to write control file parameters to --yearbase 2010 --pingtype nb --cfgbase RR1016 --cruisename RR1016 --instclass os --instname os75 --dbname a_rr --datatype uhdas --datadir /home/data/RR1016/raw/os75 --cfgpath /home/data/RR1016/proc/os75nb/config --ens_len 300 --ping_headcorr --hcorr_inst ashtech --use_topo4edit ## using jitter defaults ## not using matplotlib --delblks 1 --skip_avg --find_pflags --hidedisplay --top_plotbin 1 --quiet --auto --npycalc all --mplplots all 2010-11-06 23:14:55,152 DEBUG quick_adcp sys.argv = /home/currents/programs/uhdas/scripts/run_quick.py -d os75nb --npycalc all --mplplots all 2010-11-06 23:14:55,153 DEBUG quick_adcp ------processor dictionary:------ __doc__ __init__ __module__ adcpcal aedit aflagit_setup as_cont as_nav as_vect asetup ashrot btcaluv catnav check_opts cleanup copy_ensfile ddtime def_qlist get_asvars get_cmd_timerange get_data2load_timerange get_filelist get_gyrodh get_headcorrstats get_lstblk_tr get_matcfgstr get_remaining_times get_seapath11dh get_time_range getmat ldcodas list2matcell llgrid loadens loadhdss loadlta loadping loaduh lst_btrk lst_conf lst_hdg lst_temp mpltest opts overlapping plot_lastensq plotbtcal_mpl plothcorr_mpl plotnav_mpl plotrefl_mpl plottemp plottemp_mpl plotwtcal_mpl print_attlog putnav refabs refabsbt refplot refsm rotate rotated run_adcpsect run_applyedit run_calc run_calib run_editsetup run_findpflags run_getheadcorr run_getnav run_listblocks run_loaddata run_lstconfig run_lsttemp run_matfiles run_plotter run_putnav run_rawsetup run_refabs run_refplots run_refsm run_refsm_npy run_rotate run_scandata run_setflags run_smoothr run_updategbin run_xducerxy scanping scanraw setflags smoothr startmatlab timegrid timslip ubprint update_gbin user_defined_headfunc xducerxy zapsetup 2010-11-06 23:14:55,153 DEBUG quick_adcp progdir = /home/currents/programs 2010-11-06 23:14:55,153 DEBUG quick_adcp binos = lnx 2010-11-06 23:14:55,153 INFO quick_setup NOTE: proc_yearbase defaulting to yearbase. specify if different 2010-11-06 23:14:55,154 DEBUG quick_setup yearbase is 2010, proc_yearbase is 2010 2010-11-06 23:14:55,154 DEBUG quick_setup numpy calculations to run: refsm 2010-11-06 23:14:55,154 DEBUG quick_setup mplplots to run: temp, nav, refl, hcorr, wtcal, btcal 2010-11-06 23:14:55,154 DEBUG quick_setup processing data logged with uhdas: 2010-11-06 23:14:55,154 DEBUG quick_setup datatype is uhdas 2010-11-06 23:14:55,154 DEBUG quick_setup pingtype is nb 2010-11-06 23:14:55,154 DEBUG quick_setup instclass is os 2010-11-06 23:14:55,154 DEBUG quick_setup no post-processing heading correction will be used 2010-11-06 23:14:55,154 DEBUG quick_setup transducer depth set in *_cfg.m file 2010-11-06 23:14:55,154 DEBUG quick_subs matcfgstr is: % begin "matcfgstr" string, created by quick_adcp.py instclass = os; instname = 'os75'; pingtype = 'nb'; proc_yearbase = 2010; yearbase = 2010; cfg =get_uhdascfg('cfgbase' , 'RR1016',... 'cfgpath' , '/home/data/RR1016/proc/os75nb/config',... 'instclass', instclass,... 'instname' , instname,... 'proc_yearbase', proc_yearbase,... 'yearbase', yearbase,... 'pingtype' , pingtype); gbindirbase = cfg.gbindirbase; allparams = cfg.allparams; % end "matcfgstr" string, created by quick_adcp.py 2010-11-06 23:14:55,154 DEBUG quick_setup ------- starting Matlab engine ------- 2010-11-06 23:14:55,154 DEBUG quick_setup ['/home/currents/programs/matlab'] 2010-11-06 23:14:55,156 DEBUG call_matlab starting to wait for initial prompt 2010-11-06 23:14:57,327 ERROR call_matlab No prompt after 2 seconds Traceback (most recent call last): File "/home/currents/programs/pycurrents/system/call_matlab.py", line 199, in __init__ s = self.run_string("", timeout=15) # Wait for prompt. File "/home/currents/programs/pycurrents/system/call_matlab.py", line 321, in run_string raise MatlabCrash MatlabCrash 2010-11-06 23:14:58,328 ERROR call_matlab Matlab process ended with code 1 2010-11-06 23:14:58,328 ERROR root running quick_adcp Traceback (most recent call last): File "/home/currents/programs/uhdas/scripts/run_quick.py", line 184, in quick_adcp(['--cntfile', cntfile_proc]) File "/home/currents/programs/pycurrents/adcp/quick_adcp.py", line 1031, in quick_adcp proc.startmatlab() File "/home/currents/programs/pycurrents/adcp/quick_setup.py", line 177, in startmatlab timeout = self.opts['timeout_secs']) File "/home/currents/programs/pycurrents/system/call_matlab.py", line 210, in __init__ raise LicenseManagerError(output) LicenseManagerError: Output received during startup attempt: License Manager Error -15. Cannot connect to license server The server (lmgrd) has not been started yet, or the wrong port@host or license file is being used, or the port or hostname in the license file has been changed. Feature: MATLAB Server name: currents License path: /usr/local/matlabR14.3/etc/license.dat:/usr/local/matlabR14.3 - /etc/*.lic FLEXlm error: -15,570. System Error: 111 "Connection refused" For further information, refer to the FLEXlm End User Manual, available at "www.macrovision.com". MATLAB is unable to connect to the license server. Make sure the SERVER line in your license file is correct. Have your MATLAB administrator verify that the license manager is running and validate network services. For more information, see The MathWorks Support page at http://www.mathworks.com/support and search for "license manager error -15"