* Sea-Bird SBE 9 Data File:
* FileName = C:\CTD\RR1004\Cast32.hex
* Software Version Seasave V 7.18b
* Temperature SN = 2202
* Conductivity SN = 2593
* Number of Bytes Per Scan = 44
* Number of Voltage Words = 5
* Number of Scans Averaged by the Deck Unit = 1
* Append System Time to Every Scan
* System UpLoad Time = Mar 30 2010 18:48:22
* NMEA Latitude = 21 04.73 N
* NMEA Longitude = 123 10.78 E
* NMEA UTC (Time) = Mar 30 2010 18:48:23
* Store Lat/Lon Data = Append to Every Scan
** Ship: Revelle 20100330
**
**
** st A2
** lat 21.04.731N
** lon 123.10.785E
** 5651m
# nquan = 19
# nvalues = 4                           
# units = specified
# name 0 = latitude: Latitude [deg]
# name 1 = longitude: Longitude [deg]
# name 2 = t090C: Temperature [ITS-90, deg C]
# name 3 = c0S/m: Conductivity [S/m]
# name 4 = sal00: Salinity, Practical [PSU]
# name 5 = depSM: Depth [salt water, m]
# name 6 = prDM: Pressure, Digiquartz [db]
# name 7 = t190C: Temperature, 2 [ITS-90, deg C]
# name 8 = c1S/m: Conductivity, 2 [S/m]
# name 9 = sal11: Salinity, Practical, 2 [PSU]
# name 10 = bat: Beam Attenuation, Chelsea/Seatech [1/m]
# name 11 = xmiss: Beam Transmission, Chelsea/Seatech [%]
# name 12 = altM: Altimeter [m]
# name 13 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/kg]
# name 14 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 15 = spar: SPAR/Surface Irradiance
# name 16 = pumps: Pump Status
# name 17 = nbin: number of scans per bin
# name 18 = flag: flag
# span 0 =   21.07884,   21.07886       
# span 1 =  123.17976,  123.17976       
# span 2 =    25.1664,    25.1808       
# span 3 =   5.301179,   5.303173       
# span 4 =    34.8234,    34.8275       
# span 5 =     11.825,     13.463       
# span 6 =     11.899,     13.546       
# span 7 =    25.1661,    25.1796       
# span 8 =   5.300035,   5.301956       
# span 9 =    34.8153,    34.8195       
# span 10 =    13.8155,    13.8155      
# span 11 =     0.0000,     0.0000      
# span 12 =      98.44,      98.66      
# span 13 =    197.955,    198.209      
# span 14 =     4.5351,     4.5409      
# span 15 = 0.0000e+00, 0.0000e+00      
# span 16 =          1,          1      
# span 17 =          3,        734      
# span 18 = 0.0000e+00, 0.0000e+00      
# interval = decibars: 1                
# start_time = Mar 30 2010 18:48:22 [System UTC, first data scan.]
# bad_flag = -9.990e-29
# <Sensors count="15" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>2202</SerialNumber>
#       <CalibrationDate>25-Nov-2009 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>4.35804505e-003</A>
#       <B>6.45422768e-004</B>
#       <C>2.29192439e-005</C>
#       <D>2.09772905e-006</D>
#       <F0_Old>1000.000</F0_Old>
#       <G>4.35784669e-003</G>
#       <H>6.45211054e-004</H>
#       <I>2.28866368e-005</I>
#       <J>2.09619953e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>2593</SerialNumber>
#       <CalibrationDate>10-Nov-09 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.44292510e+000</G>
#         <H>1.37262090e+000</H>
#         <I>-1.67741089e-003</I>
#         <J>1.96724665e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0401</SerialNumber>
#       <CalibrationDate>04-JUN-08</CalibrationDate>
#       <C1>-4.587651e+004</C1>
#       <C2>1.301851e-001</C2>
#       <C3>1.415793e-002</C3>
#       <D1>3.976239e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>2.998605e+001</T1>
#       <T2>-2.551978e-004</T2>
#       <T3>4.363724e-006</T3>
#       <T4>-5.746039e-009</T4>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.117000e-002</AD590M>
#       <AD590B>-8.668320e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>2309</SerialNumber>
#       <CalibrationDate>25-Nov-2009 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>4.35730172e-003</A>
#       <B>6.43636784e-004</B>
#       <C>2.31939079e-005</C>
#       <D>2.10475892e-006</D>
#       <F0_Old>1000.000</F0_Old>
#       <G>4.35710362e-003</G>
#       <H>6.43425755e-004</H>
#       <I>2.31613871e-005</I>
#       <J>2.10321716e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>2766</SerialNumber>
#       <CalibrationDate>10-Nov-09 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.97526401e+000</G>
#         <H>1.40033902e+000</H>
#         <I>-6.93707989e-004</I>
#         <J>1.18340517e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Fluorometer, Seapoint -->
#     <FluoroSeapointSensor SensorID="11" >
#       <SerialNumber>SCF3003</SerialNumber>
#       <CalibrationDate>6/10/2008</CalibrationDate>
#       <!-- The following is an array index, not the actual gain setting. -->
#       <GainSetting>0</GainSetting>
#       <Offset>0.000</Offset>
#     </FluoroSeapointSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Free -->
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Transmissometer, Chelsea/Seatech -->
#     <TransChelseaSeatechWetlabCStarSensor SensorID="59" >
#       <SerialNumber>CST-1176DR</SerialNumber>
#       <CalibrationDate>10/7/2008</CalibrationDate>
#       <M>0.0000</M>
#       <B>0.0000</B>
#       <PathLength>0.000</PathLength>
#     </TransChelseaSeatechWetlabCStarSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>1184</SerialNumber>
#       <CalibrationDate>7/5/2005</CalibrationDate>
#       <ScaleFactor>15.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Free -->
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>0060</SerialNumber>
#       <CalibrationDate>08-Dec-09p</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>4.1790e-001</Soc>
#         <offset>-0.4856</offset>
#         <A>-2.4742e-003</A>
#         <B> 1.2995e-004</B>
#         <C>-1.9533e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92630e-004</D1>
#         <D2>-4.64800e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.3100</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Free -->
#   </sensor>
#   <sensor Channel="14" >
#     <!-- SPAR voltage, Unavailable -->
#   </sensor>
#   <sensor Channel="15" >
#     <!-- SPAR voltage, SPAR/Surface Irradiance -->
#     <SPAR_Sensor SensorID="51" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ConversionFactor>0.00000000</ConversionFactor>
#       <RatioMultiplier>0.00000000</RatioMultiplier>
#     </SPAR_Sensor>
#   </sensor>
# </Sensors>
# datcnv_date = Feb 12 2018 20:59:16, 7.23.2 [datcnv_vars = 17]
# datcnv_in = Z:\data\r2r\cruise\RR1004\fileset\102102\data\cast32.hex Z:\data\r2r\cruise\RR1004\fileset\102102\data\cast32.CON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# datcnv_ox_tau_correction = yes
# celltm_date = Feb 12 2018 20:59:22, 7.23.2
# celltm_in = Z:\data\local\cruise\RR1004\products\r2rctd\cast32.cnv
# celltm_alpha = 0.0300, 0.0300
# celltm_tau = 7.0000, 7.0000
# celltm_temp_sensor_use_for_cond = primary, secondary
# binavg_date = Feb 12 2018 20:59:25, 7.23.2
# binavg_in = Z:\data\local\cruise\RR1004\products\r2rctd\cast32.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
   21.07886  123.17976    25.1808   5.303173    34.8275     11.825     11.899    25.1796   5.301956    34.8195    13.8155     0.0000      98.66    198.209     4.5409 0.0000e+00          1         45 0.0000e+00
   21.07885  123.17976    25.1725   5.301921    34.8244     12.805     12.885    25.1722   5.300789    34.8162    13.8155     0.0000      98.44    197.968     4.5354 0.0000e+00          1        734 0.0000e+00
   21.07884  123.17976    25.1664   5.301179    34.8234     13.463     13.546    25.1661   5.300035    34.8153    13.8155     0.0000      98.66    198.140     4.5394 0.0000e+00          1          3 0.0000e+00
   21.07884  123.17976    25.1708   5.301623    34.8234     12.968     13.049    25.1699   5.300440    34.8153    13.8155     0.0000      98.66    197.955     4.5351 0.0000e+00          1        329 0.0000e+00