* Sea-Bird SBE 9 Data File:
* FileName = C:\CTD\RR0912\009.hex
* Software Version Seasave V 7.18b
* Temperature SN = 2166
* Conductivity SN = 2115
* Number of Bytes Per Scan = 44
* Number of Voltage Words = 5
* Number of Scans Averaged by the Deck Unit = 1
* Append System Time to Every Scan
* System UpLoad Time = Sep 25 2009 16:00:48
* NMEA Latitude = 19 30.13 N
* NMEA Longitude = 124 29.68 E
* NMEA UTC (Time) = Sep 25 2009 16:00:49
* Store Lat/Lon Data = Append to Every Scan
** Ship: Revelle- QPE C2
**  009
**
# nquan = 18
# nvalues = 8                           
# units = specified
# name 0 = latitude: Latitude [deg]
# name 1 = longitude: Longitude [deg]
# name 2 = t090C: Temperature [ITS-90, deg C]
# name 3 = c0S/m: Conductivity [S/m]
# name 4 = sal00: Salinity, Practical [PSU]
# name 5 = depSM: Depth [salt water, m]
# name 6 = prDM: Pressure, Digiquartz [db]
# name 7 = t190C: Temperature, 2 [ITS-90, deg C]
# name 8 = c1S/m: Conductivity, 2 [S/m]
# name 9 = sal11: Salinity, Practical, 2 [PSU]
# name 10 = par: PAR/Irradiance, Biospherical/Licor
# name 11 = altM: Altimeter [m]
# name 12 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/kg]
# name 13 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 14 = spar: SPAR/Surface Irradiance
# name 15 = pumps: Pump Status
# name 16 = nbin: number of scans per bin
# name 17 = flag: flag
# span 0 =   19.50202,   19.50220       
# span 1 =  124.49298,  124.49472       
# span 2 =    29.5615,    29.5632       
# span 3 =   5.676052,   5.676593       
# span 4 =    34.2289,    34.2321       
# span 5 =      6.233,     12.534       
# span 6 =      6.271,     12.612       
# span 7 =    29.5599,    29.5619       
# span 8 =   5.676972,   5.677455       
# span 9 =    34.2363,    34.2389       
# span 10 = 1.0000e-12, 1.0000e-12      
# span 11 =       1.58,      90.26      
# span 12 =    186.180,    187.591      
# span 13 =     4.2576,     4.2899      
# span 14 = 0.0000e+00, 0.0000e+00      
# span 15 =          1,          1      
# span 16 =         20,        843      
# span 17 = 0.0000e+00, 0.0000e+00      
# interval = decibars: 1                
# start_time = Sep 25 2009 16:00:48 [System UTC, first data scan.]
# bad_flag = -9.990e-29
# <Sensors count="15" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>2166</SerialNumber>
#       <CalibrationDate>08-July-2009</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.34261320e-003</G>
#       <H>6.45746033e-004</H>
#       <I>2.31502326e-005</I>
#       <J>2.14854169e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>2115</SerialNumber>
#       <CalibrationDate>16-June-09</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.89959843e+000</G>
#         <H>1.43326748e+000</H>
#         <I>-2.65674380e-003</I>
#         <J>2.60797119e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0381</SerialNumber>
#       <CalibrationDate>31-July-08</CalibrationDate>
#       <C1>-5.136813e+004</C1>
#       <C2>1.927312e-001</C2>
#       <C3>1.549040e-002</C3>
#       <D1>4.234600e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.002156e+001</T1>
#       <T2>-2.996327e-004</T2>
#       <T3>4.043490e-006</T3>
#       <T4>2.578570e-009</T4>
#       <Slope>1.00002000</Slope>
#       <Offset>-0.15950</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.147000e-002</AD590M>
#       <AD590B>-8.552480e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>2059</SerialNumber>
#       <CalibrationDate>08-July-09</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.12185751e-003</G>
#       <H>6.19538529e-004</H>
#       <I>1.99420519e-005</I>
#       <J>2.20873980e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>3429</SerialNumber>
#       <CalibrationDate>16-Jun-09 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.87425077e+000</G>
#         <H>1.52012343e+000</H>
#         <I>-2.47960918e-003</I>
#         <J>2.75260355e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, PAR/Irradiance, Biospherical/Licor -->
#     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
#       <SerialNumber>4643</SerialNumber>
#       <CalibrationDate>03/12/09</CalibrationDate>
#       <M>1.00000000</M>
#       <B>0.00000000</B>
#       <CalibrationConstant>2141327623.09999895</CalibrationConstant>
#       <Multiplier>1.00000000</Multiplier>
#       <Offset>-0.66270000</Offset>
#     </PAR_BiosphericalLicorChelseaSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Fluorometer, Seapoint -->
#     <FluoroSeapointSensor SensorID="11" >
#       <SerialNumber>2964</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <!-- The following is an array index, not the actual gain setting. -->
#       <GainSetting>2</GainSetting>
#       <Offset>0.000</Offset>
#     </FluoroSeapointSensor>
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Free -->
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>1182</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>15.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Free -->
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>430848</SerialNumber>
#       <CalibrationDate>12/Jun/09</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>4.9270e-001</Soc>
#         <offset>-0.5079</offset>
#         <A>-7.8780e-004</A>
#         <B> 1.5746e-004</B>
#         <C>-2.5548e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92630e-004</D1>
#         <D2>-4.64800e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 2.0000</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Free -->
#   </sensor>
#   <sensor Channel="14" >
#     <!-- SPAR voltage, Unavailable -->
#   </sensor>
#   <sensor Channel="15" >
#     <!-- SPAR voltage, SPAR/Surface Irradiance -->
#     <SPAR_Sensor SensorID="51" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ConversionFactor>0.00000000</ConversionFactor>
#       <RatioMultiplier>0.00000000</RatioMultiplier>
#     </SPAR_Sensor>
#   </sensor>
# </Sensors>
# datcnv_date = Feb 18 2018 20:11:50, 7.23.2 [datcnv_vars = 16]
# datcnv_in = Z:\data\r2r\cruise\RR0912\fileset\102100\data\009.hex Z:\data\r2r\cruise\RR0912\fileset\102100\data\009.CON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# datcnv_ox_tau_correction = yes
# celltm_date = Feb 18 2018 20:11:54, 7.23.2
# celltm_in = Z:\data\local\cruise\RR0912\products\r2rctd\009.cnv
# celltm_alpha = 0.0300, 0.0300
# celltm_tau = 7.0000, 7.0000
# celltm_temp_sensor_use_for_cond = primary, secondary
# binavg_date = Feb 18 2018 20:11:58, 7.23.2
# binavg_in = Z:\data\local\cruise\RR0912\products\r2rctd\009.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
   19.50220  124.49472    29.5615   5.676052    34.2289     12.534     12.612    29.5599   5.676972    34.2363 1.0000e-12      67.10    186.180     4.2576 0.0000e+00          1         20 0.0000e+00
   19.50218  124.49458    29.5627   5.676309    34.2300     11.959     12.032    29.5613   5.677216    34.2371 1.0000e-12      78.35    187.047     4.2775 0.0000e+00          1        843 0.0000e+00
   19.50214  124.49431    29.5632   5.676459    34.2308     11.093     11.161    29.5618   5.677321    34.2377 1.0000e-12      90.26    187.469     4.2871 0.0000e+00          1        485 0.0000e+00
   19.50205  124.49358    29.5631   5.676593    34.2321     10.063     10.125    29.5619   5.677455    34.2389 1.0000e-12      75.38    187.457     4.2868 0.0000e+00          1        442 0.0000e+00
   19.50202  124.49317    29.5621   5.676305    34.2311      9.193      9.250    29.5611   5.677199    34.2379 1.0000e-12      76.41    187.591     4.2899 0.0000e+00          1        247 0.0000e+00
   19.50202  124.49304    29.5628   5.676306    34.2309      8.215      8.266    29.5614   5.677167    34.2377 1.0000e-12      19.01    186.772     4.2711 0.0000e+00          1        111 0.0000e+00
   19.50202  124.49300    29.5619   5.676203    34.2313      6.778      6.819    29.5608   5.677057    34.2379 1.0000e-12      62.72    187.160     4.2800 0.0000e+00          1         33 0.0000e+00
   19.50202  124.49298    29.5624   5.676247    34.2313      6.233      6.271    29.5605   5.677055    34.2382 1.0000e-12       1.58    187.328     4.2839 0.0000e+00          1         49 0.0000e+00