* Sea-Bird SBE 9 Data File:
* FileName = C:\CTD\Thurber\deckTest.hex
* Software Version Seasave V 7.18b
* Temperature SN = 4209
* Conductivity SN = 1879
* Number of Bytes Per Scan = 40
* Number of Voltage Words = 5
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Feb 17 2010 18:51:38
* NMEA Latitude = 33 02.16 S
* NMEA Longitude = 071 37.53 W
* NMEA UTC (Time) = Feb 17 2010 18:51:39
* Store Lat/Lon Data = Append to Every Scan
** SHIP:RV-Melville TEST
** CRUISE TEST
** CAST: TEST
** DEPTH: TEST
** RLT DECK TEST 2/17/2010
# nquan = 16
# nvalues = 0                           
# units = specified
# name 0 = t090C: Temperature [ITS-90, deg C]
# name 1 = c0S/m: Conductivity [S/m]
# name 2 = sal00: Salinity, Practical [PSU]
# name 3 = depSM: Depth [salt water, m]
# name 4 = prDM: Pressure, Digiquartz [db]
# name 5 = t190C: Temperature, 2 [ITS-90, deg C]
# name 6 = c1S/m: Conductivity, 2 [S/m]
# name 7 = sal11: Salinity, Practical, 2 [PSU]
# name 8 = altM: Altimeter [m]
# name 9 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/Kg]
# name 10 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 11 = bat: Beam Attenuation, Chelsea/Seatech [1/m]
# name 12 = xmiss: Beam Transmission, Chelsea/Seatech [%]
# name 13 = spar: SPAR/Surface Irradiance
# name 14 = nbin: number of scans per bin
# name 15 = flag: flag
# span 0 =     0.0000,     0.0000       
# span 1 =   0.000000,   0.000000       
# span 2 =     0.0000,     0.0000       
# span 3 =      0.000,      0.000       
# span 4 =      0.000,      0.000       
# span 5 =     0.0000,     0.0000       
# span 6 =   0.000000,   0.000000       
# span 7 =     0.0000,     0.0000       
# span 8 =       0.00,       0.00       
# span 9 =      0.000,      0.000       
# span 10 =    0.00000,    0.00000      
# span 11 =     0.0000,     0.0000      
# span 12 =     0.0000,     0.0000      
# span 13 = 0.0000e+00, 0.0000e+00      
# span 14 =          0,          0      
# span 15 = 0.0000e+00, 0.0000e+00      
# interval = meters: 2                  
# start_time = Feb 17 2010 18:51:39 [NMEA time, header]
# bad_flag = -9.990e-29
# <Sensors count="15" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4209</SerialNumber>
#       <CalibrationDate>16-Jul-2009 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.37684379e-003</G>
#       <H>6.44765928e-004</H>
#       <I>2.21046397e-005</I>
#       <J>1.77765728e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>1879</SerialNumber>
#       <CalibrationDate>03-Sep-08 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-4.15538272e+000</G>
#         <H>5.38908586e-001</H>
#         <I>-7.40466923e-004</I>
#         <J>6.52677708e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0830</SerialNumber>
#       <CalibrationDate>10-JUL-09</CalibrationDate>
#       <C1>-4.071411e+004</C1>
#       <C2>-8.565325e-001</C2>
#       <C3>1.310380e-002</C3>
#       <D1>3.227600e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.008875e+001</T1>
#       <T2>-5.634506e-004</T2>
#       <T3>4.316740e-006</T3>
#       <T4>2.655130e-009</T4>
#       <Slope>0.99985270</Slope>
#       <Offset>0.88776</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.290360e-002</AD590M>
#       <AD590B>-8.201883e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4953</SerialNumber>
#       <CalibrationDate>16-Jul-2009 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.37036366e-003</G>
#       <H>6.44835786e-004</H>
#       <I>2.16475014e-005</I>
#       <J>1.72136577e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>1919</SerialNumber>
#       <CalibrationDate>31-Oct-08 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-3.98985643e+000</G>
#         <H>5.25239024e-001</H>
#         <I>-9.59854578e-004</I>
#         <J>7.64553087e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Fluorometer, Seapoint -->
#     <FluoroSeapointSensor SensorID="11" >
#       <SerialNumber>2964</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <!-- The following is an array index, not the actual gain setting. -->
#       <GainSetting>2</GainSetting>
#       <Offset>0.000</Offset>
#     </FluoroSeapointSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>41132</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>15.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>1136</SerialNumber>
#       <CalibrationDate>28-May-08p</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>3.6520e-001</Soc>
#         <offset>-0.5249</offset>
#         <A>-8.9762e-004</A>
#         <B> 1.5459e-004</B>
#         <C>-3.4405e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92630e-004</D1>
#         <D2>-4.64800e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.6300</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Transmissometer, Chelsea/Seatech -->
#     <TransChelseaSeatechWetlabCStarSensor SensorID="59" >
#       <SerialNumber>493DR</SerialNumber>
#       <CalibrationDate>12 DEC 2008</CalibrationDate>
#       <M>19.5100</M>
#       <B>-1.1200</B>
#       <PathLength>0.250</PathLength>
#     </TransChelseaSeatechWetlabCStarSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Free -->
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Free -->
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Free -->
#   </sensor>
#   <sensor Channel="14" >
#     <!-- SPAR voltage, Unavailable -->
#   </sensor>
#   <sensor Channel="15" >
#     <!-- SPAR voltage, SPAR/Surface Irradiance -->
#     <SPAR_Sensor SensorID="51" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ConversionFactor>0.00000000</ConversionFactor>
#       <RatioMultiplier>0.00000000</RatioMultiplier>
#     </SPAR_Sensor>
#   </sensor>
# </Sensors>
# datcnv_date = Jan 31 2014 00:39:10, 7.21d [datcnv_vars = 14]
# datcnv_in = U:\temp\data\MV1003_109705_ctd\decktest.hex U:\temp\data\MV1003_109705_ctd\decktest.CON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# datcnv_ox_tau_correction = yes
# binavg_date = Jan 31 2014 00:39:11, 7.21d
# binavg_in = T:\processed\MV1003_109705_ctd\decktest.cnv
# binavg_bintype = meters
# binavg_binsize = 2
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*