* Sea-Bird SBE 9 Data File:
* FileName = C:\CTD\Gordon09\test1.hex
* Software Version Seasave V 7.18b
* Temperature SN = 2202
* Conductivity SN = 2659
* Number of Bytes Per Scan = 37
* Number of Voltage Words = 4
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Mar 06 2009 00:42:10
* NMEA Latitude = 08 37.29 N
* NMEA Longitude = 122 59.82 E
* NMEA UTC (Time) = Mar 06 2009 00:42:12
* Store Lat/Lon Data = Append to Every Scan
** SHIP:RV-Melville
** CRUISE:Gordon 09
** CAST: 045
** DEPTH: 1517
# nquan = 15
# nvalues = 0                           
# units = specified
# name 0 = t090C: Temperature [ITS-90, deg C]
# name 1 = c0S/m: Conductivity [S/m]
# name 2 = sal00: Salinity, Practical [PSU]
# name 3 = depSM: Depth [salt water, m]
# name 4 = prDM: Pressure, Digiquartz [db]
# name 5 = t190C: Temperature, 2 [ITS-90, deg C]
# name 6 = c1S/m: Conductivity, 2 [S/m]
# name 7 = sal11: Salinity, Practical, 2 [PSU]
# name 8 = altM: Altimeter [m]
# name 9 = bat: Beam Attenuation, Chelsea/Seatech [1/m]
# name 10 = xmiss: Beam Transmission, Chelsea/Seatech [%]
# name 11 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/Kg]
# name 12 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 13 = nbin: number of scans per bin
# name 14 = flag: flag
# span 0 =     0.0000,     0.0000       
# span 1 =   0.000000,   0.000000       
# span 2 =     0.0000,     0.0000       
# span 3 =      0.000,      0.000       
# span 4 =      0.000,      0.000       
# span 5 =     0.0000,     0.0000       
# span 6 =   0.000000,   0.000000       
# span 7 =     0.0000,     0.0000       
# span 8 =       0.00,       0.00       
# span 9 =     0.0000,     0.0000       
# span 10 =     0.0000,     0.0000      
# span 11 =      0.000,      0.000      
# span 12 =    0.00000,    0.00000      
# span 13 =          0,          0      
# span 14 = 0.0000e+00, 0.0000e+00      
# interval = meters: 2                  
# start_time = Mar 06 2009 00:42:12 [NMEA time, header]
# bad_flag = -9.990e-29
# <Sensors count="13" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>2202</SerialNumber>
#       <CalibrationDate>06-Nov-08 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.35825029e-003</G>
#       <H>6.46084283e-004</H>
#       <I>2.35180788e-005</I>
#       <J>2.24306635e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>2659</SerialNumber>
#       <CalibrationDate>07-Nov-08 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.01140585e+001</G>
#         <H>1.42513083e+000</H>
#         <I>-8.98867339e-004</I>
#         <J>1.31973934e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0381</SerialNumber>
#       <CalibrationDate>31-Jul-08 </CalibrationDate>
#       <C1>-5.136813e+004</C1>
#       <C2>1.927312e-001</C2>
#       <C3>1.549040e-002</C3>
#       <D1>4.234600e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.002156e+001</T1>
#       <T2>-2.996327e-004</T2>
#       <T3>4.043490e-006</T3>
#       <T4>2.578570e-009</T4>
#       <Slope>1.00001789</Slope>
#       <Offset>-0.15951</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.147000e-002</AD590M>
#       <AD590B>-8.552480e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>2309</SerialNumber>
#       <CalibrationDate>04-Nov-08 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.35734812e-003</G>
#       <H>6.44002052e-004</H>
#       <I>2.35792987e-005</I>
#       <J>2.20323242e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>2818</SerialNumber>
#       <CalibrationDate>31-Oct-08 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.07664488e+001</G>
#         <H>1.47510421e+000</H>
#         <I>5.86027090e-004</I>
#         <J>2.65114172e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Fluorometer, Seapoint -->
#     <FluoroSeapointSensor SensorID="11" >
#       <SerialNumber>SCF2964</SerialNumber>
#       <CalibrationDate>01-Dec-2007</CalibrationDate>
#       <!-- The following is an array index, not the actual gain setting. -->
#       <GainSetting>2</GainSetting>
#       <Offset>0.000</Offset>
#     </FluoroSeapointSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Free -->
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>15.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Transmissometer, Chelsea/Seatech -->
#     <TransChelseaSeatechWetlabCStarSensor SensorID="59" >
#       <SerialNumber>CST 1094DR</SerialNumber>
#       <CalibrationDate>Dec 17 2008</CalibrationDate>
#       <M>20.0000</M>
#       <B>0.0000</B>
#       <PathLength>0.250</PathLength>
#     </TransChelseaSeatechWetlabCStarSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Free -->
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>0197</SerialNumber>
#       <CalibrationDate>12-Sep-08p</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>4.9950e-001</Soc>
#         <offset>-0.5006</offset>
#         <A>-6.1194e-003</A>
#         <B> 3.8142e-004</B>
#         <C>-4.8578e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92630e-004</D1>
#         <D2>-4.64800e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.0700</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Free -->
#   </sensor>
# </Sensors>
# datcnv_date = Jan 31 2014 17:37:31, 7.21d [datcnv_vars = 13]
# datcnv_in = U:\temp\data\MV0903_102116_ctd\test1.hex U:\temp\data\MV0903_102116_ctd\test1.CON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# datcnv_ox_tau_correction = yes
# binavg_date = Jan 31 2014 17:37:31, 7.21d
# binavg_in = T:\processed\MV0903_102116_ctd\test1.cnv
# binavg_bintype = meters
# binavg_binsize = 2
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*